Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Inverse modeling of pan heating in domestic cookers

  • Sanz-Serrano, F.
  • Sagues, C.
  • Llorente, S.
The heating uniformity of the cooking vessels in domestic stoves depends on the type of heat source (induction, electric resistance, gas burner, etc.) and of the way in which the power is transferred to the pan. The evaluation of the stove functionalities is currently carried out by the manufacturers with costly experimental tests with real food, which are an important phase of the design process for the improvement of their performance in the food elaboration. In order to help to design the cookers and avoid the expensive tests, it is interesting to know how the heating power is distributed in each situation, so that the cookers can be adapted to obtain a more uniform heating. The contribution of this work is an inverse thermal model for the three aforementioned technologies of domestic cookers, which allows the calculation of the power distribution generated in the bottom of the pan from the measurement of the surface temperature. The results show that the proposed inverse model is of interest in many practical situations and can be used under diverse conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of composition on the environmental impact of a cast aluminum alloy

  • Gómez, Patricia
  • Elduque, Daniel
  • Sarasa, Judith
  • Pina, Carmelo
  • Javierre, Carlos
The influence of alloy composition on the environmental impact of the production of six aluminum casting alloys (Al Si12Cu1(Fe), Al Si5Mg, Al Si9Cu3Zn3Fe, Al Si10Mg(Fe), Al Si9Cu3(Fe)(Zn) and Al Si9) has been analyzed. In order to perform a more precise environmental impact calculation, Life Cycle Assessment (LCA) with ReCiPe Endpoint methodology has been used, with the EcoInvent v3 AlMg3 aluminum alloy dataset as a reference. This dataset has been updated with the material composition ranges of the mentioned alloys. The balanced, maximum and minimum environmental impact values have been obtained. In general, the overall impact of the studied aluminum alloys varies from 5.98 ˆ 10 ´1 pts to 1.09 pts per kg, depending on the alloy composition. In the analysis of maximum and minimum environmental impact, the alloy that has the highest uncertainty is AlSi9Cu3(Fe)(Zn), with a range of ¿9%. The elements that contribute the most to increase its impact are Copper and Tin. The environmental impact of a specific case, an LED luminaire housing made out of an Al Si12Cu1(Fe) cast alloy, has been studied, showing the importance of considering the composition. Significant differences with the standard datasets that are currently available in EcoInvent v3 have been found.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dynamic heat and mass transfer model of an electric oven for energy analysis

  • Ramirez-Laboreo, E.
  • Sagues, C.
  • Llorente, S.
In this paper, a new heat and mass transfer model for an electric oven and the load placed inside is presented. The developed model is based on a linear lumped parameter structure that differentiates the main components of the appliance and the load, therefore reproducing the thermal dynamics of several elements of the system including the heaters or the interior of the product. Besides, an expression to estimate the water evaporation rate of the thermal load has been developed and integrated in the model so that heat and mass transfer phenomena are made interdependent. Simulations and experiments have been carried out for different cooking methods, and the subsequent energy results, including energy and power time-dependent distributions, are presented. The very low computational needs of the model make it ideal for optimization processes involving a high number of simulations. This feature, together with the energy information also provided by the model, will permit the design of new ovens and control algorithms that may outperform the present ones in terms of energy efficiency.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Reduced-Order Model of a Half-Bridge Series Resonant Inverter for Power Control in Domestic Induction Heating Applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín, A.
  • Urriza, I.
  • Navarro, D.
When modeling resonant inverters considering the harmonic balance method, the order of the obtained transfer functions is twice the state variables number. This is explained because two components are considered for each state variable. In order to obtain a simpler transfer function model of a halfbridge series resonant inverter, different techniques of model order reduction have been considered in this work. Thus, a reduced-order model has been obtained by residualization providing much simpler analytical expressions than the original model. The proposed model has been validated by simulation and experimentally. The validity range of the proposed model is extended up to a tenth of the switching frequency. Taking into account the great load variability of induction heating applications, the proposed reduced-order model will allow the design of advanced controllers such as Gain-Scheduling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduced-order models of series resonant inverters in induction heating applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín Acín, Aránzazu
  • Urriza, I.
  • Navarro, D.
From the controller design framework, a simple analytical model that captures the dominant behavior in the range of interest is the optimal. When modeling resonant circuits, complex mathematical models are obtained. These high-order models are not the most suitable for controller design. Although some assumptions can be made for simplifying these models, variable frequency operation or load uncertainty can make these premises no longer valid. In this work, a systematic modeling order reduction technique, Slowly Varying Amplitude and Phase (SVAP), is considered for obtaining simpler analytical models of resonant inverters. SVAP gives identical results as the classical model-order residualization technique from automatic control theory. A slight modification of SVAP, Slowly Varying Amplitude Derivative and Phase (SVADP) is applied in this paper to obtain a better validity range. SVADP is validated for a half-bridge series resonant inverter (HBSRI) and for a high- order plant, a dual-half bridge series resonant inverter (DHBSRI) giving analytical second-order transfer functions for both topologies. Simulation and experimental results are provided to show the validity range of the reduced-order models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and Implementation of a Test-Bench for Efficiency Measurement of Domestic Induction Heating Appliances

  • Serrano, Javier
  • Acero, Jesús
  • Alonso, Rafael
  • Carretero, Claudio
  • Lope, Ignacio
  • Burdío, José Miguel
The operation of a domestic induction cooktop is based on the wireless energy transfer from the inductor to the pot. In such systems, the induction efficiency is defined as the ratio between the power delivered to the pot and the consumed power from the supplying converter. The non-transferred power is dissipated in the inductor, raising its temperature. Most efficiency-measuring methods are based on measuring the effective power (pot) and the total power (converter output). While the converter output power is directly measurable, the measurement of the power dissipation in the pot is usually a cause of inaccuracy. In this work, an alternative method to measure the system’s efficiency is proposed and implemented. The method is based on a pot with a reversible base to which the inductor is attached. In the standard configuration, the inductor is placed below the pot in such a way that the delivered power is used to boil water, and the power losses are dissipated to the air. When the pot base is flipped, the inductor is immersed into the water. In this case the losses in the inductor also contribute to heating up and boiling the water. The induction efficiency is calculated from the boiling rates in both configurations. A commercial inductor was tested under real working conditions with consistent results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new model of electromechanical relays for predicting the motion and electromagnetic dynamics

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
In this paper, a novel multiphysics and nonlinear model for electromechanical relays is presented. The electromagnetic dynamics is analyzed by calculating the total reluctance of the magnetic equivalent circuit (MEC), which is composed of a fixed length iron core and an angular air gap. Magnetic saturation and angular dependency of the reluctance are considered in the analysis. Then, an energy balance over the electromagnetic components of the system is used to obtain the torque which drives the movable armature. A planar mechanism of four rigid bodies, including spring-damping torques that restrict the motion and model the contact bounces that occur in the switchings, is proposed to explain the dynamics of the movable components. Experimental tests show the accuracy of the model in both the electromagnetic and the mechanical parts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analytical solution of the induced currents in multilayer cylindrical conductors under external electromagnetic sources

  • Acero, J.
  • Carretero, C.
  • Lope, I.
  • Alonso, R.
  • Burdío, J.M.
We present a closed-form solution for the induced losses in round conductors consisting of several concentric layers. The geometry under study corresponds to an infinitely-long and isolated multilayer cylinder where layers can have different electromagnetic properties and the number of layers is not restricted. The multilayer conductor is under an external time-varying magnetic field which induces currents and, accordingly, generates Joule dissipation. Total induced losses are obtained by integrating the losses of each layer. Mathematical expressions of the current distribution in each layer are derived from the solution of Maxwell''s equations. These expressions consist of a combination of Bessel functions of different kinds and orders. The current distribution in a particular layer not only depends on the properties of the layer but also on the properties of the rest of layers. Consequently, matrix formalism is adopted for describing current distribution of layers. Matrix description is numerically solved and results are compared with finite element simulations for different arrangements and cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental assessment tool to analyse the presence of critical and valuable raw materials

  • Gómez Bachiller, Patricia
  • Pina, Carmelo
  • Elduque, Daniel
  • Clavería, Isabel
  • Javierre, Carlos
  • Sarasa, Judith
The aim of this paper is show the software 'Sustainable Electronics' (SE), developed in the University of Zaragoza as an environmental impact assessment tool, specially developed to design components taking into account the presence of critical and valuable raw materials consumption; simulating environmental impact and measuring the overall raw material consumption, taking into account material composition of the electronic components. It considers raw material acquisition, manufacturing processes, transports and end of life. This software allows us to easily update and use the datasets provided by Life Cycle Inventory databases, such as, for example, EcoInvent, developed by the Swiss Centre for Life Cycle Inventories. The methodology has been tested through the software in an electronic board of a touch control used in an induction hob. As result, it has been obtained that there is a high consumption of materials such as copper, tin or aluminium.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A new run-to-run approach for reducing contact bounce in electromagnetic switches

  • Ramírez-Laboreo, Edgar
  • Sagues, Carlos
  • Llorente, Sergio
Contact bounce is probably the most undesirable phenomenon of electromagnetic switches. It reduces the performance of relays and contactors and is directly related to some of the processes that result in the destruction of the device. In this paper, a complete formulation of the problem is provided and a new strategy inspired by Runto-Run control is presented for reducing contact bounce. The method, which makes use of the repetitive functioning of these systems, is highly versatile and may be applied to different switches under diverse operating conditions. In addition, it is able to deal with changes during the service life of the device, such as plastic deformations or the erosion of the contacts. Several experimental results are included to prove the effectiveness of the method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and optimization of the efficiency of induction heating applications with litz-wire planar and solenoidal coils

  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
Optimization of the efficiency of an induction heating application is essential in order to improve both reliability and performance. For this purpose, multi-stranded cables with litz structure are often used in induction heating applications. This paper presents an analysis and optimization of the efficiency of induction heating systems focusing on the optimal copper volume of the winding with respect to different constraints. The analysis is based on the concept of a one-strand one-turn coil, which captures the dissipative effects of an induction heating system and reduces the number of variables of the analysis. An expression for the efficiency of the induction heating system is derived. It is found that, with the geometry and the other parameters of the system fixed, efficiency depends on the copper volume of the windings. In order to use this result to optimize the efficiency of an application, volume restrictions, the packing factor and the window utilization factor are also considered. The optimum frequency for an induction heating system is also studied in this work. An experimental verification for both planar and solenoidal cases is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modeling of pancake frying with non-uniform heating source applied to domestic cookers

  • Sanz-Serrano, F.
  • Sagues, C.
  • Feyissa, A. H.
  • Adler-Nissen, J.
  • Llorente, S.
The design of domestic cooking stoves is usually optimized by performing time-consuming cooking experiments, often using frying of pancakes as a standard. Simulation of cooking processes may reduce the number of experiments used in the development of the cooking stoves, saving time and resources. In this work we propose a model of contact frying of pancakes in domestic cookers, particularly in induction hobs and radiant cookers, in which the heating of the cooking vessels can be non-uniform. This non-uniformity is unavoidable in practice, but it can be reduced by optimizing the design of the cooker. The proposed model combines heat and mass transfer phenomena, and also includes the correlation between the browning development and the temperature distribution, the local water content and the cooking time. The model has been also validated through experiments using a commercial induction hob and a radiation stove. With this model the color of the cooked pancakes can be predicted, taking into account also uneven heating, and through simulations the design of the cooker can be improved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and design of tubular coils for wireless inductive power transfer systems

  • Acero, J.
  • Serrano, J.
  • Carretero, C.
  • Lope, I.
  • Burdio, J.M.
We evaluate copper tubes as alternative of litz wire for planar coils of inductive power transfer (IPT) systems. For this purpose, a design methodology focused on maximizing the product of the magnetic coupling and the quality factor is proposed. The methodology is based on a combination of FEA simulations and analytical calculations of the skin and proximity losses in the tube. Analytical calculations are based on solutions of Maxwell''s equations for a tubular geometry. These solutions are oriented to extract both skin and proximity losses in the tube. Performance of a prototype of 1.5 kW is evaluated and compared with a conventional litz-wire implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the Composition on the Environmental Impact of Soft Ferrites

  • Gómez, Patricia
  • Elduque, Daniel
  • Pina, Carmelo
  • Javierre, Carlos
The aim of this paper is to analyze the influence of the composition on the environmental impact of the two main types of soft ferrites, allowing scientists and engineers to compare them based not only on cost and properties, but also on an environmental point of view. Iron oxides are the basis of soft ferrites, but these ferrites have a wide range of compositions, using materials such as manganese or nickel, which affect their magnetic properties, but also modify the environmental impact. A Life Cycle Assessment has been carried out for manganese-zinc (MnZn) and nickel-zinc (NiZn) soft ferrites, with a Monte Carlo approach to assess multiple compositions. The LCA model was developed with SimaPro 8.4, using the EcoInvent v3.4 life cycle inventory database. Environmental impact values were calculated under the ReCiPe and Carbon Footprint methodologies, obtaining a broad variety of results depending on the composition. The results were also significantly different from the standard EcoInvent ferrite. For the analyzed soft ferrites, the presence of manganese or nickel is a key factor from an environmental perspective, as these materials involve high environmental impacts, and their supply risk has increased during recent years, making them a concern for European manufacturers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electricity consumption estimation of the polymer material injection-molding manufacturing process: empirical model and application

  • Elduque, Ana
  • Elduque, Daniel
  • Pina, Carmelo
  • Clavería, Isabel
  • Javierre, Carlos
Polymer injection-molding is one of the most used manufacturing processes for the production of plastic products. Its electricity consumption highly influences its cost as well as its environmental impact. Reducing these factors is one of the challenges that material science and production engineering face today. However, there is currently a lack of data regarding electricity consumption values for injection-molding, which leads to significant errors due to the inherent high variability of injection-molding and its configurations. In this paper, an empirical model is proposed to better estimate the electricity consumption and the environmental impact of the injection-molding process. This empirical model was created after measuring the electricity consumption of a wide range of parts. It provides a method to estimate both electricity consumption and environmental impact, taking into account characteristics of both the molded parts and the molding machine. A case study of an induction cooktop housing is presented, showing adequate accuracy of the empirical model and the importance of proper machine selection to reduce cost, electricity consumption, and environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-Performance and Cost-Effective ZCS Matrix Resonant Inverter for Total Active Surface Induction Heating Appliances

  • Sarnago, H.
  • Burdio, J.M.
  • Lucia, O.
Flexible cooking surfaces represent the most innovative and high-performance induction heating appliances nowadays. This paper presents a multiple-output resonant inverter for multicoil systems featuring high efficiency and flexible output power control for modern induction heating appliances. By adopting a matrix structure, the number of controlled devices can be significantly reduced while high control versatility is ensured. The proposed converter is first analyzed and, in order to prove the feasibility of the proposal, a multiple-output prototype is designed and implemented. The experimental results prove the correct converter operation and output power control with multiple induction heating loads, validating the proposed approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A versatile resonant tank identificationm methodology for induction heating systems

  • Sarnago, H.
  • Lucía, O.
  • Burdio, J.M.
Induction heating has become the most advance heating process due to benefits, such as efficiency, performance, cleanness, and safety. In this process, the electromagnetic coupling between the induction coil and the induction target is a key, determining the heating performance as well as the resonant power converter operation. This letter proposes an accurate and cost-effective resonant tank identification method applied to induction heating systems. It is based on monitoring the resonant capacitor voltage in order to calculate the resonant tank quality factor. The proposed methodology has been tested using a versatile power electronics test bench applied to domestic induction heating, proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cooperative Periodic Coverage With Collision Avoidance

  • Palacios-Gasos, J.M.
  • Montijano, E.
  • Sagues, C.
  • Llorente, S.
In this paper, we propose a periodic solution to the problem of persistently covering a finite set of interest points with a group of autonomous mobile agents. These agents visit periodically the points and spend some time carrying out the coverage task, which we call coverage time. Since this periodic persistent coverage problem is NP-hard, we split it into three subproblems to counteract its complexity. In the first place, we plan individual closed paths for the agents to cover all the points. Second, we formulate a quadratically constrained linear program to find the optimal coverage times and actions that satisfy the coverage objective. Finally, we join together the individual plans of the agents in a periodic team plan by obtaining a schedule that guarantees collision avoidance. To this end, we solve a mixed-integer linear program that minimizes the time in which two or more agents move at the same time. Eventually, we apply the proposed solution to an induction hob with mobile inductors for a domestic heating application and show its performance with experiments on a real prototype. IEEE
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-Resonant Power Converter for Improved Dual-Frequency Induction Heating

  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Industrial induction heating is a key manufacturing process due to its benefits in terms of efficiency, cleanliness, and high performance. These has made possible the extension of this technology to a wide range of industries from automotive to aeronautic, domestic or renewable energies. One of the main challenges still present is the design of a high performance and cost-effective process for those induction targets with complex geometries exposed to the magnetic field, being the most representative example the gears present in most mechanical systems. Usually, in order to optimize the heating process, multi-frequency induction heating systems are used, being often expensive and/or difficult to tune and control. The aim of this paper is, consequently, to propose a family of power converters able to supply the inductor system with two simultaneous frequencies in order to improve the heating process of the induction target. The proposed converter takes advantage of a multi-resonant network allowing full control of the output power delivered at each frequency and, at the same time, a compact and cost-effective implementation. The proposed converter is analyzed, designed and implemented, and experimental verification of its operation is provided in this paper.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A flexible cooking zone composed of partially overlapped inductors

  • Serrano, J.
  • Acero, J.
  • Lope, I.
  • Carretero, C.
  • Burdio, J.M.
Domestic induction cookers are evolving from fixed cooking areas to flexible surfaces in such a way that the pot can be placed at any position. This implies the use of a larger number of reduced-sized inductors, which present a lower efficiency. As a solution to increase the efficiency while maintaining the flexibility, we propose the use of partially overlapped inductors of a larger size. This concept is currently in use in wireless power transfer systems, where the transmitter arrangement consists of several overlapped coils. The aim of this paper is to evaluate this concept applied to domestic induction heating appliances, with special emphasis in analyzing the effects of introducing the multicoil system with dissipative media. Moreover, the losses in the winding will be studied in detail. The system will be prototyped and tested, delivering up to 3.7 kW.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dimensional Stability and Process Capability of an Industrial Component Injected with Recycled Polypropylene

  • Galve, J.E.
  • Elduque, D.
  • Pina, C.
  • Clavería, I.
  • Acero, R.
  • Fernández, A.
  • Javierre, C.
The usage of recycled polymers for industrial purposes arises as one of the most promising methods of reducing environmental impact and costs associated with scrapping parts. This paper presents a systematic study of the dimensional stability of a raw and 100% recycled polypropylene subjected to realistic environmental conditions occurring along its working life. The component studied is an internal part of an induction hob assembly. Industrial samples manufactured with both materials, in the same mold, and in the same injection machine, are subjected to ejection conditions, storage conditions (50 °C), and extreme performance conditions (80 °C). Induced dimensional changes are registered and analyzed using a coordinate measuring machine, and a tactile sensing probe. To verify the process capability of the samples manufacturing, Cp and Cpk values are calculated to evaluate the suitability of the recycled material as an alternative. Results conclude that, although the use of recycled material implies slight differences in terms of dimensional stability due to the changes induced in the polymer structure, these differences are not significant enough to affect the injection process capability. Therefore, recycling arises as one effective method to reduce both overruns associated with the consumption of raw polypropylene material and its environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

DC-Gain Measurement of the Frequency-to-Output Power Transfer Function based on sidebands for Domestic Induction Heating Applications

  • Villa, J.
  • Artigas, J.I.
  • Barragan, L.A.
  • Dominguez, A.
  • Otin, A.
  • Urriza, I.
This paper analyzes different alternatives to obtain the dc gain of the frequency-to-output power transfer function of a series half-bridge resonant inverter for domestic induction heating. In this application, a full-wave rectified bus voltage usually feeds the inverter, and a constant switching frequency is applied during each half-period of the mains voltage. This dc gain is the derivative of the output power with respect to the frequency. A finite difference approximation to the derivative can be obtained measuring the output power during two consecutive half-periods of the mains voltage by injecting a small frequency increment in the second one. This paper compares five alternatives to estimate the gain in only one half-period of the mains, what would allow to increase the controller bandwidth. The alternatives are based on the computation of the DTFS of the sidebands. They are off-line implemented and experimentally verified. The proposed method can also be implemented in real time into a digital controller.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nonlinear Bounded State Estimation for Sensorless Control of an Electromagnetic Device

  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
  • Ramirez-Laboreo, Edgar
  • Llorente, Sergio
This paper presents a novel nonlinear state observer with discrete-time measurements for estimating the plunger position of linear travel solenoid valves. The observer is an unscented Kalman filter (UKF) for nonlinear systems that iteratively calculates an estimated mean and covariance of the state. It is based on a basic lumped parameter model, which contributes to the computational efficiency of the observer and facilitates its implementation. The magnetic reluctance is modeled taking into account the magnetic saturation and is partly defined by data obtained from finite element analysis (FEA). Boundary constraints are added to the estimated position to prevent it from surpassing its physical limits. Different tests performed with simulated and experimental data show that the estimations are accurate and robust to noise and model inaccuracies. Besides, although the observer has been developed for a specific device, the method can be easily extended to other electromechanical systems in which the position needs to be estimated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid dynamical model for reluctance actuators including saturation, hysteresis and eddy currents

  • Ramirez-Laboreo, Edgar
  • Roes, Maurice G. L.
  • Sagues, Carlos
A novel hybrid dynamical model for single-coil, short-stroke reluctance actuators is presented in this paper. The model, which is partially based on the principles of magnetic equivalent circuits, includes the magnetic phenomena of hysteresis and saturation by means of the generalized Preisach model. In addition, the eddy currents induced in the iron core are also considered, and the flux fringing effect in the air is incorporated by using results from finite element simulations. An explicit solution of the dynamics without need of inverting the Preisach model is derived, and the hybrid automaton that results from combining the electromagnetic and motion equations is presented and discussed. Finally, an identification method to determine the model parameters is proposed and experimentally illustrated on a real actuator. The results are presented and the advantages of our modeling method are emphasized.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Real-time electromagnetic estimation for reluctance actuators

  • Ramírez Laboreo, E.
  • Moya Lasheras, E.
  • Sagues, C.
Several modeling, estimation, and control strategies have been recently presented for simple reluctance devices like solenoid valves and electromagnetic switches. In this paper, we present a new algorithm to online estimate the flux linkage and the electrical time-variant parameters of these devices, namely the resistance and the inductance, only by making use of discrete-time measurements of voltage and current. The algorithm, which is robust against measurement noise, is able to deal with temperature variations of the device and provides accurate estimations during the motion of the armature. Additionally, an integral estimator that uses the start of each operation of the actuator as reset condition has been also implemented for comparative purposes. The performances of both estimation methods are studied and compared by means of simulations and experimental tests, and the benefits of our proposal are emphasized. Possible uses of the estimates and further modeling developments are also described and discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reluctance actuator characterization via FEM simulations and experimental tests

  • Ramirez-Laboreo, E.
  • Sagues, C.
Modeling the reluctance of an electromagnetic actuator is a critical step to analyze its dynamics and design model-based controllers. On the one hand, analytical expressions based on either theoretical or empirical models often lack accuracy due to model inconsistencies. On the other, numerical methods are much more precise but require exact information about the system geometry, materials and winding configuration. In this paper we present a new method that brings together the good properties of the finite element method and of system identification techniques to obtain an accurate description of the reluctance and its derivative. Since the method is designed to identify the unknown parameters of the system, it is particularly well suited for modeling existing commercial devices. An application on a safety valve used in gas lines is included to illustrate the method and a discussion on the results shows the advantages of our proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the material composition SMD diodes on their environmental impact

  • Pina C.
  • Elduque D.
  • Gómez P.
  • Sarasa J.
  • Javierre C.
The influence of the material composition of surface-mount device (SMD) diodes on the environment has been analysed in this research. This impact assessment has been performed by means of an environmental impact calculation through a life cycle assessment (LCA), in which the EcoInvent dataset has been updated and customised, generating a more precise environmental impact analysis by considering the exact material composition provided by several suppliers of diodes and also recycling during the production stage. Considering the EcoInvent diode dataset as a reference, variations from nearly 1640% to only 8.5% of the environmental impact have been achieved. For example, the impact per 1 g of SMD diodes can change the global warming potential from 292 g CO2 eq up to 354 g CO2 eq, whereas for abiotic depletion, values can change from 9.9 × 10-7 up to 1.9 × 10-4 kg Sb eq. The presence of critical raw materials such as antimony, cobalt, or magnesium, together with precious metals as gold or silver, highly influences the environmental impact values obtained, demonstrating the considerable influence on the environmental impact of the material composition of the SMD diodes analysed. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the material composition on the environmental impact of surface-mount device (SMD) transistors

  • Gómez, Patricia
  • Elduque, Daniel
  • Sarasa, Judith
  • Pina, Carmelo
  • Javierre, Carlos
The aim of this study is to better elucidate the influence of surface-mount device (SMD) transistor material composition on the environmental impact of such transistors. A life cycle assessment (LCA) has been performed in which the EcoInvent dataset was updated with material compositions provided by several manufacturers. The influence of the material composition has been studied, providing a more precise understanding of the environmental impact. The software used to develop the LCA model was SimaPro 8.0.3.14, developed by Pré Consultants. The LCA was calculated with the CML methodology. In addition, a life cycle inventory was developed using EcoInvent v3. The EcoInvent methodology was used as a comparison tool for information provided by the manufacturers in terms of environmental impact, thus improving transistor selection in electronics design. The environmental impact of an SMD transistor can vary substantially with respect to material composition. Raw material acquisition represent between 20.3% and 99.9% of the total impact in most environmental categories. By contrast, the environmental impact of each transistor created due to part production is usually lower. The lowest environmental impact comes from the end of life treatments, values for which are approximately 0.1%. This environmental impact study demonstrates the large influence of transistor material composition for those analyzed herein.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the material composition on the environmental impact of ceramic glasses

  • Gómez, Patricia
  • Elduque, Daniel
  • Clavería, Isabel
  • Pina, Carmelo
  • Javierre, Carlos
An exhaustive study of the influence of ceramic glass material composition on the environmental impact has been performed. In order to perform a more accurate calculation of the environmental impact a life cycle assessment (LCA) was implemented using real material composition of ceramic glasses. Employing a sequential X-rays Fluorescence spectrometer, the composition of several ceramic glasses were analyzed, as this information is not published by the manufacturers. The environmental impact results of each ceramic glass were surveyed using EcoInvent v3.4 data, and SimaPro 8.4 software, following ReCiPe Endpoint and Carbon Footprint methodologies. The importance of considering the composition on the LCA is shown, establishing significant differences among the analyzed glasses. Few variations in the quantity of material composition generate high differences on the environmental impact values, demonstrating the high influence of the material composition on the environmental impact. Elements such as tin, lithium, and titanium are the ones that generate the highest contribution on the environmental impact. In contrast, silica sand shows the lowest impact in both methodologies despite it supposes between 58% and 63% of their compositions. Others such as barite and magnesium, together with neodymium emerged in the composition of the studied ceramic glasses as they are considered Critical Raw Materials by the European Union, due to their supply risk and economic importance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Equitable persistent coverage of non-convex environments with graph-based planning

  • Palacios-Gasós, J.M.
  • Tardioli, D.
  • Montijano, E.
  • Sagüés, C.
In this article, we tackle the problem of persistently covering a complex non-convex environment with a team of robots. We consider scenarios where the coverage quality of the environment deteriorates with time, requiring every point to be constantly revisited. As a first step, our solution finds a partition of the environment where the amount of work for each robot, weighted by the importance of each point, is equal. This is achieved using a power diagram and finding an equitable partition through a provably correct distributed control law on the power weights. Compared with other existing partitioning methods, our solution considers a continuous environment formulation with non-convex obstacles. In the second step, each robot computes a graph that gathers sweep-like paths and covers its entire partition. At each planning time, the coverage error at the graph vertices is assigned as weights of the corresponding edges. Then, our solution is capable of efficiently finding the optimal open coverage path through the graph with respect to the coverage error per distance traversed. Simulation and experimental results are presented to support our proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and optimization of small inductors on extra-thin PCB for flexible cooking surfaces

  • Serrano, Javier
  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
  • Burdío, José Miguel
  • Alonso, Rafael
The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Non-planar overlapped inductors applied to domestic induction heating appliances

  • Serrano, Javier
  • Lope, Ignacio
  • Acero, Jesús
Domestic induction heating appliances are evolving from surfaces with three to five fixed cooking areas to flexible cooking zones. These are able to adapt to a number of vessels of any size and shape by using multiple coils. Some state-of-the-art induction systems make use of overlapped inductors in two layers, which combine the high efficiency of large inductors with the high flexibility of small adjacent coils. The main drawback of this concept is the unequal distance between different coils and the vessel, which implies that each coil presents a different impedance depending on its layer. This paper presents an induction system conformed by non-planar inductors. These inductors are designed in such a way that they can be assembled in overlapping structures while preserving equivalence among them, i.e. they all present the same impedance. The paper includes the FEM modeling of the non-planar coil, an analysis on the conductor''s losses and an experimental verification.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A comparative evaluation of SiC power devices for high performance domestic induction heating

  • Sarnago, H.
  • Lucía, O.
  • Burdío, J.M.
This paper presents a comparative evaluation of silicon carbide power devices for the domestic induction heating (IH) application, which currently has a major industrial, economic and social impact. The compared technologies include MOSFETs, normally on and normally off JFETs, as well as BJTs. These devices have been compared according to different figure-of-merit evaluating conduction and switching performance, efficiency, impact of temperature, as well as other driving and protection issues. To perform the proposed evaluation, a versatile test platform has been developed. As a result of this study, several differential features are identified and discussed, taking into account the pursued induction heating application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Soft-Stop Optimal Trajectory Control for Improved Performance of the Series Resonant Multi-Inverter for Domestic Induction Heating Applications

  • Lucia, O.
  • Sarnago, H.
  • Burdio, J.M.
Induction heating technology is leading technical advances in home appliances due to the benefits inherent to the contactless energy transfer including high efficiency, fast heating, safety, cleanness, and accurate control, among others. Recent design trends are focused on developing more versatile cooking appliances for an improved user performance. To achieve such implementations, new multicoil architectures and power converters must be developed. This paper proposes the series-resonant multiinverter as an efficient, versatile, and cost-effective alternative to supply multiinductor systems. One of the main design challenges is the high blocking voltage of power devices, which may compromise the converter performance. This paper proposes an optimized modulation strategy to reduce the maximum device voltage, enabling an optimized converter design with improved reliability and performance. The proposed modulation is analytically studied and tested using a multicoil induction heating converter prototype, proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interleaved resonant boost inverter featuring SiC module for high-performance induction heating

  • Sarnago, Héctor
  • Lucia, Óscar
  • Burdio, José Miguel
Induction heating (IH) has become the technology of choice in many industrial, domestic, and medical applications due to its high efficiency and performance. This paper proposes an interleaved resonant boost inverter featuring SiC three-phase module to achieve high efficiency and performance IH power supply. The proposed converter achieves high efficiency by reducing the current through the devices, while the use of an interleaved full-bridge configuration reduces input current ripple and provides additional control degrees. The proposed converter has been designed, implemented, and tested experimentally, proving the feasibility of this proposal.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.