Pasar al contenido principal

Producción limpia de energía con captura de CO2

IJCI-2016-30776

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of the polymer/particle interphase in composite materials by molecular probing

  • Maghami, Saeid
  • Shahrooz, Mahdi
  • Mehrabani-Zeinabad, Arjomand
  • Zornoza, Beatriz
  • Sadeghi, Morteza
11 figures, 5 tables.-- Supplementary information available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, In this study, a new method was developed for the characterization of the interface morphology in polymer/particle composites. This method, not limited to a specific polymer or particle, utilizes the gas permeability of the composites to determine the interfacial properties such as the type of polymer-particle interactions as well as the thickness and the transport properties of the interphase. Moreover, it can be employed to determine the size of the aggregates in the case of particle aggregation. The proposed method was evaluated by comparing its results with the findings of the small-angle X-ray scattering (SAXS) analysis for polyethersulfone (PES)-based composites containing pristine and fumed silica nanoparticles. Our method was also evaluated by analyzing the results of other studies obtained from the literature., B.Z. acknowledges the “Juan de la Cierva” Program (IJCI-2016-30776)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of solvent, Lewis acid–base complex, and nanoparticles on the morphology and gas separation properties of polysulfone membranes

  • Maghami, Saeid
  • Sadeghi, Morteza
  • Baghersad, Samaneh
  • Zornoza, Beatriz
10 figures, 5 tables., A series of polysulfone (PSF) membranes were prepared using different solvents: dimethylformamide (DMF), tetrahydrofuran, dimethylacetamide, and n-methyl-2-pyrrolidone (NMP). The PSF membrane prepared by NMP showed the highest gas permeability. The influence of propionic acid as a Lewis acid on gas separation properties of the PSF was explored. The PSF membrane prepared by the casting solution containing 25 wt% PSF, 35 wt% propionic acid, and 40 wt% NMP showed a superior gas separation performance. The gas permeation measurements indicated that incorporating 30 wt% γ-alumina nanoparticles into the PSF matrix resulted in about the respective 43% and 41% increase in CO2 and O2 permeability together with a rise in CO2/CH4 and O2/N2 selectivities (13% and 7%, respectively). Furthermore, by rearranged modified Maxwell model, the role and nature of the interfacial layer in the PSF-based mixed matrix membranes were mathematically analyzed considering a reduced permeability factor., Beatriz Zornoza acknowledges the “Juan de la Cierva” Program (IJCI-2016-30776)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iron-based oxygen carrier particles produced from micronized size minerals or industrial wastes

  • Zornoza, Beatriz
  • Abad Secades, Alberto
  • Mendiara, Teresa
  • Izquierdo Pantoja, María Teresa
11 figures, 5 tables.-- Supplementary material available., The production of highly reactive oxygen carrier particles based on low-cost iron materials is explored for chemical looping processes. Ten different low-cost Fe-based materials in the micronized size, both minerals and industrial residues, have been tested as precursors of oxygen carrier particles. The redox reactivity of each of the materials is evaluated and compared to the state-of-the art with particulate materials, including one new material introduced in this work. Due to its excellent reactivity, Promifer material was used to produce oxygen carrier particles by pelletizing and granulation. Considering a trade-off between crushing strength and reactivity, pelletizing process was selected. This material calcined at 950 °C showed high reactivity with CH4. If a higher operating temperature was required, e.g. 1000 °C with solid fuels, the reactivity decreased. Low attrition rates and good fluid-dynamic behavior with the pelletized particles, without agglomeration along the redox cycles, were found in a fluidized bed reactor., This work was supported by the SWINELOOP project (Grant PID2019-106441RB-I00 funded by MCIN/AEI/10.13039/501100011033). B.Z. acknowledges the “Juan de la Cierva” Program (Grant IJCI-2016-30776 funded by MCIN/AEI/10.13039/501100011033). Authors thank PROMINDSA for supplying the evaluated materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Seeking of COF materials for hybrid membrane preparation towards molecular separation application

  • Zornoza, Beatriz
  • Ulcuango, Matias
  • Téllez, Carlos
  • Coronas, Joaquín
Trabajo presentado a la World Online Conference on Sustainable Technologies (WOCST), celebrada del 17 al 19 de maro de 2021., Financial support from PID2019-104009RB-I00/AEI/10.13039/501100011033, the Aragon Government, the ESF and FEDER is gratefully acknowledged. Funding from Juan de la Cierva IJCI-2016-30776 (B.Z.) program is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of oxygen carriers based on manganese‑iron mixed oxides prepared from natural ores or industrial waste products for chemical looping processes

  • Zornoza, Beatriz
  • Mendiara, Teresa
  • Abad Secades, Alberto
10 figures, 6 tables., Manganese‑iron mixed oxides have been identified as promising oxygen carrier materials in chemical looping processes. In this work, low-cost raw materials are considered for the production of this type of oxygen carrier. Four manganese based minerals from deposits of different locations – South Africa, Gabon(x2) and Brazil – and two iron based materials (Fe-ore from Spain and Redmud waste) were used to prepare suitable oxygen carriers through a new two-step production method: a mixing-grinding (about 5 μm) pre-treatment followed by pelletizing, crushing and sieving to produce particles of the desired size (100–300 μm). This method was required in order to form the MnFe mixed oxide and to provide permanent magnetic properties, which were not found when the oxygen carriers were prepared by the classical one-step method, i.e. crushing and sieving of raw materials to the desired particle size (100–300 μm). The oxygen uncoupling capability of the developed materials was extremely low and even completely lost after repeated redox cycles. However, they were reactive under chemical looping conditions with H, CO and CH. Reactivity varied with the raw materials used and with the redox cycles, being of crucial importance for its evolution the intensity of the chemical stress during hundreds of redox cycles., This work was supported by the SWINELOOP project (PID2019-106441RB-I00/AEI/10.13039/501100011033). B.Z. acknowledges the “Juan de la Cierva” Program (IJCI-2016-30776)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of manganese-iron mixed oxides reinforced with titanium and prepared from minerals for their use as oxygen carriers

  • Zornoza, Beatriz
  • Mendiara, Teresa
  • Abad Secades, Alberto
4 figures, 7 tables., Chemical Looping Combustion (CLC) allows CO2 capture at low cost. This technology is based on solid oxygen carriers which supply the oxygen required for combustion of the fuel while they experience successive reduction-oxidation cycles. Oxygen carriers based on minerals or industrial residues present the advantage of their low cost but complete combustion of the fuel is not always achieved. Manganese‑iron mixed oxides doped with titanium can improve combustion efficiency due to its oxygen uncoupling capability. Moreover, they present the advantage of their magnetic properties. The objective of this work was to produce this type of oxygen carriers from minerals/residues instead of from synthetic materials. Four oxygen carriers with a fixed Mn-Fe molar ratio were produced with a 7 wt.% TiO2 addition. Two manganese-based (MnSA and MnGBMPB) and one iron-based (Tierga) minerals were used as source of Mn and Fe, respectively. As source of Ti, the mineral ilmenite was used. After characterization of the materials, their reactivity was analysed in a TGA. The reactivity to the main combustion gasses was lower than that corresponding to similar oxygen carriers obtained from synthetic sources although they maintained their magnetic properties. Thus, its use as magnetic support of oxygen carriers was recommended. In this respect, first tests were conducted using CuO as active phase supported on one of the low-cost support materials produced in this work., This work was supported by Grant PDC2021-121190-I00 MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. [...]. B.Z. acknowledges the “Juan de la Cierva” Program (IJCI-2016–30776)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of manganese-iron mixed oxides reinforced with titanium and prepared from minerals for their use as oxygen carriers

  • Zornoza, Beatriz
  • Mendiara, Teresa
  • Abad, Alberto
Chemical Looping Combustion (CLC) allows CO2 capture at low cost. This technology is based on solid oxygen carriers which supply the oxygen required for combustion of the fuel while they experience successive reduction-oxidation cycles. Oxygen carriers based on minerals or industrial residues present the advantage of their low cost but complete combustion of the fuel is not always achieved. Manganese‑iron mixed oxides doped with titanium can improve combustion efficiency due to its oxygen uncoupling capability. Moreover, they present the advantage of their magnetic properties. The objective of this work was to produce this type of oxygen carriers from minerals/residues instead of from synthetic materials. Four oxygen carriers with a fixed Mn-Fe molar ratio were produced with a 7 wt.% TiO2 addition. Two manganese-based (MnSA and MnGBMPB) and one iron-based (Tierga) minerals were used as source of Mn and Fe, respectively. As source of Ti, the mineral ilmenite was used. After characterization of the materials, their reactivity was analysed in a TGA. The reactivity to the main combustion gasses was lower than that corresponding to similar oxygen carriers obtained from synthetic sources although they maintained their magnetic properties. Thus, its use as magnetic support of oxygen carriers was recommended. In this respect, first tests were conducted using CuO as active phase supported on one of the low-cost support materials produced in this work.