Pasar al contenido principal

DISEÑO NUMERICO DE DISPOSITIVOS FLOTANTES PARA APROVECHAMIENTO DE ENERGIA DE LAS OLAS: EFICIENCIA Y SUPERVIVENCIA.

ENE2016-75074-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A numerical tool for modelling oscillating wave surge converter with nonlinear mechanical constraints

  • Brito, Moisés
  • Canelas, Ricardo
  • García Feal, Orlando
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Ferreira, Rui M. L
  • Neves, Maria Graça
  • Teixeira, Luís C
Wave surge converter (OWSC) devices. The key novelty of this paper is a numerical simulation tool for OWSCs that does not neglect or significantly compromise mechanical constraints such as hydraulic power take-off (PTO) system, revolute joints and frictional contacts among components. The paper is aimed at presenting the key components of the numerical simulation tool and at validating it with laboratory data featuring an OWSC with mechanical constraints under regular and irregular waves. It is based on the implementation of the multibody solver of Project Chrono under the Smoothed Particle Hydrodynamics (SPH) model of DualSPHysics, where the SPH solver resolves the interaction between wave and flap and the multibody solver resolves the interaction between flap and mechanical constraints. Comparison between numerical results and experimental data show that the numerical simulation tool properly predicts the dynamics of the OWSC. Furthermore, in what concerns hydrodynamics of the near-flap flow, the computed and measured free-surface elevations and phase-averaged flow field show reasonable agreement. Once properly validated, the numerical simulation tool is then applied to study the influence of several mechanical constraints, PTO damping characteristics and flap inertia on the hydrodynamic of the OWSC. The viability of OWSC design solutions based on the developed numerical simulation tool is emphasised, in view of its performance in the test cases to which it was subjected., Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Fundação para a Ciência e a Tecnologia | Ref. PD/BD/705970/2014
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

On the accuracy of DualSPHysics to assess violent collisions with coastal structures

  • González Cao, José
  • Altomare, Corrado
  • Cabrera Crespo, Alejandro Jacobo
  • Domínguez Alonso, José Manuel
  • Gómez Gesteira, Ramon
  • Kisacik, D
The accuracy of DualSPHysics and IHFOAM to reproduce the propagation of a regular wave train and its collision with a vertical sea wall with a hanging horizontal cantilever slab was compared by different metrics (skill index, normalized standard deviation, correlation coefficient and root-mean square error). These metrics were applied to elevation of the free-surface and to the horizontal force exerted on the wall. The numerical results of both models converge to experimental values when increasing the resolution, being the accuracy similar for both models at high spatial resolution, although IHFOAM has a slightly higher performance that DualSPHysics for low and medium resolutions. Overall, the analysis suggests that mesh-less models have attained the level of maturity required to provide results with an accuracy equivalent to mesh-based models., Xunta de Galicia | Ref. ED431C-20177/64, Xunta de Galicia | Ref. ED431F 2016/004, Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Long-crested wave generation and absorption for SPH-based DualSPHysics model

  • Altomare, Corrado
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • González Cao, José
  • Suzuki, Tomohiro
  • Gómez Gesteira, Ramon
  • Troch, Peter
The present work presents a fully comprehensive implementation of wave generation and active wave absorption for second-order long-crested monochromatic and random waves in a WCSPH-based (Weakly Compressible Smoothed Particle Hydrodynamics) model. The open-source code DualSPHysics is used for the scope. The numerical flume resembles a physical wave facility, so that, the moving boundaries mimic the action of a piston-type wavemaker. The second-order wave generation system, capable of generating both monochromatic (regular) and random (irregular) waves, is implemented jointly with passive and active wave absorption. A damping system is defined as solution for passive absorption and is used to prevent wave reflection from fixed boundaries in the numerical flume. The use of active wave absorption allows avoiding spurious reflection from the wavemaker. These implementations are validated with theoretical solutions and experimental results, in terms of water surface elevation, wave orbital velocities, wave forces and capacity for damping the re-reflection inside the fluid domain., Xunta de Galicia | Ref. ED431F 2016/004, Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Ministerio de Economía y Competitividad | Ref. RYC-2013-12617
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficiency and survivability analysis of a point-absorber wave energy converter using DualSPHysics

  • Ropero Giralda, Pablo
  • Cabrera Crespo, Alejandro Jacobo
  • Tagliafierro, Bonaventura
  • Altomare, Corrado
  • Domínguez Alonso, José Manuel
  • Gómez Gesteira, Ramon
  • Viccione, Giacomo
Smoothed Particle Hydrodynamics (SPH) method is used here to simulate a heaving point-absorber with a Power Take-Off system (PTO). The SPH-based code DualSPHysics is first validated with experimental data of regular waves interacting with the point-absorber. Comparison between the numerical and experimental heave displacement and velocity of the device show a good agreement for a given regular wave condition and different configurations of the PTO system. The validated numerical tool is then employed to investigate the efficiency of the proposed system. The efficiency, which is defined here as the ratio between the power absorbed by the point-absorber and its theoretical maximum, is obtained for different wave conditions and several arrangements of the PTO. Finally, the effects of highly energetic sea states on the buoy are examined through alternative configurations of the initial system. A survivability study is performed by computing the horizontal and vertical forces exerted by focused waves on the wave energy converter (WEC). The yield criterion is used to determine that submerging the heaving buoy at a certain depth is the most effective strategy to reduce the loads acting on the WEC and its structure, while keeping the WEC floating at still water level is the worst-case scenario., Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Agencia Estatal de Investigación | Ref. IJCI-2017-32592, Xunta de Galicia | Ref. ED431C 2017/64
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Influence of the drag force on the average absorbed power of heaving wave energy converters using smoothed particle hydrodynamics

  • Quartier, Nicolas
  • Ropero Giralda, Pablo
  • Domínguez Alonso, José Manuel
  • Stratigaki, Vasiliki
  • Troch, Peter
In this paper, we investigated how the added mass, the hydrodynamic damping and the drag coefficient of a Wave Energy Converter (WEC) can be calculated using DualSPHysics. DualSPHysics is a software application that applies the Smoothed Particle Hydrodynamics (SPH) method, a Lagrangian meshless method used in a growing range of applications within the field of Computational Fluid Dynamics (CFD). Furthermore, the effect of the drag force on the WEC’s motion and average absorbed power is analyzed. Particularly under controlled conditions and in the resonance region, the drag force becomes significant and can greatly reduce the average absorbed power of a heaving point absorber. Once the drag coefficient has been determined, it is used in a modified equation of motion in the frequency domain, taking into account the effect of the drag force. Three different methods were compared for the calculation of the average absorbed power: linear potential flow theory, linear potential flow theory modified to take the drag force into account and DualSPHysics. This comparison showed the considerable effect of the drag force in the resonance region. Calculations of the drag coefficient were carried out for three point absorber WECs: one spherical WEC and two cylindrical WECs. Simulations in regular waves were performed for one cylindrical WEC with two different power take-off (PTO) systems: a linear damping and a Coulomb damping PTO system. The Coulomb damping PTO system was added in the numerical coupling between DualSPHysics and Project Chrono. Furthermore, we considered the optimal PTO system damping coefficient taking the effect of the drag force into account., Research Foundation Flanders (FWO) | Ref. 1SC5421N, Research Foundation Flanders (FWO) | Ref. 1267321N, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017- 32592, Fonds voor Wetenschappelijk Onderzoek – Vlaanderen | Ref. 1SC5421N, Fonds voor Wetenschappelijk Onderzoek – Vlaanderen | Ref. 1267321N
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards a more complete tool for coastal engineering: solitary wave generation, propagation and breaking in an SPH-based model

  • Domínguez Alonso, José Manuel
  • Altomare, Corrado
  • González Cao, José
  • Lomonaco, Pedro
The present work describes the implementation of an advanced solitary wave generation system in the mesh-less SPH-based DualSPHysics model to simulate tsunami-like solitary waves. Three different generation theories have been implemented and are extended to generate multiple solitary waves. The numerical model is validated against theoretical solutions and physical model results from three different experimental campaigns, which investigated respectively: i) the forces exerted on harbour protections; ii) the run-up of solitary waves on a gentle beach; and iii) the impact of double solitary waves on two cylindrical reservoirs. The differences of modelling breaking and non-breaking wave conditions are highlighted. The results demonstrate the capability of DualSPHysics to represents the main hydrodynamic properties of solitary waves when interacting with the shoreline or with coastal structures. The applicability of DualSPHysics to coastal engineering problems is enhanced, being the model already capable of generating monochromatic waves and random sea states., National Science Foundation | Ref. CMMI-1519679, Xunta de Galicia | Ref. ED431C 2017/64, Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Fondo Europeo de Desarrollo Regional, Interreg project MarRISK | Ref. 0262_MARRISK_1_E
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessment of hybrid wind-wave energy resource for the NW coast of Iberian Peninsula in a climate change context

  • Ribeiro, Americo
  • Costoya Noguerol, Jorge
  • De Castro Rodriguez, Maria Teresa
  • Carvalho, David
  • Dias, João Miguel
  • Rocha, Alfredo
  • Gómez Gesteira, Ramon
Offshore renewable energy has a high potential for ensuring the successful implementation of the European decarbonization agenda planned for the near future. Hybrid wind-wave farms can reduce installation and maintenance costs, and increase the renewable energy availability of a location by compensating for the wind’s intermittent nature with good wave conditions. In addition, wave farms can provide protection to wind farms, and the combined wind/wave farm can provide coastal protection. This work aims to assess the future hybrid wind-wave energy resource for the northwest coast of Iberian Peninsula for the near future (2026–2045), under the RCP 8.5 greenhouse gas emission scenario. This assessment was accomplished by applying a Delphi classification method to define four categories, aiming to evaluate the richness (wind and wave energy availability, downtime), the variability (temporal variation), the environmental risk (extreme events), and cost parameters (water depth and distance to coast) of the wind and wave resources. The combined index (CI), which classifies the hybrid wind-wave resource, shows that most of the NW Iberian Peninsula presents good conditions (CI > 0.6) for exploiting energy from wind and wave resources simultaneously. Additionally, there are some particularly optimal areas (CI > 0.7), such as the region near Cape Roca, and the Galician coast., Fundação para a Ciência e a Tecnologia | Ref. SFRH/BD/114919/2016, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50017/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

SPH simulation of floating structures with moorings

  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Hall, Matthew
  • Altomare, Corrado
  • Wu, Minghao
  • Stratigaki, Vasiliki
  • Troch, Peter
  • Cappietti, Lorenzo
  • Gómez Gesteira, Ramon
The open-source code DualSPHysics is applied to simulate the interaction of sea waves with floating offshore structures, which are typically moored to the seabed, such as vessels, boats, floating breakwaters and wave energy converters (WECs). The goal is to develop a numerical tool that allows the study of the survivability of floating moored devices under highly energetic sea states, obtaining the optimum mooring layout to increase lifetime. The moorings are modelled by coupling DualSPHysics with MoorDyn, a lumped-mass mooring dynamics model. MoorDyn represents mooring line behaviour subject to axial elasticity, hydrodynamic forces in quiescent water, and vertical contact forces with the seabed. Calculated mooring tensions at the fairlead are added as external forces in order to compute the resulting response and motions of the floating structures in DualSPHysics. The coupled model has been validated against data from scale model tests generated during the experimental campaigns for the European MaRINET2 EsflOWC project. In order to evaluate the accuracy of the coupling implementation with the lumped-mass mooring model, free-surface elevation, motions of the floater and mooring tensions are numerically computed and compared to experimental data. Overall, the results demonstrate the accuracy of the coupling between DualSPHysics and MoorDyn to simulate the motion of a moored floating structure under the action of regular waves. Going forward, this modelling approach can be employed to simulate more complex floating structures such as floating wind turbines, buoys, WECs, offshore platforms, etc., Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

DualSPHysics: from fluid dynamics to multiphysics problems

  • Domínguez Alonso, José Manuel
  • Fourtakas, G.
  • Altomare, C.
  • Canelas, R. B.
  • Tafuni, A.
  • García Feal, Orlando
  • Martinez Estevez, Iván
  • Mokos, A.
  • Vacondio, R.
  • Cabrera Crespo, Alejandro Jacobo
  • Rogers, B. D.
  • Stansby, P. K.
  • Gómez Gesteira, Ramon
DualSPHysics is a weakly compressible smoothed particle hydrodynamics (SPH) Navier–Stokes solver initially conceived to deal with coastal engineering problems, especially those related to wave impact with coastal structures. Since the first release back in 2011, DualSPHysics has shown to be robust and accurate for simulating extreme wave events along with a continuous improvement in efficiency thanks to the exploitation of hardware such as graphics processing units for scientific computing or the coupling with wave propagating models such as SWASH and OceanWave3D. Numerous additional functionalities have also been included in the DualSPHysics package over the last few years which allow the simulation of fluid-driven objects. The use of the discrete element method has allowed the solver to simulate the interaction among different bodies (sliding rocks, for example), which provides a unique tool to analyse debris flows. In addition, the recent coupling with other solvers like Project Chrono or MoorDyn has been a milestone in the development of the solver. Project Chrono allows the simulation of articulated structures with joints, hinges, sliders and springs and MoorDyn allows simulating moored structures. Both functionalities make DualSPHysics especially suited for the simulation of offshore energy harvesting devices. Lately, the present state of maturity of the solver goes beyond single-phase simulations, allowing multi-phase simulations with gas–liquid and a combination of Newtonian and non-Newtonian models expanding further the capabilities and range of applications for the DualSPHysics solver. These advances and functionalities make DualSPHysics an advanced meshless solver with emphasis on free-surface flow modelling., Ministerio de Economía, Industria y Competitividad | Ref. ENE2016-75074-C2-1-R, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592, Xunta de Galicia | Ref. ED431C 2017/64
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Non-linear wave generation and absorption using open boundaries within DualSPHysics

  • Verbrugghe, Tim
  • Domínguez Alonso, José Manuel
  • Altomare, Corrado
  • Tafuni, Angelantonio
  • Vacondio, Renato
  • Troch, Peter
  • Kortenhaus, Andreas
The present work introduces the implementation of wave generation and wave absorption of non-linear, long-crested regular and irregular waves in the WCSPH-based (Weakly Compressible Smoothed Particle Hydrodynamics) DualSPHysics solver. Open boundaries are applied here for both wave generation and absorption. These boundaries consist of buffer zones, on which physical quantities are imposed, or extrapolated from the fluid domain using ghost nodes. Several layers of buffer particles are used to create an inlet and an outlet, where the horizontal component of the orbital velocities, surface elevation and pressure can be imposed from any external source or extrapolated from the fluid domain. This allows the creation of a numerical wave flume with a length of one wavelength. Reflections within the fluid domain are successfully mitigated using a velocity correction term at both inlet and outlet. The implementation is validated with theoretical solutions, in terms of water surface elevation, wave orbital velocities, and dynamic pressure. The model proves to be capable of propagating waves with less than 5% reflection, and RMSE errors on physical quantities lower than 4.3%. The application of open boundaries proves to be an accurate method to generate and absorb non-linear waves within a restricted domain., Xunta de Galicia | Ref. ED481B-2018/020, Xunta de Galicia | Ref. ED431C 2017/64, Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Interreg project MarRISK | Ref. 0262_MARRISK_1_E, Agency for Innovation by Science and Technology in Flanders (IWT/Vlaio), Italian Ministry of Education, University and Research (MUIR) | Ref. RBSI14R1GP
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Evaluating the future efficiency of wave energy converters along the NW coast of the Iberian Peninsula

  • Ribeiro, Américo S.
  • De Castro Rodriguez, Maria Teresa
  • Ruso, Liliana
  • Berrnardino, Mariana
  • Dias, João Miguel
  • Gómez Gesteira, Ramon
The efficiency of wave energy converters (WECs) is generally evaluated in terms of historical wave conditions that do not necessarily represent the conditions that those devices will encounter when put into operation. The main objective of the study is to assess the historical and near future efficiency and energy cost of two WECs (Aqua Buoy and Pelamis). A SWAN model was used to downscale the wave parameters along the NW coast of the Iberian Peninsula both for a historical period (1979–2005) and the near future (2026–2045) under the RCP 8.5 greenhouse scenario. The past and future efficiency of both WECs were computed in terms of two parameters that capture the relationship between sea states and the WEC power matrices: the load factor and the capture width. The wave power resource and the electric power capacity of both the WECs will decrease in the near future. The load factor for Aqua Buoy will decrease in the entire area, while it will remain unchanged for Pelamis in most of the area, except north of 43.5° N. The capture width and cost of energy will increase for both devices. The methodology here applied can be easily applied to any device and coastal domain under different climate change scenarios., WECAnet: A pan-European network for Marine Renewable Energy | Ref. CA17105, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64-GRC, Fundação para a Ciência e a Tecnologia | Ref. PTDC/EAM_OCE/28561/2017
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Local uniform stencil (LUST) boundary condition for arbitrary 3-D boundaries in parallel smoothed particle hydrodynamics (SPH) models

  • Fourtakas, Georgios
  • Domínguez Alonso, José Manuel
  • Vacondio, Renato
  • Rogers, Benedict D
This paper presents the development of a new boundary treatment for free-surface hydrodynamics using the smoothed particle hydrodynamics (SPH) method accelerated with a graphics processing unit (GPU). The new solid boundary formulation uses a local uniform stencil (LUST) of fictitious particles that surround and move with each fluid particle and are only activated when they are located inside a boundary. This addresses the issues currently affecting boundary conditions in SPH, namely the accuracy, robustness and applicability while being amenable to easy parallelization such as on a GPU. In 3-D, the methodology uses triangles to represent the geometry with a ray tracing procedure to identify when the LUST particles are activated. A new correction is proposed to the popular density diffusion term treatment to correct for pressure errors at the boundary. The methodology is applicable to complex arbitrary geometries without the need of special treatments for corners and curvature is presented. The paper presents the results from 2-D and 3-D Poiseuille flows showing convergence rates typical for weakly compressible SPH. Still water in a complex 3-D geometry with a pyramid demonstrates the robustness of the technique with excellent agreement for the pressure distributions. The method is finally applied to the SPHERIC benchmark of a dry-bed dam-break impacting an obstacle showing satisfactory agreement and convergence for a violent flow., EPSRC, Reino Unido | Ref. EP/L014890/1, Ministry of Education, Universities and Research, Italia | Ref. RBSI14R1GP, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Economía y Competividad | Ref. ENE2016-75074-C2-1-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

3-D numerical study of a bottom ramp fish passage using smoothed particle hydrodynamics

  • Novak, Gorazd
  • Domínguez Alonso, José Manuel
  • Tafuni, Angelo
  • Silva, Ana T.
  • Pengal, Polona
  • Četina, Matjaž
  • Žagar, Dušan
Worldwide, the overwhelming number of man-made barriers in fluvial systems has been identified as one of the major causes of the reported staggering average declines of migratory fish. Fish passages have been shown to help mitigate such problems. Close-to-nature types of fish passages, such as bottom ramps, bypass channels, and fish ramps can be used to minimize the impact of artificial steep drops (e.g., weirs) on the migration of aquatic fauna, especially in cases of low-head barriers. This study focuses on the characterization of the flow pattern in a bottom ramp. A 3-D numerical model based on the meshless smoothed particle hydrodynamics (SPH) method was successfully validated and then employed for the simulation of turbulent free-surface flow in a straight channel with complex geometry. The effects of bed roughness, channel slope, and flow rate were quantified in terms of flow depth, velocity fields, and area‒velocity ratios. During the study, several new tools were developed, leading to new functionalities in pre-processing, solver, and post-processing which increase the applicability of DualSPHysics in the field of eco-hydraulics., Javna Agencija za Raziskovalno Dejavnost RS | Ref. P2-0180, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

DualSPHysics: from fluid dynamics to multiphysics problems

  • Domínguez, J. M.
  • García-Feal, Orlando
[Abstract:] DualSPHysics is a weakly compressible smoothed particle hydrodynamics (SPH) Navier–Stokes solver initially conceived to deal with coastal engineering problems, especially those related to wave impact with coastal structures. Since the first release back in 2011, DualSPHysics has shown to be robust and accurate for simulating extreme wave events along with a continuous improvement in efficiency thanks to the exploitation of hardware such as graphics processing units for scientific computing or the coupling with wave propagating models such as SWASH and OceanWave3D. Numerous additional functionalities have also been included in the DualSPHysics package over the last few years which allow the simulation of fluid-driven objects. The use of the discrete element method has allowed the solver to simulate the interaction among different bodies (sliding rocks, for example), which provides a unique tool to analyse debris flows. In addition, the recent coupling with other solvers like Project Chrono or MoorDyn has been a milestone in the development of the solver. Project Chrono allows the simulation of articulated structures with joints, hinges, sliders and springs and MoorDyn allows simulating moored structures. Both functionalities make DualSPHysics especially suited for the simulation of offshore energy harvesting devices. Lately, the present state of maturity of the solver goes beyond single-phase simulations, allowing multi-phase simulations with gas–liquid and a combination of Newtonian and non-Newtonian models expanding further the capabilities and range of applications for the DualSPHysics solver. These advances and functionalities make DualSPHysics an advanced meshless solver with emphasis on free-surface flow modelling., This work was partially financed by the Ministry of Economy and Competitiveness of the Government of Spain under project “WELCOME ENE2016-75074-C2-1-R” and financed by Xunta de Galicia (Spain) under project ED431C 2017/64 ″Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas (Grupos de Referencia Competitiva)" co-funded by European Regional Development Fund (ERDF). We are grateful for funding from the European Union Horizon 2020 programme under the ENERXICO Project, Grant Agreement No. 828947 and the Mexican CONACYT- SENER Hidrocarburos Grant Agreement No. B-S-69926. Dr. J. M. Domínguez acknowledges funding from Spanish government under the program “Juan de la Cierva-incorporación 2017” (IJCI-2017-32592). Dr. C. Altomare acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.: 792370., Xunta de Galicia; ED431C 2017/64, México. CONACYT- SENER Hidrocarburos; B-S-69926
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SPH modelling of extreme loads exerted onto a point absorber WEC

  • Crespo, Alejandro J.C.
  • Ropero, Pablo
  • Domínguez Alonso, José Manuel
  • Gómez-Gesteira, Moncho
  • Altomare, Corrado
  • Tagliafierro, Bonaventura
  • Viccione, Giacomo
The proposed work aims to prove the capability of the DualSPHysics numerical code to deal with the interaction of slamming waves with a Wave Energy Converter (WEC). In particular, the analysed device is a point-absorber that consists of a cylindrical heaving-buoy equipped with an air damper in order to reproduce the effect of the Power Take-Off (PTO) system. Numerical vertical displacement of the cylinder under regular waves is found to be in good agreement with experimental data for different PTO systems. Different scenarios are considered to compute the loads of focused waves acting on the device with its PTO system set on hold. The yield criterion is used to determine that keeping the WEC fixed at still water level is the worst-case scenario and submerging the heaving buoy deep enough is the best-case scenario., This work was partially financed by the Ministry of Economy and Competitiveness of the Government of Spain under project “WELCOME ENE2016-75074-C2-1-R” and financed by Xunta de Galicia (Spain) under project ED431C 2017/64 ″Programa de Con-solidación e Estructuración de Unidades de Investi-gación Competitivas (Grupos de Referencia Com-petitiva)" cofunded by European Regional Development Fund (FEDER). Fruitful discussion was held during the Course 'Mod-eling free surface flows with DualSPHysics' funded by the University of Salerno, Italy under the project N. 300393CIC19VICCIONE. Dr. C. Altomare acknowledges funding from the Eu-ropean Union’s Horizon 2020 research and innova-tion programme under the Marie Sklodowska-Curie grant agreement No.: 792370., Peer Reviewed, Postprint (published version)