Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Performance study of a 3 x 1 x 1 m(3) dual phase liquid Argon Time Projection Chamber exposed to cosmic rays

  • Aimard, B.
  • Urda Gómez, Lourdes
  • WA105 Collaboration
This work would not have been possible without the support of the Swiss National Science Foundation, Switzerland; CEA and CNRS/IN2P3, France; KEK and the JSPS program, Japan; Ministerio de Ciencia e Innovacion in Spain under grants FPA2016-77347-C2, SEV-2016-0588 and MdM-2015-0509, Comunidad de Madrid, the CERCA program of the Generalitat de Catalunya and the fellowship (LCF/BQ/DI18/11660043) from "La Caixa" Foundation (ID 100010434); the Programme PNCDI III, CERN-RO, under Contract 2/2020, Romania; the U.S. Department of Energy under Grant No. DE-SC0011686. This project has received funding from the European Union's Horizon 2020 Research and Innovation program under Grant Agreement no. 654168. The authors are also grateful to the French government operated by the National Research Agency (ANR) for the LABEX Enigmass, LABEX Lyon Institute of Origins (ANR-10-LABX-0066) of the Universite de Lyon for its financial support within the program "Investissements d'Avenir" (ANR-11-IDEX-0007)., We report the results of the analyses of the cosmic ray data collected with a 4 tonne (3x1x1 m(3)) active mass (volume) Liquid Argon Time-Projection Chamber (TPC) operated in a dual-phase mode. We present a detailed study of the TPC's response, its main detector parameters and performance. The results are important for the understanding and further developments of the dual-phase technology, thanks to the verification of key aspects, such as the extraction of electrons from liquid to gas and their amplification through the entire one square metre readout plain, gain stability, purity and charge sharing between readout views., Swiss National Science Foundation (SNSF), French Atomic Energy Commission, Centre National de la Recherche Scientifique (CNRS), High Energy Accelerator Research Organization (KEK), Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT), Japan Society for the Promotion of Science, Spanish Government FPA2016-77347-C2 SEV-2016-0588, MdM-2015-0509, Comunidad de Madrid, CERCA program of the Generalitat de Catalunya, La Caixa Foundation LCF/BQ/DI18/11660043 100010434, Programme PNCDI III, Romania, CERN-RO, Romania 2/2020, United States Department of Energy (DOE) SC0011686, European Commission 654168, Universite de Lyon ANR-10-LABX-0066 ANR-11-IDEX-0007
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Development of a silicon bulk radiation damage model for Sentaurus TCAD

  • Folkestad, Å.
  • Akiba, K.
  • Beuzekom, M. van
  • Buchanan, E.
  • Collins, P.
  • Dall'Occo, E.
  • Canto, A. Di
  • Evans, T.
  • Franco Lima, V.
  • García Pardiñas, Julián
  • Schindler, H.
  • Vicente, M.
  • Vieites Díaz, María
  • Williams, M.
This article presents a new bulk radiation damage model for p-type silicon for use in Synopsys Sentaurus TCAD. The model is shown to provide agreement between experiment and simulation for the voltage dependence of the leakage current and the charge collection efficiency, for fluences up to 8 × 1015 1 MeV neq∕cm2 .
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Silicon 3D Microdetectors for Microdosimetry in Hadron Therapy

  • Guardiola, Consuelo
  • Fleta, Celeste
  • Quirion, David
  • Pellegrini, Giulio
  • Gómez Rodríguez, Faustino
The present overview describes the evolution of new microdosimeters developed in the National Microelectronics Center in Spain (IMB-CNM, CSIC), ranging from the first ultra-thin 3D diodes (U3DTHINs) to the advanced 3D-cylindrical microdetectors, which have been developed over the last 10 years. In this work, we summarize the design, main manufacture processes, and electrical characterization of these devices. These sensors were specifically customized for use in particle therapy and overcame some of the technological challenges in this domain, namely the low noise capability, well-defined sensitive volume, high spatial resolution, and pile-up robustness. Likewise, both architectures reduce the loss of charge carriers due to trapping effects, the charge collection time, and the voltage required for full depletion compared to planar silicon detectors. In particular, a 3D‒cylindrical architecture with electrodes inserted into the silicon bulk and with a very well‒delimited sensitive volume (SV) mimicked a cell array with shapes and sizes similar to those of mammalian cells for the first time. Experimental tests of the carbon beamlines at the Grand Accélérateur National d’Lourds (GANIL, France) and Centro Nazionale Adroterapia Oncologica (CNAO, Italy) showed the feasibility of the U3DTHINs in hadron therapy beams and the good performance of the 3D‒cylindrical microdetectors for assessing linear energy distributions of clinical beams, with clinical fluence rates of 5 × 107 s−1cm−2 without saturation. The dose-averaged lineal energies showed a generally good agreement with Monte Carlo simulations. The results indicated that these devices can be used to characterize the microdosimetric properties in hadron therapy, even though the charge collection efficiency (CCE) and electronic noise may pose limitations on their performance, which is studied and discussed herein. In the last 3D‒cylindrical microdetector generation, we considerably improved the CCE due to the microfabrication enhancements, which have led to shallower and steeper dopant profiles. We also summarize the successive microdosimetric characterizations performed with both devices in proton and carbon beamlines
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent technological developments on LGAD and iLGAD detectors for tracking and timing applications

  • Pellegrini, Giulio
  • Baselga, M.
  • Carulla, M.
  • Fernández Martínez, Patricia
  • Fernández-García, Marcos
  • Flores, David
  • Gallrapp, Christian
  • Hidalgo, Salvador
  • Merlos Domingo, Ángel
  • Moll, Michael
  • Quirion, David
  • Vila, Iván
Proceeding of the 10th International “Hiroshima” Symposium on the Development and Application of Semiconductor Tracking Detectors.-- et al., This paper reports the latest technological development on the Low Gain Avalanche Detector (LGAD) and introduces a new architecture of these detectors called inverse-LGAD (iLGAD). Both approaches are based on the standard Avalanche Photo Diodes (APD) concept, commonly used in optical and X-ray detection applications, including an internal multiplication of the charge generated by radiation. The multiplication is inherent to the basic n–p–p structure, where the doping profile of the p layer is optimized to achieve high field and high impact ionization at the junction. The LGAD structures are optimized for applications such as tracking or timing detectors for high energy physics experiments or medical applications where time resolution lower than 30 ps is required. Detailed TCAD device simulations together with the electrical and charge collection measurements are presented through this work., This work was developed in the framework of the CERN RD50 collaboration and financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program (FPA2013-48308-C2-2-P, FPA2014-55295-C3-2-R and FPA2013-48387-C6-1-P). This project has received funding from the European Union's Horizon 2020 Research and Innovation program under Grant Agreement no. 654168 (AIDA-2020)., Open Access funded by CERN., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Top-quark physics at the CLIC electron-positron linear collider

  • Abramowicz, H.
  • Boronat Arévalo, Marçà
  • Fullana, Esteban
  • Fuster, Juan
  • García, I.
  • Gomis, P.
  • Mateu, V.
  • Perelló, M.
  • Ruiz Jimeno, Alberto
  • Vila, Iván
  • Vos, Marcel
The CLICdp collaboration: et al., The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies s = 380 GeV, 1.5 TeV, and 3 TeV. Its aim is to explore the energy frontier, providing sensitivity to physics beyond the Standard Model (BSM) and precision measurements of Standard Model processes with an emphasis on Higgs boson and top-quark physics. The opportunities for top-quark physics at CLIC are discussed in this paper. The initial stage of operation focuses on top-quark pair production measurements, as well as the search for rare flavour-changing neutral current (FCNC) top-quark decays. It also includes a top-quark pair production threshold scan around 350 GeV which provides a precise measurement of the top-quark mass in a well-defined theoretical framework. At the higher-energy stages, studies are made of top-quark pairs produced in association with other particles. A study of ttH production including the extraction of the top Yukawa coupling is presented as well as a study of vector boson fusion (VBF) production, which gives direct access to high-energy electroweak interactions. Operation above 1 TeV leads to more highly collimated jet environments where dedicated methods are used to analyse the jet constituents. These techniques enable studies of the top-quark pair production, and hence the sensitivity to BSM physics, to be extended to higher energies. This paper also includes phenomenological interpretations that may be performed using the results from the extensive top-quark physics programme at CLIC. [Figure not available: see fulltext.], Article funded by SCOAP3., This work was supported by the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 654168; the European Commission through the Marie Curie Career Integration Grant 631962; the Spanish Ministry of Economy, Industry and Competitiveness under projects MINEICO/FEDER-UE, FPA2015-65652-C4-3-R, FPA2015-71292-C2-1-P and FPA2015-71956-REDT; the IFT Centro de Excelencia Severo Ochoa program, under grants SEV-2012-0249 and SEV-2014-0398, Spain; the Spanish MINECO Ramon y Cajal program (RYC-2014-16022) and the MECD grant FPA2016-78645-P, Spain
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Results on proton-irradiated 3D pixel sensors interconnected to RD53A readout ASIC

  • Duarte Campderros, J.
  • Currás, Esteban
  • Fernández-García, Marcos
  • Gómez, Gervasio
  • García, A.
  • González, Javier
  • Silva Jimenez, E.
  • Vila, Iván
  • Jaramillo, R.
  • Meschini. M.
  • Dinardo, M. E.
  • Gennai, S.
  • Moroni, L.
  • Demaria, N.
  • Monteil, E.
  • Messineo, A.
  • Hidalgo, Salvador
  • Merlos Domingo, Ángel
  • Pellegrini, Giulio
  • Quirion, David
  • Manna, M.
On behalf of the CMS Collaboration: et al., Test beam results obtained with 3D pixel sensors bump-bonded to the RD53A prototype readout ASIC are reported. Sensors from FBK Italy and IMB-CNM (Spain) have been tested before and after proton-irradiation to an equivalent fluence of about 1 × 10 ≠cm (1MeV equivalent neutrons). This is the first time that one single collecting electrode fine pitch 3D sensors are irradiated up to such fluence bump-bonded to a fine pitch ASIC. The preliminary analysis of the collected data shows no degradation on the hit detection efficiencies of the tested sensors after high energy proton irradiation, demonstrating the excellent radiation tolerance of the 3D pixel sensors. Thus, they will be excellent candidates for the extreme radiation environment at the innermost layers of the HL-LHC experiments., This project has been partially supported by the Spanish Ministry of Science, Innovation and Universities under grants FPA2015-71292-C2-2-P, FPA2017-85155-C4-1-R and FPA2017-85155-C4-2-R; and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement no. 654168 (AIDA-2020).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High resolution 3D characterization of silicon detectors using a Two Photon Absorption Transient Current Technique

  • Fernández-García, Marcos
  • Jaramillo, R.
  • Moll, Michael
  • Montero Santos, Raúl
  • Palomo, Francisco Rogelio
  • Vila, Iván
  • Wiehe, Moritz
The Two Photon Absorption Transient Current Technique (TPA-TCT) is a tool to characterize semiconductor detectors using a spatially confined laser probe. Excess charge carriers are produced by the simultaneous absorption of two sub-bandgap photons in the material. The current induced by the motion of carriers is studied using well known TCT systems. Differently to standard TCT where the energy deposition (pair creation) is continuous along the beam, TPA-TCT reduces this region to an ellipsoidal volume, achieving thus, true 3D spatial resolution. This paper gives an overview of the technique and shows its performance in irradiated detectors, in particular diodes and High Voltage CMOS detectors., This work was performed in the framework of the CERN-RD50 collaboration under the projects 2016-04, 2017-02. Activity partially supported by the Spanish Ministry of Science grants FPA2015-71292-C2-2-P and FPA2017-85155-C4-1-R; and the European Union’s Horizon 2020 Research and Innovation program under Grant Agreement no. 654168 (AIDA-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inverse Low Gain Avalanche Detectors (iLGADs) for precise tracking and timing applications

  • Currás, Esteban
  • Carulla, M.
  • Centis Vignali, Matteo
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Flores, David
  • García Alonso, A.
  • Gómez, Gervasio
  • González, Javier
  • Hidalgo, Salvador
  • Jaramillo, R.
  • Merlos Domingo, Ángel
  • Moll, Michael
  • Pellegrini, Giulio
  • Quirion, David
  • Vila, Iván
arXiv:1904.02061v1, Low Gain Avalanche Detector (LGAD) is the baseline sensing technology of the recently proposed Minimum Ionizing Particle (MIP) end-cap timing detectors (MTD) at the Atlas and CMS experiments. The current MTD sensor is designed as a multi-pad matrix detector delivering a poor position resolution, due to the relatively large pad area, around 1 mm2; and a good timing resolution, around 20–30 ps. Besides, in his current technological incarnation, the timing resolution of the MTD LGAD sensors is severely degraded once the MIP particle hits the inter-pad region since the signal amplification is missing for this region. This limitation is named as the LGAD fill-factor problem. To overcome the fill factor problem and the poor position resolution of the MTD LGAD sensors, a p-in-p LGAD (iLGAD) was introduced. Contrary to the conventional LGAD, the iLGAD has a non-segmented deep p-well (the multiplication layer). Therefore, iLGADs should ideally present a constant gain value over all the sensitive region of the device without gain drops between the signal collecting electrodes; in other words, iLGADs should have a 100% fill-factor by design. In this paper, tracking and timing performance of the first iLGAD prototypes is presented., RD50 Collaboration for its support. This activity was partially supported by the Spanish Ministry of Science under grants FPA2015-71292-C2-2-P, FPA2017-85155-C4-1-R and FPA2017-85155-C4-2-R; and the European Union Horizon 2020 Research and Innovation Framework Programme under Grant Agreement no. 654168 (AIDA-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manufacturability and Stress Issues in 3D Silicon Detector Technology at IMB-CNM

  • Quirion, David
  • Manna, M.
  • Hidalgo, Salvador
  • Pellegrini, Giulio
This paper provides an overview of 3D detectors fabrication technology developed in the clean room of the Microelectronics Institute of Barcelona (IMB-CNM). Emphasis is put on manufacturability, especially on stress and bow issues. Some of the technological solutions proposed at IMB-CNM to improve manufacturability are presented. Results and solutions from other research institutes are also mentioned. Analogy with through-silicon-via technology is drawn. This article aims at giving hints of the technology improvements implemented to upgrade from a R&D process to a mature technology., This work has been financed by the Spanish Ministry of Science and Innovation (MICIN) through the Particle Physics National Program (RTI2018-094906-B-C22 and FPA2017-85155-C4-2-R) and by the European Union’s Horizon 2020 Research and Innovation funding program, under Grant Agreement No. 654168 (AIDA-2020). All the manufacturing were performed at the IMB-CNM clean room facilities, member of the Spanish ICTS Network MICRONANOFABS partially supported by MICIN and FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The CMS Phase-1 pixel detector upgrade

  • CMS Collaboration
  • Currás, Esteban
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • García Alonso, A.
  • Gómez, Gervasio
  • González Sánchez, J.
  • Jaramillo, R.
  • Moya, David
  • Vila, Iván
  • López Virto, A.
CMS collaboration: et al., The CMS detector at the CERN LHC features a silicon pixel detector as its innermost subdetector. The original CMS pixel detector has been replaced with an upgraded pixel system (CMS Phase-1 pixel detector) in the extended year-end technical stop of the LHC in 2016/2017. The upgraded CMS pixel detector is designed to cope with the higher instantaneous luminosities that have been achieved by the LHC after the upgrades to the accelerator during the first long shutdown in 2013–2014. Compared to the original pixel detector, the upgraded detector has a better tracking performance and lower mass with four barrel layers and three endcap disks on each side to provide hit coverage up to an absolute value of pseudorapidity of 2.5. This paper describes the design and construction of the CMS Phase-1 pixel detector as well as its performance from commissioning to early operation in collision data-taking., The tracker groups gratefully acknowledge financial support from the following funding agencies: BMWFW and FWF (Austria); FNRS and FWO (Belgium); CERN; MSE and CSF (Croatia); Academy of Finland, MEC, and HIP (Finland); CEA and CNRS/IN2P3 (France); BMBF, DFG, and HGF (Germany); GSRT (Greece); NKFIA K124850, and Bolyai Fellowship of the Hungarian Academy of Sciences (Hungary); DAE and DST (India); IPM (Iran); INFN (Italy); PAEC (Pakistan); SEIDI, CPAN, PCTI and FEDER (Spain); Swiss Funding Agencies (Switzerland); MST (Taipei); STFC (United Kingdom); DOE and NSF (U.S.A.). Individuals have received support from HFRI (Greece). The irradiation campaign has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement no. 654168., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Sensores pixelados altamente resistentes a la radiación para la mejora a alta luminosidad del detector CMS del Gran Colisionador de Hadrones, Highly radiation tolerant pixelated sensors for the high luminosity upgrade of the CMS detector of the Large Hadron Collider

  • García Alonso, A.
Programa de Doctorado en Ciencia y Tecnología., [EN]: Due to its large instantaneous luminosity, the future upgrade of the largest particle accelerator of the world, the Large Hadron Collider (LHC), is going to set strong requirements on the radiation hardness of all the technology involved in its accelerating system, but also in its particle detection machines. One of the big detectors recording the energetic proton collisions is the Compact Muon Solenoid (CMS). The sensors comprising its inner tracker (IT) will have to face an unprecedented rate of collisions, ten times higher than the current detector. The silicon 3D pixel technology, with its superior radiation hardness and lower operation voltage and power dissipation, is being considered in CMS as a valid option for the inner most layers in order to cope with these extremely high radiation tolerance requirements. After contextualizing the current CMS situation, as well as stating the future upgrade conditions, a study of the Physics behind the detection processes and the state-of-the-art is carried out. This will bring us to the presentation of the technology I have tested - the 3D sensors - together with the characterisation techniques and analysis processes employed. A full study and characterisation of pixelated 3D silicon sensors fabricated by Centro Nacional de Microelectronica (CNM, Spain) and Fondazione Bruno Kessler (FBK, Italy) is performed. The sensors were bump-bonded to ROC4SENS and RD53A readout chips. They were measured, both fresh and after proton irradiation, at several test beams in the LHC Super Proton Synchrotron (SPS), and in the German Electron Synchrotron (DESY). Chapter 1 introduces the current LHC and its high luminosity upgrade future necessities. The requirements 3D sensors must fulfill to be successfully operated inside the upgraded CMS IT are explained. Chapter 2 gives a comprehensive overview of the physical processes and working principles behind silicon sensors, as well as how they are structured and fabricated. Chapter 3 introduces the devices under test, their irradiation process and testing setups, as well as the data reconstruction algorithm and parameters of interest. Chapter 4 constitutes the summary of the results obtained from the full characterisation. Results on hit efficiency, charge collection, cluster size and hit resolution, for fresh and irradiated samples, are presented. Response as a function of bias voltage, particle beam incidence angle and temperature is considered. This thesis aims to demonstrate that the 3D technology is highly suitable for the CMS inner most tracking layers., [ES]: Debido a su alta luminosidad instantánea, la futura renovación del Gran Colisionador de Hadrones (LHC), impondrá estrictos requisitos en términos de tolerancia a la radiación a toda la tecnología implicada en su cadena de aceleración, así como en su maquinaria de detección de partículas. Uno de los grandes experimentos encargados de registrar las energéticas colisiones de protones es el Solenoide Compacto de Muones (CMS). Los sensores que conforman su detector de trazas interno (IT) deberán enfrentarse a una tasa de colisiones sin precedentes, diez veces mayor que la del detector actual. La tecnología de píxeles 3D de silicio, con su superior tolerancia a la radiación, y su reducido voltaje de operación y disipación de potencia, es considerada como opción válida para las capas más internas del IT, soportando sus altos niveles de radiación. Tras contextualizar la situación actual de CMS y establecer las condiciones de su futura actualización, se presenta la Física que hay detrás de los procesos de detección y las tecnologías existentes. Esto llevará a la presentación de la tecnología que he testado - los sensores 3D - así como las técnicas de caracterización y procesos de análisis empleados. Se realiza un estudio y caracterización de sensores de silicio 3D pixelados, fabricados por el Centro Nacional de Microelectrónica (CNM, España) y la Fondazione Bruno Kessler (FBK, Italia). Los sensores se operan conectados mediante micro-soldaduras a los chips de lectura ROC4SENS y RD53A. Antes y después de irradiarlos con protones, se someten a varias medidas "test beam" en el Súper Sincrotrón de Protones del LHC (SPS) y en el Sincrotrón Alemán de Electrones (DESY). En el Capítulo 1 se presenta el LHC actual, así como sus futuras necesidades una vez actualizado a alta luminosidad (HL). Se explican los requisitos que los sensores 3D deben satisfacer para ser operados con éxito dentro del nuevo IT de CMS. El Capítulo 2 se adentra en los procesos físicos que explican el funcionamiento de los sensores de silicio, así como su estructura y fabricación. El Capítulo 3 introduce los dispositivos en estudio, su proceso de irradiación y los lugares de medida, así mismo, se explica el algoritmo de reconstrucción de datos y los parámetros de interés. El Capítulo 4 constituye el resumen de los resultados obtenidos tras la completa caracterización de los sensores. Se estudia la eficiencia de hit, colección de carga, tamaño de clúster y resolución de hit, tanto como para sensores nuevos como irradiados. Se tiene en consideración la respuesta en función del voltaje, ángulo de incidencia del haz de partículas y temperatura. La presente tesis pretende demostrar que la tecnología 3D es altamente adecuada para las capas más internas de reconstrucción de trazas del detector CMS., Part of the activities carried out during this PhD was supported by the Spanish Ministry of Science under grants FPA2015-71292-C2-2-P and FPA2017-85155-C4-1-R; and the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement no. 654168. (AIDA-2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of HPK n+-p planar pixel sensors for the CMS Phase-2 upgrade, A. Calderón, J. Duarte Campderros, M. Fernandez, G. Gomez, F.J. Gonzalez Sanchez, R. Jaramillo Echeverria, C. Lasaosa, D. Moya, J. Piedra, A. Ruiz Jimeno, L. Scodellaro, I. Vila, A.L. Virto, J.M. Vizan Garcia

  • CMS Collaboration
  • Calderon, Alicia
  • Duarte Campderros, J.
  • Fernández-García, Marcos
  • Gómez, Gervasio
  • González Sánchez, J.
  • Jaramillo, R.
  • Lasaosa, Clara
  • Moya, David
  • Piedra, Jonatan
  • Ruiz Jimeno, Alberto
  • Scodellaro, Luca
  • Vila, Iván
  • López Virto, A.
  • Vizán, J.
The tracker group of the CMS collaboration: et al., To cope with the challenging environment of the planned high luminosity upgrade of the Large Hadron Collider (HL-LHC), scheduled to start operation in 2029, CMS will replace its entire tracking system. The requirements for the tracker are largely determined by the long operation time of 10 years with an instantaneous peak luminosity of up to 7.5 × 1034 cm−2s−1 in the ultimate performance scenario. Depending on the radial distance from the interaction point, the silicon sensors will receive a particle fluence corresponding to a non-ionisingenergy loss of up to 𝛷eq = 3.5 × 1016 cm−2. This paper focuses on planar pixel sensor design and qualification up to a fluence of 𝛷eq = 1.4 × 1016 cm−2. For the development of appropriate planar pixel sensors an R&D program was initiated, which includes 𝑛+-𝑝 sensors on 150 mm (6’’) wafers with an active thickness of 150 μm with pixel sizes of 100 × 25 μm2 and 50 × 50 μm2 manufactured by Hamamatsu Photonics K.K. (HPK). Single chip modules with ROC4Sens and RD53A readout chips were made. Irradiation with protons and neutrons, as well was an extensive test beam campaign at DESY were carried out. This paper presents the investigation of various assemblies mainly with ROC4Sens readout chips. It demonstrates that multiple designs fulfil the requirements in terms of breakdown voltage, leakage current and efficiency. The single point resolution for 50 × 50 μm2 pixels is measured as 4.0 μm for non-irradiated samples, and 6.3 μm after irradiation to 𝛷eq = 7.2 × 1015 cm−2., This work was supported by the German Federal Ministry of Education and Research (BMBF) in the framework of the “FIS-Projekt - Fortführung des CMS-Experiments zum Einsatz am HL-LHC: Verbesserung des Spurdetektors für das Phase-2 Upgrade des CMS-Experiments” and supported by the H2020 project AIDA-2020, GA no. 654168. The measurements leading to these results have been performed at the Test Beam Facility at DESY Hamburg (Germany), a member of the Helmholtz Association (HGF). This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 884104 (PSI-FELLOW-III-3i). Individuals have received support from HFRI (Greece) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First experimental measurements of 2D microdosimetry maps in proton therapy

  • Guardiola Salmerón, Consuelo
  • Bachiller-Perea, Diana
  • Kole, Emmanuel M Mate
  • Fleta, Celeste
  • Quirion, David
  • De Marzi, Ludovic
  • Gómez, Faustino
Empirical data in proton therapy indicate that relative biological effectiveness (RBE) is not constant, and it is directly related to the linear energy transfer (LET). The experimental assessment of LET with high resolution would be a powerful tool for minimizing the LET hot spots in intensity-modulated proton therapy, RBE- or LET-guided evaluation and optimization to achieve biologically optimized proton plans, verifying the theoretical predictions of variable proton RBE models, and so on. This could impact clinical outcomes by reducing toxicities in organs at risk., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, construction and commissioning of a technological prototype of a highly granular SiPM-on-tile scintillator-steel hadronic calorimeter

  • CALICE Collaboration
  • Irles Quiles, Adrián
The CALICE collaboration is developing highly granular electromagnetic and hadronic calorimeters for detectors at future energy frontier electron-positron colliders. After successful tests of a physics prototype, a technological prototype of the Analog Hadron Calorimeter has been built, based on a design and construction techniques scalable to a collider detector. The prototype consists of a steel absorber structure and active layers of small scintillator tiles that are individually read out by directly coupled SiPMs. Each layer has an active area of 72 x 72 cm2 and a tile size of 3 x 3 cm2. With 38 active layers, the prototype has nearly 22, 000 readout channels, and its total thickness amounts to 4.4 nuclear interaction lengths. The dedicated readout electronics provide time stamping of each hit with an expected resolution of about 1 ns. The prototype was constructed in 2017 and commissioned in beam tests at DESY. It recorded muons, hadron showers and electron showers at different energies in test beams at CERN in 2018. In this paper, the design of the prototype, its construction and commissioning are described. The methods used to calibrate the detector are detailed, and the performance achieved in terms of uniformity and stability is presented.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measured and projected beam backgrounds in the Belle II experiment at the SuperKEKB collider

  • Natochii, A.
  • Browder, T. E.
  • Cao, L.
  • Cautero,G.
  • Dreyer, S.
  • Frey, Ariane
  • Gabrielli, Alice
  • Giuressi, Dario
  • Ishibashi, Takuya
  • Jin,Y.
  • Kojima, K.
  • Kraetzschmar, T.
  • Lanceri, L.
  • Liptak,Z.
  • Liventsev, D.
  • Mariñas Pardo, Carlos
  • Massaccesi, L.
  • Matsuoka, K.
  • Meier,F.
  • Miller, C.
  • Nakayama, H.
  • Niebuhr,C.
  • Novosel, A.
  • Parham,K.
  • Popov,I.
  • Rizzo, G.
  • Roney, J. M.
  • Ryu, S. Y.
  • Santelj, L.
  • Schneider, S.
  • Schueler, J.
  • Schwenker, B.
  • Shi, X. D.
  • Simon, F.
  • Stefkova,S.
  • Takahashi, M.
  • Tanigawa, H.
  • Taniguchi,N.
  • Terui, S.
  • Vahsen, S. E.
  • Vitale,L.
  • Vossen, A.
  • Wang,Z.
  • Wiechczynski,J.
  • Windel, H.
  • Yoshihara,K.
28 pages, 17 figures, 9 tables (revised); in v3, we corrected Table 5 units for the measured fast neutron fluence by the TPC detectors from x10^9 n_eq/cm^2 to x10^8 n_eq/cm^2, which was a typo in the previous versions; also, we added the value of the luminosity for Tables 5 and 6, The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam size at the interaction point by squeezing the betatron function down to $\beta^{*}_{\rm y}=\rm 0.3~mm$. To ensure detector longevity and maintain good reconstruction performance, beam backgrounds must remain well controlled. We report on current background rates in Belle II and compare these against simulation. We find that a number of recent refinements have significantly improved the background simulation accuracy. Finally, we estimate the safety margins going forward. We predict that backgrounds should remain high but acceptable until a luminosity of at least $\rm 2.8 \times 10^{35}~cm^{-2}s^{-1}$ is reached for $\beta^{*}_{\rm y}=\rm 0.6~mm$. At this point, the most vulnerable Belle II detectors, the Time-of-Propagation (TOP) particle identification system and the Central Drift Chamber (CDC), have predicted background hit rates from single-beam and luminosity backgrounds that add up to approximately half of the maximum acceptable rates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Studies of uniformity of 50 μm low-gain avalanche detectors at the Fermilab test beam

  • Apresyan, A.
  • Xie, S.
  • Pena, C.
  • Arcidiacono, R.
  • Cartiglia, N.
  • Carulla, M.
  • Derylo, G.
  • Ferrero, M.
  • Flores, David
  • Freeman, P.
  • Galloway, Z.
  • Ghassemi, A.
  • Al Ghoul, H.
  • Gray, L.
  • Hidalgo, Salvador
  • Kamada, S.
  • Los, S.
  • Mandurrino, M.
  • Merlos, A.
  • Minafra, N.
  • Pellegrini, Giulio
  • Quirion, David
  • Ronzhin, A.
  • Royon, C.
  • Sadrozinski, H.
  • Seiden, A.
  • Sola, V.
  • Spiropulu, M.
  • Staiano, A.
  • Uplegger, L.
  • Yamamoto, K.
  • Yamamura, K.
In this paper we report measurements of the uniformity of time resolution, signal amplitude, and charged particle detection efficiency across the sensor surface of low-gain avalanche detectors (LGAD). Comparisons of the performance of sensors with different doping concentrations and different active thicknesses are presented, as well as their temperature dependence and radiation tolerance up to 6×1014 n/cm2. Results were obtained at the Fermilab test beam facility using 120 GeV proton beams, and a high precision pixel tracking detector. LGAD sensors manufactured by the Centro Nacional de Microelectrónica (CNM) and Hamamatsu Photonics (HPK) were studied. The uniformity of the sensor response in pulse height before irradiation was found to have a 2% spread. The signal detection efficiency and timing resolution in the sensitive areas before irradiation were found to be 100% and 30–40 ps, respectively. A “no-response” area between pads was measured to be about 130 μm for CNM and 170μm for HPK sensors. After a neutron fluence of 6×1014 n/cm2 the CNM sensor exhibits a large gain variation of up to a factor of 2.5 when comparing metalized and non-metalized sensor areas. An irradiated CNM sensor achieved a time resolution of 30 ps for the metalized area and 40 ps for the non-metalized area, while a HPK sensor irradiated to the same fluence achieved a 30 ps time resolution., This work was supported by the Fermilab LDRD 2017.027 ; by the United States Department of Energy grant DE-FG02-04ER41286 ; by the California Institute of Technology High Energy Physics under Contract DE-SC0011925 ; by the European Union’s Horizon 2020 Research and Innovation funding program, under Grant Agreement no. 654168 (AIDA-2020) and Grant Agreement no. 669529 (ERC UFSD669529) ; by the Italian Ministero degli Affari Esteri under the Italy-US scientific collaboration program and INFN Gruppo V UFSD project; and by the Spanish Ministry of Economy, Industry and Competitiveness through the Particle Physics National Program (ref. FPA2014-55295-C3-2-R and FPA2015-69260-C3-3-R ) co-financed with FEDER funds., This document was prepared using the resources of the Fermi National Accelerator Laboratory (Fermilab), a U.S. Department of Energy, Office of Science, HEP User Facility. Fermilab is managed by Fermi Research Alliance, LLC (FRA), acting under Contract No. DE-AC02-07CH11359. Part of this work was performed within the framework of the CERN RD50 collaboration., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radiation hardness of gallium doped low gain avalanche detectors

  • Kramberger, G.
  • Carulla, Mar
  • Cavallaro, E.
  • Cindro, V.
  • Flores, David
  • Galloway, Z.
  • Grinstein, S.
  • Hidalgo, Salvador
  • Fadeyev, V.
  • Lange, J.
  • Mandić, I.
  • Merlos, A.
  • McKinney-Martinez, F.
  • Mikuž, M.
  • Quirion, David
  • Pellegrini, Giulio
  • Petek, M.
  • Sadrozinski, H. F.W.
  • Seiden, A.
  • Zavrtanik, M.
Low Gain Avalanche Detectors (LGADs) are based on a n++-p+-p-p++ structure where appropriate doping of multiplication layer (p+) leads to high enough electric fields for impact ionization. Operation of these detectors in harsh radiation environments leads to decrease of gain attributed to the effective acceptor removal in the multiplication layer. In order to cope with that devices were produced where boron was replaced by gallium. The initial radiation hardness studies show a smaller degradation of gain with neutron fluence indicating that gallium is more difficult to displace/deactivate from the lattice site than boron., Part of this work has been financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program ( FPA2015-69260-C3-3-R and FPA2014-55295-C3-2-R ) and carried out under the Spanish ICTS Network MICRONANOFABS partially supported by MINECO . The support came also from the European Union’s Horizon 2020 Research and Innovation funding program , under Grant Agreement no. 654168 (AIDA-2020) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

50μm thin Low Gain Avalanche Detectors (LGAD) for timing applications

  • Carulla, Mar
  • Doblas, Alberto
  • Flores, David
  • Galloway, Z.
  • Hidalgo, Salvador
  • Kramberger, G.
  • Luce, Z.
  • Mandic, I.
  • Mazza, S.
  • Merlos Domingo, Ángel
  • Pellegrini, Giulio
  • Quirion, David
  • Rodríguez, R.
  • Sadrozinski, H. F.W.
  • Seiden, A.
  • Zhao, Y.
LGAD detectors on 300μm thick high resistivity p-type substrates were proposed for the first time by IMB-CNM-CSIC. They are customized Avalanche Photodiodes (APD) to obtain a high electric field region confined close to the reversed junction. Therefore, only electrons generated by an incident particle passing through the detector and drifting to the n+ contact, start the impact ionization process. Thus, the collected charge is multiplied. The basic difference between APDs and LGADs is the gain. LGADs have a moderate gain in order to avoid the inherent problems due to high multiplication: cross talk and high noise. In that way, the detector signal can be kept high without increasing the noise. These devices have been successfully fabricated and extensively characterized, before and after irradiation. Unfortunately, neutron and proton radiation cause the degradation of the gain and the creation of bulk traps, degrading the timing resolution. One way to reduce the radiation induced degradation is to minimize the substrate thickness, thus improving the timing resolution of LGAD detectors. Two technology approaches have been contemplated: the use of SOI (Silicon on insulator) substrates and Silicon to Silicon bonding substrates, both with a very thin active silicon layer of 50μm. As a consequence, drifting distances of generated electrons and holes are significantly reduced, resulting in a decrease in the number of electrons and holes trapped by radiation induced bulk defects. A new family of thin detectors, produced in 2×2 arrays prototypes, for the ATLAS experiment High Granularity Timing Detector (HGTD) is proposed. These detectors are suitable for timing applications with time resolution in the range of 30 ps at 20 °C. Optimization of the LGAD structures for the HGTD experiment and the detector experimental performances are presented and discussed., This work was developed in the framework of the RD-50 collaboration and financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program ( FPA2014-55295-C3-2-R , FPA2015-69260-C3-3-R ). It has also made use of the Spanish ICTS Network MICRONANOFABS partially supported by the Spanish Ministry of Economy and Competitiveness . This project has received funding from the European Union’s Horizon 2020 Research and Innovation program, Slovenia under Grant Agreement no. 654168 (AIDA-2020) and co-financed with FEDER funds, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Timing performance of small cell 3D silicon detectors

  • Kramberger, G.
  • Cindro, V.
  • Flores, David
  • Hidalgo, Salvador
  • Hiti, B.
  • Manna, Maria
  • Mandić, I.
  • Mikuž, M.
  • Quirion, David
  • Pellegrini, Giulio
  • Zavrtanik, M.
A silicon 3D detector with a single cell of 50x50 um2 was produced and evaluated for timing applications. The measurements of time resolution were performed for 90Sr electrons with dedicated electronics used also for determining time resolution of Low Gain Avalanche Detectors (LGADs). The measurements were compared to those with LGADs and also simulations. The studies showed that the dominant contribution to the timing resolution comes from the time walk originating from different induced current shapes for hits over the cell area. This contribution decreases with higher bias voltages, lower temperatures and smaller cell sizes. It is around 30 ps for a 3D detector of 50x50 um2 cell at 150 V and -20C, which is comparable to the time walk due to Landau fluctuations in LGADs. It even improves for inclined tracks and larger pads composed of multiple cells. A good agreement between measurements and simulations was obtained, thus validating the simulation results., Part of this work has been financed by the Spanish Ministry of Economy and Competitiveness through the Particle Physics National Program (FPA2015-69260-C3-3-R and FPA2014-55295-C3-2-R), by the European Union's Horizon 2020 Research and Innovation funding program, under Grant Agreement no. 654168 (AIDA-2020). The work was also financed by the Slovenian Research Agency (ARRS) within the scope of research program P-00135., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel 3D Pixel Sensors for the Upgrade of the ATLAS Inner Tracker

  • Terzo, Stefano
  • Boscardin, Maurizio
  • Carlotto, Juan
  • Dalla Betta, Gian Franco
  • Darbo, Giovanni
  • Dorholt, Ole
  • Ficorella, Francesco
  • Gariano, Giuseppe
  • Gemme, Claudia
  • Giannini, Giulia
  • Grinstein, Sebastian
  • Heggelund, Andreas
  • Huiberts, Simon
  • Kok, Angela
  • Koybasi, Ozhan
  • Lapertosa, Alessandro
  • Lauritzen, Magne Elk
  • Manna, Maria
  • Mendicino, Roberto
  • Oide, Hideyuki
  • Pellegrini, Giulio
  • Povoli, Marco
  • Quirion, David
  • Rohne, Ole Myren
  • Ronchin, Sabina
  • Sandaker, Heidi
  • Abdulla Samy, Md Arif
  • Stugu, Bjarne
  • Vannoli, Leonardo
The ATLAS experiment will undergo a full replacement of its inner detector to face the challenges posed by the High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The new Inner Tracker (ITk) will have to deal with extreme particle fluences. Due to its superior radiation hardness the 3D silicon sensor technology has been chosen to instrument the innermost pixel layer of ITk, which is the most exposed to radiation damage. Three foundries (CNM, FBK, and SINTEF), have developed and fabricated novel 3D pixel sensors to meet the specifications of the new ITk pixel detector. These are produced in a single-side technology on either Silicon On Insulator (SOI) or Silicon on Silicon (Si-on-Si) bonded wafers by etching both n- and p-type columns from the same side. With respect to previous generations of 3D sensors they feature thinner active substrates and smaller pixel cells of 50 × 50 and 25 × 100 µm2. This paper reviews the main design and technological issues of these novel 3D sensors, and presents their characterization before and after exposure to large radiation doses close to the one expected for the innermost layer of ITk. The performance of pixel modules, where the sensors are interconnected to the recently developed RD53A chip prototype for HL-LHC, has been investigated in the laboratory and at beam tests. The results of these measurements demonstrate the excellent radiation hardness of this new generation of 3D pixel sensors that enabled the project to proceed with the pre-production for the ITk tracker., The authors would like to thank A. Rummler, M. Bomben, J. Lange and the other ATLAS ITk beam test participants for great support and discussions at the beam test as well as A. Dierlamm and F. Bögelspacher (KIT), K. Nakamura (CYRIC), L. Gonella and A. Hunter (University of Brimingham), V. Cindro (JSI) for the excellent support with the irradiation at the different facilities. The measurements leading to these results have been partially performed at the Test Beam Facility at DESY Hamburg (Germany), a member of the Helmholtz Association (HGF)., This work was partially funded by: MINECO, Spanish Government, under grants RTI2018-094906-B-C21, RTI2018-094906-B-C22 and SEV-2016-0588 (Severo Ochoa excellence programme); the Italian National Institute for Nuclear Physics (INFN), Projects RD_FASE2 and FASE2_ATLAS (CSN1); and by the H2020 project AIDA-2020, GA no. 654168., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Susceptibility characterization of beam pipe radiated noise for the PXD detector in Belle II experiment

  • Iglesias, M.
  • Leitl, P.
  • Müller, F.
  • Arcega, F.J.
  • Moser, H.G.
  • Kiesling, C.
  • Pradas, A.
  • Echeverría, I.
  • Piedrafita, F.J.
  • Arteche, F.
The new Pixel Vertex Detector (PXD) used in the upgrade of the high energy physics experiment Belle II is based on the DEPFET technology. Since the PXD is 2 mm far from the beam pipe, the effects of radiated interferences may be taken into account. Though the EM wave associated to the beam is very well confined (skin depth), the beam pipe is grounded to the accelerator and it may have noise currents on its external face due to pumps, auxiliary electronics, power converters, etc. which may produce radiated noise (H field). This analysis is part of the EMC approach that covers the analysis of the emissions and immunity characteristics, as well as the coupling phenomena and grounding issues to define the susceptibility levels required to ensure the successful integration of the detector and, specifically, to achieve the designed performance of the front-end electronics.