Pasar al contenido principal

TEORIA Y SIMULACION DE SISTEMAS COMPLEJOS

FIS2013-47350-C5-4-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Short-Chain Alcohol and Alcohol-Water Adsorption in MEL and MFI Zeolites

  • Gomez-Alvarez, Paula
  • González -Noya, Eva
  • Lomba, E.
  • Pires, Joao
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In this paper, we present a comparative study of the adsorption behavior of short chain alcohols (pure and in aqueous solution) into silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). For quite some time, silicalite-1 has been the reference material to address the problem of adsorptive-based separation, mostly for hydrocarbon mixtures. Interestingly, being structurally close to silicalite-1, adsorption studies using silicalite-2 are scarce and to the best of our knowledge, a comparative study of their behavior for alcohol water mixtures has not been published to date. We have here resorted to molecular simulation techniques to analyze the adsorption and diffusion phenomena in both zeolites at 25 and 50 degrees C for pure methanol, ethanol, 1-butanol, and water, and for some relevant compositions of alcohol/water mixtures. In addition to the dilute regime in the mixture, our study ranges from intermediate alcohol concentrations to alcohol-rich phases, relevant to alcohol purification processes. Besides, we have performed volumetric and calorimetric measurements of single-component adsorption of alcohols in pure silica MEL zeolite, which were used to validate the model potentials used in the simulations. We observe that the zigzag channels of MFI zeolite are most likely responsible for its somewhat higher affinity for alcohols. This leads to higher adsorption selectivities when compared to those of MEL zeolite. We have also found that the choice of water model strongly conditions water coadsorption into the zeolites and subsequently the predictions of the adsorbent's selectivity in alcohol/water systems. Despite considerable differences for adsorbed pure components, diffusivities of alcohol and water adsorbed from mixtures are relatively similar, as a consequence of the strong hydrogen bonds between hydroxyl groups and water., E.L. and E.G.N. acknowledge the support from the Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (FEDER) under grants No. FIS2017-89361-C3-2-P and FIS2013-47350-05-4-R S.V. thanks J.A. Vidal-Moya for collecting the NMR data and acknowledges financial support from Spanish government (grants MAT2015-71842-P and SEV-2016-0683). J.P. thanks Fundacao para a Ciencia e a Tecnologia (FCT) for funding the project UID/MULTI/00612/2013 (C.QB.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and Simulation Studies of the Stepped Adsorption of Toluene on Pure-Silica MEL Zeolite

  • Sánchez-Gil, V.
  • Noya, Eva G.
  • Sanz, Alejandro
  • Khatib, S. J.
  • Guil, J. M.
  • Lomba, Enrique
  • Marguta, Ramona G.
  • Valencia, Susana
In this work, the adsorption of toluene on pure-silica MEL zeolite is investigated using a variety of experimental and simulation methods. First, we measured the volumetric and calorimetric isotherms at 301 K and at 315 K. The volumetric adsorption isotherm presents a substep at a loading of roughly 4 molecules per unit cell that shifts to higher pressures at higher temperatures and that coincides with a sudden increase in the isosteric heat of adsorption. Grand canonical Monte Carlo simulations reveal that the substep at half load is caused by the adsorption of toluene molecules at different energetic sites within the porous network. According to this, toluene molecules occupy first the intersections, and once all intersections are filled, additional toluene molecules place themselves within the channels. The structure of the adsorbate/adsorbent system was further investigated by performing X-ray powder diffraction experiments of the zeolite at three different loads: empty, at half load (before the substep), and at high load (after the substep). Numerous new low intensity peaks and splittings of existing peaks at the empty and half-loaded diffractograms appear in the diffraction pattern of the high load sample. Atomic structural models compatible with the experimental spectra were obtained by performing N-reverse Monte Carlo simulations. Whereas at half load a good fit of the experimental diffraction pattern can be obtained using the rigid zeolite approximation, at high load, this is only possible when the flexibility of the zeolite is incorporated. In this structural model, the channel cross sections are deformed from a nearly circular shape in the empty zeolite to a more elliptical shape in the case of the high load zeolite., Dirección General de Investigación Cientifica y Técnica under Grants No. FIS2013-47350-C5-4-R, MAT2012-38567-C02-0, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lattice model for water-solute mixtures

  • Furlan, A.P.
  • Almarza, Noé G.
  • Barbosa, M.C.
A lattice model for the study of mixtures of associating liquids is proposed. Solvent and solute are modeled by adapting the associating lattice gas (ALG) model. The nature of interaction of solute/solvent is controlled by tuning the energy interactions between the patches of ALG model. We have studied three set of parameters, resulting in, hydrophilic, inert, and hydrophobic interactions. Extensive Monte Carlo simulations were carried out, and the behavior of pure components and the excess properties of the mixtures have been studied. The pure components, water (solvent) and solute, have quite similar phase diagrams, presenting gas, low density liquid, and high density liquid phases. In the case of solute, the regions of coexistence are substantially reduced when compared with both the water and the standard ALG models. A numerical procedure has been developed in order to attain series of results at constant pressure from simulations of the lattice gas model in the grand canonical ensemble. The excess properties of the mixtures, volume and enthalpy as the function of the solute fraction, have been studied for different interaction parameters of the model. Our model is able to reproduce qualitatively well the excess volume and enthalpy for different aqueous solutions. For the hydrophilic case, we show that the model is able to reproduce the excess volume and enthalpy of mixtures of small alcohols and amines. The inert case reproduces the behavior of large alcohols such as propanol, butanol, and pentanol. For the last case (hydrophobic), the excess properties reproduce the behavior of ionic liquids in aqueous solution., Partial financial support from the Dirección General de Investigación Científica y Técnica (Spain) under Grant No. FIS2013-47350-C5-4-R, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of confinement on pattern formation in two dimensional systems with competing interactions

  • Almarza, Noé G.
  • Pekalski, J.
  • Ciach, A.
Template-assisted pattern formation in monolayers of particles with competing short-range attraction and long-range repulsion interactions (SALR) is studied by Monte Carlo simulations in a simple generic model [N. G. Almarza et al., J. Chem. Phys., 2014, 140, 164708]. We focus on densities corresponding to formation of parallel stripes of particles and on monolayers laterally confined between straight parallel walls. We analyze both the morphology of the developed structures and the thermodynamic functions for broad ranges of temperature T and the separation L between the walls. At low temperature stripes parallel to the boundaries appear, with some corrugation when the distance between the walls does not match the bulk periodicity of the striped structure. The stripes integrity, however, is rarely broken for any L. This structural order is lost at T = T(L) depending on L according to a Kelvin-like equation. Above the Kelvin temperature T(L) many topological defects such as breaking or branching of the stripes appear, but a certain anisotropy in the orientation of the stripes persists. Finally, at high temperature and away from the walls, the system behaves as an isotropic fluid of elongated clusters of various lengths and with various numbers of branches. For L optimal for the stripe pattern the heat capacity as a function of temperature takes the maximum at T = T(L)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assembly of trivalent particles under confinement: from an exotic solid phase to a liquid phase at low temperature

  • Noya, Eva G.
  • Almarza, Noé G.
  • Lomba, Enrique
Using computer simulations, we study the phase diagram of a two-dimensional system of disk particles with three patches distributed symmetrically along the particle equator. The geometry of the particles is compatible with a honey-comb lattice at moderately low temperature and pressure, whereas it is expected that the system forms a close-packed triangular lattice at high temperature and pressure. The effect of patch size within the single bond per patch regime was investigated, and it was found that the topology of the phase diagram changes drastically with patch size. Interestingly, in particles with small patches (with a half opening angle of 10 1 ), the fluid transforms upon increasing the pressure into a rather exotic phase that can be understood as a honey-comb lattice whose voids are filled continuously with additional particles that remain, on average, unbound. Eventually, all the voids are occupied so that particles are located at the positions of a triangular lattice, but only two thirds of the particles are orientationally ordered whereas the remaining one third can rotate almost freely as in a plastic crystal. At moderately low temperature, the fluid transforms into a nearly empty honey-comb lattice, whereas at high temperature it transforms directly into the almost filled lattice. Interestingly, for particles with big patches (with a half opening angle of 20 1 ), the honey-comb and triangular lattices are separated by a liquid phase that remains stable down to fairly low temperatures. Less surprisingly, only particles with big patches exhibit an equilibrium gas–liquid separatrion, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disordered hyperuniformity in two-component nonadditive hard-disk plasmas

  • Lomba, Enrique
  • Weis, J.J.
  • Torquato, S.
We study the behavior of a classical two-component ionic plasma made up of nonadditive hard disks with additional logarithmic Coulomb interactions between them. Due to the Coulomb repulsion, long-wavelength total density fluctuations are suppressed and the system is globally hyperuniform. Short-range volume effects lead to phase separation or to heterocoordination for positive or negative nonadditivities, respectively. These effects compete with the hidden long-range order imposed by hyperuniformity. As a result, the critical behavior of the mixture is modified, with long-wavelength concentration fluctuations partially damped when the system is charged. It is also shown that the decrease of configurational entropy due to hyperuniformity originates from contributions beyond the two-particle level. Finally, despite global hyperuniformity, we show that in our system the spatial configuration associated with each component separately is not hyperuniform, i.e., the system is not >multihyperuniform., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NRMC- a GPU code for N-Reverse Monte Carlo modeling of fluids in confined media

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature of maximum density and excess properties of short-chain alcohol aqueous solutions: A simplified model simulation study

  • Furlan, A.P.
  • Lomba, Enrique
  • Barbosa, M.C.
We perform an extensive computational study of binary mixtures of water and short-chain alcohols resorting to two-scale potential models to account for the singularities of hydrogen bonded liquids. Water molecules are represented by a well studied core softened potential which is known to qualitatively account for a large number of water’s characteristic anomalies. Along the same lines, alcohol molecules are idealized by dimers in which the hydroxyl groups interact with each other and with water with a core softened potential as well. Interactions involving non-polar groups are all deemed purely repulsive. We find that the qualitative behavior of excess properties (excess volume, enthalpy, and constant pressure heat capacity) agrees with that found experimentally for alcohols such as t-butanol in water. Moreover, we observe that our simple solute under certain conditions acts as a “structure-maker,” in the sense that the temperature of maximum density of the bulk water model increases as the solute is added, i.e., the anomalous behavior of the solvent is enhanced by the solute., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature of maximum density for aqueous mixtures of three pentanol isomers

  • Zemánková, K.
  • González-Salgado, D.
  • Lomba, Enrique
  • Romaní, L.
Densities of several aqueous mixtures of 2-pentanol, 3-pentanol, and 2-methyl-2-butanol in the diluted alcohol region were determined in the temperature interval (273.65–282.15) K at atmospheric pressure using the Anton Paar DSA48 vibrating tube densimeter. The variation of the temperature of maximum density with respect to that in pure water ΔT, its structural contribution ΔT, as well as the partial molar volume of the alcohol v and its excess magnitude v were calculated. It was found that ΔT decreases as the alcohol mole fraction x increases whereas ΔT increases. In both magnitudes, the values for the mixtures of 2-methyl-2-butanol were higher than those of 2-pentanol and 3-pentanol which were found very similar. The secondary or tertiary character of the alcohol seems to be the origin of such differences in complete agreement with previous findings. The slope of the v-T curve was positive over the working mole fraction interval whereas that of the v -T curve was negative, in complete agreement with the tendencies observed for the ΔT-x and ΔT-x curves, respectively. The consistency check proposed by Armitage et al. was thus once fulfilled., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The uniform quantized electron gas revisited

  • Lomba, Enrique
  • Hoye, J.S.
In this article we continue and extend our recent work on the correlation energy of the quantized electron gas of uniform density at temperature T = 0. As before, we utilize the methods, properties, and results obtained by means of classical statistical mechanics. These were extended to quantized systems via the Feynman path integral formalism. The latter translates the quantum problem into a classical polymer problem in four dimensions. Again, the well known RPA (random phase approximation) is recovered as a basic result which we then modify and improve upon. Here we analyze the condition of thermodynamic selfconsistency. Our numerical calculations exhibit a remarkable agreement with well known results of a standard parameterization of Monte Carlo correlation energies., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature of maximum density and excess thermodynamics of aqueous mixtures of methanol

  • González-Salgado, D.
  • Zemánková, K.
  • Noya, Eva G.
  • Lomba, Enrique
In this work, we present a study of representative excess thermodynamic properties of aqueous mixtures of methanol over the complete concentration range, based on extensive computer simulation calculations. In addition to test various existing united atom model potentials, we have developed a new force-field which accurately reproduces the excess thermodynamics of this system. Moreover, we have paid particular attention to the behavior of the temperature of maximum density (TMD) in dilute methanol mixtures. The presence of a temperature of maximum density is one of the essential anomalies exhibited by water. This anomalous behavior is modified in a non-monotonous fashion by the presence of fully miscible solutes that partly disrupt the hydrogen bond network of water, such as methanol (and other short chain alcohols). In order to obtain a better insight into the phenomenology of the changes in the TMD of water induced by small amounts of methanol, we have performed a new series of experimental measurements and computer simulations using various force fields. We observe that none of the force-fields tested capture the non-monotonous concentration dependence of the TMD for highly diluted methanol solutions., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uniform quantized electron gas

  • Høye, J.S.
  • Lomba, Enrique
In this work we study the correlation energy of the quantized electron gas of uniform density at temperature T = 0. To do so we utilize methods from classical statistical mechanics. The basis for this is the Feynman path integral for the partition function of quantized systems. With this representation the quantum mechanical problem can be interpreted as, and is equivalent to, a classical polymer problem in four dimensions where the fourth dimension is imaginary time. Thus methods, results, and properties obtained in the statistical mechanics of classical fluids can be utilized. From this viewpoint we recover the well known RPA (random phase approximation). Then to improve it we modify the RPA by requiring the corresponding correlation function to be such that electrons with equal spins can not be on the same position. Numerical evaluations are compared with well known results of a standard parameterization of Monte Carlo correlation energies., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disordered multihyperuniformity derived from binary plasmas

  • Lomba, Enrique
  • Weis, J.J.
  • Torquato, S.
Disordered multihyperuniform many-particle systems are exotic amorphous states that allow exquisite color sensing capabilities due to their anomalous suppression of density fluctuations for distinct subsets of particles, as recently evidenced in photoreceptor mosaics in avian retina. Motivated by this biological finding, we present a statistical-mechanical model that rigorously achieves disordered multihyperuniform many-body systems by tuning interactions in binary mixtures of nonadditive hard-disk plasmas. We demonstrate that multihyperuniformity competes with phase separation and stabilizes a clustered phase. Our work provides a systematic means to generate disordered multihyperuniform solids, and hence lays the groundwork to explore their potentially unique photonic, phononic, electronic, and transport properties., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical properties of the hierarchical reference theory: Further investigations

  • Høye, J.S.
  • Lomba, Enrique
The critical region of the hierarchical reference theory (HRT) is investigated further. This extends an earlier work by us where the critical properties of the HRT were concluded indirectly via another accurate but somewhat different theory, the self-consistent Ornstein-Zernike approximation (SCOZA), and numerical work. In the present work we perform our analysis directly upon the HRT partial differential equation to establish ordinary differential equations for the subleading scaling contributions. Again we find that the HRT critical indices in three dimensions are simple rational numbers., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid-solid transitions induced by repulsive interactions revisited

  • Navascués, G.
  • Velasco, E.
  • Mederos, Luis
We revisit a problem already studied 15 years ago by us in collaboration with Stell and Hemmer: the isostructural solid–solid transitions induced by repulsive particle interactions exhibited by classical systems interacting via the Stell–Hemmer potentials. The full phase diagram in the crystal region is obtained by applying a perturbation theory for classical solids used during our collaboration with Stell. Also, the performance of such a theory is now tested by comparing the perturbative phase diagram with that obtained from computer simulations. The latter was calculated using a recently refined method to obtain the free-energy of crystals by means of Monte Carlo simulations. The perturbation theory captures the correct topology and correctly identifies the stable, fcc and bcc, phases. In addition, the theory predicts the occurrence of special points: a point where the two stable structures coexist at the same density, and two critical points terminating the corresponding isostructural phase transitions for fcc and bcc phases. The location of some of these features in the phase diagram is predicted almost quantitatively. However, phase boundaries involving the non-compact bcc phase are much less accurate, a problem that can be traced to the poor representation used for the bcc phase of the reference, hard-sphere, system., We acknowledge financial support from MINECO (Spain) under grants FIS2013-47350-C5-1-R and FIS2013-47350-C5-4-R., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of Short-Chain Alcohol and Alcohol–Water Adsorption in MEL and MFI Zeolites

  • Gómez-Álvarez, Paula
  • Noya, Eva G.
  • Lomba, Enrique
  • Valencia, Susana
  • Pires, João
12 pages, 9 figures, 2 tables, In this paper, we present a comparative study of the adsorption behavior of short chain alcohols (pure and in aqueous solution) into silicalite-1 (MFI-type zeolite) and silicalite-2 (MEL-type zeolite). For quite some time, silicalite-1 has been the reference material to address the problem of adsorptive-based separation, mostly for hydrocarbon mixtures. Interestingly, being structurally close to silicalite-1, adsorption studies using silicalite-2 are scarce and to the best of our knowledge, a comparative study of their behavior for alcohol−water mixtures has not been published to date. We have here resorted to molecular simulation techniques to analyze the adsorption and diffusion phenomena in both zeolites at 25 and 50 °C for pure methanol, ethanol, 1-butanol, and water, and for some relevant compositions of alcohol/water mixtures. In addition to the dilute regime in the mixture, our study ranges from intermediate alcohol concentrations to alcohol-rich phases, relevant to alcohol purification processes. Besides, we have performed volumetric and calorimetric measurements of single-component adsorption of alcohols in pure silica MEL zeolite, which were used to validate the model potentials used in the simulations. We observe that the zigzag channels of MFI zeolite are most likely responsible for its somewhat higher affinity for alcohols. This leads to higher adsorption selectivities when compared to those of MEL zeolite. We have also found that the choice of water model strongly conditions water coadsorption into the zeolites and subsequently the predictions of the adsorbent’s selectivity in alcohol/water systems. Despite considerable differences for adsorbed pure components, diffusivities of alcohol and water adsorbed from mixtures are relatively similar, as a consequence of the strong hydrogen bonds between hydroxyl groups and water., E.L. and E.G.N. acknowledge the support from the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under grants No. FIS2017-89361-C3-2-P and FIS2013-47350-C5-4-R. S.V. thanks J.A. Vidal-Moya for collecting the NMR data and acknowledges financial support from Spanish government (grants MAT2015-71842-P and SEV-2016-0683). J.P. thanks Fundação para a Ciência e a Tecnologia (FCT) for funding the project UID/MULTI/ 00612/2013 (C.Q.B.)., Peer reviewed