Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Metabolomic diferences between COVID-19 and H1N1 influenza induced ARDS

  • Ruiz-Cabello Osuna, Jesús
  • Izquierdo García, José Luis
Background: Acute respiratory distress syndrome (ARDS) is a type of respiratory failure characterized by lung inflammation and pulmonary edema. Coronavirus disease 2019 (COVID-19) is associated with ARDS in the more severe cases. This study aimed to compare the specificity of the metabolic alterations induced by COVID-19 or Influenza A pneumonia (IAP) in ARDS. Methods: Eighteen patients with ARDS due to COVID-19 and twenty patients with ARDS due to IAP, admitted to the intensive care unit. ARDS was defined as in the American-European Consensus Conference. As compared with patients with COVID-19, patients with IAP were younger and received more often noradrenaline to maintain a mean arterial pressure>65 mm Hg. Serum samples were analyzed by Nuclear Magnetic Resonance Spectroscopy. Multivariate Statistical Analyses were used to identify metabolic differences between groups. Metabolic pathway analysis was performed to identify the most relevant pathways involved in ARDS development. Results: ARDS due to COVID-19 or to IAP induces a different regulation of amino acids metabolism, lipid metabolism, glycolysis, and anaplerotic metabolism. COVID‐19 causes a significant energy supply deficit that induces supplementary energy-generating pathways. In contrast, IAP patients suffer more marked inflammatory and oxidative stress responses. The classificatory model discriminated against the cause of pneumonia with a success rate of 100%. Conclusions: Our findings support the concept that ARDS is associated with a characteristic metabolomic profile that may discriminate patients with ARDS of different etiologies, being a potential biomarker for the diagnosis, prognosis, and management of this condition
Docta Complutense
Publicación Artículo científico (JournalArticle)

Urine NMR-based TB metabolic fingerprinting for the diagnosis of TB in children

  • Izquierdo García, José Luis
  • Ruiz-Cabello Osuna, Jesús
Tuberculosis (TB) is a major cause of morbidity and mortality in children, and early diagnosis and treatment are crucial to reduce long-term morbidity and mortality. In this study, we explore whether urine nuclear magnetic resonance (NMR)-based metabolomics could be used to identify differences in the metabolic response of children with different diagnostic certainty of TB. We included 62 children with signs and symptoms of TB and 55 apparently healthy children. Six of the children with presumptive TB had bacteriologically confirmed TB, 52 children with unconfirmed TB, and 4 children with unlikely TB. Urine metabolic fingerprints were identified using high- and low-field proton NMR platforms and assessed with pattern recognition techniques such as principal components analysis and partial least squares discriminant analysis. We observed differences in the metabolic fingerprint of children with bacteriologically confirmed and unconfirmed TB compared to children with unlikely TB (p= 0.041 and p= 0.013, respectively). Moreover, children with unconfirmed TB with X-rays compatible with TB showed differences in the metabolic fingerprint compared to children with non-pathological X-rays (p= 0.009). Differences in the metabolic fingerprint in children with different diagnostic certainty of TB could contribute to a more accurate characterisation of TB in the paediatric population. The use of metabolomics could be useful to improve the prediction of TB progression and diagnosis in children.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the use of the Theory of Critical Distances with mesh control for fretting fatigue lifetime assessment

  • Zabala, A.
  • Infante-Garcia, D.
  • Goel, S.
  • Endrino, J. L.
  • Llavori, I.
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[EN] This work analyses the viability of the theory of critical distances (TCD) using mesh control for fretting fatigue lifetime assessment. More than seven hundred sets of simulations were performed by taking seventy different experimental tests reported previously in the literature. The outcome of the present study suggests that the TCD mesh control method can be extended to fretting fatigue problems by the reasonable assumption of setting the right element size proportional to critical distance. In this study, a significant computational time reduction of up to 97% was obtained. Thus, this study provides a simple method to design complex 3D industrial components subjected to fretting fatigue phenomena using finite element analysis efficiently without requiring complex remeshing techniques, Surface Technologies Research Group at Mondragon University gratefully acknowledge the financial support given by the Eusko Jaurlaritza under the "Programa de apoyo a la investigacion colaborativa en areas estrategicas" (Project MULTIMAT+: Ref. KK-2019/00067) program. The financial support given by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the FEDER program through the projects DPI2017-89197-C2-1-R, DPI2017-89197-C2-2-R and the FPI subprogram with the reference BES-2015-072070. The support of the Generalitat Valenciana, Programme PROMETEO 2016/007, is also acknowledged. SG and JLE acknowledges the support of the "Centre for Doctoral Training in Ultra-Precision" at Cranfield University (EP/L016567/1). We would like to acknowledge the support from the Isambard Bristol, UK supercomputing service extended via the Resource Allocation Panel (RAP) grant and financial help from other grants such as RCUK (Grant No. EP/S013652/1 and EP/S036180/1), Cost Actions (CA15102 and CA18125) from H2020 and Royal Academy of Engineering (Grant No. IAPP18-19\295). JLE would like to acknowledge the Department of Economic Development and Infrastructure of the Basque Country (Elkartek Program, KK-2019/00062)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Refractive Index and Viscosity Sensing Using Polymeric Nanofibers Optical Structures

  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Kovylina-Zabyako, Miroslavna
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Martín-Sánchez, David
  • Pérez-Márquez, Ana
  • Maudes, Jon
  • Murillo, Nieves
[EN] Porous materials have demonstrated to be ideal candidates for the creation of optical sensors with very high sensitivities. This is due both to the possibility of infiltrating the target substances into them and to their notable surfaceto-volume ratio that provides a larger biosensing area. Among porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative for the creation of low-cost and easy-to-produce high performance optical sensors, for example, based on Fabry-Pérot (FP) interferometers. However, the sensing performance of these polymeric NFs sensors is limited by the low refractive index contrast between the NFs porous structure and the target medium when performing in-liquid sensing experiments, which determines a very low amplitude of the FP interference fringes appearing in the spectrum. This problem has been solved with the deposition of a thin metal layer ( 3 nm) over the NFs sensing layer. We have successfully used these metal-coated FP NFs sensors to perform several real-time and in-flow refractive index sensing experiments. From these sensing experiments, we have also determined that the sponge-like structure of the NFs layer suffers an expansion/compression process that is dependent of the viscosity of the analyzed sample, what thus gives the possibility to perform a simultaneous dual sensing of refractive index and viscosity of a fluid., This work was supported by the Spanish government through the project TEC2015-63838-C3-1-R-OPTONANOSENS and from the Basque government through the KK-2019/00101-mu 4FINDUSTRY.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stabilization of Polymeric Nanofibers Layers for Use as Real-Time and In-Flow Photonic Sensors

  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Martinez-Perez, Paula
  • Pérez-Márquez, Ana
  • Maudes, Jon
  • Murillo, Nieves
[EN] In order to increase the sensitivity of a sensor, the relationship between its volume and the surface available to be functionalized is of great importance. Accordingly, porous materials are becoming very relevant, because they have a notable surface-to-volume ratio. Moreover, they o er the possibility to infiltrate the target substances on them. Among other porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative to low-cost and easy-to-produce high-performance photonic sensors. However, experimental results show a spectrum drift when performing sensing measurements in real-time. That drift is responsible for a significant error when trying to determine the refractive index variation for a target solution,and, because of that, for the detection of the presence of certain analytes. In order to avoid that problem, different chemical and thermal treatments were studied. The best results were obtained for thermal steps at 190 ºC during times between 3 and 5 h. As a result, spectrum drifts lower than 5 pm/min and sensitivities of 518 nm/refractive index unit (RIU) in the visible range of the spectrum were achieved in different electrospun NFs sensors., This work was supported by the Spanish government through the project TEC2015-63838-C3-1-ROPTONANOSENS and from the Basque government through the project KK-2019/00101 -mu 4INDUSTRY.
eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Artículo científico (JournalArticle)

Effect of the loading-rate and stress state on the constitutive modelling and fracture of 2205 Duplex stainless steel

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación

On the use of the Theory of Critical Distances with mesh control for fretting fatigue lifetime assessment

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Artículo científico (JournalArticle)

A ternary mixture at the border of Soret separation stability

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Artículo científico (JournalArticle)

An automatic thermo-mechanical testing apparatus for metal forming applications

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Contribución de congreso (ConferenceOutput)

Critical Analysis of the Suitability of Surrogate Models for Finite Element Method Application in Catalog-Based Suspension Bushing Design

  • Cernuda, Carlos
  • Llavori, Inigo
  • Zavoianu, Alexandru-Ciprian
  • Aguirre, Aitor
  • Zabala, Alaitz
  • Plaza, Jon
eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación Contribución de congreso (ConferenceOutput)

Universal Electric Vehicle Charging Infrastructure Analysis Tool

eBiltegia. Repositorio Institucional de Mondragon Unibertsitatea
Publicación

Experts’ Evaluation: Datasets of Rating Questionnaires for the HEUROBOX Heuristics to Evaluate Industrial Collaborative Robotic Environments

  • Apraiz, Ainhoa
  • Mulet Alberola, Jose Antonio
  • Lasa, Ganix
  • Mazmela Etxabe, Maitane
  • Nguyen Thi Ngoc, Hien
This study presents a dataset derived from expert evaluation aimed at assessing two aspects: (1) the usability of a newly developed set of heuristics (HEUROBOX), and (2) the relative importance of heuristic categories in evaluating collaborative robotic environments for industrial applications. The experts were carefully selected based on their expertise in various relevant fields, including collaborative robotics, human factors, biomechanics, and manufacturing. Their evaluations were obtained through the System Usability Scale (SUS) questionnaire and category-rating questionnaires, which were employed in conjunction with the Analytical Hierarchy Process (AHP) methodology. The resulting dataset was analyzed using AHP algorithms implemented in the R programming language. The transparency of both the data and the code allows design practitioners and researchers to utilize them for replication and further analysis, thereby adhering to the principles of reproducible research in the context of multiple-criteria decision analysis.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Benchtop nuclear magnetic resonance-based metabolomicapproach for the diagnosis of bovine tuberculosis

  • Ruiz-Cabello Osuna, Jesús
  • Izquierdo García, José Luis
Even though enormous efforts and control strategies have been implemented, bovine tuberculosis (TB) remains a significant source of health and socioeconomic concern. The standard method used in TB eradication programs for in vivo detection is the tuberculin skin test. However, the specificity of the tuberculin skin test is affected by infection with non-tuberculous mycobacteria or by vaccination. Thus, some animals are not correctly diagnosed. This study aimed first to identify a plasma metabolic TB profile by high-field (HF) nuclear magnetic resonance (NMR) spectroscopy and second measure this characteristic TB metabolic profile using low-field benchtop (LF) NMR as an affordable molecular technology for TB diagnosis. Plasma samples from cattle diagnosed with TB (derivation set, n = 11), diagnosed with paratuberculosis (PTB, n = 10), PTB-vaccinated healthy control (n = 10) and healthy PTB-unvaccinated control (n = 10) were analyzed by NMR. Unsupervised Principal Component Analysis (PCA) was used to identify metabolic differences between groups. We identified 14 metabolites significantly different between TB and control animals. The second group of TB animals was used to validate the results (validation set, n = 14). Predictive models based on metabolic fingerprint acquired by both HF and LF NMR spectroscopy successfully identified TB versus control subjects (Area under the curve of Receiver Operating Characteristic over 0.92, in both models; Confidence Interval 0.77–1).
Docta Complutense
Publicación Artículo científico (JournalArticle)

HAP-Multitag, a PET and Positive MRI Contrast Nanotracer for the Longitudinal Characterization of Vascular Calcifications in Atherosclerosis

  • Juan Pellico
  • Irene Fernández Barahona
  • Ruiz-Cabello Osuna, Jesús
  • Lucía Gutiérrez
  • María Muñoz-Hernando
  • María J. Sánchez Guisado
  • Irati Aiestaran-Zelaia
  • Lydia Martínez-Parra
  • Rodríguez Ramírez De Arellano, Ignacio
  • Jacob Bentzon
  • Fernando Herranz
Vascular microcalcifications are associated with atherosclerosis plaque instability and, therefore, to increased mortality. Because of this key role, several imaging probes have been developed for their in vivo identification. Among them, [18F]FNa is the gold standard, showing a large uptake in the whole skeleton by positron emission tomography. Here, we push the field toward the combined anatomical and functional early characterization of atherosclerosis. For this, we have developed hydroxyapatite (HAP)-multitag, a bisphosphonatefunctionalized 68Ga core-doped magnetic nanoparticle showing high affinity toward most common calcium salts present in microcalcifications, particularly HAP. We characterized this interaction in vitro and in vivo, showing a massive uptake in the atherosclerotic lesion identified by positron emission tomography (PET) and positive contrast magnetic resonance imaging (MRI). In addition, this accumulation was found to be dependent on the calcification progression, with a maximum uptake in the microcalcification stage. These results confirmed the ability of HAP-multitag to identify vascular calcifications by PET/(T1)MRI during the vulnerable stages of the plaque progression.