Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado|||0000-0001-8817-0431
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Storm-sequence control of beach evolution and overtopping at vertical promenade defences

  • Altomare, Corrado|||0000-0001-8817-0431
  • Marzeddu, Andrea|||0000-0001-9515-7323
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
Work produced with the support of a 2023 Leonardo Grant for Sci-entific Research and Cultural Creation, BBVA Foundation. The Founda-tion takes no responsibility for the opinions, statements and contents of this project, which are entirely the responsibility of its authors. Dr. C. Altomare acknowledges funding from the Spanish government and the European Social Fund (ESF) under the Ramón y Cajal 2020 programme (RYC2020-030197-I/AEI/10.13039/501100011033)., A mid-scale laboratory campaign was conducted in the CIEM wave flume (UPC-Barcelona, 1:10 scale) to quantify the coupled evolution of a sandy beach and wave overtopping at a vertical promenade with an emerged toe. Two storm sequences were reproduced: a rising cluster in which the deep-water significant wave height Hm0 increased stepwise from 0.47 to 0.57 m (C2_sub), and a constant-peak cluster that maintained m throughout (C3). Surface elevation was measured at 38 cross-shore locations, overtopping volumes were captured in load-cell tanks, and bed profiles were surveyed after every 300-wave segment using a mobile laser-mechanical profiler and LIDAR system. The constant-energy cluster injected 21 % more incident wave energy than the rising sequence, yet both produced similar post-storm profiles: once wave breaking became depth-limited over a rapidly forming sandbar (x ≈ 42-50 m), sea-swell heights and mean periods converged between clusters, whereas infragravity energy remained slightly higher in C3. The findings demonstrate that (i) sandbar growth equalises nearshore wave energy across different storm histories, but (ii) transient toe evolution governs overtopping and sediment overwash. Accurate design of urban seawalls with shallow foreshores therefore demands time-resolved morphodynamic representation rather than reliance on peak-condition parameters alone., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Storm-sequence control of beach evolution and overtopping at vertical promenade defences

  • Altomare, Corrado
  • Marzeddu, Andrea
  • Gironella Cobos, Xavier
Work produced with the support of a 2023 Leonardo Grant for Sci-entific Research and Cultural Creation, BBVA Foundation. The Founda-tion takes no responsibility for the opinions, statements and contents of this project, which are entirely the responsibility of its authors. Dr. C. Altomare acknowledges funding from the Spanish government and the European Social Fund (ESF) under the Ramón y Cajal 2020 programme (RYC2020-030197-I/AEI/10.13039/501100011033)., A mid-scale laboratory campaign was conducted in the CIEM wave flume (UPC-Barcelona, 1:10 scale) to quantify the coupled evolution of a sandy beach and wave overtopping at a vertical promenade with an emerged toe. Two storm sequences were reproduced: a rising cluster in which the deep-water significant wave height Hm0 increased stepwise from 0.47 to 0.57 m (C2_sub), and a constant-peak cluster that maintained m throughout (C3). Surface elevation was measured at 38 cross-shore locations, overtopping volumes were captured in load-cell tanks, and bed profiles were surveyed after every 300-wave segment using a mobile laser-mechanical profiler and LIDAR system. The constant-energy cluster injected 21 % more incident wave energy than the rising sequence, yet both produced similar post-storm profiles: once wave breaking became depth-limited over a rapidly forming sandbar (x ≈ 42-50 m), sea-swell heights and mean periods converged between clusters, whereas infragravity energy remained slightly higher in C3. The findings demonstrate that (i) sandbar growth equalises nearshore wave energy across different storm histories, but (ii) transient toe evolution governs overtopping and sediment overwash. Accurate design of urban seawalls with shallow foreshores therefore demands time-resolved morphodynamic representation rather than reliance on peak-condition parameters alone., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementation of a single-phase SPH pneumatic power take-off model for small- and full-scale OWC devices within DualSPHysics

  • Mina, Beatrice
  • Tagliaferro, Bonaventura
  • Martinez Estevez, Ivan
  • Altomare, Corrado
  • Gómez Gesteira, Moncho
  • Malara, Giovanni
  • Arena, Felice
The authors acknowledge the meaningful comments and suggestions provided by Prof A.J.C. Crespo (University of Vigo, Spain) and Dr J.M. Domínguez (University of Vigo, Spain). This paper and related research have been conducted during and with the support of the Italian national inter-university PhD course in Sustainable Development and Climate Change, Italy (link: www.phd-sdc.it). This work was partially supported by the project SURVIWEC PID2020-113245RB-I00 financed by MCIN/AEI/10.13039/50110 0011033 and by the project ED431C 2021/44 “Programa de Consolidación e Estructuración de Unidades de Investigación Competitivas” financed by Xunta de Galicia, Consellería de Cultura, Educación e Universidade, Spain. Grant TED2021-129479A-I00 funded by Ministerio de Ciencia e Innovacion (MCIN/AEI/10. 13039/501100 011033) and by the “European Union NextGenerationEU/PRTR”. We acknowledge EuroHPC JU for awarding the project ID EHPC-REG-2024R02-084 access to MareNostrum5 ACC hosted by the Barcelona Supercomputing Center (Spain). B. Mina acknowledges fundings from MODENERLANDS COST Action CA20109 “Modular Energy Islands for Sustainability and Resilience” supporting an STSM at the Universitat Politècnica de Catalunya – BarcelonaTech (Spain). B. Tagliafierro acknowledges the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No: 101109440 (IM–POWER). Dr. Corrado Altomare acknowledges funding from the Spanish government and the European Social Found (ESF), Spain under the programme ‘Ramón y Cajal 2020’ (RYC2020-030197-I/AEI/10.13039/501100011033) and within the project GLORIA PID 2020-115030RJ-I00 “Adquirir conocimientos sobre el riesgo de rebase para las zonas costeras urbanizadas” (MCIN/AEI/10.13039/501100011033)., A versatile single-phase implementation to model the pneumatic power take-off (PTO) of fixed and floating oscillating water column (OWC) devices is proposed within the Lagrangian software DualSPHysics. The OWCs’ PTO converts wave energy into electricity, exploiting the compression and decompression of air trapped inside the device chamber. The numerical modeling of such a physical phenomenon is a crucial aspect in guaranteeing accuracy in energy conversion performance estimations, especially at full scale. It is, however, a challenging task in meshless environments like Smoothed Particle Hydrodynamics (SPH), adopted herein. Proper physical representation in single-phase models, or high computational effort in multi-phase approaches, indeed, limit the application of SPH to date. In this work, it is developed a mono-phase SPH model coupled with an analytical chamber model, which adequately describes the air pressure variation inside the chamber without sharpening the computational cost, allowing for inclusion of air compressibility effects. This implementation is validated against experimental results concerning fixed OWCs, and is employed to investigate the behavior of the same devices at full scale, confirming the relevance of air compressibility in the latter case, as assessed by consolidated mesh-based findings. Moreover, both the compressible and incompressible pneumatic formulations of the proposed method are validated against laboratory tests over a heaving OWC, constituting one of the first investigations that takes into account air compressibility when studying a floating OWC device. In addition, hydrodynamics studies are performed and presented to visualize the flow behavior near the devices of interest., Peer Reviewed, Postprint (published version)