Pasar al contenido principal

Biomass catalytic conversion into fuels and platform chemicals

FJCI-2016-30847

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a sustainable bio-fuels production from lignocellulosic bio-oils: Influence of operating conditions on the hydrodeoxygenation of guaiacol over a Mo2C/CNF catalyst

  • Remón, Javier
  • Ochoa, Elba
  • Foguet, Carlos
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
5 Figuras.- Tablas suplementarias disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work firstly provides a thorough insight into the effects of the operating conditions (catalyst loading, initial H2 pressure temperature, reaction time, H2/guaiacol ratio and liquid reaction volume) on the hydrodeoxygenation (HDO) of guaiacol over a Mo2C/CNF catalyst. Under the operating condition tested, gas and solid formation was negligible and guaiacol was primary converted to different liquid products, including non-deoxygenated (0-oxy), mono-deoxygenated (1-oxy) and fully deoxygenated (2-oxy) compounds, together with high molecular weight soluble oligomers. An increase in the catalyst loading increased the guaiacol conversion and HDO efficiency, augmenting the proportions of HDO products. Among these species, the progressive transformation of 1-oxy compounds into 2-oxy species was kinetically and thermodynamically controlled by the catalyst loading and the amount of H2 dissolved in the liquid medium, respectively. Augmenting the H2 pressure increased the H2 availability in the liquid, which led to increases over time in the guaiacol conversion and HDO efficiency, thus promoting the production of HDO products and facilitating the transformation of guaiacol into fully de-oxygenated products. This increase depended on the reaction volume, with more pronounced variations occurring for a small than for a large volume due to the greater variations occurring in the H2/guaiacol ratio for the former than the latter. The temperature exerted a kinetic promoting effect together with a thermodynamic inhibitory influence, as some of the reactions involved were not thermodynamically favoured at high temperature. Therefore, the detailed analysis included in this work brings novel information on guaiacol HDO, which can help to establish the basis for catalysts development and reactors design to achieve a sustainable bio-fuels production from lignocellulosic bio-oils., This work was funded by FEDER and the Spanish Economy and Competitiveness Ministry (MINECO) (ENE2014-52189-C02-01-R and ENE2017-83854-R). Elba Ochoa thanks for the award of her PhD under the frame of the aforementioned project. In addition, Javier Remón Núñez would like to express his gratitude to the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” for the Juan de la Cierva fellowship (FJCI-2016-30847) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis and optimisation of a novel “bio-brewery” approach: Production of bio-fuels and bio-chemicals by microwave-assisted, hydrothermal liquefaction of brewers’ spent grains

  • Lorente, Almudena
  • Remón, Javier
  • Budarin, Vitaliy L.
  • Sánchez-Verdú, Prado
  • Moreno, Andrés
  • Clark, James H.
6 Figuras, 8 Tablas.-- Datos suplementarios disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work firstly explores the feasibility of using a novel microwave-assisted, catalysed, hydrothermal process for the valorisation of brewers’ spent grains (BSGs), examining the effects of the temperature (180–250 °C), pressure (50–130 bar), reaction time (0–2 h) and catalyst amount (Ni-Co/Al-Mg, 0–0.25 g cat/g biomass). This route turned out to be a very promising approach for the production of bio-fuels (bio-oil and bio-char) and platform chemicals (sugar rich aqueous solutions) in a single unit, helping the development of an innovative bio-refinery around BSGs. The overall conversion and the yields to gas, aqueous fraction and bio-oil varied by 31–68%, 10–33%, 9–48% and 4–14%, respectively. The bio-oil was made up a complex mixture of phenols (0–26%), ketones (0–80%), aldehydes (0–57%), carboxylic acids (0–18%) and nitrogen compounds (0–76%). The proportions of C, H, N and O in the bio-oil varied as follow: 15–61 wt%, 5–10 wt%, 1–6 wt% and 26–77 wt%, respectively, which shifted its higher heating value (HHV) between 9 and 27 MJ/kg. The liquid fraction comprised a mixture of DP > 6 oligosaccharides (67–98 C-wt.%), DP2-6 oligosaccharides (0–10 C-wt.%), saccharides (0.2–7 C-wt.%), carboxylic acids (0–7 C-wt.%) and furans (0–27 C-wt.%). The spent solid after the experiments resembled an energetic like bio-char product, whose proportions of C, H, O and N varied by 35–72 wt%, 4–8 wt%, 1–4 wt% and 18–57 wt% and its HHV shifted between 9 and 32 MJ/kg. The optimisation of the process revealed that using a temperature of 250 °C and a pressure of 125 bar for 2 h, it is possible to convert the original material into high-energy biofuels: (8%) bio-oil (26 MJ/kg) and (35%) bio-char (32 MJ/kg); together with a (31%) saccharide-rich (>99 C-wt.%) aqueous solution, thus converting this process into a very promising approach to achieve an environmentally-friendly and integral valorisation of brewers’ spent grains., This research has been funded by the Industrial Biotechnology Catalyst (Innovate UK, BBSRC, EPSRC) to support the translation, development and commercialisation of innovative Industrial Biotechnology processes (EP/N013522/1). EPSRC for research grant number EP/K014773/1. Almudena Lorente Diezma would like to express her gratitude to the University of Castilla La Mancha for the fellowship (2016/11635) awarded to work in a foreign research centre. Javier Remón Núñez would like to express his gratitude to the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” for the Juan de la Cierva fellowship (FJCI-2016-30847) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis and optimisation of a novel ‘almond-refinery’ concept: Simultaneous production of biofuels and value-added chemicals by hydrothermal treatment of almond hulls

  • Remón, Javier
  • Latorre Viu, Javier
  • Matharu, Avtar S.
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 figures, 3 tables.-- Supplementary material available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, For the first time, this work investigates the achievability of developing a biorefinery concept around almond hulls by hydrothermal treatment (HTT), thoroughly scrutinising the influence of the temperature (200–300 °C), pressure (100–180 bar), time (20–180 min) and solid loading (5–25 wt%). This process allowed the conversion of almond hulls into four main products: gas (2–13%), bio-oil (2–12%), aqueous (4–69%) and hydro-char (17–89%). The gas consisted of a mix of H2, CO2, CO and CH4 with a LHV fluctuating from 1 to 13 MJ/m3 STP. The bio-oil comprised a mixture of alkanes, aldehydes, ketones, phenols, furans, benzenes and nitrogen compounds with a HHV between 21 and 31 MJ/kg. The solid product resembled an energetic hydro-char material (HHV 21–31 MJ/kg), while the aqueous effluent comprised a mixture of value-added chemicals, including saccharides and small oxygenated compounds. The production of biofuels can be maximised at 256 °C and 100 bar, using a 5 wt% solid loading for 157 min, conditions at which 43% of the original feedstock can be converted into an elevated energy-filled bio-oil (11% yield, 30 MJ/kg), along with a high energetic hydro-char (32% yield, 29 MJ/kg). Regarding value-added chemicals, up to 10% of the almond hulls can be converted into a bio-oil with a high proportion (45%) of phenolic species at 250 °C and 144 bar with a solid loading of 5 wt% for 167 min. In comparison, a sugar-rich (81 C-wt%) solution can be produced in high yield (54%), by treating a 24 wt% suspension at 252 °C and 180 bar for 153 min. Therefore, the versatility, novelty and intrinsic green and holistic nature of this ‘almond-refinery’ concept exemplify a landmark achievement in future energy and chemicals production from biomass, which might help render the complete bio-refinery for almond hulls more cost-effectively and ecologically feasible., The authors wish to express their gratefulness to FEDER and the Ministerio de Ciencia, Innovación y Universidades (Grant Number ENE2017-83854-R) for providing financial support. Besides, Javier Remón Núñez is very grateful to the Ministerio de Ciencia, Innovación y Universidades for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable production of solid biofuels and biomaterials by microwave-assisted, hydrothermal carbonization (MA-HTC) of Brewers' Spent Grain (BSG)

  • Lorente, Almudena
  • Remón, Javier
  • Salgado-Ramos, M.
  • Huertas Alonso, Alberto J.
  • Sánchez-Verdú, Prado
  • Moreno, Andrés
  • Clark, James H.
7 figures, 2 tables.-- This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Sustainable Chemistry and Engineering, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acssuschemeng.0c06853, This work addresses the management of Brewers’ Spent Grain (BSG) using a state-of-the-art, microwave-assisted, hydrothermal carbonization (MA-HTC) process, for the production of hydrochar, i.e., a renewable solid biomaterial with many industrial applications. For the first time, a detailed relationship has been established between the processing conditions and the properties of the hydrochar via a thorough physicochemical characterization. The experimental results revealed that the temperature (180–250 °C) and reaction time (0–2 h) used in the MA-HTC process exerted a significant influence on the yield and properties of the hydrochar. An increase in these variables (process severity) diminished the hydrochar yield. However, such increments were beneficial to enhance the fuel properties of this product, as the proportions of O and C decreased and increased, respectively. As a result, this process was capable of transforming up to 47% of the original BSG into a high-energy hydrochar with a calorific value of 32 MJ/kg. The characterization of the hydrochar revelated that it was a mesoporous, hydrophilic, rough material, containing several cavities and oxygen functionalities on the surface. These features not only provide the hydrochar with a high aromatic character but also are fundamental for its potential applicability as a bioadsorbent material. An increase in the MA-HTC severity augmented the amounts of aliphatic and aromatic structures in the hydrochar as well as the roughness and the presence of cavities, thus highlighting the excellent flexibility of the process. Therefore, these promising results, together with the energy-efficient and bespoke nature of the MA-HTC process, which substantially reduces the reaction temperature and processing times in comparison to standard carbonization procedures reported to date, represent a step-change not only for the production of biofuels and biomaterials but also for the management of BSG., Consejería de Educación, Cultura y Deporte of Junta de Comunidades de Castilla-La Mancha (Spain) and Ministerio de Ciencia Innovación y Universidades provided financial funding for this work via the projects SBPLY/17/180501/000522 and RTI2018–099503-B-100, respectively; both being co-financed by the Fondo Europeo de Desarrollo Regional (FEDER). Besides, the Industrial Biotechnology Catalyst (Innovate UK, BBSRC, EPSRC) and Biotechnology processes (EP/N013522/1) have also contributed. EPSRC for research grant number EP/K014773/1. In addition, A.L. would like to express her gratitude to the University of Castilla-La Mancha for her predoctoral fellowship (2014/10340) and financial grant to conduct international research (2016/11635) granted. At the same time, J.R. is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva fellowships (FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio Pasquini, F.
  • Pedraza Segura, L.
  • Arcelus-Arrillaga, Pedro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
5 figures, 4 tables, supplementary information.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers., The authors wish to express their gratefulness to FEDER, the Spanish Ministry of Science, Innovation and Universities (Grant Number ENE2017-83854-R) and the Spanish National Research Council (CSIC) (Grant Number COOPA20367) for providing financial support. Besides, Javier Remón is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded. Lorena Pedraza-Segura and Pedro Arcelus-Arrillaga would like to acknowledge the financial support of INIAT and DINV at Universidad Iberoamericana for their research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From unavoidable food waste to advanced biomaterials: microfibrilated lignocellulose production by microwave-assisted hydrothermal treatment of cassava peel and almond hull

  • Sulaeman, Allyn P.
  • Gao, Yang
  • Dugmore, Tom
  • Remón, Javier
  • Matharu, Avtar S.
4 figures.-- Supplementary information available., Lignocellulose based nanomaterials are emerging green biosolids commonly obtained from wood pulp. Alternative feedstocks, such as as unavoidable food waste, are interesting resources for nano/microfibers. This research reports the production and characterization of microfibrillated lignocellulose (MFLC) from cassava peel (CP) and almond hull (AH) via acid-free microwave-assisted hydrothermal treatment (MHT) at different temperatures (120–220 °C). During processing, the structural changes were tracked by ATR-IR, TGA, XRD, 13C CPMAS NMR, zeta potential, HPLC, elemental analysis (CHN; carbon, hydrogen and nitrogen), TEM and SEM analyses. The microwave processing temperature and nature of feedstock exerted a significant influence on the yields and properties of the MFLCs produced. The MFLC yields from CP and AH shifted by 15–49% and 31–73%, respectively. Increasing the MHT temperature substantially affected the crystallinity index (13–66% for CP and 36–62% for AH) and thermal stability (300–374 °C for CP and 300–364 °C for AH) of the MFLCs produced. This suggested that the MFLC from CP is more fragile and brittle than that produced from AH. These phenomena influenced the gelation capabilities of the fibers. AH MFLC pretreated with ethanol at low temperature gave better film-forming capabilities, while untreated and heptane pretreated materials formed stable hydrogels at solid concentration (2% w/v). At high processing temperatures, the microfibrils were separated into elementary fibers, regardless of pretreatment or feedstock type. Given these data, this work demonstrates that the acid-free MHT processing of CP and AH is a facile method for producing MFLC with potential applications, including adsorption, packaging and the production of nanocomposites and personal care rheology modifiers., PS would like to thank Lembaga Pengelola Dana Pendidikan (LPDP) scholarship, Ministry of Finance, Indonesia, for financial support for PhD study under the guidance of ASM. JR would like to express his gratitude to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva fellowships (FJCI-2016-30847 and IJC2018-037110-I) awarded. ASM acknowledges the EPSRC (Whole systems understanding of unavoidable food supply chain wastes for re-nutrition EP/P008771/1) for funding TD for Postdoctoral study., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio-Pasquini, Felipe
  • Pedraza-Segura, Lorena
  • Arcelus-Arrillaga, Pedro
  • Suelves, Isabel
  • Pinilla, José Luis
The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct conversion of almond waste into value-added liquids using carbon-neutral catalysts: Hydrothermal hydrogenation of almond hulls over a Ru/CNF catalyst

  • Remón, Javier
  • Sevilla-Gasca, Raquel
  • Frecha, Esther
  • Pinilla, José Luis
  • Suelves, Isabel
The almond industry leaves behind substantial amounts of by-products, with almond hulls being the primary residue generated. Given that one way to improve food security is by decreasing waste to reduce environmental impacts, developing sustainable processes to manage this by-product is necessary. Herein, we report on the hydrothermal hydrogenation of almond hulls over a carbon-neutral Ru supported on carbon nanofibres (Ru/CNF) catalyst, addressing the temperature, H2 pressure, time and catalyst loading. These variables controlled the distribution of the reaction products: gas (0–5%), liquid (49–82%) and solid (13–51%), and ruled the composition of the liquid effluent. This aqueous fraction comprised oligomers (46–81 wt%), saccharides (2–7 wt%), sugar alcohols (2–15 wt%), polyhydric alcohols (1–8 wt%) and carboxylic acids (7–31 wt%). The temperature and reaction time influenced the extension of hydrolysis, depolymerisation, deamination, hydrolysis, hydrogenation and dehydration reactions. Additionally, the initial H2 pressure and catalyst loading kinetically promoted these transformations, whose extensions were ruled by the amount of H2 effectively dissolved in the reaction medium and the prevalence of hydrogenations over dehydration/decarboxylation reactions or vice versa depending on the catalyst loading. Process optimisation revealed that it is feasible to convert up to 67% of almond hulls into merchantable oligomers at 230 °C, 35 bar initial H2, using 1 g catalyst/g biomass (0.4 g Ru/g biomass) for 360 min. Additionally, decreasing the temperature to 187 °C without modifying the other parameters could convert this material into oligomers (31 wt%) and small oxygenates (17 wt% carboxylic acids, 11 wt% sugar alcohols and 6 wt% polyhydric alcohols) concurrently. The theoretical energy assessment revealed that the total and partial combustion of the spent solid material could provide the required energy for the process and allow catalyst recovery and reutilisation. This environmental friendliness and holistic features exemplify a landmark step-change to valorising unavoidable food waste.