Pasar al contenido principal

Sustainable and stable development of perovskite solar cells

JDC2023-051223-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergistic enhancement of Bi2Te3/Sb2Te3-PMMA thermoelectric generators via dithiol-assisted conductivity and FEM-based geometry optimization

  • Hamawandi, Bejan
  • Serrano-Claumarchirant, José F.
  • Ergul, Adem B.
  • Pudzs, Kaspars
  • Pudza, Inga
  • Parsa, Parva
  • Kirsanli, Metehan
  • Bitmets, Oskars
  • Toprak, Muhammet S.
[EN] In recent decades, thermoelectric (TE) materials have proven to be a complementary source of renewable energy, as they can directly convert waste heat into electrical energy. Energy-efficient, reliable, and scalable synthetic routes for the fabrication of TE materials and their processing into functional devices via low-energy and low-waste routes are necessary for the broader adoption of these materials in various applications. In this work, we report the formulation of hybrid thermoelectric (hTE) inks based on nanostructured Sb2Te3 and Bi2Te3, using PMMA as the polymer matrix and hexanedithiol (HDT) as the binder. Percolation studies were conducted to determine the optimal film composition, with an 80% nanoparticle content yielding the highest TE performance. Finite element modelling (FEM) was employed to optimize the device geometry, including the cross-sectional area ratio of p-and n-type legs, to maximize power output. Based on these results, a flexible hTEG was fabricated using the optimized ink composition. The device exhibited an output power of 950 nW and a Power output Density (PoD) of 40.37 nW cm-2 under a 30 K temperature gradient, significantly outperforming previously reported polymer-based flexible hTEGs incorporating chalcogenides. This study presents a sustainable and effective strategy for developing high-performance hybrid thermoelectric devices through ink formulation, composition optimization, and simulation-guided device design., B.H. acknowledges the support of the Latvian Council of Science project No.1.1.1.9/LZP/1/24/043.M.S.T. and J.F.S-C. acknowledges funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 863222, and Olle Engkvist Foundation (SOEB, 226-0113). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. The experiments at the DESY PETRA III synchrotron were performed within proposal No I-20220381 EC. M.S.T. acknowledges the financial support from Olle Engkvist Foundation (SOEB, 190-0315) for establishing MW synthesis facilities. O.B and K.P. thank the support of the Latvian Council of Science, grant number lzp-2023/1-0456. J.F.S-C. acknowledges the support of the Juan de la Cierva fellowship (JDC2023-051223-I) .