Pasar al contenido principal

TRANSISTORES MOS DE POTENCIA DE ALTA TEMPERATURA BASADOS EN SEMICONDUCTORES DE GAP ANCHO

TEC2008-05577

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate current analysis of AlGaN/GaN on silicon heterojunction transistors at the nanoscale

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N.
  • Chenot, S.
  • Cordier, Y.
  • Moreno, J. C.
  • Iglesias, V.
  • Porti, M.
  • Bayerl, A.
  • Lanza, M.
  • Nafría, M.
The gate leakage current of AlGaN/GaN (on silicon) high electron mobility transistor (HEMT) is investigated at the micro and nanoscale. The gate current dependence (25-310 °C) on the temperature is used to identify the potential conduction mechanisms, as trap assisted tunneling or field emission. The conductive atomic force microscopy investigation of the HEMT surface has revealed some correlation between the topography and the leakage current, which is analyzed in detail. The effect of introducing a thin dielectric in the gate is also discussed in the micro and the nanoscale. © 2012 American Institute of Physics., Authors gratefully appreciate financial support from Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoscale investigation of AlGaN/GaN-on-Si high electron mobility transistors

  • Fontserè, Abel
  • Pérez-Tomás, Amador
  • Placidi, Marcel
  • Llobet, Jordi
  • Baron, N
  • Chenot, S
  • Cordier, Y
  • Moreno, J C
  • Jennings, M R
  • Gammon, P M
  • Fisher, C A
  • Iglesias, V
  • Porti, M
  • Bayerl, A
  • Lanza, M
  • Nafría, M
AlGaN/GaN HEMTs are devices which are strongly influenced by surface properties such as donor states, roughness or any kind of inhomogeneity. The electron gas is only a few nanometers away from the surface and the transistor forward and reverse currents are considerably affected by any variation of surface property within the atomic scale. Consequently, we have used the technique known as conductive AFM (CAFM) to perform electrical characterization at the nanoscale. The AlGaN/GaN HEMT ohmic (drain and source) and Schottky (gate) contacts were investigated by the CAFM technique. The estimated area of these highly conductive pillars (each of them of approximately 20-50 nm radius) represents around 5% of the total contact area. Analogously, the reverse leakage of the gate Schottky contact at the nanoscale seems to correlate somehow with the topography of the narrow AlGaN barrier regions producing larger currents., This work was partially supported by the Spanish MICyN grants TEC2008-05577/TEC (THERMOS) and Ingenio-Consolider 2010 CSD2009-00046 (RUE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermomechanical assessment of die-attach materials for wide bandgap semiconductor devices and harsh environment applications

  • Navarro, Luis A.
  • Perpina, Xavier
  • Godignon, Philippe
  • Montserrat, Josep
  • Banu, Viorel
  • Vellvehi, Miquel
  • Jorda, Xavier
Currently, the demand by new application scenarios of increasing operating device temperatures in power systems is requiring new die-attach materials with higher melting points and suitable thermomechanical properties. This makes the die-attach material selection, die-attaching process, and thermomechanical evaluation a real challenge in nowadays power packaging technology. This paper presents a comparative analysis of the thermomechanical performance of high-temperature die-attach materials (sintered nano-Ag, AuGe, and PbSnAg) under harsh thermal cycling tests. This study is carried out using a test vehicle formed by four dice (considering Si and SiC semiconductors) and Cu substrates. Thermally cycled test vehicles have been thermomechanically evaluated using die-shear tests and acoustic microscopy inspections. Besides, special attention is paid to set up a nano-Ag sintering process, in which the effects of sintering pressure or substrate surface state (roughness and surface activation) on the die-attach layer are analyzed. As a main result, this study shows that the best die-attach adherence is obtained for nano-Ag when pressure is applied on the dice (using a specifically designed press) during the sintering process (11 MPa provided die-shear forces of 53 kgf). However, this die-attach presents a faster thermomechanical degradation under harsh thermal cycling tests than other considered high-temperature die-attach materials (AuGe and PbSnAg) and PbSnAg shows the best thermomechanical performances. © 1986-2012 IEEE., This work is partially funded by the Spanish Ministry Economy and Competitiveness through the Research Program RAMON Y CAJAL (Contract No.: RyC-2010-07434), THERMOS Project (Contract No.:TEC2008-05577, FEDER), TRENCH-SIC Project (Contract No.:TEC2011-22607) and Consolider-RUE (Contract No.: CSD2009-00046)., Peer reviewed