Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Statistical Dataset and Data Acquisition System for Monitoring the Voltage and Frequency of the Electrical Network in an Environment Based on Python and Grafana

  • Fernández Morales, Javier
  • González de la Rosa, Juan José
  • Sierra Fernández, José María
  • Espinosa Gavira, Manuel Jesús
  • Florencias Oliveros, Olivia
  • Agüera Pérez, Agustín
  • Palomares Salas, José Carlos
  • Remigio Carmona, Paula
This article presents a unique dataset, from a public building, of voltage data, acquired using a hybrid measurement solution that combines Python (TM) for acquisition and Grafana (TM) for results representation. This study aims to benefit communities, by demonstrating how to achieve more efficient energy management. The study outlines how to obtain a more realistic vision of the quality of the supply, that is oriented to the monitoring of the state of the network; this should allow for better understanding, which should in turn enable the optimization of the operation and maintenance of power systems. Our work focused on frequency and higher order statistical estimators which, combined with exploratory data analysis techniques, improved the characterization of the shape of the stress signal. These techniques and data, together with the acquisition and monitoring system, present a unique combination of low-cost measurement solutions, which have the underlying benefit of contributing to industrial benchmarking. Our study proposes an effective and versatile system, which can do acquisition, statistical analysis, database management and results representation in less than a second. The system offers a wide variety of graphs to present the results of the analysis, so that the user can observe them and identify, with relative ease, any anomalies in the supply which could damage the sensitive equipment of the correspondent installation. It is a system, therefore, that not only provides information about the power quality, but also significantly contributes to the safety and maintenance of the installation. This system can be practically realized, subject to the availability of internet access.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Characterization of the Hydropower Inlet Effect on the Electric Network Frequency

  • Álvarez Higueruela, Jesús
  • Gutiérrez Villalba, Francisco José
  • Sierra Fernández, José María
  • González de la Rosa, Juan José
  • Florencias Oliveros, Olivia
  • Palomares Salas, José Carlos
  • Agüera Pérez, Agustín
  • Espinosa Gavira, Manuel Jesús
One of the challenges posed by renewable energies is the stabilization of parameters related to the quality of electrical energy. This study demonstrates the existence of a relationship between input blocks of hydropower and the variation of the fundamental frequency of the electricity grid. By mapping production data provided by the Spanish Electric Network with frequency measured in the laboratory, it is shown that gradients of hydropower are correlated with frequency fluctuations for certain characteristic times. Considering hourly instances of energy input, the study compares two methods for calculating hydropower gradients (linear regression and pseudo-linear regression) and two methods for calculating local frequency extrema (the “specular inertia” method and analysis by comparison with the moving average) in order to corroborate the results., 13 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Methodology for the Surveillance the Voltage Supply in Public Buildings Using the ITIC Curve and Python Programming

  • González de la Rosa, Juan José
  • Sierra Fernández, José María
  • Florencias Oliveros, Olivia
  • Remigio Carmona, Paula
  • Espinosa Gavira, Manuel Jesús
  • Agüera Pérez, Agustín
  • Palomares Salas, José Carlos
  • Fernández Morales, Javier
This paper proposes an easy-to-implement method for detecting and assessing two of the most frequent PQ (Power Quality) problems: voltage sags and swells. These can affect sensitive equipment such as computers, programmable logic controllers, contactors, etc. Therefore, it is of great interest to implement it in any laboratory, not only for protection reasons but also as a safeguard for claims against the supply company. Thanks to the actual context, in which it is possible to manage big volumes of data, connect multiple devices with IoT (Internet of Things), etc., it is feasible and of great interest to monitor the voltage at specific points of the network. This makes it possible to detect voltage sags and swells and diagnose which points are more prone to this type of problems. For the detection of sags and swells, a program written in Python is in charge of crawling all the files in the database and target those RMS values that fall outside the established limits. Compared to LabVIEW, which might have been the most logical alternative, being the acquisition hardware from the same company (National Instruments), Python has a higher computational performance and is also free of charge, unlike LabVIEW. Thanks to the libraries available in Python, it allows a hardware control close to what is possible using LabVIEW. Implemented in MATLAB, the ITIC (Information Technology Industry Council) power acceptability curve reflects the impact of these power quality disturbances in electrical power systems. The results showed that the combined action of Python and MATLAB performed well on a conventional desktop computer., 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Improving frequency characterization for power systems using the Allan variance and a GPS-controlled reference: Measurement procedure, test and validation

  • González de la Rosa, Juan José
  • Sierra Fernández, José María
  • Florencias Oliveros, Olivia
  • Espinosa Gavira, Manuel Jesús
  • Palomares Salas, José Carlos
  • Agüera Pérez, Agustín
La interconexión de las redes inteligentes modernas ha dado lugar a varias nuevas perturbaciones de la calidad de la energía (PQ) que afectan a los requisitos de estabilidad de frecuencia en los sistemas eléctricos industriales. La frecuencia, que oscila entre 50 ± 0,1 Hz para las redes interconectadas e incluso dentro del área síncrona europea, fluctúa principalmente debido al control primario. De hecho, debido al desarrollo de recursos distribuidos (por ejemplo, energías renovables), no todas las unidades de generación son accesibles y solo son controlables en unos pocos nodos de la red. Esta variabilidad, incluso entre ubicaciones cercanas, desencadena la necesidad de estrategias de medición específicas, basadas en una referencia absoluta y también concebidas para monitorear las perturbaciones de PQ. Este trabajo propone un método sincronizado con GPS, fácil de implementar, que permite la medición de frecuencia con una precisión mejor que la requerida por la regulación actual para redes interconectadas. Este trabajo explica la metodología de medición, caracterizando la incertidumbre mediante el uso de la norma ISO JCGM 100. Con el propósito de probar y validar, se llevaron a cabo tres experimentos: perturbaciones de laboratorio diseñadas por computadora y activadas por instrumentos, y una comparación con el desempeño de PMU, utilizando señales de la vida real. Los resultados mostraron que estos experimentos ofrecieron un mejor desempeño con una incertidumbre mejorada., The interconnected modern smart grid has resulted in several new power quality (PQ) disturbances that affect the frequency stability requirements in industrial power systems. Ranging between 50 +-0.1 Hz for interconnected networks, and even within the European synchronous area, the frequency fluctuates mainly because of the primary control. In fact, owing to the development of distributed resources (e.g. renewable energies), not all generation units are accessible, and are controllable in a few network nodes. This variability, even between nearby locations, triggers the need for a specific measurement strategies, based on an absolute reference and also conceived for monitoring PQ disturbances. This work proposes an easy-to-implement GPS-traceable method that allows the measurement of frequency with better accuracy than that required by the current regulation for interconnected networks. This work explains the measurement methodology, characterising the uncertainty by using ISO JCGM 100. For the purpose of testing and validation, three experiments were conducted: computer-designed, instrument-triggered lab disturbances, and a comparison vs. PMU performance, using real-life signals. The results showed that these experiments offered better performance with improved uncertainty, Ministerio de Ciencia y Educación, Gobierno de España; Universidad de Cádiz; Junta de Andalucía., 12 páginas en la versión maquetada.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Online System for Power Quality Operational Data Management in Frequency Monitoring Using Python and Grafana

  • Sierra Fernández, José María
  • Florencias Oliveros, Olivia
  • Espinosa Gavira, Manuel Jesús
  • González de la Rosa, Juan José
  • Agüera Pérez, Agustín
  • Palomares Salas, José Carlos
This article proposes a measurement solution designed to monitor the instantaneous frequency in power systems. It uses a data acquisition module and a GPS receiver for time stamping and traceability. A Python-based module receives data, computes the frequency, and finally transfers the measurement results to a database. The frequency is calculated with two different methods, which are compared in the article. The stored data is visualized using the Grafana platform, thus demonstrating its potential for comparing scientific data. The system as a whole constitutes an efficient, low-cost solution as a data acquisition system., This research is funded by the Spanish Ministry of Science and Education through the project PID2019-108953RB-C21; has been co-financed by the European Union under the 2014-2020 ERDF Operational Program. Additionally, funding for frequency monitoring comes from the Andalusian-FEDER project FEDER-UCA18-108516 (Intelligent Techniques for visualization and data compression of PQ data in the smart grid).