Pasar al contenido principal

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario FUNDACION TECNALIA RESEARCH & INNOVATION
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE OVIEDO
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

-

CSD2009-00046

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación CONSOLIDER
Convocatoria CONSOLIDER
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT ROVIRA I VIRGILI
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate current analysis of AlGaN/GaN on silicon heterojunction transistors at the nanoscale

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N.
  • Chenot, S.
  • Cordier, Y.
  • Moreno, J. C.
  • Iglesias, V.
  • Porti, M.
  • Bayerl, A.
  • Lanza, M.
  • Nafría, M.
The gate leakage current of AlGaN/GaN (on silicon) high electron mobility transistor (HEMT) is investigated at the micro and nanoscale. The gate current dependence (25-310 °C) on the temperature is used to identify the potential conduction mechanisms, as trap assisted tunneling or field emission. The conductive atomic force microscopy investigation of the HEMT surface has revealed some correlation between the topography and the leakage current, which is analyzed in detail. The effect of introducing a thin dielectric in the gate is also discussed in the micro and the nanoscale. © 2012 American Institute of Physics., Authors gratefully appreciate financial support from Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale investigation of AlGaN/GaN-on-Si high electron mobility transistors

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N
  • Chenot, S
  • Cordier, Y
  • Moreno, J C
  • Jennings, M R
  • Gammon, P M
  • Fisher, C A
  • Iglesias, V
  • Porti, M
  • Bayerl, A
  • Lanza, M
  • Nafría, M
AlGaN/GaN HEMTs are devices which are strongly influenced by surface properties such as donor states, roughness or any kind of inhomogeneity. The electron gas is only a few nanometers away from the surface and the transistor forward and reverse currents are considerably affected by any variation of surface property within the atomic scale. Consequently, we have used the technique known as conductive AFM (CAFM) to perform electrical characterization at the nanoscale. The AlGaN/GaN HEMT ohmic (drain and source) and Schottky (gate) contacts were investigated by the CAFM technique. The estimated area of these highly conductive pillars (each of them of approximately 20-50 nm radius) represents around 5% of the total contact area. Analogously, the reverse leakage of the gate Schottky contact at the nanoscale seems to correlate somehow with the topography of the narrow AlGaN barrier regions producing larger currents., This work was partially supported by the Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional and Consumption Analysis of Integrated Circuits Supplied by Inductive Power Transfer by Powering Modulation and Lock-In Infrared Imaging

  • León, Javier
  • Perpiñà, Xavier
  • Sacristán-Riquelme, Jordi
  • Vellvehi, Miquel
  • Baldi Coll, Antonio
  • Jordà, Xavier
The functionality and consumption of a Radio Frequency IDentification Integrated Circuit (RFID IC) supplied by inductive power transfer has been noninvasively analyzed. This has been done by means of an InfraRed Lock-In Thermography (IR-LIT) system and frequency modulating the RFID IC powering scheme by biasing the external powering coil considering several amplitude modulation waveforms. This generates thermal harmonics at the beating frequency in all IC blocks, enabling their detection as heat sources by IR-LIT. The main aspects addressed in this investigation have been the following: the suitability study of the proposed modulation strategies, the characterization of the coupling between coils and its effects on the RFID blocks, the RFID IC functional analysis, and the dependence of the local energy consumption on the total power delivered to the die. In addition, it has been determined that the RFID IC presents a dysfunction due to the deactivation of some blocks during operation. Results suggest that this unexpected behavior is due to a desynchronization between some of the RFID blocks. Consequently, this stops the internal control signal, deactivates some specific RFID blocks, and ceases the back-telemetry block operation., This work was supported in part by the Spanish Ministry of Science and Innovation (Research Programs: Ramon Y Cajal, contract: RyC2010-07434,and Trench-SiC, contract: TEC2011-22607, Consolider RUE, contract: CSD2009-00046, and Rich, contract: TEC2010-19467) and in part bythe Generalitat de Catalunya (2014-SGR-1596)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermomechanical assessment of die-attach materials for wide bandgap semiconductor devices and harsh environment applications

  • Navarro, Luis A.
  • Perpina, Xavier
  • Godignon, Philippe
  • Montserrat, Josep
  • Banu, Viorel
  • Vellvehi, Miquel
  • Jorda, Xavier
Currently, the demand by new application scenarios of increasing operating device temperatures in power systems is requiring new die-attach materials with higher melting points and suitable thermomechanical properties. This makes the die-attach material selection, die-attaching process, and thermomechanical evaluation a real challenge in nowadays power packaging technology. This paper presents a comparative analysis of the thermomechanical performance of high-temperature die-attach materials (sintered nano-Ag, AuGe, and PbSnAg) under harsh thermal cycling tests. This study is carried out using a test vehicle formed by four dice (considering Si and SiC semiconductors) and Cu substrates. Thermally cycled test vehicles have been thermomechanically evaluated using die-shear tests and acoustic microscopy inspections. Besides, special attention is paid to set up a nano-Ag sintering process, in which the effects of sintering pressure or substrate surface state (roughness and surface activation) on the die-attach layer are analyzed. As a main result, this study shows that the best die-attach adherence is obtained for nano-Ag when pressure is applied on the dice (using a specifically designed press) during the sintering process (11 MPa provided die-shear forces of 53 kgf). However, this die-attach presents a faster thermomechanical degradation under harsh thermal cycling tests than other considered high-temperature die-attach materials (AuGe and PbSnAg) and PbSnAg shows the best thermomechanical performances. © 1986-2012 IEEE., This work is partially funded by the Spanish Ministry Economy and Competitiveness through the Research Program RAMON Y CAJAL (Contract No.: RyC-2010-07434), THERMOS Project (Contract No.:TEC2008-05577, FEDER), TRENCH-SIC Project (Contract No.:TEC2011-22607) and Consolider-RUE (Contract No.: CSD2009-00046)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Reduced-Order Model of a Half-Bridge Series Resonant Inverter for Power Control in Domestic Induction Heating Applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín, A.
  • Urriza, I.
  • Navarro, D.
When modeling resonant inverters considering the harmonic balance method, the order of the obtained transfer functions is twice the state variables number. This is explained because two components are considered for each state variable. In order to obtain a simpler transfer function model of a halfbridge series resonant inverter, different techniques of model order reduction have been considered in this work. Thus, a reduced-order model has been obtained by residualization providing much simpler analytical expressions than the original model. The proposed model has been validated by simulation and experimentally. The validity range of the proposed model is extended up to a tenth of the switching frequency. Taking into account the great load variability of induction heating applications, the proposed reduced-order model will allow the design of advanced controllers such as Gain-Scheduling.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduced-order models of series resonant inverters in induction heating applications

  • Domínguez, A.
  • Barragán, L.A.
  • Artigas, J.I.
  • Otín Acín, Aránzazu
  • Urriza, I.
  • Navarro, D.
From the controller design framework, a simple analytical model that captures the dominant behavior in the range of interest is the optimal. When modeling resonant circuits, complex mathematical models are obtained. These high-order models are not the most suitable for controller design. Although some assumptions can be made for simplifying these models, variable frequency operation or load uncertainty can make these premises no longer valid. In this work, a systematic modeling order reduction technique, Slowly Varying Amplitude and Phase (SVAP), is considered for obtaining simpler analytical models of resonant inverters. SVAP gives identical results as the classical model-order residualization technique from automatic control theory. A slight modification of SVAP, Slowly Varying Amplitude Derivative and Phase (SVADP) is applied in this paper to obtain a better validity range. SVADP is validated for a half-bridge series resonant inverter (HBSRI) and for a high- order plant, a dual-half bridge series resonant inverter (DHBSRI) giving analytical second-order transfer functions for both topologies. Simulation and experimental results are provided to show the validity range of the reduced-order models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analytical solution of the induced currents in multilayer cylindrical conductors under external electromagnetic sources

  • Acero, J.
  • Carretero, C.
  • Lope, I.
  • Alonso, R.
  • Burdío, J.M.
We present a closed-form solution for the induced losses in round conductors consisting of several concentric layers. The geometry under study corresponds to an infinitely-long and isolated multilayer cylinder where layers can have different electromagnetic properties and the number of layers is not restricted. The multilayer conductor is under an external time-varying magnetic field which induces currents and, accordingly, generates Joule dissipation. Total induced losses are obtained by integrating the losses of each layer. Mathematical expressions of the current distribution in each layer are derived from the solution of Maxwell''s equations. These expressions consist of a combination of Bessel functions of different kinds and orders. The current distribution in a particular layer not only depends on the properties of the layer but also on the properties of the rest of layers. Consequently, matrix formalism is adopted for describing current distribution of layers. Matrix description is numerically solved and results are compared with finite element simulations for different arrangements and cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and optimization of the efficiency of induction heating applications with litz-wire planar and solenoidal coils

  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
Optimization of the efficiency of an induction heating application is essential in order to improve both reliability and performance. For this purpose, multi-stranded cables with litz structure are often used in induction heating applications. This paper presents an analysis and optimization of the efficiency of induction heating systems focusing on the optimal copper volume of the winding with respect to different constraints. The analysis is based on the concept of a one-strand one-turn coil, which captures the dissipative effects of an induction heating system and reduces the number of variables of the analysis. An expression for the efficiency of the induction heating system is derived. It is found that, with the geometry and the other parameters of the system fixed, efficiency depends on the copper volume of the windings. In order to use this result to optimize the efficiency of an application, volume restrictions, the packing factor and the window utilization factor are also considered. The optimum frequency for an induction heating system is also studied in this work. An experimental verification for both planar and solenoidal cases is also presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and design of tubular coils for wireless inductive power transfer systems

  • Acero, J.
  • Serrano, J.
  • Carretero, C.
  • Lope, I.
  • Burdio, J.M.
We evaluate copper tubes as alternative of litz wire for planar coils of inductive power transfer (IPT) systems. For this purpose, a design methodology focused on maximizing the product of the magnetic coupling and the quality factor is proposed. The methodology is based on a combination of FEA simulations and analytical calculations of the skin and proximity losses in the tube. Analytical calculations are based on solutions of Maxwell''s equations for a tubular geometry. These solutions are oriented to extract both skin and proximity losses in the tube. Performance of a prototype of 1.5 kW is evaluated and compared with a conventional litz-wire implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and optimization of small inductors on extra-thin PCB for flexible cooking surfaces

  • Serrano, Javier
  • Lope, Ignacio
  • Acero, Jesús
  • Carretero, Claudio
  • Burdío, José Miguel
  • Alonso, Rafael
The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A comparative evaluation of SiC power devices for high performance domestic induction heating

  • Sarnago, H.
  • Lucía, O.
  • Burdío, J.M.
This paper presents a comparative evaluation of silicon carbide power devices for the domestic induction heating (IH) application, which currently has a major industrial, economic and social impact. The compared technologies include MOSFETs, normally on and normally off JFETs, as well as BJTs. These devices have been compared according to different figure-of-merit evaluating conduction and switching performance, efficiency, impact of temperature, as well as other driving and protection issues. To perform the proposed evaluation, a versatile test platform has been developed. As a result of this study, several differential features are identified and discussed, taking into account the pursued induction heating application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Soft-Stop Optimal Trajectory Control for Improved Performance of the Series Resonant Multi-Inverter for Domestic Induction Heating Applications

  • Lucia, O.
  • Sarnago, H.
  • Burdio, J.M.
Induction heating technology is leading technical advances in home appliances due to the benefits inherent to the contactless energy transfer including high efficiency, fast heating, safety, cleanness, and accurate control, among others. Recent design trends are focused on developing more versatile cooking appliances for an improved user performance. To achieve such implementations, new multicoil architectures and power converters must be developed. This paper proposes the series-resonant multiinverter as an efficient, versatile, and cost-effective alternative to supply multiinductor systems. One of the main design challenges is the high blocking voltage of power devices, which may compromise the converter performance. This paper proposes an optimized modulation strategy to reduce the maximum device voltage, enabling an optimized converter design with improved reliability and performance. The proposed modulation is analytically studied and tested using a multicoil induction heating converter prototype, proving the feasibility of this proposal.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A versatile multilevel converter platform for cancer treatment using irreversible electroporation

  • Sarnago, Héctor
  • Lucía, Óscar
  • Naval, Alejandro
  • Burdío, José M.
  • Castellví Fernández, Quim
  • Ivorra Cano, Antoni, 1974-
Electroporation is an effective technique based on applying an electric field to cells, commonly used to increase the effectivity of drug and gene delivery. When the applied electric field is strong enough, it can be used for selective cell death with promising results in cancer treatment. This paper proposes the development of a modular multilevel topology in order to provide a high-performance tool for research in electroporation. The proposed converter based on a scalable multicell approach is detailed and analyzed in this paper, and an experimental prototype has been designed and built. The experimental results prove the feasibility of this proposal to enable advanced electroporation techniques., This work was supported in part by Diputación General de Aragón-Fondo Social Europeo, in part by the University of Zaragoza/nunder Grant JIUZ-2014-TEC-08, and in part by the Spanish Ministerio de Economía y Competitividad under Grant CSD2009-00046, Grant TEC2013-42937-R, and Grant Project RTC-2014-1847-6.