Pasar al contenido principal

Computational Fluid Dynamics: development, hardware acceleration and application to real problems

IJCI-2017-32592

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficiency and survivability analysis of a point-absorber wave energy converter using DualSPHysics

  • Ropero Giralda, Pablo
  • Cabrera Crespo, Alejandro Jacobo
  • Tagliafierro, Bonaventura
  • Altomare, Corrado
  • Domínguez Alonso, José Manuel
  • Gómez Gesteira, Ramon
  • Viccione, Giacomo
Smoothed Particle Hydrodynamics (SPH) method is used here to simulate a heaving point-absorber with a Power Take-Off system (PTO). The SPH-based code DualSPHysics is first validated with experimental data of regular waves interacting with the point-absorber. Comparison between the numerical and experimental heave displacement and velocity of the device show a good agreement for a given regular wave condition and different configurations of the PTO system. The validated numerical tool is then employed to investigate the efficiency of the proposed system. The efficiency, which is defined here as the ratio between the power absorbed by the point-absorber and its theoretical maximum, is obtained for different wave conditions and several arrangements of the PTO. Finally, the effects of highly energetic sea states on the buoy are examined through alternative configurations of the initial system. A survivability study is performed by computing the horizontal and vertical forces exerted by focused waves on the wave energy converter (WEC). The yield criterion is used to determine that submerging the heaving buoy at a certain depth is the most effective strategy to reduce the loads acting on the WEC and its structure, while keeping the WEC floating at still water level is the worst-case scenario., Agencia Estatal de Investigación | Ref. ENE2016-75074-C2-1-R, Agencia Estatal de Investigación | Ref. IJCI-2017-32592, Xunta de Galicia | Ref. ED431C 2017/64
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Influence of the drag force on the average absorbed power of heaving wave energy converters using smoothed particle hydrodynamics

  • Quartier, Nicolas
  • Ropero Giralda, Pablo
  • Domínguez Alonso, José Manuel
  • Stratigaki, Vasiliki
  • Troch, Peter
In this paper, we investigated how the added mass, the hydrodynamic damping and the drag coefficient of a Wave Energy Converter (WEC) can be calculated using DualSPHysics. DualSPHysics is a software application that applies the Smoothed Particle Hydrodynamics (SPH) method, a Lagrangian meshless method used in a growing range of applications within the field of Computational Fluid Dynamics (CFD). Furthermore, the effect of the drag force on the WEC’s motion and average absorbed power is analyzed. Particularly under controlled conditions and in the resonance region, the drag force becomes significant and can greatly reduce the average absorbed power of a heaving point absorber. Once the drag coefficient has been determined, it is used in a modified equation of motion in the frequency domain, taking into account the effect of the drag force. Three different methods were compared for the calculation of the average absorbed power: linear potential flow theory, linear potential flow theory modified to take the drag force into account and DualSPHysics. This comparison showed the considerable effect of the drag force in the resonance region. Calculations of the drag coefficient were carried out for three point absorber WECs: one spherical WEC and two cylindrical WECs. Simulations in regular waves were performed for one cylindrical WEC with two different power take-off (PTO) systems: a linear damping and a Coulomb damping PTO system. The Coulomb damping PTO system was added in the numerical coupling between DualSPHysics and Project Chrono. Furthermore, we considered the optimal PTO system damping coefficient taking the effect of the drag force into account., Research Foundation Flanders (FWO) | Ref. 1SC5421N, Research Foundation Flanders (FWO) | Ref. 1267321N, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017- 32592, Fonds voor Wetenschappelijk Onderzoek – Vlaanderen | Ref. 1SC5421N, Fonds voor Wetenschappelijk Onderzoek – Vlaanderen | Ref. 1267321N
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A DEM approach for simulating flexible beam elements with the Project Chrono core module in DualSPHysics

  • Capasso, Salvatore
  • Tagliafierro, Bonaventura
  • Martinez Estevez, Iván
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Viccione, Giacomo
This work presents a novel approach for simulating elastic beam elements in DualSPHysics leveraging functions made available by the coupling with the Project Chrono library. Such numerical frameworks, belonging to the Meshfree Particle Methods family, stand out for several features, like complex multiphase phenomena, moving boundaries, and high deformations which are handled with relative ease and reasonable numerical stability and reliability. Based on a co-rotating rigid element structure and lumped elasticity, a cogent mathematical formulation, relying on the Euler–Bernoulli beam theory for the structural discretization, is presented and applied to simulating two-dimensional flexible beams with the discrete elements method (DEM) formulation. Three test cases are presented to validate the smoothed particle hydrodynamics-based (SPH) structure model in both accuracy and stability, starting from an equilibrium test, to the dynamic response, and closing with a fluid–structure interaction simulation. This work proves that the developed theory can be used within a Lagrangian framework, using the features provided by a DEM solver, overtaking the initial limitations, and hence applying the results of static theories to complex dynamic problems., Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

3-D numerical study of a bottom ramp fish passage using smoothed particle hydrodynamics

  • Novak, Gorazd
  • Domínguez Alonso, José Manuel
  • Tafuni, Angelo
  • Silva, Ana T.
  • Pengal, Polona
  • Četina, Matjaž
  • Žagar, Dušan
Worldwide, the overwhelming number of man-made barriers in fluvial systems has been identified as one of the major causes of the reported staggering average declines of migratory fish. Fish passages have been shown to help mitigate such problems. Close-to-nature types of fish passages, such as bottom ramps, bypass channels, and fish ramps can be used to minimize the impact of artificial steep drops (e.g., weirs) on the migration of aquatic fauna, especially in cases of low-head barriers. This study focuses on the characterization of the flow pattern in a bottom ramp. A 3-D numerical model based on the meshless smoothed particle hydrodynamics (SPH) method was successfully validated and then employed for the simulation of turbulent free-surface flow in a straight channel with complex geometry. The effects of bed roughness, channel slope, and flow rate were quantified in terms of flow depth, velocity fields, and area‒velocity ratios. During the study, several new tools were developed, leading to new functionalities in pre-processing, solver, and post-processing which increase the applicability of DualSPHysics in the field of eco-hydraulics., Javna Agencija za Raziskovalno Dejavnost RS | Ref. P2-0180, Ministerio de Economía y Competitividad | Ref. ENE2016-75074-C2-1-R, Xunta de Galicia | Ref. ED431C 2017/64, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

DualSPHysics: from fluid dynamics to multiphysics problems

  • Domínguez, J. M.
  • García-Feal, Orlando
[Abstract:] DualSPHysics is a weakly compressible smoothed particle hydrodynamics (SPH) Navier–Stokes solver initially conceived to deal with coastal engineering problems, especially those related to wave impact with coastal structures. Since the first release back in 2011, DualSPHysics has shown to be robust and accurate for simulating extreme wave events along with a continuous improvement in efficiency thanks to the exploitation of hardware such as graphics processing units for scientific computing or the coupling with wave propagating models such as SWASH and OceanWave3D. Numerous additional functionalities have also been included in the DualSPHysics package over the last few years which allow the simulation of fluid-driven objects. The use of the discrete element method has allowed the solver to simulate the interaction among different bodies (sliding rocks, for example), which provides a unique tool to analyse debris flows. In addition, the recent coupling with other solvers like Project Chrono or MoorDyn has been a milestone in the development of the solver. Project Chrono allows the simulation of articulated structures with joints, hinges, sliders and springs and MoorDyn allows simulating moored structures. Both functionalities make DualSPHysics especially suited for the simulation of offshore energy harvesting devices. Lately, the present state of maturity of the solver goes beyond single-phase simulations, allowing multi-phase simulations with gas–liquid and a combination of Newtonian and non-Newtonian models expanding further the capabilities and range of applications for the DualSPHysics solver. These advances and functionalities make DualSPHysics an advanced meshless solver with emphasis on free-surface flow modelling., This work was partially financed by the Ministry of Economy and Competitiveness of the Government of Spain under project “WELCOME ENE2016-75074-C2-1-R” and financed by Xunta de Galicia (Spain) under project ED431C 2017/64 ″Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas (Grupos de Referencia Competitiva)" co-funded by European Regional Development Fund (ERDF). We are grateful for funding from the European Union Horizon 2020 programme under the ENERXICO Project, Grant Agreement No. 828947 and the Mexican CONACYT- SENER Hidrocarburos Grant Agreement No. B-S-69926. Dr. J. M. Domínguez acknowledges funding from Spanish government under the program “Juan de la Cierva-incorporación 2017” (IJCI-2017-32592). Dr. C. Altomare acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.: 792370., Xunta de Galicia; ED431C 2017/64, México. CONACYT- SENER Hidrocarburos; B-S-69926