Pasar al contenido principal

SUPERVIVENCIA DE DISPOSITIVOS CAPTADORES DE ENERGIA DE LAS OLAS

PID2020-113245RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Combining offshore wind and solar photovoltaic energy to stabilize energy supply under climate change scenarios: a case study on the western Iberian Peninsula

  • Costoya Noguerol, Jorge
  • Castro Rodríguez, María Teresa de
  • Carvalho, David João da Silva
  • Arguilé Pérez, Beatriz
  • Gómez Gesteira, Moncho
The expansion of marine renewable power is a major alternative for the reduction of greenhouse gases emissions. In Europe, however, the high penetration of offshore wind brings intermittency and power variability into the existing power grid. Offshore solar photovoltaic power is another technological alternative under consideration in the plans for decarbonization. However, future variations in wind, air temperature or solar radiation due to climate change will have a great impact on both renewable energy resources. In this context, this study focusses on the offshore energy assessment off the coast of Western Iberia, a European region encompassing Portugal and the Northwestern part of Spain. Making use of a vast source of data from 35 simulations of a research project called CORDEX, this study investigates the complementarity of offshore wind and solar energy sources with the aim of improving the energy supply stability of this region up to 2040. Although the offshore wind energy resource has proven to be higher than solar photovoltaic resource at annual scale, both renewable resources showed significant spatiotemporal energy variability throughout the western Iberian Peninsula. When both renewable resources are combined, the stability of the energy resource increased considerably throughout the year. The proposed wind and solar combination scheme is assessed by a performance classification method called Delphi, considering stability, resource, risk, and economic factors. The total index classification increases when resource stability is improved by considering hybrid offshore wind-photovoltaic solar energy production, especially along the nearshore water
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A numerical study of a taut-moored point-absorber wave energy converter with a linear power take-off system under extreme wave conditions

  • Tagliafierro, Bonaventura
  • Martinez Estevez, Iván
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Göteman, Malin
  • Engström, Jens
  • Gómez Gesteira, Ramon
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Probably the biggest challenge for wave energy is to ensure survival in harsh offshore conditions, in order to reduce costs for offshore repair operations and downtime, and achieve economic viability. This work presents a reliable numerical tool that can be used to study the dynamics and survivability of wave energy converters in violent wave conditions, possibly cutting down the costs of experimental campaigns. Within the Smoothed Particle Hydrodynamics framework, this research identifies a detailed procedure to model a taut-moored point-absorber wave energy converter together with its inherent power take-off device, which seamlessly exploits its functions of energy harvesting and load bearing. A validation of the DualSPHysics code is provided by contrasting the numerical outcome with a thorough set of data obtained in physical tests with extreme waves, showing that the time-integrated numerical model can capture with good accuracy all the physics involved. The computational fluid dynamics tool is employed to perform a survivability study, modeling high-return period wave conditions for marine structures, and providing guidelines on how to create the numerically best setup to be used for design purposes. A real-like irregular sea state representation, comprising 500 waves, was used to draw insightful indications for the structure optimization to increase the structure’s life expectancy, or conversely, to reduce the initial and operational costs., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Coupling between the DualSPHysics solver and multiphysics libraries: implementation, validation and real engineering applications, Acoplamiento entre DualSPHysics y librerías de multifísica: implementación, validación y aplicaciones reales de ingeniería, Acoplamento entre DualSPHysics e librarías de multifísica: implementación, validación e aplicacións reais de enxeñería

  • Martinez Estevez, Iván
Wave Energy Converters (WECs) are devices designed to harness wave energy from both coast and offshore. These devices include a power take-off (PTO) system to convert the wave energy into electricity. Probably the biggest challenge for wave energy is to ensure the efficiency and survivability of WECs by making the most of the energy potential of waves. For this reason, there is the need of using tools that facilitate the tasks of design and analysis of the behaviour of WECs. Computational Fluid Dynamics (CFD) is a fundamental tool in that allows numerical tests to be carried out without the need to build scale models or real prototypes, thus saving time and money. Numerical models cannot replace physical tests, but they can significantly reduce their number and at the same time provide information that is difficult or impossible to measure in real tests. CFD models can be divided into mesh-based and mesh-free models. Among the mesh-free models, the Smoothed Particle Hydrodynamics (SPH) method is worth mentioning. The SPH method can perform simulations of fluid-structure interactions with high accuracy, where the free surface does not require special treatment and high deformations of the free surface can be solved without the problems that would appear in mesh models. However, one of the main limitations of these models is the high computational cost needed to solve the calculations. DualSPHysics model is a CFD based on the SPH method, oriented to the simulation of free surface fluids and their interaction with fixed and floating structures. It is a reference in the field of coastal engineering. Its main fields of application are: the study of wave energy generating devices, the evaluation and study of floating devices, the design of dykes and coastal protection and the interaction of waves with coastal structures. Normally, the use of a single model is not sufficient to simulate complex real-world problems because different physical processes or mechanisms not solved by CFD are involved. Therefore, coupling DualSPHysics with other models is necessary. MoorDyn+ is a mooring library based on the MoorDyn code. The development of MoorDyn+ arose from the need to couple DualSPHysics with a library that solves the mooring dynamics needed to simulate floating devices that are moored to the seabed. Project Chrono is a model that provides a multi-physics simulation engine. The application areas in which Project Chrono is most frequently used are vehicle dynamics, robotics and machine design. This model is able to simulate a large number of mechanical problems of varying complexity with high accuracy and efficiency, such as: rigid and deformable objects, collision detection, friction support, springs, joints, etc. Despite the existence of the DualSPHysics couplings with Project Chrono and MoorDyn+, there is a need to extend the existing functionalities in order to simulate more complex scenarios, such as reproducing WEC devices, PTO systems, simulation of flexible objects and simulation of mooring lines called tensors. Additionally, these models are computationally very slow by their nature, which means that they need to be accelerated by applying high-performance computing (HPC) techniques. The research work during the thesis period will focus on two main lines: i) the development of SPH computational code ideal for studying wave-floating structure interaction, which allows to evaluate and study the efficiency and survivability of WECs and ii) an optimisation and acceleration of the models to make them more computationally efficient by applying HPC techniques., Los convertidores de energía undimotriz (WECs) son dispositivos diseñados para aprovechar la energía de las olas tanto de la costa como de alta mar. Estos dispositivos incluyen un sistema de toma de fuerza (PTO) para convertir la energía de las olas en electricidad. Probablemente, el mayor desafío para la energía undimotriz es garantizar la eficiencia y la capacidad de supervivencia de los WEC aprovechando al máximo el potencial energético de las olas. Por este motivo, existe la necesidad de utilizar herramientas que faciliten las tareas de diseño y análisis del comportamiento de los WEC. La Dinámica de Fluidos Computacional (CFD) es una herramienta fundamental que permite realizar pruebas numéricas sin necesidad de construir maquetas o prototipos reales, ahorrando así tiempo y dinero. Los modelos numéricos no pueden sustituir a las pruebas físicas, pero pueden reducir significativamente su número y al mismo tiempo proporcionar información difícil o imposible de medir en pruebas reales. Los modelos CFD se pueden dividir en modelos basados en malla y modelos sin malla. Entre los modelos sin malla, cabe destacar el método de Smoothed Particle Hydrodynamics (SPH). El método SPH puede realizar simulaciones de interacciones fluido-estructura con alta precisión, donde la superficie libre no requiere un tratamiento especial y se pueden resolver altas deformaciones de la superficie libre sin los problemas que aparecerían en los modelos de malla. Sin embargo, una de las principales limitaciones de estos modelos es el alto costo computacional necesario para resolver los cálculos. El modelo DualSPHysics es un CFD basado en el método SPH, orientado a la simulación de fluidos con superficie libre y su interacción con estructuras fijas y flotantes. Es un referente en el campo de la ingeniería costera. Sus principales campos de aplicación son: el estudio de dispositivos generadores de energía undimotriz, la evaluación y estudio de dispositivos flotantes, el diseño de diques y protección costera y la interacción de las olas con las estructuras costeras. Normalmente, el uso de un solo modelo no es suficiente para simular problemas complejos del mundo real porque están involucrados diferentes procesos físicos o mecanismos no resueltos por CFD. Por lo tanto, es necesario acoplar a DualSPHysics con otros modelos. MoorDyn+ es una biblioteca de amarres basada en el código MoorDyn. El desarrollo de MoorDyn+ surgió de la necesidad de acoplar DualSPHysics con una librería que resolviera la dinámica de amarre necesaria para simular dispositivos flotantes que se encuentran amarrados al fondo marino. Project Chrono es un modelo que proporciona un motor de simulación multifísica. Las áreas de aplicación en las que Project Chrono se utiliza con mayor frecuencia son la dinámica de vehículos, la robótica y el diseño de máquinas. Este modelo es capaz de simular un gran número de problemas mecánicos de diversa complejidad con alta precisión, tales como: objetos rígidos y deformables, detección de colisiones, soporte de fricción, muelles, juntas, etc. A pesar de la existencia de los acoplamientos de DualSPHysics con Project Chrono y MoorDyn+, existe la necesidad de ampliar las funcionalidades existentes para simular escenarios más complejos, como la reproducción de dispositivos WEC, sistemas PTO, simulación de objetos flexibles y simulación de líneas de amarre llamadas tensores. Estos modelos son computacionalmente muy lentos por su naturaleza, lo que significa que deben acelerarse mediante el uso de técnicas de computación de alto rendimiento (HPC). El trabajo de investigación durante el periodo de tesis se centrará en dos líneas principales: i) el desarrollo de código computacional SPH ideal para estudiar la interacción ola-estructura flotantes, que permita evaluar y estudiar la eficiencia y supervivencia de los WECs y ii) una optimización y aceleración de los modelos para hacerlos más eficientes computacionalmente técnicas de HPC., Os convertedores de enerxía ondimotriz (WECs) son dispositivos deseñados para aproveitar a enerxía das ondas tanto da costa como de alta mar. Estes dispositivos inclúen un sistema de toma de forza (PTO) para converter a enerxía das ondas en electricidade. Probablemente, o maior desafío para a enerxía ondimotriz é garantir a eficiencia e a capacidade de supervivencia dos WEC aproveitando ao máximo o potencial enerxético das ondas. Por este motivo, existe a necesidade de utilizar ferramentas que faciliten as tarefas de deseño e análise do comportamento dos WEC. A Dinámica de Fluídos Computacional (CFD) é unha ferramenta fundamental que permite realizar probas numéricas sen necesidade de construír maquetas ou prototipos reais, aforrando así tempo e diñeiro. Os modelos numéricos non poden substituír ás probas físicas, pero poden reducir significativamente o seu número e ao mesmo tempo proporcionar información difícil ou imposible de medir en probas reais. Os modelos CFD pódense dividir en modelos baseados en malla e modelos sen malla. Entre os modelos sen malla, cabe destacar o método de Smoothed Particle Hydrodynamics (SPH). O método SPH pode realizar simulacións de interaccións fluído-estrutura con alta precisión, onde a superficie libre non require un tratamento especial e pódense resolver altas deformacións da superficie libre sen os problemas que aparecerían nos modelos de malla. Con todo, unha das principais limitacións destes modelos é o alto custo computacional necesario para resolver os cálculos. O modelo DualSPHysics é un CFD baseado no método SPH, orientado á simulación de fluídos con superficie libre e a súa interacción con estruturas fixas e flotantes. É un referente no campo da enxeñería costeira. Os seus principais campos de aplicación son: o estudo de dispositivos xeradores de enerxía ondimotriz, a avaliación e estudo de dispositivos flotantes, o deseño de diques e protección costeira e a interacción das ondas coas estruturas costeiras. Normalmente, o uso dun só modelo non é suficiente para simular problemas complexos do mundo real porque están involucrados diferentes procesos físicos ou mecanismos non resoltos por CFD. Por tanto, é necesario axustar a DualSPHysics con outros modelos. MoorDyn+ é unha biblioteca de amarres baseada no código MoorDyn. O desenvolvemento de MoorDyn+ xurdiu da necesidade de axustar DualSPHysics cunha librería que resolvese a dinámica de amarre necesaria para simular dispositivos flotantes que se atopan amarrados ao fondo mariño. Project Chrono é un modelo que proporciona un motor de simulación multifísica. As áreas de aplicación nas que Project Chrono utilízase con maior frecuencia son a dinámica de vehículos, a robótica e o deseño de máquinas. Este modelo é capaz de simular un gran número de problemas mecánicos de diversa complexidade con alta precisión, tales como: obxectos ríxidos e deformables, detección de colisións, soporte de fricción, peiraos, xuntas etc. A pesar da existencia dos axustes de DualSPHysics con Project Chrono e MoorDyn+, existe a necesidade de ampliar as funcionalidades existentes para simular escenarios máis complexos, como a reprodución de dispositivos WEC, sistemas PTO, simulación de obxectos flexibles e simulación de liñas de amarre chamadas tensores. Estes modelos son computacionalmente moi lentos pola súa natureza, o que significa que deben acelerarse mediante o uso de técnicas de computación de alto rendemento (HPC). O traballo de investigación durante o período de tese centrarase en dúas liñas principais: i) o desenvolvemento de código computacional SPH ideal para estudar a interacción onda-estrutura flotantes, que permita avaliar e estudar a eficiencia e supervivencia dos WECs e ii) unha optimización e aceleración dos modelos para facelos máis eficientes computacionalmente técnicas de HPC., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED481A 2021/337
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

MESH-IN: A MESHed INlet offline coupling method for 3-D extreme hydrodynamic events in DualSPHysics

  • Ruffini, Gioele
  • Domínguez Alonso, José Manuel
  • Briganti, Riccardo
  • Altomare, Corrado
  • Stolle, Jacob
  • Cabrera Crespo, Alejandro Jacobo
  • Ghiassi, Bahman
  • Capasso, Salvatore
  • De Girolamo, Paolo
Extreme hydrodynamic events, such as those driven by tsunamis, have a significant impact on coastal environments. The Smoothed Particle Hydrodynamics computational method gained popularity in modelling these phenomena. However, high resolution is needed in areas of interest, making coupling techniques popular to reduce computational costs. Herein, a new two-step offline coupling method was developed and validated in DualSPHysics. In step 1, the simulated velocity field and water depth are measured over a two-dimensional meshed surface of a generating domain. In step 2, the interpolated flow variables are used as boundary conditions in a receiving domain with equal or higher resolution. The method was validated by using two different laboratory experiments that are representative of tsunami propagation and inundation inland. The results show a reduction of computational time of up to 17.6 times, with decreasing savings for increasing resolution in the receiving domain. The validation tests showed that the developed method allows to simulate flows in the receiving domains at nearly the same accuracy of the generating domain while also decreasing computational time. When including debris transport, improvements in accuracy occur when doubling the resolution of the receiving domain with respect to the generating domain., Agencia Estatal de Investigación | Ref. RYC2020-030197-I, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Evaluating the economic viability of near-future wave energy development along the Galician coast using LCoE analysis for multiple wave energy devices

  • De Castro Rodriguez, Maria Teresa
  • Lavidas, G.
  • Arguile Perez, Beatriz
  • Carracedo, P.
  • Gómez de Castro, Nicolás
  • Costoya Noguerol, Jorge
  • Gómez Gesteira, Ramon
The economic profitability of future wave energy production along the Galician coast is assessed by analyzing the Levelized Cost of Energy (LCoE) under different Capital Expenditure (CapEx) scenarios and two discounts rates (5% and 10%). Wave resources for the near future under the RCP8.5 scenario are downscaled using SWAN, providing up to 75 m spatial resolution in coastal areas. The study’s goal is to enhance the cost-effectiveness by selecting the most suitable wave energy converter (WEC) for each location. Fourteen WECs operating at different depths are considered. This analysis reveals that the Atargis device boasts the lowest LCoE for 64.2% of the coastal area, mainly in deep waters, with an LCoE of 77 €/MWh. In addition, the Oyster and Wave Dragon devices exhibit the lowest LCoE for 12.4% and 15.0% of the coastal area, respectively, excelling in shallow waters and near the coast, with values of 50 €/MWh and 97 €/MWh. These findings demonstrate the profitability of wave energy production along the Galician coast, even when considering a more conservative CapEx of 3 M€/MW, resulting in a cost of 140 €/MWh. This conclusion takes into account the evolving electricity prices in Spain, which reached 0.2068 €/kWh in the second half of 2023, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Agencia Estatal de Investigación | Ref. TED2021-129479A-100, Agencia Estatal de Investigación | Ref. IJC2020-043745-I, European Cooperation in Science & Technology | Ref. COST Action CA17105 WECANet, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Coupling an SPH-based solver with an FEA structural solver to simulate free surface flows interacting with flexible structures

  • Martinez Estevez, Iván
  • Tagliafierro, B.
  • El Rahi, J.
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Troch, P.
  • Gómez Gesteira, Ramon
This work proposes a two-way coupling between a Smoothed Particle Hydrodynamics (SPH) model-based named DualSPHysics and a Finite Element Analysis (FEA) method to solve fluid–structure interaction (FSI). Aiming at having a computationally efficient solution via spatial adjustable resolutions for the two phases, the SPH-FEA coupling herein presented implements the Euler–Bernoulli beam model, based on a simplified model that incorporates axial and flexural deformations, to introduce a solid solver in the DualSPHysics framework. This approach is particularly functional and very precise for slender beam elements undergoing large displacements, and large deformations can also be experienced by the structural elements due to the non-linear FEA implementation via a co-rotational formulation. In this two-way coupling, the structure is discretised in the SPH domain using boundary particles on which the forces exerted by fluid phases are computed. Such forces are passed over to the FEA structural solver that updates the beam shape and, finally, the particle positions are subsequently reshuffled to represent the deformed shape at each time step. The SPH-FEA coupling is validated against four reference cases, which prove the model to be as accurate as other approaches presented in literature., Ministerio de Ciencia e Innovación | Ref. PID2020-113245RB-I00, Ministerio de Ciencia e Innovación | Ref. TED2021-129479A-I00, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

High-fidelity numerical modelling of a two-WEC array with accurate implementation of the PTO system and control strategy using DualSPHysics

  • Quartier, Nicolas
  • Vervaet, Timothy
  • Fernandez, Gael Verao
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Stratigaki, Vasiliki
  • Troch, Peter
In order for Wave Energy Converters (WECs) to become economically viable they will have to be installed closely together in so-called WEC arrays. When WECs are placed closely together they influence each other’s motion, which is challenging to implement in a numerical model. The accurate modelling of WECs in WEC arrays is crucial for their further development into cost-effective renewable energy converters. This paper presents the study of numerical modelling of an array of two heaving WECs (a two-WEC array) placed in close proximity of each other in order to increase their interaction effect. The numerical model uses DualSPHysics, a Smoothed Particle Hydrodynamics (SPH) based software to model wave-WEC interaction, coupled to Project Chrono for the modelling of the Power Take-Off (PTO) system and the friction. First, a series of numerical system identification tests are simulated: a free-decay test of an isolated WEC, radiation tests and an excitation test. During the radiation test one WEC is moved by an external force with a chirp-up noise signal, while the other WEC is kept still. This allows the computation of the impedance matrix, and thereby also the hydrodynamic coefficients of the two-WEC array, which has not been done before in SPH. Results were validated with experimental data from the WECfarm test campaign. Secondly, a series of numerical dynamic tests are simulated of the two-WEC array in regular and irregular waves. In the experimental test campaign a friction force caused by the motor and gearbox was counteracting the WEC’s motion, so a friction compensation (FC) force was added to cancel out this friction. This friction and FC force was numerically modelled by adding a novel implementation in Project Chrono. Furthermore, a novel global control strategy was implemented using Project Chrono, in which the PTO force on each WEC depends on the velocity of both WECs. Overall, good to very good agreement was found in terms of heave and free surface elevation when comparing numerical to experimental results, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessing the complementarity of future hybrid wind and solar photovoltaic energy resources for North America

  • Costoya Noguerol, Jorge
  • De Castro Rodriguez, Maria Teresa
  • Carvalho, David
  • Gómez Gesteira, Ramon
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Renewable energy plays a key role into achieving the international targets for reducing global greenhouse gas emissions. Considering that these forms of energy are dependent on climate conditions and that their variability occurs at different time scales, it is important to analyze the complementarity to ensure a stable power supply to the grid in the context of climate change. A multi-model ensemble of 10 global climate models from the CMIP6 project was used to analyze the complementarity between wind and solar photovoltaic power in North America from 2025 to 2054 under the SSP2-4.5 scenario. This complementarity was evaluated using two indices that account for the similarity between the two resources (Similarity index, Si) and the temporal complementarity (Concurrency index, Ci). The combination of the two resources reduced spatial heterogeneity in terms of annual mean power in North America. The highest values of Si were detected west of California and in the Caribbean Sea, and the lowest were found in Mexico. Regarding Ci, the highest values were detected in ocean areas north of 30°N. Both indices were divided into four categories to assess the most suitable areas for combining wind and solar photovoltaic power. Coastal areas in the Gulf of Mexico and substantial areas in the Caribbean Sea are considered optimal in terms of complementarity. Inland, good complementarity was observed on the US-Canada border (e.g., the Great Lakes) and in northern areas such as Alaska or the Labrador Peninsula. The lowest values of complementarity were detected in Mexico., Ministerio de Ciencia e Innovación | Ref. PRTR-C17.I1, Ministerio de Ciencia e Innovación | Ref. IJC2020-043745-I, Ministerio de Ciencia e Innovación | Ref. PID2020-113245RB-I00, Ministerio de Ciencia e Innovación | Ref. TED2021-129479A-100, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50017/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A DEM approach for simulating flexible beam elements with the Project Chrono core module in DualSPHysics

  • Capasso, Salvatore
  • Tagliafierro, Bonaventura
  • Martinez Estevez, Iván
  • Domínguez Alonso, José Manuel
  • Cabrera Crespo, Alejandro Jacobo
  • Viccione, Giacomo
This work presents a novel approach for simulating elastic beam elements in DualSPHysics leveraging functions made available by the coupling with the Project Chrono library. Such numerical frameworks, belonging to the Meshfree Particle Methods family, stand out for several features, like complex multiphase phenomena, moving boundaries, and high deformations which are handled with relative ease and reasonable numerical stability and reliability. Based on a co-rotating rigid element structure and lumped elasticity, a cogent mathematical formulation, relying on the Euler–Bernoulli beam theory for the structural discretization, is presented and applied to simulating two-dimensional flexible beams with the discrete elements method (DEM) formulation. Three test cases are presented to validate the smoothed particle hydrodynamics-based (SPH) structure model in both accuracy and stability, starting from an equilibrium test, to the dynamic response, and closing with a fluid–structure interaction simulation. This work proves that the developed theory can be used within a Lagrangian framework, using the features provided by a DEM solver, overtaking the initial limitations, and hence applying the results of static theories to complex dynamic problems., Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Ministerio de Ciencia, Innovación y Universidades | Ref. IJCI-2017-32592, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Different approaches to analyze the impact of future climate change on the exploitation of wave energy

  • De Castro Rodriguez, Maria Teresa
  • Rusu, L.
  • Arguile Perez, Beatriz
  • Ribeiro, A.
  • Costoya Noguerol, Jorge
  • Carvalho, D.
  • Gómez Gesteira, Ramon
The increment of the share of renewable energies in the global mix implies that all renewable energies must be exploited. In this sense, it is necessary to make significant research and investment effort in the particular case of wave energy to reach the degree of maturity of other marine energies in the near future. Apart from the inherent factors that hinder the development of wave energy, such as the non-existence of a market-leading type of capturing device, uncertainties about the available future resource also hamper its growth. In this article, a review of the procedures followed in the literature to deal with the future wave energy resources and their subsequent exploitation is described. These procedures include the evaluation of the best future atmospheric models to drive wave models, the different downscaling techniques to evaluate the resource in large regions with high spatial resolution, and the analysis of the variability of the future energy resource and its future exploitability in a certain region taking into account different types of devices. Additionally, the current state of the art of previous studies dealing with future wave energy resources for different locations worldwide is described. Despite the difficulties involved in studying future wave energy resources, the high technological readiness level of the offshore wind industry, the creation of power generation farms with combined technologies, and the growth of marine aquaculture in the coming years could generate synergies that provide the definitive impulse to achieve the necessary technological development., Agencia Estatal de Investigación | Ref. PID2020‐113245RB‐I00, Agencia Estatal de Investigación | Ref. TED2021-129479A-I00, Xunta de Galicia | Ref. ED431C 2021/44, Agencia Estatal de Investigación | Ref. IJC2020-043745-I, Agencia Estatal de Investigación | Ref. PRE2021-097580, European Cooperation in Science and Technology, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Numerical model of constrained wave energy hyperbaric converter under full-scale sea wave conditions

  • Brito, Moisés
  • Bernardo, Francisco
  • Neves, Maria G.
  • Neves, Diogo R. C. B.
  • Cabrera Crespo, Alejandro Jacobo
  • Domínguez Alonso, José Manuel
A 2D numerical investigation of the power absorption of a constrained wave energy hyperbaric converter (WEHC) under full-scale sea wave conditions is presented. A fully non-linear numerical model DualSPHysics, based on the coupling of a smoothed particle hydrodynamics (SPH) fluid solver with a multibody dynamics solver, is used to model the interaction between wave and WEHC sub-systems. The numerical model was first validated against experimental data for a similar device, with a good accordance between PTO position and velocity. The model is then employed to study the hydrodynamics of a constrained WEHC considering several sea states, different hydraulic power take-off (PTO) damping and breakwater geometries. It is observed that the capture width ratio (CWR) is particularly sensitive to variations in the PTO damping, although the CWR absolute maximum is less sensitive considering mild variations applied to the PTO damping. Both wave height and wave period have an important effect on the CWR. The breakwater geometry is also essential for the performance of the WEHC, with a decrease in maximum CWR of about 15% for porous breakwater. These results are necessary to understand the full-scale behaviour of WEHC., Fundação para a Ciência e a Tecnologia | Ref. UIDB/00667/2020, Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Coupling of an SPH-based solver with a multiphysics library

  • Martinez Estevez, Iván
  • Domínguez Alonso, José Manuel
  • Tagliafierro, B.
  • Canelas, R.B.
  • García Feal, Orlando
  • Cabrera Crespo, Alejandro Jacobo
  • Gómez Gesteira, Ramon
A two-way coupling between the Smoothed Particle Hydrodynamics-based (SPH) code with a multiphysics library to solve complex fluid-solid interaction problems is proposed. This work provides full access to the package for the use of this coupling by releasing the source code, completed with guidelines for its compilation and utilization, and self-contained template setups for practical uses of the novel implemented features, is provided here. The presented coupling expands the applicability of two different solvers allowing to simulate fluids, multibody systems, collisions with frictional contacts using either non-smooth contact (NSC) or smooth contact (SMC) methods, all integrated under the same framework. The fluid solver is the open-source code DualSPHysics, highly optimised for simulating free-surface phenomena and structure interactions, uniquely positioned as a general-purpose Computational Fluid Dynamics (CFD) software with a GPU-accelerated solver. Mechanical systems that comprise collision detection and/or multibody dynamics are solved by the multiphysics library Project Chrono, which uses a Discrete Element Method (DEM). Therefore, this SPH-DEM coupling approach can manage interactions between fluid and complex multibody systems with relative constraints, springs, or mechanical joints., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

DualSPHysics modelling to analyse the response of Tetrapods against solitary wave

  • Mitsui, Jun
  • Altomare, Corrado
  • Cabrera Crespo, Alejandro Jacobo
  • Domínguez Alonso, José Manuel
  • Martinez Estevez, Iván
  • Suzuki, Tomohiro
  • Kubota, Shin-ichi
  • Gómez Gesteira, Ramon
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The stability of Tetrapod armour units against solitary waves using Smoothed Particle Hydrodynamics (SPH) method is analysed in this work. To this purpose, the SPH-based DualSPHysics code was coupled with the multiphysics library Project Chrono. Tetrapod units are placed above a submerged mound. DualSPHysics solves the fluid-solid interaction, while Project Chrono solves the Tetrapod-mound interactions based on the contact and material properties of the block surface. The motion of the units during the simulation was compared with the physical model experiments where Tetrapods are made of mortar, and the mound is in PVC. The numerical results expressed as displacements of Tetrapods and damage ratio under different solitary waves are in reasonable agreement with the experiments, proving the capability of the DualSPHysics code to simulate challenging environments under the same numerical framework. The validated tool is then applied to study the stability for different coefficients of friction between mound and Tetrapods aiming at simulating the effects of different materials and surface roughness., Ministerio de Ciencia e Innovación | Ref. PID2020-113245RB-I00, Ministerio de Ciencia e Innovación | Ref. TED2021-129479A-I00, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/ 337
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Numerical validations and investigation of a semi-submersible floating offshore wind turbine platform interacting with ocean waves using an SPH framework

  • Tagliafierro, Bonaventura
  • Karimirad, Madjid
  • Altomare, Corrado
  • Göteman, Malin
  • Martinez Estevez, Iván
  • Capasso, Salvatore
  • Domínguez Alonso, José Manuel
  • Viccione, Giacomo
  • Gómez Gesteira, Ramon
  • Cabrera Crespo, Alejandro Jacobo
In this work, we propose numerical validations of the DeepCwind semi-submersible floating platform configuration for a single horizontal axis wind turbine using data from two experimental testing investigations. A Smoothed Particle Hydrodynamics solver is employed to estimate fluid induced loads, whereas the mooring connections are handled via an external library. The first validation setup is based on the DeepCwind offshore wind semi-submersible concept moored with a system of taut-lines and tested for free-decay surge and heave motion (OC6-Phase Ia). The damping evaluation yields a fair estimation of the heave damping behavior, whereas much more dissipation is experienced for the surge. The second validation features a full hydrodynamic characterization of the frequency-related load patterns induced by three different sea-state representations (mono-, bi-chromatic, and irregular waves) (OC6-Phase Ib). The model accurately matches the hydrodynamic load estimation for the whole spectrum of investigated wave components, perfectly capturing the non-linear behavior shown by the considered wave patterns. This work concludes with a systematic study on the motion response, mooring tension, pressure and vorticity, suggesting that: the wave steepness criterion alone cannot identify the most restrictive load case; waves with spectral characteristics close to the heave resonance period lead to higher tensions in the mooring systems, whereas the maximum fluid-induced loads on the hull are decoupled from displacement peaks, showing an average reduction of 30% with respect to the maxima; very steep waves maximize the likelihood of wave overtopping and slamming loads, resulting in locally induced overpressure on the free-board of up to 100% higher than expected for similar wave heights with milder profiles. The input data for these last tests is released for the sake of reproduction., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Agencia Estatal de Investigación | Ref. TED2021-129479A-I00, Agencia Estatal de Investigación | Ref. PID2020-115030RJ-I00, Agencia Estatal de Investigación | Ref. RYC2020-030197, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Harnessing of different WECs to harvest wave energy along the Galician Coast (NW Spain)

  • Arguile Perez, Beatriz
  • Ribeiro, Américo Soares
  • Costoya Noguerol, Jorge
  • De Castro Rodriguez, Maria Teresa
  • Carracedo, Pablo
  • Dias, João Miguel
  • Rusu, Liliana
  • Gómez Gesteira, Ramón
The wave power resource (WP) was calculated along the Galician coast (NW Spain) over the period 2014–2021 using high spatial resolution hourly data from the SWAN model. In addition, the electrical energy (PE) that can be extracted for a particular wave energy converter (WEC) was analyzed for four different WECs (Oyster, Atargis, Aqua Buoy, and Pelamis). The performance of every WEC was also calculated attending to two parameters: the power load factor (ε) and the normalized capture width with respect to the WEC’s geometry (efficiency). Results show that the WP resource is lower than 10 kWm−1 onshore, but it increases to about 50 kWm−1 offshore. Atargis obtained the highest PE, and it is the most efficient device (ε ~40% and efficiency ~45%). Pelamis showed the lowest performance in offshore areas (ε ~15%, efficiency < 10%). A different type of WEC should be considered for every location along the coast depending on its size, performance parameters, and coexistence with other socio-economic activities and protected environmental areas., Xunta de Galicia | Ref. ED431C 2021/44, Ministerio de Ciencia e Innovación | Ref. PID2020-113245RB-I00, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50017/2020, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0094/2020, Ministerio de Ciencia e Innovación | Ref. IJC2020-043745-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Suitability of wave energy converters in northwestern Spain under the near future winter wave climate

  • Arguile Perez, Beatriz
  • Ribeiro, A.S.
  • Costoya Noguerol, Jorge
  • De Castro Rodriguez, Maria Teresa
  • Gómez Gesteira, Ramon
Marine renewable energies can play a key role by reducing the dependency on fossil fuels and, therefore, mitigating climate change. Among them, it is expected that wave energy will experience rapid growth in the upcoming decades. Thus, it is important to know how wave climate will change and how suitable the wave energy converters (WECs) will be to the new wave conditions. This paper aims to evaluate the capability of four different WECs—a WaveRoller type device (WRTD), Atargis, AquaBuoy and RM5—to extract wave energy on the Northwest coast of Spain (NWCS). The analysis was performed using the high-resolution wave data obtained from the Simulating Waves Nearshore (SWAN) model over the near future winters (2026–2045). The energy output (PE), the power load factor (ε), the normalized capture width (NCw) and the operational time (OT) were analyzed. According to these parameters, among the devices that work for intermediate-deep waters, Atargis would be the best option (PE=1400 ± 56 kW, ε =55.4 ± 2.2%, NCw=35.5 ± 4.1% and OT =84.5 ± 3.3%). The WRTD would also be a good option for shallow nearshore areas with PE=427 ± 248 kW, ε =12.8 ± 7.4%, NCw = 48.9 ± 9.6% and OT = 88.7 ± 18.9%. A combination of Atargis and WRTDs is proposed to make up the future wave energy farms on the NWCS., Xunta de Galicia | Ref. ED431C 2021/44, Ministerio de Ciencia e Innovación | Ref. PID2020-113245RB-I00, Agencia Estatal de Investigación | Ref. TED2021-129479A-100, Ministerio de Ciencia e Innovación | Ref. IJC2020-043745-I, Agencia Estatal de Investigación | Ref. PRE2021-097580, Universidade de Vigo/CISUG
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Coupling of an SPH-based solver with a multiphysics library

  • Martínez-Estévez, I.
  • Domínguez, J. M.
  • Tagliafierro, Bonaventura
  • Canelas, Ricardo Birjukovs
  • García-Feal, Orlando
  • Crespo, A.J.C.
  • Gómez-Gesteira, Moncho
[Abstract:] A two-way coupling between the Smoothed Particle Hydrodynamics-based (SPH) code with a multiphysics library to solve complex fluid-solid interaction problems is proposed. This work provides full access to the package for the use of this coupling by releasing the source code, completed with guidelines for its compilation and utilization, and self-contained template setups for practical uses of the novel implemented features, is provided here. The presented coupling expands the applicability of two different solvers allowing to simulate fluids, multibody systems, collisions with frictional contacts using either non-smooth contact (NSC) or smooth contact (SMC) methods, all integrated under the same framework. The fluid solver is the open-source code DualSPHysics, highly optimised for simulating free-surface phenomena and structure interactions, uniquely positioned as a general-purpose Computational Fluid Dynamics (CFD) software with a GPU-accelerated solver. Mechanical systems that comprise collision detection and/or multibody dynamics are solved by the multiphysics library Project Chrono, which uses a Discrete Element Method (DEM). Therefore, this SPH-DEM coupling approach can manage interactions between fluid and complex multibody systems with relative constraints, springs, or mechanical joints., Funding for open access charge: Universidade de Vigo/CISUG, Spain. This work was supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade. This study forms part of the Marine Science programme (ThinkInAzul) supported by Ministerio de Ciencia e Innovación and Xunta de Galicia with funding from European Union NextGenerationEU ( PRTR-C17.I1 ) and European Maritime and Fisheries Fund. I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa predoutoral da Consellería de Cultura, Educación e Universidades da Xunta de Galicia” ( ED481A-2021/337 ). O. García-Feal was funded by Spanish “Ministerio de Universidades” and European Union – NextGenerationEU through the “Margarita Salas” post-doctoral grant. The authors wish to acknowledge the support provided by the Project Chrono developers: Prof. Dan Negrut and Dr. Radu Serban (University of Wisconsin–Madison, US), and Prof. Alessandro Tasora (University of Parma, Italy). The list of authors of the DualSPHysics code is published on its website ( https://dual.sphysics.org/developers/ ) and the Copyright can be seen in the license file of the code ( https://github.com/DualSPHysics/DualSPHysics/blob/master/LICENSE ). The list of authors of the Project Chrono code is shown on its website ( https://projectchrono.org/about/ ) and its Copyright can be seen in the license file of the code ( https://github.com/projectchrono/chrono/blob/main/LICENSE ). DSPHChronoLib code has been developed by the following authors: I. Martínez-Estévez, J.M. Domínguez, R. Canelas, B. Tagliafierro, O. García-Feal, A.J.C. Crespo and M. Gómez-Gesteira; and its Copyright is available in DualSPHysics-Chrono/src_extra/DSPH-Chrono-Lib/LICENSE. DualSPHysics and DSPHChronoLib are released under the GNU Lesser General Public License (LGPL). Project Chrono is released under BSD-3-Clause License., Xunta de Galicia; ED431C 2021/44, Xunta de Galicia; ED481A-2021/337
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Economic viability of floating wave power farms considering the energy generated in the near future

  • Castro-Santos, Laura
  • Filgueira-Vizoso, Almudena
  • Costoya, Xurxo
  • Arguilé-Pérez, Beatriz
  • Ribeiro, Américo
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: This article aims to analyse the economic viability of floating wave energy farms for the present and the next twenty years. The energy potential of the waves mainly depends on the climate, so the current and near future analysis is crucial to determine the economic viability of wave energy farms in a particular location. Current and near future wave resources were considered to assess the main parameters (Net Present Value (NPV), Internal Rate of Return (IRR) and Levelized Cost of Energy (LCOE)) that allow to know the economic feasibility of wave energy farms. This study takes one step forward in determining the economic evaluation of wave energy farms located in deep waters using their future energy projections. The case of study in this paper is the Atlantic coast of the Iberian Peninsula. Results indicate that the future wave energy reduction principally affects the NPV and LCOE of the wave farm., Xunta de Galicia; ED431C 2021/44, Portugal. Fundação para a Ciência e a Tecnologia; UIDB/50017/2020þUIDP/50017/2020, This research was partially funded by Project PID2019- 105386RAI00 “Design of a tool for the selection of offshore renewable energy locations and technologies: application to Spanish territorial waters (SEARENEW)”, financed by Ministerio de Ciencia e Innovaci´on – Agencia Estatal de Investigaci´on/10.13039/501100011033. This research is part of the Project TED2021-132534B–I00 “Characterization of a software to determine the roadmap of the offshore solar energy in the Spanish shore (SEASUN)”, financed by MCIN/AEI/ 10.13039/501100011033 and by the European Union “NextGenerationEU”/ PRTR. Funding for open access charge: Universidade da Coru˜na/CISUG. The authors would like to acknowledge funding from the Xunta de Galicia under project ED431C 2021/44 (Grupos de Referencia Competitiva) and the Ministry of Science and Innovation of the Government of Spain under the project SURVIWEC PID2020-113245RB-I00. This work was partially supported by Project TED2021-129479A-100 (SAFE project) funded by MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU/PRTR”. Moreover, this study forms part of the Marine Science programme (ThinkInAzul) supported by Ministerio de Ciencia e Innovaci´on and Xunta de Galicia with funding from European Union NextGenerationEU (PRTR-C17. I1) and European Maritime and Fisheries Fund. Thanks are also due to the Portuguese Science Foundation (FCT) FCT/MCTES for the financial support to CESAM (UIDB/50017/ 2020þUIDP/50017/2020), through national funds. Additionally, this study was partially supported under the SMART project funded by the AI Moonshot Challenge 2020, promoted by the Portuguese Space Agency - Portugal Space. The present study is also part of the project “WECAnet: A pan-European network for Marine Renewable Energy” (CA17105), which received funding from the HORIZON2020 Framework Programme by COST (European Cooperation in Science and Technology), a funding agency for research and innovation networks. X. Costoya is supported by Grant IJC2020-043745-I/MCIN/AEI/10.13039/501100011033 by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/ PRTR”. B. Arguil´e-P´erez is supported by Grant PRE2021- 097580 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future". Funding for open access charge: Universidade de Vigo/CISUG.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MESH-IN: a MESHed INlet offline coupling method for 3-D extreme hydrodynamic events in DualSPHysics

  • Ruffini, Gioele
  • Domínguez González, José Manuel
  • Briganti, Riccardo
  • Altomare, Corrado|||0000-0001-8817-0431
  • Stolle, Jacob
  • Cabrera Crespo, Alejandro
  • Ghiassi, Bahman
  • Capasso, Salvatore
  • De Girolamo, Paolo
Extreme hydrodynamic events, such as those driven by tsunamis, have a significant impact on coastal environments. The Smoothed Particle Hydrodynamics computational method gained popularity in modelling these phenomena. However, high resolution is needed in areas of interest, making coupling techniques popular to reduce computational costs. Herein, a new two-step offline coupling method was developed and validated in DualSPHysics. In step 1, the simulated velocity field and water depth are measured over a two-dimensional meshed surface of a generating domain. In step 2, the interpolated flow variables are used as boundary conditions in a receiving domain with equal or higher resolution. The method was validated by using two different laboratory experiments that are representative of tsunami propagation and inundation inland. The results show a reduction of computational time of up to 17.6 times, with decreasing savings for increasing resolution in the receiving domain. The validation tests showed that the developed method allows to simulate flows in the receiving domains at nearly the same accuracy of the generating domain while also decreasing computational time. When including debris transport, improvements in accuracy occur when doubling the resolution of the receiving domain with respect to the generating domain., This research was supported by grants from NVIDIA, United States and utilised NVIDIA RTX A6000 48GB. Dr. Corrado Altomare acknowledges funding from Spanish government and the European Social Found (ESF) under the programme ‘Ramón Cajal 2020’ (RYC2020-030197-I/AEI / 10.13039/501100011033). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. This study forms part of the Marine Science programme (ThinkInAzul) supported by Ministerio de Ciencia e Innovación and Xunta de Galicia with funding from European Union NextGenerationEU (PRTR-C17.I1) and European Maritime and Fisheries Fund ., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

SPH-based modeling of a direct-drive WEC in extreme waves and currents

  • Capasso, Salvatore
  • Shahroozi, Zahra
  • Göteman, Malin
  • Martinez Estevez, Ivan
  • Viccione, Giacomo
  • Tagliafierro, Bonaventura|||0000-0001-9171-3038
In this work, we present a fully Lagrangian framework specifically tailored to host point absorber WECs under violent wave–current excitations. Within the open-source DualSPHysics framework, based on the Weakly Compressible Smoothed Particle Hydrodynamics (WCSPH) method, a multipurpose wave tank is modeled to simulate extreme wave trains developing over uniform currents, by adopting the focusing strategy and high-order solutions. Moreover, a novel power take-off (PTO) model is implemented within the loop to unlock a swift characterization of different energetic proxy models. An Uppsala University WEC model is firstly validated under extreme sea states, and such framework is eventually tasked with the simulation of combined wave–current extreme events. The outcome we document suggests that complex buoy dynamics can develop in wave–current fields, with high sensitivity to the sea state representation: focused waves propagating over equally headed currents tend to maximize the line stretching and to develop extremely nonlinear kinematics. Floater displacement and anchoring tension patterns show no direct correlation with the wave–current layout and PTO configurations. Contrary to established knowledge, strong PTO damping does not always guarantee lower system stress. An all-around numerical strategy, leveraging high-fidelity modeling is presented, owning the necessary flexibility to anticipate both operational and ultimate limit state load combinations, accommodating increasing degrees of nonlinearity., S. Capasso and B. Tagliafierro acknowledge the MODENERLANDS European COST Action (CA20109) for supporting this research with the STSM funding scheme. We acknowledge the CINECA award under the ISCRA initiative, for the availability of high-performance computing resources and support. We are grateful for the computing resources from the Northern Ireland High Performance Computing (NI-HPC) service funded by EPSRC, UK (EP/T022175). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MESH-IN: a MESHed INlet offline coupling method for 3-D extreme hydrodynamic events in DualSPHysics

  • Ruffini, Gioele
  • Domínguez González, José Manuel
  • Briganti, Riccardo
  • Altomare, Corrado
  • Stolle, Jacob
  • Cabrera Crespo, Alejandro
  • Ghiassi, Bahman
  • Capasso, Salvatore
  • De Girolamo, Paolo
Extreme hydrodynamic events, such as those driven by tsunamis, have a significant impact on coastal environments. The Smoothed Particle Hydrodynamics computational method gained popularity in modelling these phenomena. However, high resolution is needed in areas of interest, making coupling techniques popular to reduce computational costs. Herein, a new two-step offline coupling method was developed and validated in DualSPHysics. In step 1, the simulated velocity field and water depth are measured over a two-dimensional meshed surface of a generating domain. In step 2, the interpolated flow variables are used as boundary conditions in a receiving domain with equal or higher resolution. The method was validated by using two different laboratory experiments that are representative of tsunami propagation and inundation inland. The results show a reduction of computational time of up to 17.6 times, with decreasing savings for increasing resolution in the receiving domain. The validation tests showed that the developed method allows to simulate flows in the receiving domains at nearly the same accuracy of the generating domain while also decreasing computational time. When including debris transport, improvements in accuracy occur when doubling the resolution of the receiving domain with respect to the generating domain., This research was supported by grants from NVIDIA, United States and utilised NVIDIA RTX A6000 48GB. Dr. Corrado Altomare acknowledges funding from Spanish government and the European Social Found (ESF) under the programme ‘Ramón Cajal 2020’ (RYC2020-030197-I/AEI / 10.13039/501100011033). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. This study forms part of the Marine Science programme (ThinkInAzul) supported by Ministerio de Ciencia e Innovación and Xunta de Galicia with funding from European Union NextGenerationEU (PRTR-C17.I1) and European Maritime and Fisheries Fund ., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

SPH-based modeling of a direct-drive WEC in extreme waves and currents

  • Capasso, Salvatore
  • Shahroozi, Zahra
  • Göteman, Malin
  • Martinez Estevez, Ivan
  • Viccione, Giacomo
  • Tagliafierro, Bonaventura
In this work, we present a fully Lagrangian framework specifically tailored to host point absorber WECs under violent wave–current excitations. Within the open-source DualSPHysics framework, based on the Weakly Compressible Smoothed Particle Hydrodynamics (WCSPH) method, a multipurpose wave tank is modeled to simulate extreme wave trains developing over uniform currents, by adopting the focusing strategy and high-order solutions. Moreover, a novel power take-off (PTO) model is implemented within the loop to unlock a swift characterization of different energetic proxy models. An Uppsala University WEC model is firstly validated under extreme sea states, and such framework is eventually tasked with the simulation of combined wave–current extreme events. The outcome we document suggests that complex buoy dynamics can develop in wave–current fields, with high sensitivity to the sea state representation: focused waves propagating over equally headed currents tend to maximize the line stretching and to develop extremely nonlinear kinematics. Floater displacement and anchoring tension patterns show no direct correlation with the wave–current layout and PTO configurations. Contrary to established knowledge, strong PTO damping does not always guarantee lower system stress. An all-around numerical strategy, leveraging high-fidelity modeling is presented, owning the necessary flexibility to anticipate both operational and ultimate limit state load combinations, accommodating increasing degrees of nonlinearity., S. Capasso and B. Tagliafierro acknowledge the MODENERLANDS European COST Action (CA20109) for supporting this research with the STSM funding scheme. We acknowledge the CINECA award under the ISCRA initiative, for the availability of high-performance computing resources and support. We are grateful for the computing resources from the Northern Ireland High Performance Computing (NI-HPC) service funded by EPSRC, UK (EP/T022175). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed, Postprint (published version)