Pasar al contenido principal

PRODUCCION DE DETECTORES PARA LA MEJORA DEL EXPERIMENTO ATLAS DEL HL-LHC, CNM

RTI2018-094906-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manufacturability and Stress Issues in 3D Silicon Detector Technology at IMB-CNM

  • Quirion, David
  • Manna, M.
  • Hidalgo, Salvador
  • Pellegrini, Giulio
This paper provides an overview of 3D detectors fabrication technology developed in the clean room of the Microelectronics Institute of Barcelona (IMB-CNM). Emphasis is put on manufacturability, especially on stress and bow issues. Some of the technological solutions proposed at IMB-CNM to improve manufacturability are presented. Results and solutions from other research institutes are also mentioned. Analogy with through-silicon-via technology is drawn. This article aims at giving hints of the technology improvements implemented to upgrade from a R&D process to a mature technology., This work has been financed by the Spanish Ministry of Science and Innovation (MICIN) through the Particle Physics National Program (RTI2018-094906-B-C22 and FPA2017-85155-C4-2-R) and by the European Union’s Horizon 2020 Research and Innovation funding program, under Grant Agreement No. 654168 (AIDA-2020). All the manufacturing were performed at the IMB-CNM clean room facilities, member of the Spanish ICTS Network MICRONANOFABS partially supported by MICIN and FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Measurements on last IMBLGADs production

  • Villegas, Jairo
  • Hidalgo, Salvador
  • Merlos Domingo, Ángel
  • Moffat, Neil
  • Pellegrini, Giulio
  • Fernández-García, Marcos
  • Jaramillo, R.
  • Navarrete Ramos, Efrén
  • Sikdar, A. K.
  • Vila, Iván
Trabajo presentado al 40th RD50 Workshop on Radiation hard semiconductor devices for very high luminosity colliders, celebrado del 21 al 24 de junio de 2022 en el CERN (Zurich)., In this contribution we will present the first measurements on LGADs corresponding to our CNM’s second engineering run based on 6-inch, 50µm active layer thick, epitaxial wafers (6LG3 technology). Some of the wafers were carbon enriched using two different doses and one implantation energy. For the gain layer, samples were fabricated using different boron doses and diffusion times and one implantation energy. Measurements, simulations and analysis of breakdown and depletion voltages were carried out on these LGADs. The presented results will serve as a stepping stone to select the best technological parameters for the gain and carbon layer definition in the upcoming ATLAS-CMS common run, based on 6-inch Si-Si wafers (6LG2 technology)., This work has been financed by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) and by the European Union’s FEDER program “a way of making Europe”. Project references: RTI2018094906 BC22 and PID2020113705RBC32, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inverse LGAD (iLGAD) Periphery Optimization for Surface Damage Irradiation

  • Doblas, Albert
  • Flores, David
  • Hidalgo, Salvador
  • Moffat, Neil
  • Pellegrini, Giulio
  • Quirion, David
  • Villegas, Jairo
  • Maneuski, Dzmitry
  • Ruat, Marie
  • Fajardo, Pablo
Pixelated LGADs have been established as the baseline technology for timing detectors for the High Granularity Timing Detector (HGTD) and the Endcap Timing Layer (ETL) of the ATLAS and CMS experiments, respectively. The drawback of segmenting an LGAD is the non-gain area present between pixels and the consequent reduction in the fill factor. To overcome this issue, the inverse LGAD (iLGAD) technology has been proposed by IMB-CNM to enhance the fill factor and provide excellent tracking capabilities. In this work, we explore the use of iLGAD sensors for surface damage irradiation by developing a new generation of iLGADs, the periphery of which is optimized to improve the performance of irradiated sensors. The fabricated iLGAD sensors exhibit good electrical performances before and after X-ray irradiation., This work has been funded by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) and by the European Union’s ERDF program “A way of making Europe”. Grant references: RTI2018-094906-B-C22 and PID2020-113705RB-C32. Also, it was funded by the European Union’s Horizon 2020 Research and Innovation funding program, under Grant Agreement No. 101004761 (AIDAInnova), and by the European Synchrotron Radiation Facility (ESRF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gain measurements on NLGAD detectors

  • Villegas, Jairo
  • Moffat, Neil
  • Maneuski, Dzmitry
  • Ferrer, Oscar
  • Pellegrini, Giulio
  • Hidalgo, Salvador
In the last few years, Low Gain Avalanche Detectors (LGAD) have demonstrated their outstanding performance when detecting high-energy charged particles. However, due to the difference in the multiplication mechanism for holes and electrons, the detection performance for low penetrating particles (e.g low-energy protons or soft x-rays) is significantly reduced. A novel design of an LGAD detector, the NLGAD, was designed and fabricated at CNM to overcome this drawback. A qualitative description of the NLGAD concept is presented in this work, along with gain response measurements of the first prototypes under visible light of 660 nm and 15 keV x-rays. Additionally, a review of the gain response under visible light of 404 nm and IR light of 1064 nm, previously studied, is also evaluated in this work. The results demonstrate that the NLGAD concept has the potential to detect low penetrating particles., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel 3D Pixel Sensors for the Upgrade of the ATLAS Inner Tracker

  • Terzo, Stefano
  • Boscardin, Maurizio
  • Carlotto, Juan
  • Dalla Betta, Gian Franco
  • Darbo, Giovanni
  • Dorholt, Ole
  • Ficorella, Francesco
  • Gariano, Giuseppe
  • Gemme, Claudia
  • Giannini, Giulia
  • Grinstein, Sebastian
  • Heggelund, Andreas
  • Huiberts, Simon
  • Kok, Angela
  • Koybasi, Ozhan
  • Lapertosa, Alessandro
  • Lauritzen, Magne Elk
  • Manna, Maria
  • Mendicino, Roberto
  • Oide, Hideyuki
  • Pellegrini, Giulio
  • Povoli, Marco
  • Quirion, David
  • Rohne, Ole Myren
  • Ronchin, Sabina
  • Sandaker, Heidi
  • Abdulla Samy, Md Arif
  • Stugu, Bjarne
  • Vannoli, Leonardo
The ATLAS experiment will undergo a full replacement of its inner detector to face the challenges posed by the High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The new Inner Tracker (ITk) will have to deal with extreme particle fluences. Due to its superior radiation hardness the 3D silicon sensor technology has been chosen to instrument the innermost pixel layer of ITk, which is the most exposed to radiation damage. Three foundries (CNM, FBK, and SINTEF), have developed and fabricated novel 3D pixel sensors to meet the specifications of the new ITk pixel detector. These are produced in a single-side technology on either Silicon On Insulator (SOI) or Silicon on Silicon (Si-on-Si) bonded wafers by etching both n- and p-type columns from the same side. With respect to previous generations of 3D sensors they feature thinner active substrates and smaller pixel cells of 50 × 50 and 25 × 100 µm2. This paper reviews the main design and technological issues of these novel 3D sensors, and presents their characterization before and after exposure to large radiation doses close to the one expected for the innermost layer of ITk. The performance of pixel modules, where the sensors are interconnected to the recently developed RD53A chip prototype for HL-LHC, has been investigated in the laboratory and at beam tests. The results of these measurements demonstrate the excellent radiation hardness of this new generation of 3D pixel sensors that enabled the project to proceed with the pre-production for the ITk tracker., The authors would like to thank A. Rummler, M. Bomben, J. Lange and the other ATLAS ITk beam test participants for great support and discussions at the beam test as well as A. Dierlamm and F. Bögelspacher (KIT), K. Nakamura (CYRIC), L. Gonella and A. Hunter (University of Brimingham), V. Cindro (JSI) for the excellent support with the irradiation at the different facilities. The measurements leading to these results have been partially performed at the Test Beam Facility at DESY Hamburg (Germany), a member of the Helmholtz Association (HGF)., This work was partially funded by: MINECO, Spanish Government, under grants RTI2018-094906-B-C21, RTI2018-094906-B-C22 and SEV-2016-0588 (Severo Ochoa excellence programme); the Italian National Institute for Nuclear Physics (INFN), Projects RD_FASE2 and FASE2_ATLAS (CSN1); and by the H2020 project AIDA-2020, GA no. 654168., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Gain measurements on NLGAD detectors, Jairo Villegas, Neil Moffat, Dzmitry Maneuski, Oscar Ferrer, Giulio Pellegrini, Salvador Hidalgo, Gain measurements on NLGAD detectors [Data management plan]; versión 1

  • Villegas, Jairo
  • Moffat, Neil
  • Manueski, Dzmitry
  • Ferrer, Oscar
  • Pellegrini, Giulio
  • Hidalgo, Salvador
There will not be restrictions to use the generated data after its publication, but external users will be asked to cite the source and/or the papers properly, and the redistribution of the data must be authorized by the researcher/supervisor. The identity of the person accessing the data will be ascertained with the following questionnaire, there won't be a need for a data access committee, Raw data obtained with nLGAD silicon detectors fabricated at IMB-CNM-CSIC for the paper: "Gain measurements on NLGAD detectors”, Spanish Ministry of Science, Innovation and Universities (MICIU/AEI/10.13039/501100011033/) and by the European Union’s ERDF program “A way of making Europe”. Grant references: RTI2018-094906-B-C22 and PID2020-113705RB-C32. European Union’s Horizon 2020 Research and Innovation. Grant Agreement No. 101004761 (AIDAInnova)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A graphene-on-silicon photodetector for low penetrating radiation

  • Moffat, Neil
  • Soto-Oton, J. A.
  • Rius, Gemma
  • Cabruja Casas, Enric
  • Pellegrini, Giulio
We introduce an innovative graphene-on-silicon photodiode designed for low penetrating radiation. Its standout feature lies in its remarkably-thin dead layer in the entrance window, setting it apart from existing photodetectors. Conventional photodetectors suffer from sensitivity limitations in the low wavelength or energy, respectively, for light or particles, due to their shallow penetration depth. Most conventional photodiodes employ a junction implant which suffers from recombination of low-penetrating photons/particles within the dead layer. Instead, we utilise the nearly transparent properties of single-layer graphene to create a depletion layer that minimises the dead layer. We combine a single junction ring (highly doped [Formula: see text] bias ring) with single-layer graphene. The graphene acts as a field plate, extended over the junction ring and covering the entire entrance window (5×5 [Formula: see text] active area), while being electrically isolated by an ultrathin, high K dielectric layer. In operation, the photodiode undergoes depletion upon applying a reverse bias as expected, which primarily occurs within the region beneath the field plate. We conducted Transient Current Technique measurements as the best method to assess the charge collection uniformity of the device. Remarkably, the results reveal a consistent total 100% uniformity across the entire detector area. Nevertheless, while the collection time is position-dependent, increasing as the laser incidence point moves farther away from the bias ring, responsivity measurements show excellent response in both the deep ultra violet and vacuum ultra violet regions with ≥ 100% external quantum efficiency at wavelengths below 150 nm., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been financed by the Spanish Ministry of Science and Innovation (MICIN) through the Particle Physics National Program RTI2018-094906-B-C22. This work was also supported by Ayudas Ramon y Cajal, Grant Ref. RYC-2016-21412 and this work has been financed by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033/) Project references: SPID202000X118404SV1, PID2020-118275RB-C22, PID2021-124660OB-C22, PDC2023-145815-C22. This work has received funding by the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 101004761. All the manufacturing was performed at the IMB-CNM clean room facilities, member of the Spanish ICTS Network MICRONANOFABS partially supported by MICIN and FEDER funds. The authors thank the Experimental Neutrino Group at IFIC (CSIC–UV), Spain, for providing access to their optical laboratory and equipment, acquired with the support of the Ministerio de Ciencia, Innovación y Universidades (MICIN) and funding from the European Union NextGenerationEU (PRTR-C17.I01), as well as the Generalitat Valenciana, Project (IFIC-NuLight), ASFAE/2022/029., Peer reviewed