Pasar al contenido principal

MATERIA BLANDA Y NANOFLUIDOS EN MULTIPLES ESCALAS

FIS2013-47350-C5-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Effect of orientational restriction on monolayers of hard ellipsoids

  • Varga, Szabolcs
  • Martínez-Ratón, Yuri
  • Velasco, Enrique
  • Bautista Carbajal, Gustavo
  • Odriozola, Gerardo
The effect of out-of-plane orientational freedom on the orientational ordering properties of a monolayer of hard ellipsoids is studied using the Parsons-Lee scaling approach and replica exchange Monte Carlo computer simulation. Prolate and oblate ellipsoids exhibit very different ordering properties, namely, the axes of revolution of prolate particles tend to lean out, while those of oblate ones prefer to lean into the confining plane. The driving mechanism of this is that the particles try to maximize the available free area on the confining surface, which can be achieved by minimizing the cross section areas of the particles with the plane. In the lack of out-of-plane orientational freedom the monolayer of prolate particles is identical to a two-dimensional hard ellipse system, which undergoes an isotropic-nematic ordering transition with increasing density. With gradually switching on the out-of-plane orientational freedom the prolate particles lean out from the confining plane and destabilisation of the in-plane isotropic-nematic phase transition is observed. The system of oblate particles behaves oppositely to that of prolates. It corresponds to a two-dimensional system of hard disks in the lack of out-of-plane freedom, while it behaves similar to that of hard ellipses in the freely rotating case. Solid phases can be realised by lower surface coverage due to the out-of-plane orientation freedom for both oblate and prolate shapes., SV acknowledges the financial support from the Hungarian State and the European Union under the TAMOP-4.2.2.A-11/1/ KONV-2012-0071. Grant FIS2013-47350-C5-1-R from Ministerio de Educación y Ciencia of Spain is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically resolved three-dimensional structures of electrolyte aqueous solutions near a solid surface

  • Martín-Jiménez, Daniel
  • Chacón, Enrique
  • Tarazona, Pedro
  • García García, Ricardo
Supplementary information: 1. Supplementary Figures 1-7, Supplementary Methods and Supplementary References [pdf file].-- 2. Supplementary Movie 2: 3D AFM image of the mical-KCl aqueous solution (~ 4 M) was obtained by exciting the cantilever at 838 kHz (2nd eigenmode); k= 921 N/m, Q= 24; A0= 0.11 nm. Data points= 1984000 [movie].-- 3. Supplementary Movie 3: 3D AFM image of the mical-NaCl aqueous solution (~ 5 M) was obtained by exciting the cantilever at 159 kHz (1st eigenmode), k= 24 N/m, Q= 7; A0= 0.23 nm. Data points = 2400000 [movie]., Interfacial liquid layers play a central role in a variety of phenomena ranging from friction to molecular recognition. Liquids near a solid surface form an interfacial layer where the molecular structure is different from that of the bulk. Here we report atomic resolution three-dimensional images of electrolyte solutions near a mica surface that demonstrate the existence of three types of interfacial structures. At low concentrations (0.01–1 M), cations are adsorbed onto the mica. The cation layer is topped by a few hydration layers. At higher concentrations, the interfacial layer extends several nanometres into the liquid. It involves the alternation of cation and anion planes. Fluid Density Functional calculations show that water molecules are a critical factor for stabilizing the structure of the interfacial layer. The interfacial layer stabilizes a crystal-like structure compatible with liquid-like ion and solvent mobilities. At saturation, some ions precipitate and small crystals are formed on the mica., This work was funded by the European Research Council ERC-AdG-340177 (3DNanoMech) and Spanish Ministry of Science and Innovation (CSD2010-00024, FIS2013-47350-C5, MDM-2014-0377)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral self-assembly of helical particles

  • Kolli, Hima Bindu
  • Cinacchi, Giorgio
  • Ferrarini, Alberta
  • Giacometti, Archille
The shape of the building blocks plays a crucial role in directing self-assembly towards desired architectures. Out of the many different shapes, the helix has a unique position. Helical structures are ubiquitous in nature and a helical shape is exhibited by the most important biopolymers like polynucleotides, polypeptides and polysaccharides as well as by cellular organelles like flagella. Helical particles can self-assemble into chiral superstructures, which may have a variety of applications, e.g. as photonic (meta)materials. However, a clear and definite understanding of these structures has not been entirely achieved yet. We have recently undertaken an extensive investigation on the phase behaviour of hard helical particles, using numerical simulations and classical density functional theory. Here we present a detailed study of the phase diagram of hard helices as a function of their morphology. This includes a variety of liquid-crystal phases, with different degrees of orientational and positional ordering. We show how, by tuning the helix parameters, it is possible to control the organization of the system. Starting from slender helices, whose phase behaviour is similar to that of rodlike particles, an increase in curliness leads to the onset of azimuthal correlations between the particles and the formation of phases specific to helices. These phases feature a new kind of screw order, of which there is experimental evidence in colloidal suspensions of helical flagella., G. C. thanks the Government of Spain for the award of a Ramón y Cajal research fellowship and the financial support under the grant FIS2013-47350-C5-1-R. This work was also supported by MIUR PRIN-COFIN2010-2011 (contract 2010LKE4CC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-solid transitions induced by repulsive interactions revisited

  • Navascués, G.
  • Velasco, E.
  • Mederos, Luis
We revisit a problem already studied 15 years ago by us in collaboration with Stell and Hemmer: the isostructural solid–solid transitions induced by repulsive particle interactions exhibited by classical systems interacting via the Stell–Hemmer potentials. The full phase diagram in the crystal region is obtained by applying a perturbation theory for classical solids used during our collaboration with Stell. Also, the performance of such a theory is now tested by comparing the perturbative phase diagram with that obtained from computer simulations. The latter was calculated using a recently refined method to obtain the free-energy of crystals by means of Monte Carlo simulations. The perturbation theory captures the correct topology and correctly identifies the stable, fcc and bcc, phases. In addition, the theory predicts the occurrence of special points: a point where the two stable structures coexist at the same density, and two critical points terminating the corresponding isostructural phase transitions for fcc and bcc phases. The location of some of these features in the phase diagram is predicted almost quantitatively. However, phase boundaries involving the non-compact bcc phase are much less accurate, a problem that can be traced to the poor representation used for the bcc phase of the reference, hard-sphere, system., We acknowledge financial support from MINECO (Spain) under grants FIS2013-47350-C5-1-R and FIS2013-47350-C5-4-R., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cholesteric and screw-like nematic phases in systems of helical particles

  • Cinacchi, Giorgio
  • Ferrarini, Alberta
  • Giacometti, Archille
  • Kolli, Hima Bindu
Recent numerical simulations of hard helical particle systems unveiled the existence of a novel chiral nematic phase, termed screw-like, characterised by the helical organization of the particle C symmetry axes round the nematic director with periodicity equal to the particle pitch. This phase forms at high density and can follow a less dense uniform nematic phase, with relative occurrence of the two phases depending on the helix morphology. Since these numerical simulations were conducted under three-dimensional periodic boundary conditions, two questions could remain open. First, the real nature of the lower density nematic phase, expected to be cholesteric. Second, the influence that the latter, once allowed to form, may have on the existence and stability of the screw-like nematic phase. To address these questions, we have performed Monte Carlo and molecular dynamics numerical simulations of helical particle systems confined between two parallel repulsive walls. We have found that the removal of the periodicity constraint along one direction allows a relatively-long-pitch cholesteric phase to form, in lieu of the uniform nematic phase, with helical axis perpendicular to the walls while the existence and stability of the screw-like nematic phase are not appreciably affected by this change of boundary conditions., G. C. thanks the Government of Spain for the award of a Ramón y Cajal research fellowship and acknowledges its financial support under Grant Nos. FIS2013-47350-C5-1-R and MDM-2014-0377. This work was also supported by Italy MIUR via No. PRIN-2010-2011 programme under Grant No. 2010LKE4CC.