Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A Novel Route for the Easy Production of Thermochromic VO₂ Nanoparticles

  • Santos Izquierdo-Bueno, Antonio Jesús
  • Escanciano, Marta
  • Suárez Llorens, Alfonso
  • Yeste Siguenza, María del Pilar
  • Morales Sánchez, Francisco Miguel
In this work, a simple, fast and dry method for the fabrication of a thermochromic product with a high load of VO2 (M1) consisting of the controlled heat treatment of pure vanadium nanoparticles in air is presented. After a complete design of experiments, it is concluded that the most direct way to attain the maximum transformation of V into VO2 (M1) consists of one cycle with a fast heating ramp of 42°Cs-1 , followed by keeping 700°C for 530-600 seconds, and a subsequent cooling at 0.05°Cs-1 . Careful examination of these results lead to a second optimum, even more suitable for industrial production (quicker and less energy-intensive because of its lower temperatures and shorter times), consisting of subjecting V to two consecutive cycles of temperatures and times (625°C for 5 minutes) with similar preheating (42°Cs-1 ) but a much faster postcooling ( 8°Cs-1 ). These green reactions only use the power for heating a tube open to atmosphere and a vanadium precursor; without assistance of reactive gases or catalysts, and no special vacuum or pressure requirements. The best products present similar thermochromic properties but higher thermal stability than commercial VO2 particles. These methods can be combined with VO2 doping., A. J. Santos would like to thank the IMEYMAT Institute and the Spanish Ministerio de Educación y Cultura for the concessions of grants (ICARO-173873 and FPU16-04386). University of Cádiz and IMEYMAT are also agreed by financing the mutual facilities available at the UCA R&D Central Services (SC-ICYT), the UCA project references “PUENTE PR2020-003” and “OTRI AT2019/ 032”, and the IMEYMAT projects “PLP2019120-3” and “PLP2021120-1”. Additional support was given by the Spanish State Agency of Research through the “Retos” call (Project No. 1572, Ref. PID2020-114418RB-I00/ AEI / 10.13039/ 501100011033). The regional government of Andalusia with FEDER cofunding also participates through the projects AT-5983 Trewa 1157178 and FEDER-UCA18-10788, and the contract hiring M. Escanciano.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Controlled grain-size thermochromic VO2 coatings by the fast oxidation of sputtered vanadium or vanadium oxide films deposited at glancing angles

  • Santos Izquierdo-Bueno, Antonio Jesús
  • Lacroix, Bertrand
  • Domínguez de la Vega, Manuel
  • García Roja, Rafael
  • Martín, N.
  • Morales Sánchez, Francisco Miguel
An original, simple and cost-effective oxidation strategy to attain thermochromic vanadium dioxide thin films is reported. This two-step procedure comprises the initial deposition of DC magnetron-sputtered vanadium or vanadium oxide films by the combination of glancing angle deposition and, if needed, reactive gas pulsing process, followed by fast oxidation of such layers in air atmosphere at high temperatures. Thanks to the careful control of the thermal treatment parameters, and taking advantage of the superior reactivity of the high surface-to-volume porous deposited structures, the formation of pure VO2 (M1) layers was achieved. The comprehensive characterization of such oxidized systems by means of scanning electron microscopy, Raman spectroscopy and scanning-transmission electron microscopy techniques such as electron energy-loss spectroscopy, not only confirmed the presence of the VO2 (M1) phase, but also allowed to shed light on the key role that reaction time plays in the selective formation of vanadium dioxide films of adjustable grain size and crystallinity. The optimal conditions to stabilize thermochromic VO2 consists in using large deposition angles (85 degrees) and short oxygen pulses (<= 2 s) during the growth, followed by fast and short thermal treatments (<= 45 s with a heating rate of 42 degrees C s(-1)) in air atmosphere at 550 degrees C. The metal-to-insulator response of the accomplished VO2 layers was finally evaluated by means of temperature dependent Kelvin probe force microscopy measurements, evidencing surface potential drops at heating, greater than those reported in the literature to date for VO2 thin films., A. J. Santos would like to thank the IMEYMAT Institute and the Spanish Ministerio de Educacion y Cultura for the concessions of grants (ICARO-173873 and FPU16-04386) . The "Talent Attraction Program" of the University of Cadiz is acknowledged by supporting B. Lacroix contract code E-11-2017-0117214. University of Cadiz and IMEYMAT are also agreed by financing the mutual facilities available at the UCA R&D Central Services (SC-ICYT) , the UCA projects reference "PUENTE PR2018-040 '' and "PUENTE PR2020-003 '', and the IMEYMAT project references "LINEAS PRIORITARIAS PLP2019120-3 and PLP2021120-1 ''. This work was supported by the Spanish State R&D project (Retos y Generacion de Conocimiento) ref. PID2020-114418RB-I00/AEI/10.13039/501100011033. The regional government of Andalusia with FEDER cofunding also participates through the projects AT-5983 Trewa 1157178 and FEDER-UCA18-10788. M. Dominguez acknowledges financial support from the Spanish Ministerio de Ciencia e Innovacion under project reference EQC 2018-004704-P FEDER 2014-2020, "Modernizacion del Servicio de Microscopia de Fuerza Atomica (AFM) del IMEYMAT".
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Atmospheric flash annealing of low-dimensional vanadium nanolayers sputtered on glass substrates

  • Santos Izquierdo-Bueno, Antonio Jesús
  • Martín, N.
  • Outón Porras, Javier
  • Casas Acuña, Andrea
  • Blanco Ollero, Eduardo
  • García Roja, Rafael
  • Morales Sánchez, Francisco Miguel
A simple approach to attain low-dimensional, highly transparent VO2-based thermochromic coatings on glass substrates is reported. This two-step procedure comprises the initial deposition of DC magnetron-sputtered vanadium films and the subsequent flash annealing of such layers in air atmosphere. The careful control of the thermal treatment parameters and characterizations carried out by scanning electron microscopy and variable temperature Vis-NIR spectrophotometry allowed the optimization of VO2 yields for 12.5 nm and 25 nm thick layers. The impact of layer thickness and the nature of the thermal treatment itself on the thermochromic features of such systems were also evaluated. In this sense, the resulting systems developed asymmetric transmittance vs. temperature hysteresis loops as well as a surprisingly advantageous lowering of the phase transition temperature, which is achieved without the incorporation of dopants. The most promising results were obtained for a 12.5 nm thick layer flash annealed at 475 degrees C, which, despite having a moderate solar modulation ability (similar to 2%), could be a potential candidate for smart windows applications given its high Vis-NIR transparency (> 60%) coupled with its low transition temperature of 16 degrees C below the standard value for pure VO2.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Towards the optimization of a simple route for the fabrication of energy-efficient VO2-based smart coatings, Hacia la optimización de una ruta simple para la fabricación de recubrimientos inteligentes basados ​​en VO 2 energéticamente eficientes

  • Santos Izquierdo-Bueno, Antonio Jesús
  • Martin, Nicolas
  • Outón Porras, Javier
  • Blanco Ollero, Eduardo
  • García Roja, Rafael
  • Morales Sánchez, Francisco Miguel
The present work reports on the optimization of a simple two-step procedure to achieve thermochromic vanadium dioxide coatings. The effect of the layer thickness, the total surface area exposed, as well as different parameters involved in a fast annealing process leads to the selective oxidation in air atmosphere of vanadium films sputtered at glancing angles. Outcomes resulting from structural and optical characterizations of annealed films with different layer thicknesses and porosities disclose two optimal pathways for the fast heating synthesis of high-performance VO2-based coatings with unique thermochromic features. A first one at 475 °C with reaction times ranging from 40 to 60 s, ideal for thicker films (∼100 nm), which implies reaching pseudo-equilibrium states with the formation of a VO2 + VO2+x phase mixture. A second one more adapted for thinner samples (∼25 nm), which involves obtaining VO2-refined products through instantaneous reactions at 500 °C. The unusual balance achieved for luminous transmittance (>60%) and solar modulation ability (∼5%) through the second route, coupled with a remarkable decrease in the metal-to-insulator transition temperature without the need of using doping (up to 15 °C below that of the pure bulk VO2, i.e., ∼68 °C), make these initially porous systems potentially applicable in energy efficient smart glazing or resistive switching while paving the way for further initiatives towards the simple and cost-effective manufacturing of VO2 thermochromic coatings at a large scale. © 2023 The Author(s), El presente trabajo informa sobre la optimización de un procedimiento simple de dos pasos para lograr recubrimientos termocrómicos de dióxido de vanadio . El efecto del espesor de la capa, el área de superficie total expuesta, así como los diferentes parámetros involucrados en un proceso de recocido rápido conduce a la oxidación selectiva en atmósfera de aire de películas de vanadio pulverizadas en ángulos oblicuos. Los resultados resultantes de las caracterizaciones estructurales y ópticas de películas recocidas con diferentes espesores de capa y porosidades revelan dos vías óptimas para la síntesis por calentamiento rápido de VO 2de alto rendimientoRecubrimientos a base de policarbonato con características termocrómicas únicas. Una primera a 475 °C con tiempos de reacción entre 40 y 60 s, ideal para películas más gruesas (∼100 nm), lo que implica alcanzar estados de pseudo-equilibrio con la formación de una mezcla de fases VO 2 + VO 2+x . Una segunda más adaptada a muestras más delgadas (∼25 nm), que consiste en obtener productos refinados de VO 2 mediante reacciones instantáneas a 500 °C. El inusual equilibrio logrado entre la transmitancia luminosa (>60%) y la capacidad de modulación solar (∼5%) a través de la segunda vía, sumado a una notable disminución en la temperatura de transición metal-aislante sin necesidad de utilizar dopaje (hasta 15 °C por debajo del VO puro a granel2 , es decir, ∼68 °C), hacen que estos sistemas inicialmente porosos sean potencialmente aplicables en acristalamientos inteligentes eficientes energéticamente o conmutación resistiva, al mismo tiempo que allanan el camino para futuras iniciativas hacia la fabricación simple y rentable de recubrimientos termocrómicos de VO 2 a gran escala, A. J. Santos would like to thank the University of Cadiz and the Spanish Ministerio de Universidades for the concession of a "Margarita Salas" postdoctoral fellowship funded by the European Union - Next-GenerationEU (sol-202100211960-tra). J. Outon acknowledges the support by the Spanish Ministerio de Educacion y Cultura through grant FPU19-02638. University of Cadiz and IMEYMAT are also acknowledged by financing the mutual facilities available at the UCA R&D Central Services (SC-ICYT), the UCA project references "PUENTE PR2020-003" and "OTRI AT2019/032", and the IMEYMAT project reference "LINEAS PRIORITARIAS PLP2021120-1". This work was supported by the Spanish State R&D project (Retos y Generacion de Conocimiento) ref. PID2020-114418RBI00. The regional government of Andalusia with FEDER co-funding also participates through the projects AT-5983 Trewa 1157178 and FEDER-UCA18-10788. This work was partly supported by the french RENATECH network, FEMTO-ST technological facility, by the Region Bourgogne-Franche-Comte and by EIPHI Graduate School (Contract "ANR-17-EURE-0002").
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A simple two-step approach to the fabrication of VO2-based coatings with unique thermochromic features for energy-efficient smart glazing

  • Santos Izquierdo-Bueno, Antonio Jesús
  • Martin, Nicolas
  • Outón Porras, Javier
  • Blanco Ollero, Eduardo
  • García Roja, Rafael
  • Morales Sánchez, Francisco Miguel
Vanadium dioxide (VO2) is considered as one of the most promising materials for the next generation of energy-efficient smart glazing since it experiments a reversible metal-to-insulator transition at near room temperature. Nevertheless, the complexity and high cost associated to the fabrication of VO2-based nanostructures limit the transfer of this technology to the industrial scale. Aware of this opportunity, we present a simple and advantageous method for the fabrication of VO2 coatings on glass substrates which comprises the initial sputtering of vanadium thin films at glancing angles and the subsequent very fast oxidation of such systems in open air atmosphere. Relying on the accurate control of the thermal treatment parameters, as well as the enhanced reactivity of the high surface-to-volume porous deposited structures, thermochromic VO2 coatings were achieved and then characterized by means of scanning electron microscopy, grazing incidence X-ray diffraction, variable temperature UV-vis-NIR spectrophotometry, and resistivity measurements. These investigations allowed us to determine the key role that oxidation temperatures and times not only play in modulating the optical performance of the film, but also in the surprising and advantageous decrease in the transition temperature (up to 12 C lower than the standard value for pure VO2), which is attained without incorporating doping agents. This fact, together with the remarkable values of luminous transmittance ( 50 %) and solar modulation ability (5–10 %) accomplished for our best samples, opens up an alternative and simpler pathway towards the large-scale manufacturing of VO2 coatings for smart window applications, reaching, on a preliminary basis, similar or even better performances than those obtained so far for single and undoped VO2 films. 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND