Pasar al contenido principal

ADQUIRIR CONOCIMIENTOS SOBRE EL RIESGO DE REBASE PARA LAS ZONAS COSTERAS URBANIZADAS

PID2020-115030RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Numerical validations and investigation of a semi-submersible floating offshore wind turbine platform interacting with ocean waves using an SPH framework

  • Tagliafierro, Bonaventura
  • Karimirad, Madjid
  • Altomare, Corrado
  • Göteman, Malin
  • Martinez Estevez, Iván
  • Capasso, Salvatore
  • Domínguez Alonso, José Manuel
  • Viccione, Giacomo
  • Gómez Gesteira, Ramon
  • Cabrera Crespo, Alejandro Jacobo
In this work, we propose numerical validations of the DeepCwind semi-submersible floating platform configuration for a single horizontal axis wind turbine using data from two experimental testing investigations. A Smoothed Particle Hydrodynamics solver is employed to estimate fluid induced loads, whereas the mooring connections are handled via an external library. The first validation setup is based on the DeepCwind offshore wind semi-submersible concept moored with a system of taut-lines and tested for free-decay surge and heave motion (OC6-Phase Ia). The damping evaluation yields a fair estimation of the heave damping behavior, whereas much more dissipation is experienced for the surge. The second validation features a full hydrodynamic characterization of the frequency-related load patterns induced by three different sea-state representations (mono-, bi-chromatic, and irregular waves) (OC6-Phase Ib). The model accurately matches the hydrodynamic load estimation for the whole spectrum of investigated wave components, perfectly capturing the non-linear behavior shown by the considered wave patterns. This work concludes with a systematic study on the motion response, mooring tension, pressure and vorticity, suggesting that: the wave steepness criterion alone cannot identify the most restrictive load case; waves with spectral characteristics close to the heave resonance period lead to higher tensions in the mooring systems, whereas the maximum fluid-induced loads on the hull are decoupled from displacement peaks, showing an average reduction of 30% with respect to the maxima; very steep waves maximize the likelihood of wave overtopping and slamming loads, resulting in locally induced overpressure on the free-board of up to 100% higher than expected for similar wave heights with milder profiles. The input data for these last tests is released for the sake of reproduction., Agencia Estatal de Investigación | Ref. PID2020-113245RB-I00, Agencia Estatal de Investigación | Ref. TED2021-129479A-I00, Agencia Estatal de Investigación | Ref. PID2020-115030RJ-I00, Agencia Estatal de Investigación | Ref. RYC2020-030197, Xunta de Galicia | Ref. ED431C 2021/44, Xunta de Galicia | Ref. ED481A-2021/337, Universidade de Vigo/CISUG
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of focused wave groups on pier structures: a case study of severe breaking waves at Pont del Petroli during storm Gloria

  • Altomare, Corrado|||0000-0001-8817-0431
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Marzeddu, Andrea|||0000-0001-9515-7323
  • Viñes Recasens, Manuel|||0000-0003-3862-5543
  • Mösso Aranda, César|||0000-0003-2598-1864
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
In January 2020, the footbridge connecting the seaward platform of the Pont del Petroli pier to Badalona beach collapsed due to the severe sea storm named Gloria. Approximately 15 m of the footbridge fell into the sea as a result of prolonged wave action and strong impacts. To understand the complex interaction between waves and structures that led to the pier’s collapse during the storm, a composite modelling approach was developed. The loads on each pier element were initially evaluated using the meshless DualSPHysics code, which employs the Smoothed Particle Hydrodynamics (SPH) method. This evaluation was conducted under severe wave conditions analogous to those experienced during the storm. Numerical models informed the design of an experimental campaign carried out at the Maritime Engineering Laboratory of Universitat Politècnica de Catalunya—BarcelonaTech, using the CIEM large-scale wave flume facility in Barcelona, Spain. Post-storm bathymetric surveys revealed significant alterations in the seabed profile near the affected infrastructure, including sediment deposition and a reduction in water depth from 10 m to 8 m. Consequently, it was anticipated that wave transformation and breaking in the vicinity of the structure would be substantially affected. To explore this phenomenon, various extreme wave impacts were experimentally simulated using focused wave groups. The physical model findings unveiled the forces that the pier endured during the storm Gloria. The results indicate that wave phases influence individual waves, with waves that are biased and asymmetric experiencing higher peaks than those focused on the crest. This insight helps to explain the structural failure of the footbridge during the storm and underscores the importance of considering wave phase impacts in the design and assessment of coastal infrastructure. The combined numerical and experimental approach provides a comprehensive understanding of the forces at play, contributing valuable knowledge to the field of coastal engineering and infrastructure resilience., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The experimental campaign was partially funded by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No: 792370. CA acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme “Ramón y Cajal 2020” (RYC 2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical validations and investigation of a semi-submersible floating offshore wind turbine platform interacting with ocean waves using an SPH framework

  • Tagliafierro, Bonaventura|||0000-0001-9171-3038
  • Karimirad, Madjid
  • Altomare, Corrado|||0000-0001-8817-0431
  • Göteman, Malin
  • Martinez Estevez, Ivan
  • Capasso, Salvatore
  • Domínguez Alonso, José Manuel
  • Viccione, Giacomo
  • Gómez Gesteira, Moncho
  • Cabrera Crespo, Alejandro Jacobo
In this work, we propose numerical validations of the DeepCwind semi-submersible floating platform configuration for a single horizontal axis wind turbine using data from two experimental testing investigations. A Smoothed Particle Hydrodynamics solver is employed to estimate fluid induced loads, whereas the mooring connections are handled via an external library. The first validation setup is based on the DeepCwind offshore wind semi-submersible concept moored with a system of taut-lines and tested for free-decay surge and heave motion (OC6-Phase Ia). The damping evaluation yields a fair estimation of the heave damping behavior, whereas much more dissipation is experienced for the surge. The second validation features a full hydrodynamic characterization of the frequency-related load patterns induced by three different sea-state representations (mono-, bi-chromatic, and irregular waves) (OC6-Phase Ib). The model accurately matches the hydrodynamic load estimation for the whole spectrum of investigated wave components, perfectly capturing the non-linear behavior shown by the considered wave patterns. This work concludes with a systematic study on the motion response, mooring tension, pressure and vorticity, suggesting that: the wave steepness criterion alone cannot identify the most restrictive load case; waves with spectral characteristics close to the heave resonance period lead to higher tensions in the mooring systems, whereas the maximum fluid-induced loads on the hull are decoupled from displacement peaks, showing an average reduction of 30% with respect to the maxima; very steep waves maximize the likelihood of wave overtopping and slamming loads, resulting in locally induced overpressure on the free-board of up to 100% higher than expected for similar wave heights with milder profiles. The input data for these last tests is released for the sake of reproduction., Funding for open access charge: Universidade de Vigo/CISUG. We are grateful for the use of the computing resources from the Northern Ireland High Performance Computing (NI-HPC) service funded by EPSRC, UK (EP/T022175). M. Göteman and B. Tagliafierro acknowledge the support provided by the National Academic Infrastructure for Super-computing in Sweden (NAISS) through the project 2022- 5-649 for the use of the GPU partition Tetralith2 at the National Supercomputer Centre (NSC). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/ 10.13039/501100011033 and by the project ED431C 2021/44 ‘‘Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas’’ financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion, Spain (MCIN/AEI/10.13039/ 501100011033) and by the ‘‘European Union NextGenerationEU/PRTR’’. Funding for open access charge: Universidade de Vigo/CISUGB. Tagliafierro expresses gratitude for the scientific support provided by the Project Chrono team, led by Prof. Dan Negrut (UW-Madison) and Dr. Radu Serban (UW-Madison). B. Tagliafierro gratefully acknowledges financial support for this publication by the Fulbright Schuman Program, which is administered by the Fulbright Commission in Brussels and jointly financed by the U.S. Department of State, and the Directorate-General for Education, Youth, Sport and Culture (DG.EAC) of the European Commission. Its contents are solely the responsibility of the author and do not necessarily represent the official views of the Fulbright Program, the Government of the United States, or the Fulbright Commission in Brussels. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme ’Ramón y Cajal 2020’ (RYC2020- 030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID2020-115030RJ-I00 ‘‘Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas’’ (MCIN/AEI/10.13039/501100011033). I. Martínez-Estévez acknowledges funding from Xunta de Galicia, Spain under ‘‘Programa de axudas á etapa predoutoral da Consellería de Cultura, Educación e Universidades da Xunta de Galicia’’ (ED481A-2021/337)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SPH modelling of the interaction between a solitary wave and moving Tetrapods of a breakwater

  • Mitsui, Jun
  • Altomare, Corrado|||0000-0001-8817-0431
  • Crespo, Alejandro J.C.
  • Domínguez Alonso, José Manuel
  • Kubota, Shin-ichi
  • Gómez Gesteira, Moncho
  • Suzuki, Tomohiro
In 2011, the tsunami in Japan caused big damages in the coastal protection structures where a large number of armour units installed at the breakwaters were scattered. This work presents a numerical tool to simulate the behaviour of concrete armour units under wave action, which will help to design breakwaters that will be long-lasting and effective in protecting the coast. The Smoothed Particle Hydrodynamics (SPH) method is a meshless approach suitable for simulating multi-body and body-fluid interactions. SPH is based on a Lagrangian description of fluid motion in which continuum properties are reformulated in terms of smoothed quantities at discrete locations named "particles". SPH can be conveniently adopted to simulate free-surface flows and for capturing highly nonlinear behaviour of wave-structure interactions or fluid-driven objects. The SPH-based DualSPHysics code is coupled with Project Chrono library, a general-purpose simulation package for multi-body problems with support for large systems. Project Chrono solves the solid-solid interaction in terms of surface contacts. The movement of the Tetrapod units under solitary wave action is compared with physical model experiments carried out in a wave flume facility. The experimental campaign includes Tetrapods arranged in one row above a mound covered with PVC. The exact geometry of the Tetrapods, mass and material properties are defined in the simulations. For the block-block and block-mound interactions, the actual friction coefficient (obtained experimentally) is used by Project Chrono. The damage rate simulated in the numerical model, defined here as the percentage of Tetrapods that were moved and the mean displacements of the units, agree with the experimental results. Using DualSPHysics and Project Chrono, the hydrodynamic behaviour of the Tetrapods units against solitary waves is reproduced numerically, constituting a novel application of DualSPHysics to a real engineering problem.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Composite modelling of the Pont del Petroli pier failure due to extreme sea waves during the winter storm Gloria

  • Altomare, Corrado|||0000-0001-8817-0431
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
  • Domínguez, Jose
  • Tafuni, Angelantonio
  • Cabrera Crespo, Alejandro
On January 20th, 2020, the storm Gloria causedthe collapse of the final part of the walkway that connected the seaward platform of the Pont del Petroli pier to the beach of Badalona (Spain). A stretch of about 15 meters fell into the sea due to strong impacts caused by a long-lasting wave action. A composite-modelling approach is proposed herein to reproduce the specific conditions that led to the failure of the pier. The goal of the work is to reconstruct the specific maximum wave conditionscaused by Gloria and to provide information on the ultimate resistance of the pier structural elements. The meshless SPH-based DualSPHysics code has been employed for a preliminary characterization of the loads exerted on each pier element by extreme wave conditions representative of Gloria. Numerical model results have been employed for the setup of the experimental campaign carried out in the large-scale wave flume facility CIEM at UPC in Barcelona. Bathymetric surveys carried out before and after the storm showed a radical change in the bottom bathymetry at the toe of the damaged area of the structure, with sand accretion and reduction of water depth from 10m to 8m, approximately. This heavy change is expected to affect the wave transformation and breaking right before the structure quite significantly. For experimental and numerical modelling, a wide range of extreme individual wave impacts have been generated by means of focused wave groups. The results from the physical model provide a new insight on the forces experienced by the pier during storm Gloria., This work was supported by the project GLORIA PID2020-115030RJ-I00 financed by MCIN/AEI/ 10.13039/501100011033 "Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas".
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization of overtopping volumes from focused wave groups over smooth dikes with an emerged toe: insights from physical model tests

  • Altomare, Corrado|||0000-0001-8817-0431
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
This research examines the overtopping volumes associated with focused wave groups on smooth dikes with an emerged toe. Focused wave groups are employed to represent the highest waves of random sea states in a compact form, obviating the need to model the entire irregular wave train. This study investigates how overtopping volumes are affected by focus location and phase. A total of 418 experimental tests were gathered and analyzed. Data with overtopping volumes below 600 L per meter (prototype conditions) were excluded in order to focus on extreme overtopping events, resulting in 324 relevant test cases. The experiments used first-order wave generation theory to analyze structural response. Subsequent studies will address the errors induced by this approximation and compare it with second-order wave generation. The experiments simulated extreme wave impacts on an idealized coastal layout, comprising a 1:6.3 foreshore slope and three different dike slopes, including vertical structures, with the initial still water level set below the dike toe. This study employed the NewWave theory to generate focused wave groups, with the objective of extending recent research on wave overtopping under varied conditions. The results, analyzed in both dimensional and non-dimensional forms, indicate that overtopping volumes are significantly influenced by the focus phase. Critical focus locations were identified at a distance of one-third of the deep-water wavelength from the toe., This work was supported by the project, GLORIA PID2020-115030RJ-I00, financed by MCIN/AEI/10.13039/501100011033, “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas”. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Fund (ESF) under the program, “Ramón y Cajal 2020” (RYC2020-030197-I/AEI/10.13039/501100011033)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SPH modelling of the interaction between a solitary wave and moving Tetrapods of a breakwater

  • Mitsui, Jun
  • Altomare, Corrado
  • Crespo, Alejandro J.C.
  • Domínguez Alonso, José Manuel
  • Kubota, Shin-ichi
  • Gómez Gesteira, Moncho
  • Suzuki, Tomohiro
In 2011, the tsunami in Japan caused big damages in the coastal protection structures where a large number of armour units installed at the breakwaters were scattered. This work presents a numerical tool to simulate the behaviour of concrete armour units under wave action, which will help to design breakwaters that will be long-lasting and effective in protecting the coast. The Smoothed Particle Hydrodynamics (SPH) method is a meshless approach suitable for simulating multi-body and body-fluid interactions. SPH is based on a Lagrangian description of fluid motion in which continuum properties are reformulated in terms of smoothed quantities at discrete locations named "particles". SPH can be conveniently adopted to simulate free-surface flows and for capturing highly nonlinear behaviour of wave-structure interactions or fluid-driven objects. The SPH-based DualSPHysics code is coupled with Project Chrono library, a general-purpose simulation package for multi-body problems with support for large systems. Project Chrono solves the solid-solid interaction in terms of surface contacts. The movement of the Tetrapod units under solitary wave action is compared with physical model experiments carried out in a wave flume facility. The experimental campaign includes Tetrapods arranged in one row above a mound covered with PVC. The exact geometry of the Tetrapods, mass and material properties are defined in the simulations. For the block-block and block-mound interactions, the actual friction coefficient (obtained experimentally) is used by Project Chrono. The damage rate simulated in the numerical model, defined here as the percentage of Tetrapods that were moved and the mean displacements of the units, agree with the experimental results. Using DualSPHysics and Project Chrono, the hydrodynamic behaviour of the Tetrapods units against solitary waves is reproduced numerically, constituting a novel application of DualSPHysics to a real engineering problem., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of overtopping volumes from focused wave groups over smooth dikes with an emerged toe: insights from physical model tests

  • Altomare, Corrado
  • Gironella Cobos, Xavier
This research examines the overtopping volumes associated with focused wave groups on smooth dikes with an emerged toe. Focused wave groups are employed to represent the highest waves of random sea states in a compact form, obviating the need to model the entire irregular wave train. This study investigates how overtopping volumes are affected by focus location and phase. A total of 418 experimental tests were gathered and analyzed. Data with overtopping volumes below 600 L per meter (prototype conditions) were excluded in order to focus on extreme overtopping events, resulting in 324 relevant test cases. The experiments used first-order wave generation theory to analyze structural response. Subsequent studies will address the errors induced by this approximation and compare it with second-order wave generation. The experiments simulated extreme wave impacts on an idealized coastal layout, comprising a 1:6.3 foreshore slope and three different dike slopes, including vertical structures, with the initial still water level set below the dike toe. This study employed the NewWave theory to generate focused wave groups, with the objective of extending recent research on wave overtopping under varied conditions. The results, analyzed in both dimensional and non-dimensional forms, indicate that overtopping volumes are significantly influenced by the focus phase. Critical focus locations were identified at a distance of one-third of the deep-water wavelength from the toe., This work was supported by the project, GLORIA PID2020-115030RJ-I00, financed by MCIN/AEI/10.13039/501100011033, “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas”. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Fund (ESF) under the program, “Ramón y Cajal 2020” (RYC2020-030197-I/AEI/10.13039/501100011033)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Composite modelling of the Pont del Petroli pier failure due to extreme sea waves during the winter storm Gloria

  • Altomare, Corrado
  • Gironella Cobos, Xavier
  • Sospedra Iglesias, Joaquim
  • Domínguez, Jose
  • Tafuni, Angelantonio
  • Cabrera Crespo, Alejandro
On January 20th, 2020, the storm Gloria causedthe collapse of the final part of the walkway that connected the seaward platform of the Pont del Petroli pier to the beach of Badalona (Spain). A stretch of about 15 meters fell into the sea due to strong impacts caused by a long-lasting wave action. A composite-modelling approach is proposed herein to reproduce the specific conditions that led to the failure of the pier. The goal of the work is to reconstruct the specific maximum wave conditionscaused by Gloria and to provide information on the ultimate resistance of the pier structural elements. The meshless SPH-based DualSPHysics code has been employed for a preliminary characterization of the loads exerted on each pier element by extreme wave conditions representative of Gloria. Numerical model results have been employed for the setup of the experimental campaign carried out in the large-scale wave flume facility CIEM at UPC in Barcelona. Bathymetric surveys carried out before and after the storm showed a radical change in the bottom bathymetry at the toe of the damaged area of the structure, with sand accretion and reduction of water depth from 10m to 8m, approximately. This heavy change is expected to affect the wave transformation and breaking right before the structure quite significantly. For experimental and numerical modelling, a wide range of extreme individual wave impacts have been generated by means of focused wave groups. The results from the physical model provide a new insight on the forces experienced by the pier during storm Gloria., This work was supported by the project GLORIA PID2020-115030RJ-I00 financed by MCIN/AEI/ 10.13039/501100011033 "Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas"., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical validations and investigation of a semi-submersible floating offshore wind turbine platform interacting with ocean waves using an SPH framework

  • Tagliafierro, Bonaventura
  • Karimirad, Madjid
  • Altomare, Corrado
  • Göteman, Malin
  • Martinez Estevez, Ivan
  • Capasso, Salvatore
  • Domínguez Alonso, José Manuel
  • Viccione, Giacomo
  • Gómez Gesteira, Moncho
  • Cabrera Crespo, Alejandro Jacobo
In this work, we propose numerical validations of the DeepCwind semi-submersible floating platform configuration for a single horizontal axis wind turbine using data from two experimental testing investigations. A Smoothed Particle Hydrodynamics solver is employed to estimate fluid induced loads, whereas the mooring connections are handled via an external library. The first validation setup is based on the DeepCwind offshore wind semi-submersible concept moored with a system of taut-lines and tested for free-decay surge and heave motion (OC6-Phase Ia). The damping evaluation yields a fair estimation of the heave damping behavior, whereas much more dissipation is experienced for the surge. The second validation features a full hydrodynamic characterization of the frequency-related load patterns induced by three different sea-state representations (mono-, bi-chromatic, and irregular waves) (OC6-Phase Ib). The model accurately matches the hydrodynamic load estimation for the whole spectrum of investigated wave components, perfectly capturing the non-linear behavior shown by the considered wave patterns. This work concludes with a systematic study on the motion response, mooring tension, pressure and vorticity, suggesting that: the wave steepness criterion alone cannot identify the most restrictive load case; waves with spectral characteristics close to the heave resonance period lead to higher tensions in the mooring systems, whereas the maximum fluid-induced loads on the hull are decoupled from displacement peaks, showing an average reduction of 30% with respect to the maxima; very steep waves maximize the likelihood of wave overtopping and slamming loads, resulting in locally induced overpressure on the free-board of up to 100% higher than expected for similar wave heights with milder profiles. The input data for these last tests is released for the sake of reproduction., Funding for open access charge: Universidade de Vigo/CISUG. We are grateful for the use of the computing resources from the Northern Ireland High Performance Computing (NI-HPC) service funded by EPSRC, UK (EP/T022175). M. Göteman and B. Tagliafierro acknowledge the support provided by the National Academic Infrastructure for Super-computing in Sweden (NAISS) through the project 2022- 5-649 for the use of the GPU partition Tetralith2 at the National Supercomputer Centre (NSC). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/ 10.13039/501100011033 and by the project ED431C 2021/44 ‘‘Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas’’ financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion, Spain (MCIN/AEI/10.13039/ 501100011033) and by the ‘‘European Union NextGenerationEU/PRTR’’. Funding for open access charge: Universidade de Vigo/CISUGB. Tagliafierro expresses gratitude for the scientific support provided by the Project Chrono team, led by Prof. Dan Negrut (UW-Madison) and Dr. Radu Serban (UW-Madison). B. Tagliafierro gratefully acknowledges financial support for this publication by the Fulbright Schuman Program, which is administered by the Fulbright Commission in Brussels and jointly financed by the U.S. Department of State, and the Directorate-General for Education, Youth, Sport and Culture (DG.EAC) of the European Commission. Its contents are solely the responsibility of the author and do not necessarily represent the official views of the Fulbright Program, the Government of the United States, or the Fulbright Commission in Brussels. Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme ’Ramón y Cajal 2020’ (RYC2020- 030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID2020-115030RJ-I00 ‘‘Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas’’ (MCIN/AEI/10.13039/501100011033). I. Martínez-Estévez acknowledges funding from Xunta de Galicia, Spain under ‘‘Programa de axudas á etapa predoutoral da Consellería de Cultura, Educación e Universidades da Xunta de Galicia’’ (ED481A-2021/337)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of focused wave groups on pier structures: a case study of severe breaking waves at Pont del Petroli during storm Gloria

  • Altomare, Corrado
  • Gironella Cobos, Xavier
  • Marzeddu, Andrea
  • Viñes Recasens, Manuel
  • Mösso Aranda, César
  • Sospedra Iglesias, Joaquim
In January 2020, the footbridge connecting the seaward platform of the Pont del Petroli pier to Badalona beach collapsed due to the severe sea storm named Gloria. Approximately 15 m of the footbridge fell into the sea as a result of prolonged wave action and strong impacts. To understand the complex interaction between waves and structures that led to the pier’s collapse during the storm, a composite modelling approach was developed. The loads on each pier element were initially evaluated using the meshless DualSPHysics code, which employs the Smoothed Particle Hydrodynamics (SPH) method. This evaluation was conducted under severe wave conditions analogous to those experienced during the storm. Numerical models informed the design of an experimental campaign carried out at the Maritime Engineering Laboratory of Universitat Politècnica de Catalunya—BarcelonaTech, using the CIEM large-scale wave flume facility in Barcelona, Spain. Post-storm bathymetric surveys revealed significant alterations in the seabed profile near the affected infrastructure, including sediment deposition and a reduction in water depth from 10 m to 8 m. Consequently, it was anticipated that wave transformation and breaking in the vicinity of the structure would be substantially affected. To explore this phenomenon, various extreme wave impacts were experimentally simulated using focused wave groups. The physical model findings unveiled the forces that the pier endured during the storm Gloria. The results indicate that wave phases influence individual waves, with waves that are biased and asymmetric experiencing higher peaks than those focused on the crest. This insight helps to explain the structural failure of the footbridge during the storm and underscores the importance of considering wave phase impacts in the design and assessment of coastal infrastructure. The combined numerical and experimental approach provides a comprehensive understanding of the forces at play, contributing valuable knowledge to the field of coastal engineering and infrastructure resilience., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. The experimental campaign was partially funded by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No: 792370. CA acknowledges funding from the Spanish government and the European Social Found (ESF) under the programme “Ramón y Cajal 2020” (RYC 2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed, Postprint (published version)