Pasar al contenido principal

PARTICIPACION DE CNM EN EL EXPERIMENTO ATLAS EN EL LHC: ACTUALIZACION DEL DETECTOR

FPA2015-69260-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of gain homogeneity and radiation effects of Low Gain Avalanche Pad Detectors

  • Gallrapp, Christian
  • Fernández-García, Marcos
  • Hidalgo, Salvador
  • Mateu, Isidre
  • Moll, Michael
  • Otero Ugobono, Sofia
  • Pellegrini, Giulio
  • Sorgenfrei, Niels
  • Wiehe, Moritz
Silicon detectors with intrinsic charge amplification implementing a n-p-p structure are considered as a sensor technology for future tracking and timing applications in high energy physics experiments. The performance of the intrinsic gain in Low Gain Avalanche Detectors (LGAD) after irradiation is crucial for the characterization of radiation hardness and timing properties in this technology. LGAD devices irradiated with reactor neutrons or 800 MeV protons reaching fluences of 2.3 × 10 n/cm were characterized using Transient Current Technique (TCT) measurements with red and infra-red laser pulses. Leakage current variations observed in different production lots and within wafers were investigated using Thermally Stimulated Current (TSC). Results showed that the intrinsic charge amplification is reduced with increasing fluence up to 10 n/cm which is related to an effective acceptor removal. Further relevant issues were charge collection homogeneity across the detector surface and leakage current performance before and after irradiation., This work was developed in the framework of the CERN RD50 collaboration and partially financed by the Spanish Ministry of Economy, Industry and Competitiveness through the Particle Physics National Program (Ref. FPA2014-55295-C3-2-R and FPA2015-69260-C3-3-R) and co-financed with FEDER funds., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radiation hardness of gallium doped low gain avalanche detectors

  • Kramberger, G.
  • Carulla, Mar
  • Cavallaro, E.
  • Cindro, V.
  • Flores, David
  • Galloway, Z.
  • Grinstein, S.
  • Hidalgo, Salvador
  • Fadeyev, V.
  • Lange, J.
  • Mandić, I.
  • Merlos, A.
  • McKinney-Martinez, F.
  • Mikuž, M.
  • Quirion, David
  • Pellegrini, Giulio
  • Petek, M.
  • Sadrozinski, H. F.W.
  • Seiden, A.
  • Zavrtanik, M.
Low Gain Avalanche Detectors (LGADs) are based on a n++-p+-p-p++ structure where appropriate doping of multiplication layer (p+) leads to high enough electric fields for impact ionization. Operation of these detectors in harsh radiation environments leads to decrease of gain attributed to the effective acceptor removal in the multiplication layer. In order to cope with that devices were produced where boron was replaced by gallium. The initial radiation hardness studies show a smaller degradation of gain with neutron fluence indicating that gallium is more difficult to displace/deactivate from the lattice site than boron., Part of this work has been financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program ( FPA2015-69260-C3-3-R and FPA2014-55295-C3-2-R ) and carried out under the Spanish ICTS Network MICRONANOFABS partially supported by MINECO . The support came also from the European Union’s Horizon 2020 Research and Innovation funding program , under Grant Agreement no. 654168 (AIDA-2020) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

50μm thin Low Gain Avalanche Detectors (LGAD) for timing applications

  • Carulla, Mar
  • Doblas, Alberto
  • Flores, David
  • Galloway, Z.
  • Hidalgo, Salvador
  • Kramberger, G.
  • Luce, Z.
  • Mandic, I.
  • Mazza, S.
  • Merlos Domingo, Ángel
  • Pellegrini, Giulio
  • Quirion, David
  • Rodríguez, R.
  • Sadrozinski, H. F.W.
  • Seiden, A.
  • Zhao, Y.
LGAD detectors on 300μm thick high resistivity p-type substrates were proposed for the first time by IMB-CNM-CSIC. They are customized Avalanche Photodiodes (APD) to obtain a high electric field region confined close to the reversed junction. Therefore, only electrons generated by an incident particle passing through the detector and drifting to the n+ contact, start the impact ionization process. Thus, the collected charge is multiplied. The basic difference between APDs and LGADs is the gain. LGADs have a moderate gain in order to avoid the inherent problems due to high multiplication: cross talk and high noise. In that way, the detector signal can be kept high without increasing the noise. These devices have been successfully fabricated and extensively characterized, before and after irradiation. Unfortunately, neutron and proton radiation cause the degradation of the gain and the creation of bulk traps, degrading the timing resolution. One way to reduce the radiation induced degradation is to minimize the substrate thickness, thus improving the timing resolution of LGAD detectors. Two technology approaches have been contemplated: the use of SOI (Silicon on insulator) substrates and Silicon to Silicon bonding substrates, both with a very thin active silicon layer of 50μm. As a consequence, drifting distances of generated electrons and holes are significantly reduced, resulting in a decrease in the number of electrons and holes trapped by radiation induced bulk defects. A new family of thin detectors, produced in 2×2 arrays prototypes, for the ATLAS experiment High Granularity Timing Detector (HGTD) is proposed. These detectors are suitable for timing applications with time resolution in the range of 30 ps at 20 °C. Optimization of the LGAD structures for the HGTD experiment and the detector experimental performances are presented and discussed., This work was developed in the framework of the RD-50 collaboration and financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program ( FPA2014-55295-C3-2-R , FPA2015-69260-C3-3-R ). It has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by the Spanish Ministry of Economy and Competitiveness . This project has received funding from the European Union’s Horizon 2020 Research and Innovation program, Slovenia under Grant Agreement no. 654168 (AIDA-2020) and co-financed with FEDER funds, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Timing performance of small cell 3D silicon detectors

  • Kramberger, G.
  • Cindro, V.
  • Flores, David
  • Hidalgo, Salvador
  • Hiti, B.
  • Manna, Maria
  • Mandić, I.
  • Mikuž, M.
  • Quirion, David
  • Pellegrini, Giulio
  • Zavrtanik, M.
A silicon 3D detector with a single cell of 50x50 um2 was produced and evaluated for timing applications. The measurements of time resolution were performed for 90Sr electrons with dedicated electronics used also for determining time resolution of Low Gain Avalanche Detectors (LGADs). The measurements were compared to those with LGADs and also simulations. The studies showed that the dominant contribution to the timing resolution comes from the time walk originating from different induced current shapes for hits over the cell area. This contribution decreases with higher bias voltages, lower temperatures and smaller cell sizes. It is around 30 ps for a 3D detector of 50x50 um2 cell at 150 V and -20C, which is comparable to the time walk due to Landau fluctuations in LGADs. It even improves for inclined tracks and larger pads composed of multiple cells. A good agreement between measurements and simulations was obtained, thus validating the simulation results., Part of this work has been financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program (FPA2015-69260-C3-3-R and FPA2014-55295-C3-2-R), by the European Union's Horizon 2020 Research and Innovation funding program, under Grant Agreement no. 654168 (AIDA-2020). The work was also financed by the Slovenian Research Agency (ARRS) within the scope of research program P-00135., Peer reviewed