Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Practical Study of the Temperature Effect in Soil Moisture Measurements

  • García-Navas, José Luis
  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Precision agriculture is a current tendency whose goal is to increase the crop production while reducing the water and fertilization use. The use of low cost sensors and Wireless Sensor Networks (WSNs) are frequently used to implement complex systems to control the irrigation process in crops. Taking into account the importance of developing these low cost systems, in this paper we present a practical study that compares a commercial soil moisture sensor with the prototype of our inductive soil moisture sensor, which is based on two solenoid coils. Additionally, we measure its performance as a function of the soil temperature to quantify the effect of this parameter in the sensor measurements. The results show that the temperature greatly affects the sensors measurements and, although our sensor could be used to measure the soil moisture as a function of the temperature, the configuration of two solenoids is not the most suitable to perform this kind of measurements, This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte, through the Ayudas para contratación predoctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016). Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Evolution of Sea Water Quality in the Spanish Coast from Satellite Images before and during a Confinement Period

  • Parra-Boronat, Mar
  • Parra, Lorena
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Satellite imaging, a form of remote sensing, can be used to analyse water quality, which must be monitored for proper and sustainable environmental management. This paper studies the effect of a sea traffic reduction in the Alboran Sea (Spain), analysing the changes in water quality before (from February 3rd, 2020) and during (until June 22nd, 2020) a confinement period. This was an unprecedented event in modern times and brought an interesting opportunity to study dynamics when the human impact is reduced. The study of these dynamics and the concentration levels with little human effect is important for environmental conservation purposes. We applied already existing indices using ArcGIS and ACOLITE to determine the following environmental parameters: colored dissolved organic matter (CDOM), suspended particulate matter (SPM), chlorophyll-a (Chl-a), and harmful algal blooms (HABs). Prequarantine concentration levels can reach up to 4 a(CDOM)440 (CDOM), 18 g/m(3) (SPM), and 100 mu g/L (Chl-a). Most prequarantine days presented an increment in either concentration level or distribution from the day before. The effects a sudden human impact has on an ecosystem which experimented reduced human influence for months were shown. On the day before the said impact (June 12th), three of the parameters were barely detected with concentration levels of mostly 2 a(CDOM)440 (CDOM), 6 g/m(3) (SPM), and 25 mu g/L (Chl-a), and sparse distribution. Afterwards (June 22nd), their levels went up to 4 a(CDOM)440 (CDOM), 14 g/m(3) (SPM), and 1000 mu g/L (Chl-a) and were distributed near the ports. The results presented in this study show that the main drivers of change when human impact was reduced were climatologic events (such as storms). Nevertheless, the importance of the human facto can be seen through the CDOM, SPM, and Chl-a plume near port areas observed the day after port activity was reactivated, June 22nd., This research was funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR; by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04; and by Universitat Politecnica de Valencia through Program PAID-01-20 and PAID-10-20.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

The Usefulness of Drone Imagery and Remote Sensing Methods for Monitoring Turfgrass Irrigation

  • Mauri, Pedro Vicente
  • Yousfi, Salima
  • Parra, Lorena
  • Marín, José Fernando
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Irrigation is an essential input for grasslands sustainability, especially in seasons where rainfall is not regular and insufficient. The scarcity of water in many regions of the world decreases the timing and quantity of irrigation and affects the quality of grasslands. The use of remote sensing techniques as precise methods to control the efficiency and the management of irrigation contribute to the more sustainability of grasslands. Vegetation indices and Canopy Temperature (CT) are the most common remote sensing approaches used for correct irrigation scheduling. In this study, we evaluated the Green Area (GA) vegetation index calculated from Red, Green, and Blue (RGB) drone images and the plant water status obtained through the CT measured by an infrared thermometer and drone thermal imagery of turfgrass species growing under different water regimes (limited and high irrigation). Experimental plots Soil Moisture (SM) was controlled by soil sensors humidity. Both RGB and thermal images taken by a drone showed heterogeneity in turfgrass growth, with dries zones and absence of vegetation observed under limited irrigation. Under reduced irrigation conditions, lower SM and GA and higher CT were observed. Whereas, under the high irrigation values of SM and GA increased, while CT decreased. The SM data correlated highly with both vegetation index and CT. This study highlights the usefulness of drones and sensors to evaluate turfgrass growth and irrigation efficiency., This research was funded by AREA VERDE-MG projects, by project PDR18-XEROCESPED, funded under the PDR-CM 2014 2020 by the EU (European Agricultural Fund for Rural Development, EAFRD), Spanish Ministry of Agriculture, Fisheries and Food (MAPA) and Comunidad de Madrid regional government through IMIDRA, by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04. The authors want to thank Juan García Barbero, garden manager of RAIN BIRD, manufacturer and provider of irrigation products and services, for his support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using HTML5 for M-Learning Environments

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Túnez-Murcia, Ana Isabel
  • García, Laura
[EN] Currently, there are several remote learning platforms based on video streaming. In most situations, these multimedia resources are displayed using smartphones that can be wirelessly connected to networks with deficient capabilities. In this scenario, the levels of Quality of Service (QoS) and Quality of Experience (QoE) perceived by users can be very low. Therefore, with the aim of finding the most efficient combination of Web browsers, codecs and containers, this paper presents a study to analyze how the encoding used in videos can affect the network performance in terms of data transfer rate, transmission delays, transmission errors and throughput. The tests are performed using mobile devices with Android as the operating system. Different Web browsers, containers and codecs supported by HyperText Markup Language V.5 (HTML5) are also included in this study. The browsers used in this study are Google Chrome, Firefox and Opera while the containers considered to carry out our tests are MP4 and WebM. Results show that MP4 could be a good option to transmit high resolution videos while WebM would be the best option for low quality videos., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the ¿Ministerio de Economia, Industria y Competitividad¿, through the ¿Convocatoria 2016 - Proyectos I+D+I - Programa Estatal De Investigación, Desarrollo e Innovación Orientada a los retos de la sociedad¿ (Project TEC2016- 76795-C6-4-R), through the ¿Convocatoria 2017 - Proyectos I+D+I - Programa Estatal de Investigación, Desarrollo e Innovación, convocatoria excelencia¿ (Project TIN2017- 84802-C2-1-P) and by the ¿Ministerio de Ciencia, Innovación y Universidades¿ through the ¿Ayudas para la adquisición de equipamiento científico-técnico, Subprograma estatal de infraestructuras de investigación y equipamiento científico-técnico (plan Estatal I+D+i 2017- 2020)¿ (project EQC2018-004988-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An intelligent monitoring of greenhouse using wireless sensor networks

  • Touhami, Achouak
  • Benahmed, Khelifa
  • Parra, Lorena
  • Bounaama, Fateh
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Over recent years, the interest for vegetables and fruits in all seasons and places has much increased, from where diverse countries have directed to the commercial production in greenhouse. In this article, we propose an algorithm based on wireless sensor network technologies that monitor the microclimate inside a greenhouse and linear equations model for optimization plant production and material cost. Moreover, we also suggest a novel design of an intelligent greenhouse. We validate our algorithms with simulations on a benchmark based on experimental data made at lNRA of Montfavet in France. Finally, we calculate the statistical estimators RMSE, TSSE, MAPE, EF and R-2. The results obtained are promising, which shows the efficiency of our proposed system, We would like to give special thanks to our colleagues Pr. Draoui Belkacem and Dr. Bourouis Amina from Tahri Mohamed University -Bechar, Algeria, for their helps and advices. Also, we would like to thank the team of ENERAGARID laboratory from Tahri Mohamed University -Bechar, Algeria. Last but not least, we would like to thank the anonymous reviewers for their valuable suggestions to improve the content and quality of our paper. This work has been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR and by the Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Low Cost Sensor for Detecting Illicit Discharge in Sewerage

  • Rocher, Javier
  • Parra-Boronat, Mar
  • Parra, Lorena
  • Lloret, Jaime
  • Mengual Cuquerella, Jesús
  • Sendra, Sandra|||0000-0001-9556-9088
[EN] The presence of illicit discharges in sewerage systems generates an important impact in wastewater treatment plants and the ecosystem. In this paper, we present two prototypes for monitoring the presence of solids in wastewater and to study the effect of the water height. The prototypes are based on color and infrared LEDs and two photosensors located in the prototypes at 0 degrees and 180 degrees degrees. When the photosensor is located at 180 degrees, all color LEDs present a good range of output voltage (approximately 5 V to 0 V) and good R-2. However, for the typical concentration of solids in wastewater, the prototypes do not work correctly. When the photosensor is located in the prototypes the LEDs, yellow, red, and white have a good operation with voltage differences of 1.73 V, 1.76 V, and 1.13 V in P1 and 1.58 V, 1.84 V, and 1.35 V in P2, respectively. We calculate the mathematical model with the heights and solid concentration. The mathematical models which do not consider height present good R-2. In conclusion, when the photosensor is located in the prototype, the height does not have an important effect and can detect the illicit discharge of solids. When the photosensor is located at 180 degrees, it can be used for water with important changes in solid concentrations., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, the "Ministerio de Educacion, Cultura y Deporte", through the "Ayudas para contratacion predoctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)" grant number FPU16/05540, and the Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Calibration of Moisture Sensor Based on Electromagnetic Field Measurement for Irrigation Monitoring

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Marín, José F.
  • Mauri, Pedro V.
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Soil moisture control is crucial to assess irrigation efficiency in green areas and agriculture. In this paper, we propose the design and calibration of a sensor based on inductive coils and electromagnetic fields. The proposed prototypes should meet a series of requirements such as low power consumption, low relative error, and a high voltage difference between the minimum and maximum moisture. We tested different prototypes based on two copper coils divided into two different sets (P1-P15 and NP1-NP4). The prototypes have different characteristics: variations in the number and distribution of spires, existence or absence of casing, and copper wires with a diameter of 0.4 or 0.6 mm. In the first set of experiments carried out in commercial soil, the results showed that the best prototypes were P5, P8, and P9. These prototypes were used in different types of soils, and P8 was selected for the subsequent tests. We carried the second set of experiments using soil from an agricultural field. Based on the data gathered, mathematical models for the calibration of prototypes were obtained and verified. In some cases, two equations were used for different moisture intervals in a single prototype. According to the verification results, NP2 is the best prototype for monitoring the moisture in agricultural lands. It presented a difference in induced voltage of 1.8 V, at 500 kHz, between wet and dry soil with a maximum voltage of 5.12 V. The verification of the calibration determined that the calibration using two mathematical models offers better results, with an average absolute error of 2.1% of moisture., This work is funded by the European Union under ERANETMED (Euro-Mediterranean Cooperation through ERANET joint activities and beyond), project ERANETMED3-227 SMARTWATIR and the European Union, MAPA and Comunidad de Madrid (through IMIDRA), under the project PDR18-XEROCESPED of the PDR-CM 2014-2020 (operative programme of the European Agriculture Fund for Rural Development, EAFRD). L.P. is funded by Conselleria de Educacion, Cultura y Deporte, programme Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant APOSTD/2019/04; J.R. by the Ministerio de Educacion, Cultura y Deporte, through the "Ayudas para contratacion pre-doctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)" grant number FPU16/05540; and M.P. by the Universitat Politecnica de Valencia through the pre-doctoral PAID-01-20 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Cost System Based on Optical Sensor to Monitor Discharge of Industrial Oil in Irrigation Ditches

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Uncontrolled dumping linked to agricultural vehicles causes an increase in the incorporation of oils into the irrigation system. In this paper, we propose a system based on an optical sensor to monitor oil concentration in the irrigation ditches. Our prototype is based on the absorption and dispersion of light. As a light source, we use Light Emitting Diodes (LEDs) with different colours (white, yellow, blue, green, and red) and a photodetector as a sensing element. To test the sensor's performance, we incorporate industrial oils used by a diesel or gasoline engine, with a concentration from 0 to 0.20 mL(oil)/cm(2). The experiment was carried out at different water column heights, 0 to 20 cm. According to our results, the sensor can differentiate between the presence or absence of diesel engine oil with any LED. For gasoline engine oil, the sensor quantifies its concentration using the red light source; concentrations greater than 0.1 mL(oil)/cm(2) cannot be distinguished. The data gathered using the red LED has an average absolute error of 0.003 mL(oil)/cm(2) (relative error of 15.8%) for the worst case, 15 cm. Finally, the blue LED generates different signals in the photodetector according to the type of oil. We developed an algorithm that combines (i) the white LED, to monitor the presence of oil; (ii) the blue LED, to identify if the oil comes from a gasoline or diesel engine; and (iii) the red LED, to monitor the concentration of oil used by a gasoline engine., This work is partially funded by the "Ayudas para contratacion pre-doctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)" grant number FPU16/05540. Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, by the European Union, through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimized Cluster-Based Dynamic Energy-Aware Routing Protocol for Wireless Sensor Networks in Agriculture Precision

  • Qureshi, Kashif Naseer
  • Bashir, Muhammad Umair
  • Lloret, Jaime|||0000-0002-0862-0533
  • León Fernández, Antonio|||0000-0002-9374-9277
[EN] Wireless sensor networks (WSNs) are becoming one of the demanding platforms, where sensor nodes are sensing and monitoring the physical or environmental conditions and transmit the data to the base station via multihop routing. Agriculture sector also adopted these networks to promote innovations for environmental friendly farming methods, lower the management cost, and achieve scientific cultivation. Due to limited capabilities, the sensor nodes have suffered with energy issues and complex routing processes and lead to data transmission failure and delay in the sensor-based agriculture fields. Due to these limitations, the sensor nodes near the base station are always relaying on it and cause extra burden on base station or going into useless state. To address these issues, this study proposes a Gateway Clustering Energy-Efficient Centroid- (GCEEC-) based routing protocol where cluster head is selected from the centroid position and gateway nodes are selected from each cluster. Gateway node reduces the data load from cluster head nodes and forwards the data towards the base station. Simulation has performed to evaluate the proposed protocol with state-of-the-art protocols. The experimental results indicated the better performance of proposed protocol and provide more feasible WSN-based monitoring for temperature, humidity, and illumination in agriculture sector., This work has also been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Internet of Underground Things ESP8266 WiFi Coverage Study

  • García, Laura
  • Parra-Boronat, Lorena
  • Abouaissa, Abdelhafid
  • Lorenz, Pascal
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The Internet of Underground Things (IoUT) is a novel concept regarding Internet of Things (IoT). It could have countless applications, particularly in agriculture as buried devices do not interfere with the machinery. Furthermore, wireless communication among buried and above ground devices would allow a significant cost reduction as wires would not need to be deployed and wires would not be destroyed by machinery or impede the correct performance of the activities performed by the workers of the field. In this paper, we perform a WiFi coverage study of ESP8266 nodes placed both underground and above ground so as to assess the current lack of knowledge in IoUT and the performance of low-cost controller boards for IoUT applications. Tests were performed with ESP8266 nodes buried at depths of 10 cm, 20 cm, 30 cm and 40 cm in a field located in an area of citrus fields. A node programmed as an AP (Access Point) was placed at several distances at a height of 50 cm. Results showed that the coverage was better for the node buried at a depth of 20 cm., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR and by the European Union with the Fondo Europeo Agrícola de Desarrollo Rural (FEADER) Europa invierte en zonas rurales¿, the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020 project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Optimized Probabilistic Delay Tolerant Network (DTN) Routing Protocol Based on Scheduling Mechanism for Internet of Things (IoT)

  • Mao, Yuxin
  • Zhou, Chenqian
  • Ling, Yun
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Many applications of Internet of Things (IoT) have been implemented based on unreliable wireless or mobile networks like the delay tolerant network (DTN). Therefore, it is an important issue for IoT applications to achieve efficient data transmission in DTN. In order to improve delivery rate and optimize delivery delay with low overhead in DTN for IoT applications, we propose a new routing protocol, called Scheduling-Probabilistic Routing Protocol using History of Encounters and Transitivity (PROPHET). In this protocol, we calculate the delivery predictability according to the encountering frequency among nodes. Two scheduling mechanisms are proposed to extend the traditional PROPHET protocol and improve performance in both storage and transmission in DTN. In order to evaluate the proposed routing protocol, we perform simulations and compare it with other routing protocols in an Opportunistic Network Environment (ONE) simulator. The results demonstrate that the proposed Scheduling-PROPHET can achieve better performances in several key aspects compared with the existing protocols., This work is partially supported by the grants from the Science and Technology Department of Zhejiang Province Program (NO. 2015C33062), the 2011 Collaborative Innovation Center of Zhejiang Province Program (NO. 15SMGK24YB), the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" (NO. TIN2017-84802-C2-1-P), and ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) Project (NO. RANETMED3-227 SMARTWATIR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deployment Strategies of Soil Monitoring WSN for Precision Agriculture Irrigation Scheduling in Rural Areas

  • García-García, Laura
  • Parra, Lorena
  • Parra-Boronat, Mar
  • Mauri, Pedro V.
  • Lorenz, Pascal
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Deploying wireless sensor networks (WSN) in rural environments such as agricultural fields may present some challenges that affect the communication between the nodes due to the vegetation. These challenges must be addressed when implementing precision agriculture (PA) systems that monitor the fields and estimate irrigation requirements with the gathered data. In this paper, different WSN deployment configurations for a soil monitoring PA system are studied to identify the effects of the rural environment on the signal and to identify the key aspects to consider when designing a PA wireless network. The PA system is described, providing the architecture, the node design, and the algorithm that determines the irrigation requirements. The testbed includes different types of vegetation and on-ground, near-ground, and above-ground ESP32 Wi-Fi node placements. The results of the testbed show high variability in densely vegetated areas. These results are analyzed to determine the theoretical maximum coverage for acceptable signal quality for each of the studied configurations. The best coverage was obtained for the near-ground deployment. Lastly, the aspects of the rural environment and the deployment that affect the signal such as node height, crop type, foliage density, or the form of irrigation are discussed., This research was funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Development of Inductive Sensor for Control Gate Opening of an Agricultural Irrigation System

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The monitoring of water level in the agriculture irrigation channels is essential to control the opening gates of these channels. In this way, WSNs (Wireless Sensor Networks) have high relevance to obtain this kind of data. In this paper, we propose a sensor to measure the depth changes in irrigation channels to control the gates opening. It is connected to an Adafruit Feather HUZZAH based on ESP8266, which allows us to build a mobile edge computing system. The developed sensor is based on two coils. Sinus-wave powers the first one, and the second is induced. The coils are winding over a polyvinyl chloride (PVC) that has high resistance for corrosion and low price. Besides, we use copper wire as a conductive metal. We test two different configurations of coils. P1 has five spires for the powered coil (PC) and ten spires for the induced coil (IC). On the other hand, P2 has 40 spires for the PC and 80 spires for the IC. The two prototypes were coiled in one layer. Then, both sensors are tested using a glass bottle where the water column increased with the target to obtain the information of the depth. In both prototypes, the difference of voltage between the maximum and minimum studied depths is more or less the same, 4.46V for P1 and 4.44V for P2. Nevertheless, during the stabilization test, the P1 showed better adaptation for the turbulences than the P2. The P1 shows an oscillation of 0.48V, where the P2 has a maximum fluctuation of 3.2V., This work has been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, and through the "Ayudas para contratacion predoctoral de Formacion del Profesorado Universitario FPU (Convocatoria 2016)". Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Quantifying the Production of Fruit-Bearing Trees Using Image Processing Techniques

  • García, Laura
  • Parra-Boronat, Lorena
  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Mar
  • García-Navas, José Luis
  • Lorenz, Pascal
  • Abouaissa, Abdelhafid
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Rocher, Javier|||0000-0003-0182-1671
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Sebastiá-Frasquet, M.-T.|||0000-0002-8042-5628
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • González Romero, Juan Andrés|||0000-0001-9986-9854
  • Roig-Merino, Bernat|||0000-0002-1437-7752
[EN] In recent years, the growth rate of world agricultural production and crop yields have decreased. Crop irrigation becomes essential in very dry areas and where rainfall is scarce, as in Egypt. Persimmon needs low humidity to obtain an optimal crop. This article proposes the monitoring of its performance, in order to regulate the amount of water needed for each tree at any time. In our work we present a technique that consists of obtaining images of some of the trees with fruit, which are subsequently treated, to obtain reliable harvest data. This technique allows us to have control and predictions of the harvest. Also, we present the results obtained in a first trial, through which we demonstrate the feasibility of using the system to meet the objectives set. We use 5 different trees in our experiment. Their fruit production is different (between 20 and 47kg of fruit). The correlation coefficient of the obtained regression model is 0.97., This work has been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, and by the Cooperativa Agrícola Sant Bernat Coop.V.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cluster-Based Communication Protocol and Architecture for a Wastewater Purification System Intended for Irrigation

  • Lloret, Jaime|||0000-0002-0862-0533
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Sendra, Sandra|||0000-0001-9556-9088
  • García-García, Laura
  • Lorenz, Pascal
[EN] The remote location of agricultural fields leads to the difficulty of deploying Precision Agriculture (PA) systems as there is no Internet access in those areas. Therefore, the use of long-range wireless technologies such as LoRa can provide connectivity to rural areas and allow monitoring PA systems remotely. In this paper, a heterogeneous architecture and protocol that allows communication with both WiFi and LoRa, including multiple hops in LoRa are presented. The design is based on a tree topology comprised of electronic devices deployed on different areas of interest for PA systems such as the canals of irrigation water, the fields, and the urban areas that generate wastewater. A set of practical tests with different configurations have been performed to determine the correct operation of the proposed protocol. The results show that the consumed bandwidth for both 433 MHz and 868 MHz frequency bands remained within the limits for the most restrictive LoRa configurations. Therefore, different deployment needs can be addressed with the implementation of this proposal. Furthermore, the use of packet transmission delays of 500 ms at the CH node results in high successful packet delivery rates., This work has been funded by the European Union through the ERANETMED (Euromediterranean Cooperation through European Research Area Net (ERANET) joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the ''Ministerio de Ciencia e Innovacion'' through the Project PID2020-114467RR-C33 and by ''Ministerio de Agricultura, Pesca y Alimentacion'' through the ''proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri)'' project GO TECNOGAR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparison of Single Image Processing Techniques and Their Combination for Detection of Weed in Lawns

  • Parra-Boronat, Lorena
  • Parra-Boronat, Mar
  • Torices, Virginia
  • Marín, José
  • Mauri, Pedro V.
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The detection of weeds in lawns is important due to the different negative effects of its presence. Those effects include a lack of uniformity and competition for the resources. If the weeds are detected early the phytosanitary treatment, which includes the use of toxic substances, will be more effective and will be applied to a smaller surface. In this paper, we propose the use of image processing techniques for weed detection in urban lawns. The proposed methodology is based on simple techniques in order to ensure that they can be applied in-situ. We propose two techniques, one of them is based on the mathematical combination of the red, green and blue bands of an image. In this case, two mathematical operations are proposed to detect the presence of weeds, according to the different colorations of plants. On the other hand, we proposed the use of edge detection techniques to differentiate the surface covered by grass from the surface covered by weeds. In this case, we compared 12 different filters and their combinations. The best results were obtained with the Laplacian filter. Moreover, we proposed to use pre-processing and post-processing operations to remove the soil and to aggregate the data with the aim of reducing the number of false positives. Finally, we compared both methods and their combination. Our results show that both methods are promising, and its combination reduces the number of false positives (0 false positives in the 4 evaluated images) ensuring the detection of all weeds., This work is partially found by the Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by the European Union with the "Fondo Europeo Agrícola de Desarrollo Rural (FEADER) - Europa invierte en zonas rurales", the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020 project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

WiFi and LoRa Energy Consumption Comparison in IoT ESP 32/ SX1278 Devices

  • García, Laura
  • Lorenz, Pascal
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The use of Internet of Things (IoT) devices has spread through many different fields. Transport, health, and energy management of farming are some of the areas where IoT systems are being utilized. The selection of the wireless communication technology for the IoT system is paramount for its optimal performance. However, factors such as desired coverage or energy consumption must be considered for this selection. In this paper, several tests to determine the battery life that can be obtained after performing WiFi and LoRa Low Power Wide Area Networks (LPWAN) transmissions with a low-cost IoT device has been performed. With a 5 second transmission interval and default settings, similar results were obtained for both WiFi and LoRa. Furthermore, WiFi outperformed LoRa with the default settings and a 30 second transmission interval. Lastly, LoRa did outperform WiFi when the settings where changed so as the transmission power of LoRa was that of 10 dBm., This work has been supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Smart Decision System for Digital Farming

  • Cambra-Baseca, Carlos
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
[EN] New technologies have the potential to transform agriculture and to reduce environmental impact through a green revolution. Internet of Things (IoT)-based application development platforms have the potential to run farm management tools capable of monitoring real-time events when integrated into interactive innovation models for fertirrigation. Their capabilities must extend to flexible reconfiguration of programmed actions. IoT platforms require complex smart decision-making systems based on data-analysis and data mining of big data sets. In this paper, the advantages are demonstrated of a powerful tool that applies real-time decisions from data such as variable rate irrigation, and selected parameters from field and weather conditions. The field parameters, the index vegetation (estimated using aerial images), and the irrigation events, such as flow level, pressure level, and wind speed, are periodically sampled. Data is processed in a decision-making system based on learning prediction rules in conjunction with the Drools rule engine. The multimedia platform can be remotely controlled, and offers a smart farming open data network with shared restriction levels for information exchange oriented to farmers, the fertilizer provider, and agricultural technicians that should provide the farmer with added value in the form of better decision making or more efficient exploitation operations and management., This paper has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR and by the "Ministerio de Ciencia, Innovacion y Universidades" through the "Ayudas para la adquisicion de equipamiento cientifico-tecnico, Subprograma estatal de infraestructuras de investigacion y equipamiento cientifico-tecnico (plan Estatal i+d+i 2017-2020)" (project EQC2018-004988-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Testing Existing Prototypes of Conductivity Sensors for Monitoring the Concentration of Organic Fertilizers in Fertigation Systems

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Agricultural production has grown in recent years, increasing the use of Organic Fertilizers (OF). For that reason, the use of these compounds must be controlled in fertigation water. In this paper, we test three prototypes, using different combinations of coils, to determine the amount of OF in the water. A coil is powered by a sine wave of 3.3 peak-to-peak Volts for inducing another coil. The objective of this system is to detect different kinds of problems that can cause incorrect fertilization, which affects the sustainability of agriculture. We present the tests to verify the proper functioning of the prototypes. We test our prototypes by means of different dilutions of OF. The used concentrations of OF are between 0 and 20 g/l. We measure the conductivity for each concentration and the output voltage of our prototypes. The results show that prototype 3 is the one that has the best performance, obtaining 1.47 V of difference between the maximum and minimum output voltage and a good correlation coefficient. Finally, a verification test is carried out; the average error in the different samples tested is 0.2212%., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by ¿Ministerio de Educación, Cultura y Deporte¿, through the ¿Ayudas para contratacion pre-doctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016)¿. Grant number FPU16/05540, and by Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Edge detection for weed recognition in lawns

  • Parra, Lorena
  • Marin, Jose
  • Yousfi, Salima
  • Rincón, Gregorio
  • Mauri Ablanque, Pedro Vicente
  • Lloret, Jaime
[EN] The rapid propagation of weeds is a major issue for turfgrass management (both ornamental and sports turf). While pesticides can ensure weed eradication, they pose a risk to human health and the environment. In this context, the early detection of weeds can allow a dramatic reduction in the amount of pesticide required. Here we present the use of edge detection techniques to identify the presence of these invasive plants in ornamental lawns and sports turf. Regarding the former, images from small experimental plots in the facilities of IMIDRA were used while images for the latter were taken on a golf course. Up to 12 different filters for edge detection were tested on the images collected. Aggregation techniques, with a range of cell values, were applied to the results of the three most effective filters (sharpening (I), sharpening (II), and Laplacian) to minimise the number of false positives. After the tests with different cell sizes, two filters were selected for more in-depth analysis. Box plots were selected to define the best cell size and identify the filter with the best performance. The sharpening (I) filter and the aggregation technique with the minimum value and a cell size of 10 offered the best results. Finally, we determined the most appropriate threshold value on the basis of the number of false positives, false negatives, and derived indexes (Precision, Recall, and F1-Score). A threshold of 78 gave the best performance. The results achieved with this methodology differed slightly between ornamental and sports turf., This work was partially funded by the Conselleria de Educacion, Cultura y Deporte through "Subvenciones para la contratacion de personal investigador en fase postdoctoral", grant number APOSTD/2019/04, by the European Union through ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by the European Union with the "Fondo Europeo Agricola de Desarrollo Rural (ERDF) - Europa invierte en zonas rurales", the MAPAMA, and Comunidad de Madrid with the IMIDRA, through the "PDR-CM 2014-2020" project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DADC: A Novel Duty-cycling Scheme for IEEE 802.15.4 Cluster-tree-based IoT Applications

  • Choudhury, Nikumani
  • Matam, Rakesh
  • Mukherjee, Mithun
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The IEEE 802.15.4 standard is one of the widely adopted specifications for realizing different applications of the Internet of Things. It defines several physical layer options and Medium Access Control (MAC) sublayer for devices with low-power operating at low data rates. As devices implementing this standard are primarily battery-powered, minimizing their power consumption is a significant concern. Duty-cycling is one such power conserving mechanism that allows a device to schedule its active and inactive radio periods effectively, thus preventing energy drain due to idle listening. The standard specifies two parameters, beacon order and superframe order, which define the active and inactive period of a device. However, it does not specify a duty-cycling scheme to adapt these parameters for varying network conditions. Existing works in this direction are either based on superframe occupation ratio or buffer/queue length of devices. In this article, the particular limitations of both the approaches mentioned above are presented. Later, a novel duty-cycling mechanism based on MAC parameters is proposed. Also, we analyze the role of synchronization schemes in achieving efficient duty-cycles in synchronized cluster-tree network topologies. A Markov model has also been developed for the MAC protocol to estimate the delay and energy consumption during frame transmission., This work is supported by Science and Engineering Research Board, Department of Science and Technology, Government of India under ECR 2016, Grant No. 2016/001651. This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia," "Subprograma Estatal de Generacion de Conocimiento," within the project under Grant No. TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) Project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IoT-Networks group-based model that uses AI for workgroup allocation

  • González Ramírez, Pedro Luis
  • Hurtado, Mikel
  • Lloret, Jaime|||0000-0002-0862-0533
  • Tomás Gironés, Jesús|||0000-0002-0358-0325
[EN] This paper presents a centralized management architecture model for designing workgroup-based Internet of Things (IoT) and Internet of Everything (IoE) networks. The architecture establishes the organization of an object according to its functions and capacities in layers. From its model, it is derived the design of the algorithms that give the network operation. These algorithms include the multi-protocol communication and interconnectivity algorithm, the routing algorithm, the resource sharing algorithm, and the grouping algorithm, all controlled by Artificial Intelligence (AI). The grouping algorithm consists of creating collaborative workgroups based on Machine Learning (ML) techniques that use the objects' features to allocating these within a workgroup that attends a type of service and within an architecture layer according to its capabilities. The model was tested with a simulation that shows the Machine-to-Machine (M2M) interaction between the devices involved in providing a service to a user within a Smart Home. This simulation uses an AI hosted within an IoT-Gateway to collect data on the features that define a connected object's functions and services. The extraction of the features is done using the Discovery of Functions and Services Protocol (DFSP) transported through an IoT-Protocol. With this information, the AI assigns a layer and a workgroup to a new object when it enters the network. The result of these tests can be used to know which ML technique has better accuracy., This work has been partially supported by the Ministerio de Economía y Competitividad in the Programa Estatal de Fomento de la Investigacion Científica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. At the Univeridad Central (Colombia), to the Smart City work team of the MAXWELL research group, for their special interest in generating new contributions to the networks (IoT & IoE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ceratophyllum demersum L. as Phytoindicator and Potential Phytoremediator of Lead Under Hydroponic Conditions

  • Fawzy, Manal
  • El-Khatib, Ahmed
  • Badr, Nadia
  • Abo-El-Kasem, Amany
  • Basterrechea-Chertudi, Daniel Andoni
  • Rocher, Javier|||0000-0003-0182-1671
[EN] The contamination of water by heavy metals like Pb is a huge problem for the environment. In this paper, we test Ceratophyllum demersum L. plants as phytoindicator. These were exposed to different concentrations of Pb for 1¿21 days, under hydroponic conditions, where they exhibited both adsorption and absorption efficiency. These efficiencies influenced in concentration and duration in a dependent manner. For the three initial treatments 0.125, 0.250, 0.500 ¿g/ml, the values of regression coefficients described the occurred variance on the rapid decrease in the Pb concentration in the hydroponic media, reflecting highest removal efficiency by C. demersum. Significant variation (P< 0.05) was recorded between the concentration of Pb accumulated in C. demersum at 0.125 and 0.250 ¿g/ml, while a highly significant value (P< 0.01) was recorded between them at 0.500 ¿g/ml. The regression coefficient denotes the pronounced impact of treatment concentration on the accumulation rate (R^2 = 0.9987). The adsorption efficiency of C. demersum appeared to be influenced by the Pb hydroponic media concentration, where after 21 days, the higher Pb adsorption was recorded at 0.125 ¿g/ml and the lowest one was obtained at 0.500 ¿g/ml. Results suggest that plants responded positively to the increase of Pb concentrations and they accumulated a high amount of metal. Due to metal removal coupled with detoxification potential, the plant appears to have potential for its use as phytoremediator species in aquatic environments., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte, through the Ayudas para contratacion predoctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016). Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart System for Bicarbonate Control in Irrigation for Hydroponic Precision Farming

  • Cambra-Baseca, Carlos
  • Lacuesta, Raquel
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Improving the sustainability in agriculture is nowadays an important challenge. The automation of irrigation processes via low-cost sensors can to spread technological advances in a sector very influenced by economical costs. This article presents an auto-calibrated pH sensor able to detect and adjust the imbalances in the pH levels of the nutrient solution used in hydroponic agriculture. The sensor is composed by a pH probe and a set of micropumps that sequentially pour the different liquid solutions to maintain the sensor calibration and the water samples from the channels that contain the nutrient solution. To implement our architecture, we use an auto-calibrated pH sensor connected to a wireless node. Several nodes compose our wireless sensor networks (WSN) to control our greenhouse. The sensors periodically measure the pH level of each hydroponic support and send the information to a data base (DB) which stores and analyzes the data to warn farmers about the measures. The data can then be accessed through a user-friendly, web-based interface that can be accessed through the Internet by using desktop or mobile devices. This paper also shows the design and test bench for both the auto-calibrated pH sensor and the wireless network to check their correct operation., The research leading to these results has received funding from "la Caixa" Foundation and Triptolemos Foundation. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy-aware Randomized Neighbor Discovery Protocol based on Collision Detection in Wireless Ad Hoc Networks

  • Sorribes, Jose Vicente
  • Peñalver Herrero, Mª Lourdes|||0000-0002-0403-7770
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Sendra, Sandra|||0000-0001-9556-9088
[EN] In wireless ad hoc networks, neighbor discovery is necessary as an initial step. In this work we present LECDH (Low Energy Collision Detection Hello), an energy-aware randomized handshake-based neighbor discovery protocol for static environments. We carried out simulations through Castalia 3.2 simulator and compared LECDH with an existing protocol EAH (Energy Aware Hello) used as reference. We conclude that the proposal outperforms the reference protocol both in one-hop and multi-hop environments in terms of Energy consumption, Discovery time, Number of discovered neighbors, Throughput, and Discoveries per packet sent, for high duty cycles. Moreover, for low number of nodes in LECDH, as the duty cycle is reduced the performance is better according to all 5 metrics in both environments. Overall, we found that our proposal follows more realistic assumptions and still allows nodes to succeed at discovering all their neighbors almost with probability 1. Moreover, a qualitative comparison of the reference solution and our proposal is included in this paper., This work has been partially supported by the "Ministerio de Economia y Competitividad" in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento" within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially founded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DronAway: A Proposal on the Use of Remote Sensing Drones as Mobile Gateway for WSN in Precision Agriculture

  • García, Laura
  • Parra-Boronat, Lorena
  • Mauri, Pedro V.
  • Lorenz, Pascal
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] The increase in the world population has led to new needs for food. Precision Agriculture (PA) is one of the focuses of these policies to optimize the crops and facilitate crop management using technology. Drones have been gaining popularity in PA to perform remote sensing activities such as photo and video capture as well as other activities such as fertilization or scaring animals. These drones could be used as a mobile gateway as well, benefiting from its already designed flight plan. In this paper, we evaluate the adequacy of remote sensing drones to perform gateway functionalities, providing a guide for choosing the best drone parameters for successful WiFi data transmission between sensor nodes and the gateway in PA systems for crop monitoring and management. The novelty of this paper compared with existing mobile gateway proposals is that we are going to test the performance of the drone that is acting as a remote sensing tool to carry a low-cost gateway node to gather the data from the nodes deployed on the field. Taking this in mind, simulations of different scenarios were performed to determine if the data can be transmitted correctly or not considering different flying parameters such as speed (from 1 to 20 m/s) and flying height (from 4 to 104 m) and wireless sensor network parameters such as node density (1 node each 60 m(2) to 1 node each 5000 m(2)) and antenna coverage (25 to 200 m). We have calculated the time that each node remains with connectivity and the time required to send the data to estimate if the connection will be bad, good, or optimal. Results point out that for the maximum node density, there is only one combination that offers good connectivity (lowest velocity, the flying height of 24 m, and antenna with 25 m of coverage). For the other node densities, several combinations of flying height and antenna coverage allows good and optimal connectivity., This work is partially founded by the European Union with the "Fondo Europeo Agricola de Desarrollo Rural (FEADER)-Europa invierte en zonas rurales", the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020" project number PDR18-XEROCESPED, by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A WiFi-Based Sensor Network for Flood Irrigation Control in Agriculture

  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Garcia-Fernandez, Julia
  • García, Laura
[EN] The role of agriculture in society is vital due to factors such as providing food for the population, is a major source of employment worldwide, and one of the most important sources of revenue for countries. Furthermore, in recent years, the interest in optimizing the use of water resources has increased due to aspects such as climate change. This has led to the introduction of technology in the fields by means of sensor networks that allow remote monitoring and control of cultivated lands. In this paper, we present a system for flood irrigation in agriculture comprised of a sensor network based on WiFi communication. Different sensors measure atmospheric parameters such as temperature, humidity, and rain, soil parameters such as humidity, and water parameters such as water temperature, salinity, and water height to decide on the need of activating the floodgates for irrigation. The user application displays the data gathered by the sensors, shows a graphical representation of the state of irrigation of each ditch, and allows farmers to manage the irrigation of their fields. Finally, different tests were performed on a plot of vegetables to evaluate the correct performance of the system and the coverage of the sensor network on a vegetated area with different deployment options., This work was partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the Programa Estatal de I+D+i Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2017-2020 (Project code: PID2020-114467RR-C33), and by proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri) in the framework Programa Nacional de Desarrollo Rural 2014-2020, GO TECNOGAR. This work was also partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adapting reinforcement learning for multimedia transmission on SDN

  • Rego Máñez, Albert
  • García-García, Laura
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Multimedia transmissions require a high quantity of resources to ensure their quality. In the last years, some technologies that provide a better resource management have appeared. Software defined networks (SDNs) are presented as a solution to improve this management. Furthermore, combining SDN with artificial intelligence (AI) techniques, networks are able to provide a higher performance using the same resources. In this paper, a redefinition of reinforcement learning is proposed. This model is focused on multimedia transmission in a SDN environment. Moreover, the architecture needed and the algorithm of the reinforcement learning are described. Using the Openflow protocol, several sample actions are defined in the system. Results show that using the system users perceive an increase in the image quality three times better. Moreover, the loss rate is reduced more than half the value of losses recorded when the algorithm is not applied. Regarding bandwidth, the maximum throughput increases from 987.16 kbps to 24.73 Mbps while the average bandwidth improves from 412.42 kbps to 7.83 Mbps., Ayudas para contratos predoctorales de Formación del Profesorado Universitario FPU (Convocatoria 2015), Grant/Award Number: FPU15/06837; Programa Estatal de Investigación Científica y Técnica de Excelencia (Convocatoria 2017), Grant/Award Number: TIN2017-84802-C2-1-P; Programa Estatal De Investigación, Desarrollo e Innovación Orientada a los retos de la sociedad (Convocatoria 2016), Grant/Award Number: TEC2016-76795-C6-4-R; ERANETMED, Grant/Award Number: ERANETMED3-227 SMARTWATIR
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Low-cost Soil Moisture Sensors Based on Inductive Coils Tested on Different Sorts of Soils

  • Parra-Boronat, Mar
  • Parra-Boronat, Lorena
  • Mauri, Pedro V.
  • Lloret, Jaime|||0000-0002-0862-0533
  • Llinares Palacios, Josep Vicent|||0000-0002-9740-3281
[EN] The use of precision agriculture and the Internet of Things has improved the efficiency of many cultures. Nevertheless, there are a few low-cost options to monitor soil moisture. Moreover, those options depend on the specific characteristics of the soil. In this paper, we attempt to find a sensor, based on mutual inductance, that could be used for more than one sort of soil. We study three prototypes, one of them with casing. The sensors are powered with a voltage of 10 peak to peak volts. One of the soils has a high content of organic matter and sand while the other is rich in sand and silt. The best prototype for the soil with high levels of organic matter has 10 turns on the powered coil and 5 on the induced coil. The best frequency for this sensor is 1340 kHz. For the soil with a significant quantity of silt, the best prototype has 80 turns on the powered coil and 40 on the induced coil. The frequency at which this sensor works best is 229 kHz, which happens to be its peak frequency. With those characteristics regressions lines with R2 values higher than 0.75 can be modeled, This work is partially found by the Conselleria de Educación, Cultura y Deporte with the Subvenciones para la contratación de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by the European Union with the Fondo Europeo Agrícola de Desarrollo Rural (FEADER) Europa invierte en zonas rurales, the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020 project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Sensor Based on Magnetic Fields for Monitoring the Concentration of Organic Fertilisers in Fertigation Systems

  • Basterrechea-Chertudi, Daniel Andoni
  • Parra-Boronat, Lorena
  • Mauri, Pedro V.
  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] In this paper, we test three prototypes with different characteristics for controlling the quantity of organic fertiliser in the agricultural irrigation system. We use 0.4 mm of copper diameter, distributing in different layers, maintaining the relation of 40 spires for powered coil and 80 for the induced coil. Moreover, we develop sensors with 8, 4, and 2 layers of copper. The coils are powered by a sine wave of 3.3 V peak to peak, and the other part is induced. To verify the functioning of this sensor, we perform several simulations with COMSOL Multiphysics to verify the magnetic field created around the powered coil, as well as the electric field, followed by a series of tests, using six samples between the 0 g/L and 20 g/L of organic fertiliser, and measure their conductivity. First, we find the working frequency doing a sweep for each prototype and four configurations. In this case, for all samples, making a sweep between 10 kHz and 300 kHz. We obtained that in prototype 1 (P1) (coil with 8 layers) the working frequency is around 100 kHz, in P2 (coil with 4 layers) around 110 kHz, and for P3 (coil with 2 layers) around 140 kHz. Then, we calibrate the prototypes measuring the six samples at four different configurations for each sensor to evaluate the possible variances. Likewise, the measures were taken in triplicate to reduce the possible errors. The obtained results show that the maximum difference of induced voltage between the lowest and the highest concentration is for the P2/configuration 4 with 1.84 V. Likewise, we have obtained an optimum correlation of 0.997. Then, we use the other three samples to verify the optimum functioning of the obtained calibrates. Moreover, the ANOVA simple procedure is applied to the data of all prototypes, in the working frequency of each configuration, to verify the significant difference between the values. The obtained results indicate that there is a significate difference between the average of concentration (g/L) and the induced voltage, and another with a level of 5% of significance. Finally, we compare all of the tested prototypes and configurations, and have determined that prototype three with configuration 1 is the best device to be used as a fertiliser sensor in water., This work is partially funded by the Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04, by the European Union, through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, and by the European Union with the "Fondo Europeo Agricola de Desarrollo Rural (FEADER)-Europa invierte en zonas rurales", the MAPAMA, and Comunidad de Madrid with the IMIDRA, under the mark of the PDR-CM 2014-2020" project number PDR18-XEROCESPED.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Collaborative LoRa-Based Sensor Network for Pollution Monitoring in Smart Cities

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • García-Navas, José Luis
  • Romero-Diaz, Pablo
[EN] With the aging of the car park in big cities, together with the fact that the number of users of private vehicles is increasing, the quality of air (QoA) in large cities has been worryingly reduced. Therefore, it is becoming increasingly necessary to implement new monitoring infrastructures to improve our smart cities. Therefore, in this paper, we present a collaborative Long Range (LoRa)-based sensor network for pollution monitoring in smart cities. The system is based on geo-located nodes capable of measuring the temperature, relative humidity and concentration of CO2 in urban environments. The system also takes into account the subjective opinions of citizens. By using the collected data and considering the restrictions policies of the city, the system in able to send the required orders to panels and traffic signs to control de traffic circulation. Finally, the citizens can be advised to avoid going to too polluted areas. The system has been testes in a real environment with very interesting results., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR, by the Ministerio de Economia, Industria y Competitividad, through the Convocatoria 2016 - Proyectos I+D+I - Programa Estatal De Investigación, Desarrollo e Innovación Orientada a los retos de la sociedad (Project TEC2016- 76795-C6-4-R), by the Ministerio de Ciencia, Innovación y Universidades through the Ayudas para la adquisición de equipamiento científico-técnico, Subprograma estatal de infraestructuras de investigación y equipamiento científicotécnico (plan Estatal I+D+i 2017-2020) (project EQC2018- 004988-P) and through the Research Contracts of Youth Employment of the University of Granada, through its operative program of Youth Guarantee of the Regional Government of Andalusia and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Water Conductivity Sensor based on Coils to Detect Illegal Dumpings in Smart Cities

  • Rocher, Javier|||0000-0003-0182-1671
  • Lloret, Jaime|||0000-0002-0862-0533
  • Basterrechea-Chertudi, Daniel Andoni
  • Taha, Miran
  • Parra-Boronat, Mar
[EN] The illegal dumpings in sewerage can cause problems in the Wastewater treatment plants. In this paper, we propose a system for detecting these illegal dumpings. We use conductivity sensor for detecting the change in the conductivity of water. Because this change may be due to a dump. The system is based on two coils, a coil is powered by a sinus-wave and induced the other coil. To prevent damaged for water in the copper we encapsulate the coils in a PVC tube. These coils are connected to flyport to send the values and generate alarms. We test with different configurations of coils with encapsulation of 3 and 1 mm. In the different prototypes tested have been seen that with the 3 mm encapsulation no significant differences are observed. The better prototypes are based on 40 spires of the powered coil and 80 spires in the induced coil. The best difference between samples of 0 and 40 g/l of table salt are in the prototype when the spires are distributed in 1 layer (6.06 V). Another prototype test with the same number of turns but distributed in 4 layers has a difference of 4.10 V. But during the verification phase we verified that this last prototype presents a relative error of 2.54% compared to 6.55% of the prototype distributed in a layer, This work has also been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activ-ities and beyond) project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte, through the Ayudas para contratacion predoctoral de Formación del Profesorado Universitario FPU (Convocatoria 2016). Grant number FPU16/05540.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Wireless Sensor Network Deployment for Soil Moisture Monitoring in Precision Agriculture

  • Lloret, Jaime|||0000-0002-0862-0533
  • Sendra, Sandra|||0000-0001-9556-9088
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • García-García, Laura
[EN] The use of precision agriculture is becoming more and more necessary to provide food for the world's growing population, as well as to reduce environmental impact and enhance the usage of limited natural resources. One of the main drawbacks that hinder the use of precision agriculture is the cost of technological immersion in the sector. For farmers, it is necessary to provide low-cost and robust systems as well as reliability. Toward this end, this paper presents a wireless sensor network of low-cost sensor nodes for soil moisture that can help farmers optimize the irrigation processes in precision agriculture. Each wireless node is composed of four soil moisture sensors that are able to measure the moisture at different depths. Each sensor is composed of two coils wound onto a plastic pipe. The sensor operation is based on mutual induction between coils that allow monitoring the percentage of water content in the soil. Several prototypes with different features have been tested. The prototype that has offered better results has a winding ratio of 1:2 with 15 and 30 spires working at 93 kHz. We also have developed a specific communication protocol to improve the performance of the whole system. Finally, the wireless network was tested, in a real, cultivated plot of citrus trees, in terms of coverage and received signal strength indicator (RSSI) to check losses due to vegetation., This work has been partially supported by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3227 SMARTWATIR, by the "Programa Estatal de I+D+i Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 2017-2020" (Project code: PID2020-114467RR-C33) and by "proyectos de innovacion de interes general por grupos operativos de la Asociacion Europea para la Innovacion en materia de productividad y sostenibilidad agricolas (AEI-Agri)" in the framework "Programa Nacional de Desarrollo Rural 2014-2020", GO TECNOGAR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analytical Models for Randomized Neighbor Discovery Protocols based on Collision Detection in Wireless Ad Hoc Networks

  • Sorribes, José Vicente
  • Lloret, Jaime|||0000-0002-0862-0533
  • Peñalver Herrero, Mª Lourdes|||0000-0002-0403-7770
[EN] Neighbor discovery is a crucial first step after the deployment of wireless ad hoc networks, which do not have a communications infrastructure. In this paper we present analytical models of randomized neighbor discovery protocols for static one-hop environments: CDPRR (Collision Detection Probabilistic Round Robin) and CDH (Collision Detection Hello). For CDPRR we assumed a geometric distribution and a uniform distribution for CDH. For comparison purposes, we chose two protocols from the literature, i.e., Hello and PRR, to be used as reference. To assess the performance of the proposals we carried out a mathematical study regarding six metrics, i.e., neighbor discovery time, energy consumption, overhead (number of packets sent), packet delivery ratio, the CDF of discoveries, and percentage of idle slots, and presented graphical results obtained from the equations. According to the analytical results, CDH protocol outperforms the other solutions regarding the neighbor discovery time, energy consumption, number of packets sent, packet delivery ratio and CDF of discoveries, while CDPRR achieves good results and it is better than Hello and PRR in terms of neighbor discovery time, energy consumption, CDF of discoveries and the overhead (number of packets sent). Moreover, we found that CDPRR presents more percentage of idle slots than PRR, which is a clear advantage in terms of energy consumed and number of packets sent. In addition, as novelty compared to the reference protocols, we found that both CDH and CDPRR protocols manage to discover all the neighbors, know when to terminate the discovery process, and achieve to operate under more realistic assumptions. We also focused the study on the CDH protocol varying the slot width, and demonstrated that the number of nodes in the network can be unknown, still providing reasonable results., This work has been partially supported by the "Ministerio de Economia y Competitividad'' in the "Programa Estatal de Fomento de la Investigacion Cientifica y Tecnica de Excelencia, Subprograma Estatal de Generacion de Conocimiento'' within the project under Grant TIN2017-84802-C2-1-P. This work has also been partially supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A WSN-based monitoring system to control Sewerage

  • Rocher, Javier|||0000-0003-0182-1671
  • Romero Martínez, José Oscar|||0000-0003-4081-9005
  • Lloret, Jaime|||0000-0002-0862-0533
  • García-Navas, José Luis
[EN] The sewerage is a critical infrastructure in cities because of the drainage of the urban runoff and the evacuation of the wastewater. Two types of sewerage, separated sewerage and combined sewerage, can be differentiated. In this paper, we show the application of a level sensor and a rain sensor for monitoring the separated sewerage. The level sensor is used for knowing if there is a critical level of water in the sewerage. The rain sensor is used to know if it is raining. The combination of this information allows the identification of three scenarios. These scenarios are normal situation, low drainage and illicit discharge/blockages in the pipeline. In addition, we study the use of sensors and mathematical models for monitoring the velocity of the wastewater. We concluded that the use of mathematical models is a good option for monitoring the velocity. Because with exception of the thermal sensors the other types of sensors show important gaps. The velocity is used to estimate the flow that is dumping in the water bodies. We use an ESP32 board program with Arduino IDE for data collection and sending the data to a server on the same network via Wi-Fi. The server is a computer that processes the data. We present the programming code and the ports that should be used for transmitting the data from Arduino to computer server., Supported by European Union through the project ERANETMED3-227 SMARTWATIR by the Ministerio de Educación, Cultura y Deporte. Grant number FPU16/05540
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

IoT-Based Smart Irrigation Systems: An Overview on the Recent Trends on Sensors and IoT Systems for Irrigation in Precision Agriculture

  • García-García, Laura
  • Parra, Lorena
  • Lorenz, Pascal
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Water management is paramount in countries with water scarcity. This also affects agriculture, as a large amount of water is dedicated to that use. The possible consequences of global warming lead to the consideration of creating water adaptation measures to ensure the availability of water for food production and consumption. Thus, studies aimed at saving water usage in the irrigation process have increased over the years. Typical commercial sensors for agriculture irrigation systems are very expensive, making it impossible for smaller farmers to implement this type of system. However, manufacturers are currently offering low-cost sensors that can be connected to nodes to implement affordable systems for irrigation management and agriculture monitoring. Due to the recent advances in IoT and WSN technologies that can be applied in the development of these systems, we present a survey aimed at summarizing the current state of the art regarding smart irrigation systems. We determine the parameters that are monitored in irrigation systems regarding water quantity and quality, soil characteristics and weather conditions. We provide an overview of the most utilized nodes and wireless technologies. Lastly, we will discuss the challenges and the best practices for the implementation of sensor-based irrigation systems., This work has been supported by European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Protocol and Architecture for a Wastewater Treatment System Intended for Irrigation

  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Lloret, Jaime|||0000-0002-0862-0533
  • Parra-Boronat, Lorena
  • García, Laura
  • Mauri, Pedro V.
  • Lorenz, Pascal
[EN] Water quality may be affected by aspects such as pollution from industries, agricultural fertilizers and pesticides, and waste produced by humans. This contamination can affect the produce of the fields irrigated by untreated water. Therefore, it is necessary to add a treatment process in irrigation systems. In this paper, an architecture, communication protocol, and a data analysis algorithm for a wastewater treatment system intended for irrigation are presented. Our system includes a smart group-based wireless sensor network that is able to detect high salinity levels and pollution stains, such as oil spills. When contamination is detected, the water is led into auxiliary canals that perform the biosorption process to treat the water and dump it back into the main canal. Simulations were performed to assess the amount of data stored on the secure digital (SD) card, the consumed bandwidth, and the energy consumption of our proposal. The results show the system has a low bandwidth consumption with a maximum of 2.58 kbps for the setting of two daily data transmissions of the node in the last auxiliary canal. Furthermore, it can sustain the energy consumption in adverse conditions, where the node with the highest energy consumption reaches the lowest energy value of 12,320 mW/h., This research was partially funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program and by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.