Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new model of electromechanical relays for predicting the motion and electromagnetic dynamics

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
In this paper, a novel multiphysics and nonlinear model for electromechanical relays is presented. The electromagnetic dynamics is analyzed by calculating the total reluctance of the magnetic equivalent circuit (MEC), which is composed of a fixed length iron core and an angular air gap. Magnetic saturation and angular dependency of the reluctance are considered in the analysis. Then, an energy balance over the electromagnetic components of the system is used to obtain the torque which drives the movable armature. A planar mechanism of four rigid bodies, including spring-damping torques that restrict the motion and model the contact bounces that occur in the switchings, is proposed to explain the dynamics of the movable components. Experimental tests show the accuracy of the model in both the electromagnetic and the mechanical parts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new run-to-run approach for reducing contact bounce in electromagnetic switches

  • Ramírez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
Contact bounce is probably the most undesirable phenomenon of electromagnetic switches. It reduces the performance of relays and contactors and is directly related to some of the processes that result in the destruction of the device. In this paper, a complete formulation of the problem is provided and a new strategy inspired by Runto-Run control is presented for reducing contact bounce. The method, which makes use of the repetitive functioning of these systems, is highly versatile and may be applied to different switches under diverse operating conditions. In addition, it is able to deal with changes during the service life of the device, such as plastic deformations or the erosion of the contacts. Several experimental results are included to prove the effectiveness of the method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Probability-Based Optimal Control Design for Soft Landing of Short-Stroke Actuators

  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
The impact forces during switching operations of short-stroke actuators may cause bouncing, audible noise, and mechanical wear. The application of soft-landing control strategies to these devices aims at minimizing the impact velocities of their moving components to ultimately improve their lifetime and performance. In this brief, a novel approach for soft-landing trajectory planning, including probability functions, is proposed for optimal control of the actuators. The main contribution of the proposal is that it considers the uncertainty in the contact position, and hence, the obtained trajectories are more robust against system uncertainties. The problem is formulated as an optimal control problem and transformed into a two-point boundary value problem for its numerical resolution. Simulated and experimental tests have been performed using a dynamic model and a commercial short-stroke solenoid valve. The results show a significant improvement in the expected velocities and accelerations at contact with respect to past solutions in which the contact position is assumed to be perfectly known.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nonlinear Bounded State Estimation for Sensorless Control of an Electromagnetic Device

  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
  • Ramirez-Laboreo, Edgar
  • Llorente, Sergio
This paper presents a novel nonlinear state observer with discrete-time measurements for estimating the plunger position of linear travel solenoid valves. The observer is an unscented Kalman filter (UKF) for nonlinear systems that iteratively calculates an estimated mean and covariance of the state. It is based on a basic lumped parameter model, which contributes to the computational efficiency of the observer and facilitates its implementation. The magnetic reluctance is modeled taking into account the magnetic saturation and is partly defined by data obtained from finite element analysis (FEA). Boundary constraints are added to the estimated position to prevent it from surpassing its physical limits. Different tests performed with simulated and experimental data show that the estimations are accurate and robust to noise and model inaccuracies. Besides, although the observer has been developed for a specific device, the method can be easily extended to other electromechanical systems in which the position needs to be estimated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid dynamical model for reluctance actuators including saturation, hysteresis and eddy currents

  • Ramirez-Laboreo, Edgar
  • Roes, Maurice G. L.
  • Sagues, Carlos
A novel hybrid dynamical model for single-coil, short-stroke reluctance actuators is presented in this paper. The model, which is partially based on the principles of magnetic equivalent circuits, includes the magnetic phenomena of hysteresis and saturation by means of the generalized Preisach model. In addition, the eddy currents induced in the iron core are also considered, and the flux fringing effect in the air is incorporated by using results from finite element simulations. An explicit solution of the dynamics without need of inverting the Preisach model is derived, and the hybrid automaton that results from combining the electromagnetic and motion equations is presented and discussed. Finally, an identification method to determine the model parameters is proposed and experimentally illustrated on a real actuator. The results are presented and the advantages of our modeling method are emphasized.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Real-time electromagnetic estimation for reluctance actuators

  • Ramírez Laboreo, E.
  • Moya Lasheras, E.
  • Sagues, C.
Several modeling, estimation, and control strategies have been recently presented for simple reluctance devices like solenoid valves and electromagnetic switches. In this paper, we present a new algorithm to online estimate the flux linkage and the electrical time-variant parameters of these devices, namely the resistance and the inductance, only by making use of discrete-time measurements of voltage and current. The algorithm, which is robust against measurement noise, is able to deal with temperature variations of the device and provides accurate estimations during the motion of the armature. Additionally, an integral estimator that uses the start of each operation of the actuator as reset condition has been also implemented for comparative purposes. The performances of both estimation methods are studied and compared by means of simulations and experimental tests, and the benefits of our proposal are emphasized. Possible uses of the estimates and further modeling developments are also described and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reluctance actuator characterization via FEM simulations and experimental tests

  • Ramirez-Laboreo, E.
  • Sagues, C.
Modeling the reluctance of an electromagnetic actuator is a critical step to analyze its dynamics and design model-based controllers. On the one hand, analytical expressions based on either theoretical or empirical models often lack accuracy due to model inconsistencies. On the other, numerical methods are much more precise but require exact information about the system geometry, materials and winding configuration. In this paper we present a new method that brings together the good properties of the finite element method and of system identification techniques to obtain an accurate description of the reluctance and its derivative. Since the method is designed to identify the unknown parameters of the system, it is particularly well suited for modeling existing commercial devices. An application on a safety valve used in gas lines is included to illustrate the method and a discussion on the results shows the advantages of our proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Model-free sliding-mode controller for soft landing of reluctance actuators

  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
Some electromagnetic actuators suffer from high velocity impacts during non-controlled switching operations, which cause contact bouncing, mechanical wear, and acoustic noise. Soft-landing control strategies aim at minimizing the impact velocities of these devices to improve their performance. This paper presents a sliding-mode controller for soft landing of single-coil reluctance actuators. It is a switching model-free controller, which results in a very simple implementation. A generalized dynamical hybrid model of an actuator is utilized for deriving the robustness condition, based on the Lyapunov theory. Then, the condition is evaluated for a dynamical model, based on a commercial device, and several reference trajectories. Finally, the controller performance is validated through simulations. The effect of the sampling rate on the resulting impact velocities is also analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design of a perfect-tracking soft-landing controller for electromagnetic switching devices

  • Ramirez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromagnetic switching devices such as electromechanical relays and solenoid valves suffer from impacts and mechanical wear when they are activated using a constant-voltage policy. This paper presents a new control approach that aims at achieving soft landing in these devices, i.e., a movement without neither impacts nor bouncing. The hybrid nonlinear dynamics of the system is firstly described taking into account the limited range of motion that characterizes this class of devices. Then, the nonlinear expression of the control law is derived and a method to design a soft-landing reference trajectory is proposed. It is shown that, when certain conditions are met, the design methodology presented in the paper results in a controller that achieves perfect tracking of the reference trajectory and, hence, soft landing is accomplished. The theoretical analysis is validated by simulation using a dynamical model of a specific switching device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the Stability of Electromechanical Switching Devices

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Moya-Lasheras, Eduardo
  • Serrano-Seco, Eloy
Electromagnetic relays and solenoid actuators are commonly used for their bistable behavior, which allows for switching between two states in electrical, pneumatic, or hydraulic circuits, among other applications. Although there has been extensive research on modeling, estimation, and control of these electromechanical systems, a gap remains in the analysis area. This article addresses this gap by presenting an equilibrium and stability analysis to gain deeper insight into their bistability. This analysis leverages a hybrid dynamical model to obtain analytical expressions that relate the physical parameters to the switching conditions. These expressions are useful, e.g., for fundamental understanding, quick analyses, or design optimization. The results are discussed in depth and potential practical applications are explored. Finally, the analysis is validated with experimental results from a real device.