Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis and optimisation of a novel ‘almond-refinery’ concept: Simultaneous production of biofuels and value-added chemicals by hydrothermal treatment of almond hulls

  • Remón, Javier
  • Latorre Viu, Javier
  • Matharu, Avtar S.
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
13 figures, 3 tables.-- Supplementary material available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, For the first time, this work investigates the achievability of developing a biorefinery concept around almond hulls by hydrothermal treatment (HTT), thoroughly scrutinising the influence of the temperature (200–300 °C), pressure (100–180 bar), time (20–180 min) and solid loading (5–25 wt%). This process allowed the conversion of almond hulls into four main products: gas (2–13%), bio-oil (2–12%), aqueous (4–69%) and hydro-char (17–89%). The gas consisted of a mix of H2, CO2, CO and CH4 with a LHV fluctuating from 1 to 13 MJ/m3 STP. The bio-oil comprised a mixture of alkanes, aldehydes, ketones, phenols, furans, benzenes and nitrogen compounds with a HHV between 21 and 31 MJ/kg. The solid product resembled an energetic hydro-char material (HHV 21–31 MJ/kg), while the aqueous effluent comprised a mixture of value-added chemicals, including saccharides and small oxygenated compounds. The production of biofuels can be maximised at 256 °C and 100 bar, using a 5 wt% solid loading for 157 min, conditions at which 43% of the original feedstock can be converted into an elevated energy-filled bio-oil (11% yield, 30 MJ/kg), along with a high energetic hydro-char (32% yield, 29 MJ/kg). Regarding value-added chemicals, up to 10% of the almond hulls can be converted into a bio-oil with a high proportion (45%) of phenolic species at 250 °C and 144 bar with a solid loading of 5 wt% for 167 min. In comparison, a sugar-rich (81 C-wt%) solution can be produced in high yield (54%), by treating a 24 wt% suspension at 252 °C and 180 bar for 153 min. Therefore, the versatility, novelty and intrinsic green and holistic nature of this ‘almond-refinery’ concept exemplify a landmark achievement in future energy and chemicals production from biomass, which might help render the complete bio-refinery for almond hulls more cost-effectively and ecologically feasible., The authors wish to express their gratefulness to FEDER and the Ministerio de Ciencia, Innovación y Universidades (Grant Number ENE2017-83854-R) for providing financial support. Besides, Javier Remón Núñez is very grateful to the Ministerio de Ciencia, Innovación y Universidades for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable production of solid biofuels and biomaterials by microwave-assisted, hydrothermal carbonization (MA-HTC) of Brewers' Spent Grain (BSG)

  • Lorente, Almudena
  • Remón, Javier
  • Salgado-Ramos, M.
  • Huertas Alonso, Alberto J.
  • Sánchez-Verdú, Prado
  • Moreno, Andrés
  • Clark, James H.
7 figures, 2 tables.-- This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Sustainable Chemistry and Engineering, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acssuschemeng.0c06853, This work addresses the management of Brewers’ Spent Grain (BSG) using a state-of-the-art, microwave-assisted, hydrothermal carbonization (MA-HTC) process, for the production of hydrochar, i.e., a renewable solid biomaterial with many industrial applications. For the first time, a detailed relationship has been established between the processing conditions and the properties of the hydrochar via a thorough physicochemical characterization. The experimental results revealed that the temperature (180–250 °C) and reaction time (0–2 h) used in the MA-HTC process exerted a significant influence on the yield and properties of the hydrochar. An increase in these variables (process severity) diminished the hydrochar yield. However, such increments were beneficial to enhance the fuel properties of this product, as the proportions of O and C decreased and increased, respectively. As a result, this process was capable of transforming up to 47% of the original BSG into a high-energy hydrochar with a calorific value of 32 MJ/kg. The characterization of the hydrochar revelated that it was a mesoporous, hydrophilic, rough material, containing several cavities and oxygen functionalities on the surface. These features not only provide the hydrochar with a high aromatic character but also are fundamental for its potential applicability as a bioadsorbent material. An increase in the MA-HTC severity augmented the amounts of aliphatic and aromatic structures in the hydrochar as well as the roughness and the presence of cavities, thus highlighting the excellent flexibility of the process. Therefore, these promising results, together with the energy-efficient and bespoke nature of the MA-HTC process, which substantially reduces the reaction temperature and processing times in comparison to standard carbonization procedures reported to date, represent a step-change not only for the production of biofuels and biomaterials but also for the management of BSG., Consejería de Educación, Cultura y Deporte of Junta de Comunidades de Castilla-La Mancha (Spain) and Ministerio de Ciencia Innovación y Universidades provided financial funding for this work via the projects SBPLY/17/180501/000522 and RTI2018–099503-B-100, respectively; both being co-financed by the Fondo Europeo de Desarrollo Regional (FEDER). Besides, the Industrial Biotechnology Catalyst (Innovate UK, BBSRC, EPSRC) and Biotechnology processes (EP/N013522/1) have also contributed. EPSRC for research grant number EP/K014773/1. In addition, A.L. would like to express her gratitude to the University of Castilla-La Mancha for her predoctoral fellowship (2014/10340) and financial grant to conduct international research (2016/11635) granted. At the same time, J.R. is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva fellowships (FJCI-2016-30847 and IJC2018-037110-I) awarded., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio Pasquini, F.
  • Pedraza Segura, L.
  • Arcelus-Arrillaga, Pedro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
5 figures, 4 tables, supplementary information.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers., The authors wish to express their gratefulness to FEDER, the Spanish Ministry of Science, Innovation and Universities (Grant Number ENE2017-83854-R) and the Spanish National Research Council (CSIC) (Grant Number COOPA20367) for providing financial support. Besides, Javier Remón is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowships (Grant Numbers FJCI-2016-30847 and IJC2018-037110-I) awarded. Lorena Pedraza-Segura and Pedro Arcelus-Arrillaga would like to acknowledge the financial support of INIAT and DINV at Universidad Iberoamericana for their research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the development of chrome-free tanning agents: an advanced Trojan horse strategy using ‘Al-Zr-oligosaccharides’ produced by the depolymerization and oxidation of biomass

  • Jiang, Zhicheng
  • Gao, Mi
  • Remón, Javier
  • Ding, Wei
  • Hu, Changwei
  • Shi, Bi
8 figures, 3 tables.-- The article appears on the magazine cover., This work addresses the manufacturing of a pioneering chrome-free tanning agent, consisting of ‘Al–Zr-oligosaccharides’ produced from biomass. First, a microwave-assisted AlCl3–H2O2–H2O reaction system was used for the simultaneous degradation and oxidation of hemicellulose in corncob. The obtained aqueous solution containing ‘Al-oligosaccharides’ was then combined with Zr to produce water-soluble ‘Al–Zr-oligosaccharides’. These species behaved as a ‘Trojan horse’, allowing the uniform and controlled penetration of Al and Zr into the leather, avoiding their accumulation on the surface. The effects of the reaction temperature and the AlCl3 and H2O2 concentrations used during the synthesis were systematically analyzed. Increases in the temperature and AlCl3 concentration improved the hemicellulose conversion, while the use of high H2O2 concentrations augmented the amounts of –CHO/–COOH functionalities in the oligosaccharides, with both phenomena being paramount for the efficient formation of ‘Al–Zr-oligosaccharides’. However, more severe reaction conditions led to the formation of an undesirable species, negatively influencing the tanning performance and chromaticity of the tanning agent. Given this, these parameters were optimized, and it was found that it is possible to convert up to 72 wt% of the hemicellulose present in corncob into an ‘advanced Trojan horse tanning agent’ contained in a colorless water solution, conducting the synthesis at 129 °C with a solvent comprising 56 mM AlCl3 and 2.6 vol% H2O2. The application of this solution for leather tanning provided leather with a shrinkage temperature as high as 87 °C, thus meeting the restrictive requirements of the leather industry. Therefore, these results are a landmark achievement in this field and represent a step forward to a sustainable and renewable leather industry., This work is financially supported by the National Natural Science Foundation of China (22078211), the China Postdoctoral Science Foundation (2019M663489), the Sichuan Science and Technology Program (2020YJ0023) and the Fundamental Research Funds for the Central Universities (2019SCU12059). We appreciate Hui Wang from the Analytical & Testing Center of Sichuan University for help with SEM characterization. We also thank Dr Xiu He at the College of Biomass Science and Engineering, Sichuan University, for experimental assistance. Besides, Javier Remón is very grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowship (IJC2018-037110-I) awarded. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-assisted hydrothermal treatments for biomass valorisation: A critical review

  • Gao, Yang
  • Remón, Javier
  • Matharu, Avtar S.
5 figures, 8 tables., The sustainable conversion of biomass into biofuels, chemicals and biomaterials has gained increasing attention to ensure the well-being of present and future generations. Among the different technologies available to date for the valorisation biomass, microwave-assisted hydrothermal conversion has recently appeared as a stat-in-the-art technology, capable of furnishing a wide range of reaction products for the energy, pharmaceutical and chemistry sectors. This emerging technology combines the inherent benefits of microwave heating and the sustainable features of biomass hydrothermal valorisation. Herein, for the first time, this critical review summarises and analyses all the work conducted to date on the use microwave-assisted hydrothermal processes (including microwave-assisted carbonisation, liquefaction and treatment/hydrolysis) for the conversion of biomass into hydrochar, bio-crude (bio-oil) and valuable chemicals. In particular, this work has put together vital information addressing the influences of the reaction conditions (temperature, time, amount and type of catalyst, biomass loading and type, and microwave power) on the yields and key properties of the reaction products. The relationships between these processing parameters and the chemical transformations involved in the processes (hydrolysis, dehydration, decarboxylation, condensation, and re-polymerisation) have been described in detail, and reliable comparisons have also been established between microwave-assisted and conventional hydrothermal technologies when data were available. As a result, this critical review collects essential information on the use of this cutting-edge, recently appeared, microwave-assisted hydrothermal technology, and paves the way for its expansion and future development and commercialisation., Javier Remón would like to express his gratitude to the Spanish “Ministerio de Ciencia, Innovación y Universidades” for his Juan de la Cierva Felloship awarded (IJC2018-037110-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From unavoidable food waste to advanced biomaterials: microfibrilated lignocellulose production by microwave-assisted hydrothermal treatment of cassava peel and almond hull

  • Sulaeman, Allyn P.
  • Gao, Yang
  • Dugmore, Tom
  • Remón, Javier
  • Matharu, Avtar S.
4 figures.-- Supplementary information available., Lignocellulose based nanomaterials are emerging green biosolids commonly obtained from wood pulp. Alternative feedstocks, such as as unavoidable food waste, are interesting resources for nano/microfibers. This research reports the production and characterization of microfibrillated lignocellulose (MFLC) from cassava peel (CP) and almond hull (AH) via acid-free microwave-assisted hydrothermal treatment (MHT) at different temperatures (120–220 °C). During processing, the structural changes were tracked by ATR-IR, TGA, XRD, 13C CPMAS NMR, zeta potential, HPLC, elemental analysis (CHN; carbon, hydrogen and nitrogen), TEM and SEM analyses. The microwave processing temperature and nature of feedstock exerted a significant influence on the yields and properties of the MFLCs produced. The MFLC yields from CP and AH shifted by 15–49% and 31–73%, respectively. Increasing the MHT temperature substantially affected the crystallinity index (13–66% for CP and 36–62% for AH) and thermal stability (300–374 °C for CP and 300–364 °C for AH) of the MFLCs produced. This suggested that the MFLC from CP is more fragile and brittle than that produced from AH. These phenomena influenced the gelation capabilities of the fibers. AH MFLC pretreated with ethanol at low temperature gave better film-forming capabilities, while untreated and heptane pretreated materials formed stable hydrogels at solid concentration (2% w/v). At high processing temperatures, the microfibrils were separated into elementary fibers, regardless of pretreatment or feedstock type. Given these data, this work demonstrates that the acid-free MHT processing of CP and AH is a facile method for producing MFLC with potential applications, including adsorption, packaging and the production of nanocomposites and personal care rheology modifiers., PS would like to thank Lembaga Pengelola Dana Pendidikan (LPDP) scholarship, Ministry of Finance, Indonesia, for financial support for PhD study under the guidance of ASM. JR would like to express his gratitude to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva fellowships (FJCI-2016-30847 and IJC2018-037110-I) awarded. ASM acknowledges the EPSRC (Whole systems understanding of unavoidable food supply chain wastes for re-nutrition EP/P008771/1) for funding TD for Postdoctoral study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel ‘sea-thermal’, synergistic co-valorisation approach for biofuels production from unavoidable food waste (almond hulls) and plastic residues (disposable face masks)

  • Remón, Javier
  • Oriol, Luis
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
6 figures, 5 tables., This work first-time addresses the synergetic hydrothermal co-valorisation of almond hulls (an unavoidable food waste) and FFP2 face masks (a common plastic material) using seawater (a sustainable reaction medium). The effects of the feedstock composition (each material alone and all possible binary combinations) and the reaction medium (deionised water, seawater and all possible binary mixtures) have been evaluated at 350 °C and 170 bar over a wide range of reaction times (20–180 min). Bilateral biomass-plastic synergistic and antagonistic interactions between both feedstocks, combined with several promoting and inhibiting effects displayed by seawater, ruled the distribution of the reaction products and their most important physicochemical and fuel properties. Process optimisation revealed that the formation of an energy-dense (32 MJ/kg) liquid biofuel was maximised (26% biocrude yield) by conducting the process with almond hulls in deionised water for 115 min. At the same time, face masks promoted solid biofuel formation (83% hydrochar yield, 46 MJ/kg) by coprocessing an almond hulls/disposable face masks mixture (8:92 wt%) in salted (seawater/deionised water mixture with 37471 ppm salinity) water for 180 min. Conducting the process with seawater (44608 ppm salinity) for 180 min allowed coprocessing of both materials (22/78 wt% almond hulls/face masks) efficiently to maximise biofuels production (13% biocrude yield, HHV = 33 MJ/kg and 67% hydrochar yield, HHV = 49 MJ/kg). These results are a breakthrough in developing season-free and flexible biorefineries, which contribute to reducing pollution and bringing out the hidden value of human activity common residues., This work was funded by FEDER and the Spanish Ministry of Science, Innovation and Universities (ENE 2017-83854-R) and MCIN/AEI/10.13039/501100011033 (I+D+i project PID2020-115053RB-I00). Javier Remón is grateful to the Spanish Ministry of Science, Innovation and Universities for the Juan de la Cierva (JdC) fellowship (IJC2018-037110-I) awarded., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design of highly active Ni catalysts supported on carbon nanofibers for the hydrolytic hydrogenation of cellobiose

  • Frecha, Esther
  • Remón, Javier
  • Torres, Daniel
  • Suelves, Isabel
  • Pinilla, José Luis
The direct transformation of cellulose into sugar alcohols (one-pot conversion) over supported nickel catalysts represents an attractive chemical route for biomass valorization, allowing the use of subcritical water in the hydrolysis step. The effectiveness of this process is substantially conditioned by the hydrogenation ability of the catalyst, determined by design parameters such as the active phase loading and particle size. Herein, mechanistic insights into catalyst design to produce superior activity were outlined using the hydrolytic hydrogenation of cellobiose as a model reaction. Variations in the impregnation technique (precipitation in basic media, incipient wetness impregnation, and the use of colloidal-deposition approaches) endowed carbon-nanofiber-supported catalysts within a wide range of Ni crystal sizes (5.8–20.4 nm) and loadings (5–14 wt%). The link between the properties of these catalysts and their reactivity has been established using characterization techniques such as X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma-optical emission spectroscopy (ICP-OES). A fair compromise was found between the Ni surface area (3.89 m2/g) and its resistance against oxidation for intermediate crystallite sizes (∼11.3 nm) loaded at 10.7 wt%, affording the hydrogenation of 81.2% cellobiose to sorbitol after 3 h reaction at 190°C and 4.0 MPa H2 (measured at room temperature). The facile oxidation of smaller Ni particle sizes impeded the use of highly dispersed catalysts to reduce the metal content requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A novel ‘sea-thermal’, synergistic co-valorisation approach for biofuels production from unavoidable food waste (almond hulls) and plastic residues (disposable face masks)

  • Remón, Javier
  • Zapata, Gonzalo
  • Oriol, Luis
  • Pinilla, José Luis
  • Suelves, Isabel
This work first-time addresses the synergetic hydrothermal co-valorisation of almond hulls (an unavoidable food waste) and FFP2 face masks (a common plastic material) using seawater (a sustainable reaction medium). The effects of the feedstock composition (each material alone and all possible binary combinations) and the reaction medium (deionised water, seawater and all possible binary mixtures) have been evaluated at 350 °C and 170 bar over a wide range of reaction times (20–180 min). Bilateral biomass-plastic synergistic and antagonistic interactions between both feedstocks, combined with several promoting and inhibiting effects displayed by seawater, ruled the distribution of the reaction products and their most important physicochemical and fuel properties. Process optimisation revealed that the formation of an energy-dense (32 MJ/kg) liquid biofuel was maximised (26% biocrude yield) by conducting the process with almond hulls in deionised water for 115 min. At the same time, face masks promoted solid biofuel formation (83% hydrochar yield, 46 MJ/kg) by coprocessing an almond hulls/disposable face masks mixture (8:92 wt%) in salted (seawater/deionised water mixture with 37471 ppm salinity) water for 180 min. Conducting the process with seawater (44608 ppm salinity) for 180 min allowed coprocessing of both materials (22/78 wt% almond hulls/face masks) efficiently to maximise biofuels production (13% biocrude yield, HHV = 33 MJ/kg and 67% hydrochar yield, HHV = 49 MJ/kg). These results are a breakthrough in developing season-free and flexible biorefineries, which contribute to reducing pollution and bringing out the hidden value of human activity common residues.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Catalytic hydrolysis of cellulose to glucose: on the influence of graphene oxide morphology under microwave radiation

  • Frecha, E.
  • Torres, D.
  • Remón, J.
  • Gammons, R.
  • Matharu, A.S.
  • Suelves, I.
  • Pinilla, J.L.
Carbon nanostructures provide a unique platform for the synthesis of novel catalysts for biomass conversion. In this work, a set of graphene oxide (GO)-based materials (nanofibers (GONF), sheets of few-layers (FLGO), and quantum dots (GOQD)), differing structurally in morphology and size, was prepared from fishbone-carbon nanofibers (CNF) and their catalytic behavior was compared on the hydrolysis of amorphous cellulose under microwave (MW) radiation. First, the influence of the reaction temperature (135–180 ºC), holding time (0–120 min), catalyst morphology and cellulose/water ratio (0.25–2.0 wt%) was thoroughly screened and compared with conventional heating mode. The use of GO morphologies in concert with MW energy showed the potential to achieve similar kinetic profiles than previously reported sulfonated carbons (110 kJ/mol) but using considerably less amount of catalyst (cellulose-to-catalyst ratio 12-fold lower). Overall, the reactivity of the GO-catalyst was related to their degree of oxidation/exfoliation, decreasing as follows: GOQD > FLGO > GONF. Compared with conventional heating, MW-technology enabled higher loadings of cellulose (2.0 vs. 0.25 wt%) to be processed in a shorter time (20 min instead of 24 h), which is a landmark achievement toward process intensification.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimisation of the processing conditions of hydrolytic hydrogenation of cellulose using carbon nanofiber supported Ni catalysts

  • Frecha, E.
  • Remón, J.
  • Torres, D.
  • Suelves, I.
  • Pinilla, J.L.
The synthesis of sorbitol from cellulose over Ni catalysts is a promising valorisation route in the biorefinery scenario, applying relatively simple preparation methods and earth-abundant metals. The overall selectivity, however, depends on the kinetic control of a complex reaction network, involving the hydrolysis of cellulose to monosaccharides via cello-oligomers, glucose hydrogenation into sorbitol and hydrogenolysis side-reactions of sugars and sorbitol to low molecular weight polyols. Therein, subtle changes in the catalyst composition and process conditions might have a strong impact on the final product distribution. Driven by these challenges, this work first-time provides novel insights into the hydrothermal hydrogenation of cellulose over a carbon nanofibre supported Ni catalyst (Ni/CNF). Firstly, the impact of the duration of a ball-milling pre-treatment step and the influences of the hydrothermal time and temperature were thoroughly analysed. The experimental results obtained highlighted the importance of process control to promote the first transformation of cellulose to glucose and its subsequent hydrogenation to sorbitol to minimise the extension of side reactions. Finally, an additional study was conducted to palliate the recalcitrant nature of cellulose by decreasing mass transfer limitations to a minimum extent. This was achieved by including an additional mix-milling of the amorphous cellulose produced in the first pre-treatment with the catalyst and increasing the H2 pressure of the hydrothermal hydrogenation process. This allowed attaining a sorbitol yield as high as 62% at 190 ºC using an initial H2 pressure of 8 MPa for 26 h, which is one of the best results reported in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Catalytic valorisation of the effluents generated during the defibrillation process of cellulose from almond hulls: A holistic zero-waste biorefinery approach

  • Frecha, E.
  • Remón, J.
  • Sulaeman, A.P.
  • Matharu, A.S.
  • Suelves, I.
  • Pinilla, J.L.
The acid-free hydrothermal microwave–assisted selective scissoring (Hymass concept) of cellulosic substrates is gaining keen interest in the field of materials science. Besides, implementing catalytic methodologies to upgrade side streams produced during this process could contribute to better, holistic utilisation of the starting feedstock. This work depicts a zero-waste biorefinery concept based on cellulose defibrillation from almond hulls using various hydrotreatment technologies (hydrogenation and hydrodeoxygenation) for downstream processing on a ruthenium catalyst. Therein, the hemicellulose separated from the biomass preconditioning step was converted into sugar alcohols and/or marketable polyols with a relatively high yield (47.4%) by hydrolytic hydrogenation (437 K, 3h, 5.0 MPa H2). Meanwhile, a family of bioactive compounds (3-hydroxypyridines) could be directly extracted from the hydrolysate stream derived from microwave digestion, along with an energy carrier that was chemically stabilised (503 K, 60 min, 4.0 MPa H2) to obtain fuel additives (diethyl succinic acid, DES) and/or fuel intermediates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Caffeinating the biofuels market: Effect of the processing conditions during the production of biofuels and high-value chemicals by hydrothermal treatment of residual coffee pulp

  • Remón, Javier
  • Ravaglio-Pasquini, Felipe
  • Pedraza-Segura, Lorena
  • Arcelus-Arrillaga, Pedro
  • Suelves, Isabel
  • Pinilla, José Luis
The manufacturing of coffee, one of the most popular beverages globally, renders enormous amounts of by-products and wastes, which may trigger severe environmental issues if not treated appropriately. The coffee pulp, resulting from the wet processing of coffee, is the predominant by-product, with around 10 Mt annually produced worldwide. For the first time, this work addresses the hydrothermal treatment of coffee pulp to produce biofuels and platform molecules, scrutinising the influence of the processing conditions (temperature, pressure, reaction time and solid/water ratio) on the process. This strategy allowed the transformation of coffee pulp into bio-crude and hydrochar in different yields (10–26% and 10–42%, respectively), depending on the conditions. The bio-crude included a pool of alkanes, carboxylic acids, ketones, phenols and nitrogen species, with varying quantities of C (54–71 wt%), H (6–7 wt%), O (18–34 wt%) and N (3–5 wt%) and a calorific value shifting from 23 to 32 MJ/kg. The hydrochar contained different proportions of C (57–72 wt%), H (4–6 wt%), O (20–35 wt%) and N (2–3 wt%) and had a calorific value between 22 and 29 MJ/kg. Process optimisation showed that up to 45% of the coffee pulp could be simultaneously converted into energy-rich (29 MJ/kg), merchantable liquid (20% bio-crude) and solid (24% hydrochar) biofuels during the treatment of a 15 wt% coffee pulp suspension at 320 °C and 162 bar for 1 h. At the same time, a bio-crude with a high proportion of profitable phenolic derivatives (42%) can be attained in high yield (25%) when a 5 wt% suspension is treated at 280 °C and 120 bar for 2 h. These promising results, along with the bespoke nature of this hydrothermal treatment, are a landmark achievement for the economy and sustainability of coffee producer countries, thus representing a pioneering step change towards the sustainable management of early-stage coffee leftovers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Direct conversion of almond waste into value-added liquids using carbon-neutral catalysts: Hydrothermal hydrogenation of almond hulls over a Ru/CNF catalyst

  • Remón, Javier
  • Sevilla-Gasca, Raquel
  • Frecha, Esther
  • Pinilla, José Luis
  • Suelves, Isabel
The almond industry leaves behind substantial amounts of by-products, with almond hulls being the primary residue generated. Given that one way to improve food security is by decreasing waste to reduce environmental impacts, developing sustainable processes to manage this by-product is necessary. Herein, we report on the hydrothermal hydrogenation of almond hulls over a carbon-neutral Ru supported on carbon nanofibres (Ru/CNF) catalyst, addressing the temperature, H2 pressure, time and catalyst loading. These variables controlled the distribution of the reaction products: gas (0–5%), liquid (49–82%) and solid (13–51%), and ruled the composition of the liquid effluent. This aqueous fraction comprised oligomers (46–81 wt%), saccharides (2–7 wt%), sugar alcohols (2–15 wt%), polyhydric alcohols (1–8 wt%) and carboxylic acids (7–31 wt%). The temperature and reaction time influenced the extension of hydrolysis, depolymerisation, deamination, hydrolysis, hydrogenation and dehydration reactions. Additionally, the initial H2 pressure and catalyst loading kinetically promoted these transformations, whose extensions were ruled by the amount of H2 effectively dissolved in the reaction medium and the prevalence of hydrogenations over dehydration/decarboxylation reactions or vice versa depending on the catalyst loading. Process optimisation revealed that it is feasible to convert up to 67% of almond hulls into merchantable oligomers at 230 °C, 35 bar initial H2, using 1 g catalyst/g biomass (0.4 g Ru/g biomass) for 360 min. Additionally, decreasing the temperature to 187 °C without modifying the other parameters could convert this material into oligomers (31 wt%) and small oxygenates (17 wt% carboxylic acids, 11 wt% sugar alcohols and 6 wt% polyhydric alcohols) concurrently. The theoretical energy assessment revealed that the total and partial combustion of the spent solid material could provide the required energy for the process and allow catalyst recovery and reutilisation. This environmental friendliness and holistic features exemplify a landmark step-change to valorising unavoidable food waste.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ginger waste as a potential feedstock for a zero-waste ginger biorefinery: a review

  • Inthalaeng, Natthamon
  • Gao, Yang
  • Remón, Javier
  • Dugmore, Thomas I. J.
  • Ozel, Mustafa Z.
  • Sulaeman, Allyn
  • Matharu, Avtar S.
Ginger consumption and its use in industrial applications such as essential oil and oleoresin extraction are growing globally. There will be increased volumes of ginger waste (rhizomes, stems and leaves) in the coming years. However, the valorisation of ginger waste is limited in the literature beyond its use as a ginger meal for animal feed. Herein, this review consolidates the literature on ginger waste within the context of developing a zero-waste ginger biorefinery that yields chemicals, materials and (bio)energy for emerging bio-based markets and applications. Green extraction technologies are reported; some are at an industrial scale for processing fresh ginger which could be re-used to obtain a second crop of oil or oleoresin. The application of ginger waste to produce potential value-added products such as anti-microbial materials, environmental remediation agents, supercapacitors, bioenergy and heterogeneous catalysts is presented. Limitations based on logistics, feedstock, processing technology and final output are discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly selective catalytic hydrodeoxygenation of guaiacol to benzene in continuous operation mode

  • Gracia, J.
  • Ayala-Cortés, A.
  • Di Stasi, C.
  • Remón, J.
  • Torres, D.
  • Pinilla, J.L.
  • Suelves, I.
Benzene, mostly produced from fossil fuel sources, is an essential chemical to many modern industries. Alternatively to non-renewable methods currently used, the present work explores using fast pyrolysis biomass-derived bio-oils to furnish this valuable platform molecule. Notably, we report for the first time the impact of different operational parameters on the highly selective continuous catalytic hydrodeoxygenation of guaiacol, a bio-oil model compound, into benzene using a Mo2C/CNF-based catalyst. The parametric study includes a first evaluation of the effect of the hydrogen pressure (25, 50 and 75 bar), temperature (300, 325 and 350 °C) and weight hourly space velocity (4 and 10 gorg gcat−1 h−1) on the guaiacol conversion and product distribution, and a subsequent long-term evaluation (30 h on stream) of the catalyst under appropriate processing conditions The experimental results revelated that our Mo2C/CNF was able to achieve a conversion of 90–98% with a relative amount of benzene in the liquid product up to 81% for at least 30 h without any sign of deactivation at 75 bar of H2 and 350 °C, which is a landmark achievement in the conversion of bio-oil derived molecules into platform chemicals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An innovative ‘sea-thermal’ synergetic biorefinery for biofuel production: Co-valorization of lignocellulosic and algal biomasses using seawater under hydrothermal conditions

  • Zhou, Yingdong
  • Remón, Javier
  • Ding, Wei
  • Jiang, Zhicheng
  • Pinilla, José Luis
  • Hu, Changwei
  • Suelves, Isabel
This study explores the co-hydrothermal treatment (co-HTT) of almond hulls and Chlorella Vulgaris using seawater as an alternative HTT medium. The influence of the feedstock (individual biomass and all the possible binary mixtures) was systematically evaluated under different conditions (reaction temperatures and times). The feedstock mixture and hydrothermal conditions significantly influenced the overall product distribution: gas (1–5%), hydrochar (6–56%), biocrude (6–55%), and aqueous fraction (33–52%), along with the most representative physicochemical and fuel properties of these products. Notably, the biocrude had a calorific value of 24–31 MJ/kg, whereas the hydrochar shifted between 3 and 26 MJ/kg. The degradation of abundant polysaccharides in almond hulls produced acidic species, promoting the degradation of proteins to N-containing species in biocrude. The synergies between microalgae and almond hulls favored the deamination of amino acid and repolymerization of formed monomers. Process optimization revealed that the best biocrude production (59% yield and HHV = 28 MJ/kg) was obtained by treating C. Vulgaris at 268 °C for 180 min. Contrarily, the HTT of almond hulls under optimum processing conditions (300 °C and 112 min) also produced an energy-dense biocrude (29 MJ/kg) but with a much lesser yield (16%). However, such a low biocrude production can be synergistically increased up to 33 %, maintaining the HHV (31 MJ/kg), including up to 61 wt% of C.Vulgaris into the feedstock, with a feedstock energy recovery of 75%. Holistically, the co-HTT of 40 wt% C. Vulgaris and 60 wt% almond hulls at 300 °C for 180 min produced energy-dense liquid (23% yield and HHV = 32 MJ/kg) and solid (29% yield and HHV = 25 MJ/kg) biofuels simultaneously, with a feedstock energy recovery of 80%. Given these excellent prospects, this strategy provides timely and new insights into developing synergetic strategies to utilize microalgal and lignocellulosic biomasses more efficiently, paving the way toward developing holistic and unseasonal biorefinery processes.