Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Coupling between an SPH-based fluid solver and mooring dynamics for floating offshore devices: DualSPHysics and MoorDynPlus

  • Martinez Estevez, Ivan
  • Tagliafierro, Bonaventura|||0000-0001-9171-3038
  • Domínguez Alonso, José Manuel
  • Marzeddu, Andrea|||0000-0001-9515-7323
  • De Castro Rodríguez, María Teresa
  • Cabrera Crespo, Alejandro Jacobo
This paper presents a two-way coupling methodology between the robust Smoothed Particle Hydrodynamics (SPH)-based fluid solver DualSPHysics and the lumped-mass mooring dynamics solver MoorDynPlus. Such integration enables accurate and efficient simulation of the complex hydrodynamic interactions between floating structures and their mooring systems, and is well suited to address wave–structure interaction, including extreme wave conditions. Details of the mooring solver and the coupling framework formed by DualSPHysics-MoorDynPlus are presented, highlighting the proposed methodology implementation for efficient data exchange between the two solvers. The coupled model is rigorously validated against a comprehensive experimental dataset obtained from a dedicated research campaign conducted as part of the SURVIWEC project, which tested two 1:15 scale model devices – one equipped with taut moorings and the other with catenary moorings – subjected to a variety of wave conditions, including regular and focused wave trains. The presented results demonstrate that the DualSPHysics-MoorDynPlus model can accurately predict the dynamic response of the floating structures, including their motions and the associated mooring line tensions. It effectively captures non-linear hydrodynamic effects, which are crucial for assessing the survivability of offshore structures under extreme wave conditions. This work provides a valuable tool for the design and analysis of offshore renewable energy devices, as well as other marine structures operating in challenging ocean environments., Funding for open access charge: Universidade de Vigo/CISUG, Spain. This work was supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. It was also partially supported by Xunta de Galicia under project ED431C 2021/44 (Grupos de Referencia Competitiva); by the project TED2021-129479 A-100 (SAFE project) funded by MCIN/AEI/ 10.13039/501100011033 of the Government of Spain, and the “European Union NextGenerationEU/PRTR”; by the project CienciasMariñas-MRR C286 (Programa de Ciencias Mariñas BDNS20 654075) funded by the “European Union NextGenerationEU/PRTR C17, i1”; and by INTERREG-POCTEP Program under project CAPTA (Code: 0062_CAPTA_1_E). I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM-POWER). J.M. Domínguez acknowledges funding from the grant CNS2022-136073 funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and the grant RYC2022-038341-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coupling between an SPH-based fluid solver and mooring dynamics for floating offshore devices: DualSPHysics and MoorDynPlus

  • Martinez Estevez, Ivan
  • Tagliafierro, Bonaventura
  • Domínguez Alonso, José Manuel
  • Marzeddu, Andrea
  • De Castro Rodríguez, María Teresa
  • Cabrera Crespo, Alejandro Jacobo
This paper presents a two-way coupling methodology between the robust Smoothed Particle Hydrodynamics (SPH)-based fluid solver DualSPHysics and the lumped-mass mooring dynamics solver MoorDynPlus. Such integration enables accurate and efficient simulation of the complex hydrodynamic interactions between floating structures and their mooring systems, and is well suited to address wave–structure interaction, including extreme wave conditions. Details of the mooring solver and the coupling framework formed by DualSPHysics-MoorDynPlus are presented, highlighting the proposed methodology implementation for efficient data exchange between the two solvers. The coupled model is rigorously validated against a comprehensive experimental dataset obtained from a dedicated research campaign conducted as part of the SURVIWEC project, which tested two 1:15 scale model devices – one equipped with taut moorings and the other with catenary moorings – subjected to a variety of wave conditions, including regular and focused wave trains. The presented results demonstrate that the DualSPHysics-MoorDynPlus model can accurately predict the dynamic response of the floating structures, including their motions and the associated mooring line tensions. It effectively captures non-linear hydrodynamic effects, which are crucial for assessing the survivability of offshore structures under extreme wave conditions. This work provides a valuable tool for the design and analysis of offshore renewable energy devices, as well as other marine structures operating in challenging ocean environments., Funding for open access charge: Universidade de Vigo/CISUG, Spain. This work was supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/501100011033. It was also partially supported by Xunta de Galicia under project ED431C 2021/44 (Grupos de Referencia Competitiva); by the project TED2021-129479 A-100 (SAFE project) funded by MCIN/AEI/ 10.13039/501100011033 of the Government of Spain, and the “European Union NextGenerationEU/PRTR”; by the project CienciasMariñas-MRR C286 (Programa de Ciencias Mariñas BDNS20 654075) funded by the “European Union NextGenerationEU/PRTR C17, i1”; and by INTERREG-POCTEP Program under project CAPTA (Code: 0062_CAPTA_1_E). I. Martínez-Estévez acknowledges funding from Xunta de Galicia under “Programa de axudas á etapa posdoutoral da Consellería de Educación, Ciencia, Universidades e Formación Profesional da Xunta de Galicia” (ED481B-2025/086). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM-POWER). J.M. Domínguez acknowledges funding from the grant CNS2022-136073 funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR” and the grant RYC2022-038341-I funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed, Postprint (published version)