Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de catalizadores bimetálicos Ni-Co para us uso en la descomposición catalítica de biogás

  • Llobet, Saúl de
  • Pinilla Ibarz, José Luis
  • Moliner Álvarez, Rafael
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión de la Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fondos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R). S. de Llobet agradece a la Diputación General de Aragón la beca de doctorado. J.L. Pinilla agradece al MINECO su contrato Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Influencia de la relación Fe/Mo en catalizadores para la obtención de nanotubos de carbono con distinta distribución de diámetros

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Póster presentado en la Reunión Sociedad Española de Catálisis 2015 (SECAT 2015), celebrada en Barcelona del 13-15 de julio de 2015., Los autores agradecen a los fonos FEDER y al Ministerio de Economía y Competitividad (MINECO) el apoyo económico en los proyectos ENE2011-28318-C03-01 y ENE2014-52189-C2-1-R. DT agradece la adjudicación de su beca de doctorado bajo el proyecto ENE2011-28318-C03-01. JLP agradece al MINECO por su contrato de investigación Ramón y Cajal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Síntesis y caracterización electroquímica de materiales híbridos basados en nanofibras de carbono recubiertas de sulfuro de molibdeno

  • Ochoa, Elba
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
  • Cuesta Pedrayes, Nuria
  • Cameán Bao, Iria
Póster presentado en la XIII Reunión GEC (Grupo Español del Carbón), celebrada en Alicante del 18 al 21 de Octubre de 2015., En la actualidad, la mayor parte de las baterías de ion litio comerciales utilizan ánodos de grafito. Sin embargo, una de las mayores desventajas del electrodo de grafito es que su capacidad de almacenamiento de litio está limitada a un valor teórico de 372 mAh g-1 lo que en consecuencia limita la energía de la batería. El sulfuro de molibdeno (MoS2) es capaz de insertar de forma reversible en su estructura mayor cantidad de litio que los valores teóricos correspondientes al grafito. Sin embargo, los resultados obtenidos mostraron una baja ciclabilidad, probablemente como consecuencia de la deformación de las láminas de MoS2 a causa de la gran cantidad de litio intercalado. En este trabajo se han preparado materiales híbridos basados en nanofibras de carbono (NFC) recubiertas coaxialmente por láminas de MoS2 (NFC/MoS2) y se ha estudiado su comportamiento como ánodos en baterías de ion Litio., Los autores agradecen a los fodos FEDER y al Ministerio de Economía y Competitividad (MINECO) por la financiación recibida (proyectos ENE2011-28318-C03 y ENE2014-52189-C2-1-R. J.L. Pinilla y N. Cuesta agradecen al MINECO por la financiación de su contrato Ramón y Cajal y su beca de doctorado FPI (BES 2012-052711), respectivamente.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Expanded fishbone carbon nanofibers: obtention and characterization

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
Poster presented at the AEM2016, International conference on Advanced Energy Materials, 12th-14th september 2016, University of Surrey, Guildford, England (United Kingdom)., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (projects ENE2011-28318-C03-01 and ENE2014-52189-C2-1-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project (reference: FPI. BES-2012-052268). JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the oxidation degree of few-layer graphene oxide sheets obtained from chemically oxidized multiwall carbon nanotubes

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 3 tables.-- © 2014. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Multiwall carbon nanotubes (MWCNT), generated by catalytic decomposition of methane using a Fe–Mo/MgO catalyst, were subjected to oxidation and exfoliation obtaining aqueous suspensions of few-layer graphene oxides (FLGO). FLGO with different oxidation ratios were obtained using a modified Hummers method by varying the amount of oxidizing agent (KMnO4), followed by ultrasonic exfoliation. The exhaustive characterization of the resulting materials clearly showed surface functional groups evolution during oxidation and structural and morphological changes. Oxidation caused expansion and separation of the graphene layers by oxygenated groups formation and water intercalation. The full opening of the MWCNT resulted in FLGO as carbon nanoribbons and sheets from a KMnO4/MWCNT ratio of 6., This work was funded by FEDER, the Spanish Science and Innovation Ministry (ENE2008-06516-C03-01) and the Spanish Economy and Competitiveness Ministry (ENE2011-28318-C03-01). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene quantum dots from fishbone carbon nanofibers

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Gálvez Buerba, Eva Mª
  • Suelves Laiglesia, Isabel
9 figures, 2 tables.-- Supplementary information available., Graphene oxide quantum dots (GOQD) were obtained from fishbone carbon nanofibers (CNF) using a modified Hummers' method followed by ultrasound assisted exfoliation. Owing to its arrangement in accessible small sp2-carbon domains, CNF is a promising precursor for high yield GOQD obtention. The suspension was subjected to further separation by degressive differential centrifugation obtaining fractions of different sizes and oxidation states. The resulting graphene oxide-based products consisted of a mixture of expanded CNF, few-layer graphene oxide sheets and GOQD, the latter accounting for a yield of 42 wt% with respect to the initial CNF weight. The photoluminescence properties were dependent on the size and the oxidation state of each fractionated graphene oxide-based suspension. GOQD showed an excitation-dependent photoluminescent emission with a maximum at 578 nm (yellow) for an excitation of 455 nm. After hydrothermal reduction, reduced GOQD (rGOQD) exhibited bright violet photoluminescence at 448 nm for 330 nm of excitation due to the removal of hydroxyl and epoxide groups from basal planes of the graphene network. Furthermore, the quantum yield of GOQD and rGOQD were measured and reached values of 5.5 and 7%, respectively., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ni-MoS2 supported on carbon nanofibers as hydrogenation catalysts: Effect of support functionalisation

  • Pinilla Ibarz, José Luis
  • Purón, Holda
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Millan, Marcos
6 figures, 5 tables.-- Supplementary information available.-- © 2014. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Fishbone carbon nanofibers (CNF) were functionalised in acidic media using nitric or nitric/sulfuric mixtures in order to introduce variations in their surface chemistry. The textural properties and surface chemistry of the functionalised CNF were characterized by Transmission Electron Microscopy (TEM), N2 adsorption, X-ray diffraction, temperature programmed desorption and X-ray photoelectron spectroscopy. Functionalised CNF thus prepared were used as catalytic support for NiMo catalysts. Resulting catalysts were composed by CNF coaxially coated by Ni-decorated MoS2 slabs, with different lengths and stacking degrees as a function of the functionalisation treatment, as TEM study revealed. Catalysts were evaluated in the hydrogenation of anthracene, a model compound representing polyaromatic groups present in heavy oil fractions. Catalysts prepared with the support functionalised by the less severe treatment, which led to short and defective MoS2 slabs, showed higher hydrogenation activity. On the other hand, harsher functionalisation treatment led to the formation of long stacked MoS2 slabs, resulting in lower performance towards anthracene hydrogenation., This work was partially funded by the Spanish Economy and Competitiveness Ministry and the FEDER funds for the financial support of the Project ENE2011-28318-C03-01. DT thanks for the award of his PhD under the frame of the aforementioned project. J.L.P. thanks the Spanish MEC for a personal grant (Spanish Scientists Mobility Program, ref. EX2009-0822). H.P. thanks the support of CONACYT Mexico for the award of her PhD grant and CSIC for the funding of the short stay at ICB-CSIC (project I-LINK ref.0439)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unzipping of multi-wall carbon nanotubes with different diameter distributions: Effect on few-layer graphene oxide obtention

  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
9 figures, 5 tables.-- © 2017. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Few-layer graphene oxide (FLGO) was obtained by chemical unzipping of multi-wall carbon nanotubes (MWCNT) of different diameter distributions. MWCNT were synthesized by catalytic decomposition of methane using Fe‐Mo/MgO catalysts. The variation in the Fe/Mo ratio (1, 2 and 5) was very influential in MWCNT diameter distribution and type of MWCNT obtained, including textural, chemical, structural and morphological characteristics. MWCNT diameter distribution and surface defects content had a profound impact on the characteristics of the resulting FLGO. Thus, MWCNT obtained with the catalyst with a Fe/Mo: 5 and presenting a narrow diameter distribution centered at 8.6 ± 3.3 nm led to FLGO maintaining non-oxidized graphite stacking (according to XRD analysis), lower specific surface area and higher thermostability as compared to FLGO obtained from MWCNT showing wider diameter distributions. The presence of more oxygen-containing functionalities and structural defects in large diameter nanotubes promotes the intercalation of species towards the inner layers of the nanotube, resulting in an enhanced MWCNT oxidation and opening into FLGO, what improves both micro- and mesoporosity., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2011-28318-C03-01 and ENE2014-52189-C02-01-R). DT thanks for the award of his PhD under the frame of ENE2011-28318-C03-01 project. JLP thanks MINECO for his Ramon y Cajal research contract (RYC-2013-12494)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrocolloids as binders for graphite anodes of lithium-ion batteries

  • Cuesta Pedrayes, Nuria
  • Ramos, Alberto
  • Cameán Martínez, Ignacio
  • Antuña-Nieto, Cristina
  • García Suárez, Ana Beatriz
A series of seven different hydrocolloids are tested as water-soluble binders for synthetic graphite (SG)-based electrodes of lithium-ion batteries (LIBs) and compared with the standard poly(vinylidene difluoride) (PVDF) binder. The hydrocolloids selected are sodium carboxymethyl cellulose (Na-CMC), sodium alginate (Na-Alg), gum arabic (GA), xanthan gum (XG), guar gam (GG), agar-agar (AA) and carrageenan (CAR), the latter three with no precedents in the literature. They all show thermal and electrochemical stability under the experimental conditions employed. For SG/hydrocolloid electrodes, binder concentrations of 5 wt% are found to be optimal, providing outstanding electrochemical performances for electrodes with Na-Alg Na-CMC, XG and GG in galvanostatic cycling experiments at constant (C/10, with C = 372 mAg<sup>-1</sup>) and variable (from C/10 to 2C) current rates, which are comparable, or even superior to those of SG/PVDF electrodes with higher binder content (8 wt%). In contrast, SG/GA, SG/CAR and SG/AA electrodes show poorer electrochemical performances, most likely owing to the low adhesion capacity of the binder (GA and CAR), or the formation of films covering the SG particles (CAR and AA)., Financial support from the Spanish Ministry of Economy and Competitiveness MINECO (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged. A. Ramos and N. Cuesta, respectively, thank the Spanish Research Council for Scientific Research (CSIC) for a JAE-Doc contract, co-funded by the European Social Fund (ESF), and the Spanish Ministry of Economy and Competitiveness (MINECO) for a pre-doctoral grant (BES-2012-052711)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphitized stacked-cup carbon nanofibers as anode materials for lithium-ion batteries

  • Ramos, Alberto
  • Cameán Martínez, Ignacio
  • Cuesta Pedrayes, Nuria
  • García Suárez, Ana Beatriz
The electrochemical performance as anodes in lithium-ion batteries (LIBs) of graphitized stacked-cup carbon nanofibers (CNFs) with different degree of structural order is investigated by galvanostatic cycling. To this end, two types of commercial CNFs (PR19 and PR24) bearing this microstructure were heat treated in the range of 1800-2800°C. The discharge capacity provided at the end of cycling, the capacity retention along cycling (cyclability) and the cycling efficiency (charge capacity/discharge capacity) of these nanomaterials improve significantly after heat treatment. Specifically, a progressive increase of the discharge capacity with the growth of the crystallites sizes (L<inf>c</inf>, L<inf>a</inf>) and the decrease of the structural defects (I<inf>D</inf>/I<inf>t</inf>) is observed. All heat-treated CNFs exhibit cyclabilities > 80% after 50 cycles and efficiencies > 90%. Particularly outstanding is the performance of PR19-2800 which provides a discharge capacity of 295 mAh g<sup>-1</sup> with capacity retention up to 88%. The CNFs heat treated at 2800°C also show good rate capabilities, keeping reversible capacities > 200 mAh g<sup>-1</sup> at a 2C (744 mA g<sup>-1</sup>) rate, and > 100 mAh g<sup>-1</sup> after prolonged cycling (500 cycles) at a 1C rate, clearly outperforming synthetic graphite having micrometric particle size and much larger development of the crystalline structure., Financial support from the Spanish Ministry of Economy and Competitiveness MINECO (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged. A. Ramos and N. Cuesta, respectively, thank the Spanish Research Council for Scientific Research (CSIC) for a JAE-Doc contract, co-funded by the European Social Fund (ESF), and the Spanish Ministry of Economy and Competitiveness (MINECO) for a pre-doctoral grant (BES-2012-052711)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the inherent metal species on the graphitization of methane-based carbon nanofibers

  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Moliner, Rafael
  • Rouzaud, Jean Noël
Carbon nanofibers (CNFs) containing different proportions of Ni and Si were produced from methane decomposition in a fluidized bed reactor with a nickel-copper based catalyst. They were subjected to heat treatment in the temperature interval 1800-2800 °C for the purpose of studying the influence of the inherent metal species on their ability to graphitize. The participation of Ni and Si species on the graphitization of the methane-based CNFs through the formation of a nickel silicide phase as an intermediate state which further promotes the production of silicon carbide was inferred. Moreover, since silicon carbide was observed by X-ray diffraction after the heat treatment of the CNFs at temperatures ≥2400°C, the formation of graphite at the expense of the carbide decomposition seems to be a plausible mechanism to explain the catalytic graphitization of these CNFs. Because of this effect, carbon materials with crystalline parameters in the range of synthetic graphites which are currently employed in energy applications were prepared in this work. A progressive improvement of the degree of the structural order of the materials prepared with increasing Si/Ni weight ratio in the CNFs was observed. © 2012 Elsevier Ltd. All rights reserved., Financial support from the Spanish Ministry of Science and Innovation MICINN (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged. A.B.G. Thanks the MICINN and the Spanish Council for Scientific Research (CSIC) for a personal Grant (Spanish Scientists Mobility Program, ref. PR2009-0195) to develop the HRTEM work at L’Ecole Normale Superieure. Thanks are also due to the Laboratoire de Réactivité de Surface of Pierre et Marie Curie University in Paris for providing access to the transmission electron microscope., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphitization thermal treatment of carbon nanofibers

  • Ramos, Alberto
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
Carbon nanofibers (CNFs) and carbon nanotubes have revolutionized the world of the nanotechnology due to their excellent mechanical, electrical and thermal properties. CNFs are graphitic fibers made of stacks of graphene layers aligned perpendicular, tilted or parallel to the fiber axis, thus resulting in different microstructures. Post-production treatments can be applied to CNFs to improve their performance in several applications. Among them, the heat treatment at high temperature to achieve the transformation of the CNFs into graphite (graphitization) or graphitized CNFs (graphitization heat treatment) has been studied in detail. This review covers the literature on this topic for the last 20 years, analyzing the structural and textural changes shown by the CNFs during graphitization, and how these changes influence their mechanical and electrical properties. Different techniques, particularly, high-resolution transmission electron microscopy, have allowed to determine the microstructure of these nanofilaments. A survey of the applications of graphitized CNFs is provided, these including additives for polymer reinforcement in composites, anodes in lithium-ion batteries, catalyst supports in fuel cells, hydrogen storage and others such as potential biosensors and catalysts in diverse reactions. In this regard, special emphasis is placed on the advantages (or disadvantages) of using graphitized CNFs instead of as-grown CNFs. © 2013 Elsevier Ltd., Financial support from the Spanish Ministry of Economy and Competitiveness MINECO (under Projects ENE2008-06516 and ENE2011-28318) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anodic rate performance in lithium-ion batteries of graphite materials based on carbonaceous wastes

  • Cameán Martínez, Ignacio
  • Ramos, Alberto
  • Cuesta Pedrayes, Nuria
  • García Suárez, Ana Beatriz
The rate performance as anode in lithium-ion batteries of two graphite materials denoted A/CVP/2700 and B/CIQ5/2600 that were prepared by high temperature heat-treatment of carbonaceous wastes from coal combustion fly ashes is herein investigated using galvanostatic cycling at increasing electric current densities (C/20-2C charge-discharge interval rate) and subsequent electrochemical impedance spectroscopy (EIS). These materials show a remarkable stable capacity along cycling with capacity retention values >90% as well as an excellent efficiency of cycling (discharge/charge capacity ratio close to 100%) in the whole interval of rates studied and a significant resistance to aging. Provided they have a graphite-like structure as evaluated by XRD and Raman spectroscopy, the excellent rate capability appears to be also related to the small size and irregular shape of the particles which, respectively, improve the diffusion of the lithium ions in the electrode bulk and reduce the lithium migration resistances as confirmed by the EIS results. Furthermore, the capacities delivered by A/CVP/2700 and B/CIQ5/2600 materials at any rate were larger than those of the reference graphite with much larger development of the crystalline structure, which is commercialized for anodes of LIBs., Financial support from Spanish MICIIN (ENE2008-06516, ENE2011-28318) is gratefully acknowledged. A. Ramos and N. Cuesta thank, respectively, CSIC for a JAE-Doc contract (ESF co-funded) and Spanish MINECO for a pre-doctoral grant (BES-2012-052711)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bio-oil upgrading in supercritical water using Ni-Co catalysts supported on carbon nanofibres

  • Remón, J.
  • Arauzo, J.
  • García, L.
  • Arcelus-Arrillaga, P.
  • Millan, M.
  • Suelves, I.
  • Pinilla, J. L.
This work addresses the preparation, characterisation and screening of different Ni-Co catalysts supported on carbon nanofibres (CNFs) for use in the upgrading of bio-oil in supercritical water. The aim is to improve the physicochemical properties of bio-oil so that it can be used as a fuel. The CNFs were firstly oxidised in HNO3 and afterwards subjected to a thermal treatment to selectively modify their surface chemistry prior to the incorporation of the metal active phase (Ni-Co). The CNFs and the supported catalysts were thoroughly characterised by several techniques, which allowed a relationship to be established between the catalyst properties and the upgrading results. The use of Ni-Co/CNFs for bio-oil upgrading in supercritical water (SCW) significantly improved the properties of the original feedstock. In addition, the thermal treatment to which the fibres were subjected exerted a significant influence on their catalytic properties. An increase in the severity of the thermal treatment led to a substantial reduction in the oxygen content of the CNFs, mainly due to the removal of the less stable oxygen surface groups, which allowed their surface polarity to decrease. This decrease resulted in less formation of solid products. However, it also reduced the H/C and increased the O/C ratios of the upgraded liquid. Therefore, a compromise between the yield and the properties of the upgraded bio-oil was achieved with a Ni-Co supported on a CNF with a moderate amount of oxygen surface groups.