Pasar al contenido principal

DESARROLLO DE DISPOSITIVOS DE POTENCIA SIC TRENCH MOSFET PARA MODULOS DE POTENCIA DE ALTA FRECUENCIA DE CONMUTACION

TEC2011-22607

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional and Consumption Analysis of Integrated Circuits Supplied by Inductive Power Transfer by Powering Modulation and Lock-In Infrared Imaging

  • León, Javier
  • Perpiñà, Xavier
  • Sacristán-Riquelme, Jordi
  • Vellvehi, Miquel
  • Baldi Coll, Antonio
  • Jordà, Xavier
The functionality and consumption of a Radio Frequency IDentification Integrated Circuit (RFID IC) supplied by inductive power transfer has been noninvasively analyzed. This has been done by means of an InfraRed Lock-In Thermography (IR-LIT) system and frequency modulating the RFID IC powering scheme by biasing the external powering coil considering several amplitude modulation waveforms. This generates thermal harmonics at the beating frequency in all IC blocks, enabling their detection as heat sources by IR-LIT. The main aspects addressed in this investigation have been the following: the suitability study of the proposed modulation strategies, the characterization of the coupling between coils and its effects on the RFID blocks, the RFID IC functional analysis, and the dependence of the local energy consumption on the total power delivered to the die. In addition, it has been determined that the RFID IC presents a dysfunction due to the deactivation of some blocks during operation. Results suggest that this unexpected behavior is due to a desynchronization between some of the RFID blocks. Consequently, this stops the internal control signal, deactivates some specific RFID blocks, and ceases the back-telemetry block operation., This work was supported in part by the Spanish Ministry of Science and Innovation (Research Programs: Ramon Y Cajal, contract: RyC2010-07434,and Trench-SiC, contract: TEC2011-22607, Consolider RUE, contract: CSD2009-00046, and Rich, contract: TEC2010-19467) and in part bythe Generalitat de Catalunya (2014-SGR-1596)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermomechanical assessment of die-attach materials for wide bandgap semiconductor devices and harsh environment applications

  • Navarro, Luis A.
  • Perpina, Xavier
  • Godignon, Philippe
  • Montserrat, Josep
  • Banu, Viorel
  • Vellvehi, Miquel
  • Jorda, Xavier
Currently, the demand by new application scenarios of increasing operating device temperatures in power systems is requiring new die-attach materials with higher melting points and suitable thermomechanical properties. This makes the die-attach material selection, die-attaching process, and thermomechanical evaluation a real challenge in nowadays power packaging technology. This paper presents a comparative analysis of the thermomechanical performance of high-temperature die-attach materials (sintered nano-Ag, AuGe, and PbSnAg) under harsh thermal cycling tests. This study is carried out using a test vehicle formed by four dice (considering Si and SiC semiconductors) and Cu substrates. Thermally cycled test vehicles have been thermomechanically evaluated using die-shear tests and acoustic microscopy inspections. Besides, special attention is paid to set up a nano-Ag sintering process, in which the effects of sintering pressure or substrate surface state (roughness and surface activation) on the die-attach layer are analyzed. As a main result, this study shows that the best die-attach adherence is obtained for nano-Ag when pressure is applied on the dice (using a specifically designed press) during the sintering process (11 MPa provided die-shear forces of 53 kgf). However, this die-attach presents a faster thermomechanical degradation under harsh thermal cycling tests than other considered high-temperature die-attach materials (AuGe and PbSnAg) and PbSnAg shows the best thermomechanical performances. © 1986-2012 IEEE., This work is partially funded by the Spanish Ministry Economy and Competitiveness through the Research Program RAMON Y CAJAL (Contract No.: RyC-2010-07434), THERMOS Project (Contract No.:TEC2008-05577, FEDER), TRENCH-SIC Project (Contract No.:TEC2011-22607) and Consolider-RUE (Contract No.: CSD2009-00046)., Peer reviewed