Pasar al contenido principal

TECNOLOGIAS ELECTRONICAS Y ELECTROMAGNETICAS PARA INDUCCION PLANAR MULTI-CELDA

TEC2013-42937-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Reduced-Order Model of a Half-Bridge Series Resonant Inverter for Power Control in Domestic Induction Heating Applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín, A.
  • Urriza, I.
  • Navarro, D.
When modeling resonant inverters considering the harmonic balance method, the order of the obtained transfer functions is twice the state variables number. This is explained because two components are considered for each state variable. In order to obtain a simpler transfer function model of a halfbridge series resonant inverter, different techniques of model order reduction have been considered in this work. Thus, a reduced-order model has been obtained by residualization providing much simpler analytical expressions than the original model. The proposed model has been validated by simulation and experimentally. The validity range of the proposed model is extended up to a tenth of the switching frequency. Taking into account the great load variability of induction heating applications, the proposed reduced-order model will allow the design of advanced controllers such as Gain-Scheduling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduced-order models of series resonant inverters in induction heating applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín Acín, Aránzazu
  • Urriza, I.
  • Navarro, D.
From the controller design framework, a simple analytical model that captures the dominant behavior in the range of interest is the optimal. When modeling resonant circuits, complex mathematical models are obtained. These high-order models are not the most suitable for controller design. Although some assumptions can be made for simplifying these models, variable frequency operation or load uncertainty can make these premises no longer valid. In this work, a systematic modeling order reduction technique, Slowly Varying Amplitude and Phase (SVAP), is considered for obtaining simpler analytical models of resonant inverters. SVAP gives identical results as the classical model-order residualization technique from automatic control theory. A slight modification of SVAP, Slowly Varying Amplitude Derivative and Phase (SVADP) is applied in this paper to obtain a better validity range. SVADP is validated for a half-bridge series resonant inverter (HBSRI) and for a high- order plant, a dual-half bridge series resonant inverter (DHBSRI) giving analytical second-order transfer functions for both topologies. Simulation and experimental results are provided to show the validity range of the reduced-order models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and Implementation of a Test-Bench for Efficiency Measurement of Domestic Induction Heating Appliances

  • Serrano, Javier
  • Acero, Jesús
  • Alonso, Rafael
  • Carretero, Claudio
  • Lope, Ignacio
  • Burdío, José Miguel
The operation of a domestic induction cooktop is based on the wireless energy transfer from the inductor to the pot. In such systems, the induction efficiency is defined as the ratio between the power delivered to the pot and the consumed power from the supplying converter. The non-transferred power is dissipated in the inductor, raising its temperature. Most efficiency-measuring methods are based on measuring the effective power (pot) and the total power (converter output). While the converter output power is directly measurable, the measurement of the power dissipation in the pot is usually a cause of inaccuracy. In this work, an alternative method to measure the system’s efficiency is proposed and implemented. The method is based on a pot with a reversible base to which the inductor is attached. In the standard configuration, the inductor is placed below the pot in such a way that the delivered power is used to boil water, and the power losses are dissipated to the air. When the pot base is flipped, the inductor is immersed into the water. In this case the losses in the inductor also contribute to heating up and boiling the water. The induction efficiency is calculated from the boiling rates in both configurations. A commercial inductor was tested under real working conditions with consistent results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analytical solution of the induced currents in multilayer cylindrical conductors under external electromagnetic sources

  • Acero, J.
  • Carretero, C.
  • Lope, I.
  • Alonso, R.
  • Burdío, J.M.
We present a closed-form solution for the induced losses in round conductors consisting of several concentric layers. The geometry under study corresponds to an infinitely-long and isolated multilayer cylinder where layers can have different electromagnetic properties and the number of layers is not restricted. The multilayer conductor is under an external time-varying magnetic field which induces currents and, accordingly, generates Joule dissipation. Total induced losses are obtained by integrating the losses of each layer. Mathematical expressions of the current distribution in each layer are derived from the solution of Maxwell''s equations. These expressions consist of a combination of Bessel functions of different kinds and orders. The current distribution in a particular layer not only depends on the properties of the layer but also on the properties of the rest of layers. Consequently, matrix formalism is adopted for describing current distribution of layers. Matrix description is numerically solved and results are compared with finite element simulations for different arrangements and cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and optimization of the efficiency of induction heating applications with litz-wire planar and solenoidal coils

  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
Optimization of the efficiency of an induction heating application is essential in order to improve both reliability and performance. For this purpose, multi-stranded cables with litz structure are often used in induction heating applications. This paper presents an analysis and optimization of the efficiency of induction heating systems focusing on the optimal copper volume of the winding with respect to different constraints. The analysis is based on the concept of a one-strand one-turn coil, which captures the dissipative effects of an induction heating system and reduces the number of variables of the analysis. An expression for the efficiency of the induction heating system is derived. It is found that, with the geometry and the other parameters of the system fixed, efficiency depends on the copper volume of the windings. In order to use this result to optimize the efficiency of an application, volume restrictions, the packing factor and the window utilization factor are also considered. The optimum frequency for an induction heating system is also studied in this work. An experimental verification for both planar and solenoidal cases is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and design of tubular coils for wireless inductive power transfer systems

  • Acero, J.
  • Serrano, J.
  • Carretero, C.
  • Lope, I.
  • Burdio, J.M.
We evaluate copper tubes as alternative of litz wire for planar coils of inductive power transfer (IPT) systems. For this purpose, a design methodology focused on maximizing the product of the magnetic coupling and the quality factor is proposed. The methodology is based on a combination of FEA simulations and analytical calculations of the skin and proximity losses in the tube. Analytical calculations are based on solutions of Maxwell''s equations for a tubular geometry. These solutions are oriented to extract both skin and proximity losses in the tube. Performance of a prototype of 1.5 kW is evaluated and compared with a conventional litz-wire implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and optimization of small inductors on extra-thin PCB for flexible cooking surfaces

  • Serrano, Javier
  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
  • Burdío, José Miguel
  • Alonso, Rafael
The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A comparative evaluation of SiC power devices for high performance domestic induction heating

  • Sarnago, H.
  • Lucía, O.
  • Burdío, J.M.
This paper presents a comparative evaluation of silicon carbide power devices for the domestic induction heating (IH) application, which currently has a major industrial, economic and social impact. The compared technologies include MOSFETs, normally on and normally off JFETs, as well as BJTs. These devices have been compared according to different figure-of-merit evaluating conduction and switching performance, efficiency, impact of temperature, as well as other driving and protection issues. To perform the proposed evaluation, a versatile test platform has been developed. As a result of this study, several differential features are identified and discussed, taking into account the pursued induction heating application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Soft-Stop Optimal Trajectory Control for Improved Performance of the Series Resonant Multi-Inverter for Domestic Induction Heating Applications

  • Lucia, O.
  • Sarnago, H.
  • Burdio, J.M.
Induction heating technology is leading technical advances in home appliances due to the benefits inherent to the contactless energy transfer including high efficiency, fast heating, safety, cleanness, and accurate control, among others. Recent design trends are focused on developing more versatile cooking appliances for an improved user performance. To achieve such implementations, new multicoil architectures and power converters must be developed. This paper proposes the series-resonant multiinverter as an efficient, versatile, and cost-effective alternative to supply multiinductor systems. One of the main design challenges is the high blocking voltage of power devices, which may compromise the converter performance. This paper proposes an optimized modulation strategy to reduce the maximum device voltage, enabling an optimized converter design with improved reliability and performance. The proposed modulation is analytically studied and tested using a multicoil induction heating converter prototype, proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interleaved resonant boost inverter featuring SiC module for high-performance induction heating

  • Sarnago, Héctor
  • Lucia, Óscar
  • Burdio, José Miguel
Induction heating (IH) has become the technology of choice in many industrial, domestic, and medical applications due to its high efficiency and performance. This paper proposes an interleaved resonant boost inverter featuring SiC three-phase module to achieve high efficiency and performance IH power supply. The proposed converter achieves high efficiency by reducing the current through the devices, while the use of an interleaved full-bridge configuration reduces input current ripple and provides additional control degrees. The proposed converter has been designed, implemented, and tested experimentally, proving the feasibility of this proposal.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.