Pasar al contenido principal

DINAMICA DE LAS PROTEINAS DE LA MATRIZ EN LA INTERFASE CELULA-MATERIAL

MAT2009-14440-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dorsal and Ventral Stimuli in Cell-Material Interactions: Effecton Cell Morphology

  • Ballester Beltrán, José
  • Lebourg, Myriam Madeleine
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
Cells behave differently between bidimensional (2D) and tridimensional (3D) environments. While most of the in vitro cultures are 2D, most of the in vivo extracellular matrices are 3D, which encourages the development of more relevant culture conditions, seeking to provide more physiological models for biomedicine (e.g., cancer, drug discovery and tissue engineering) and further insights into any dimension-dependent biological mechanism. In this study, cells were cultured between two protein coated surfaces (sandwich-like culture). Cells used both dorsal and ventral receptors to adhere and spread, undergoing morphological changes with respect to the 2D control. Combinations of fibronectin and bovine serum albumin on the dorsal and ventral sides led to different cell morphologies, which were quantified from bright field images by calculating the spreading area and circularity. Although the mechanism underlying these differences remains to be clarified, excitation of dorsal receptors by anchorage to extracellular proteins plays a key role on cell behavior. This approach-sandwich-like culture-becomes therefore a versatile method to study cell adhesion in well-defined conditions in a quasi 3D environment. © The Author(s) 2012., The support of the project MAT2009-14440-C02-01 and FPU program AP2009-3626 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of topological cues on material-driven fibronectinfibrillogenesis and cell differentiation

  • Ballester Beltrán, José
  • Cantini, Marco
  • Lebourg, Myriam Madeleine
  • García, Andrés J.
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
[EN] Fibronectin (FN) assembles into fibrillar networks by cells through an integrin-dependent mechanism. We have recently shown that simple FN adsorption onto poly(ethyl acrylate) surfaces (PEA), but not control polymer (poly(methyl acrylate), PMA), also triggered FN organization into a physiological fibrillar network. FN fibrils exhibited enhanced biological activities in terms of myogenic differentiation compared to individual FN molecules. In the present study, we investigate the influence of topological cues on the material-driven FN assembly and the myogenic differentiation process. Aligned and random electrospun fibers were prepared. While FN fibrils assembled on the PEA fibers as they do on the smooth surface, the characteristic distribution of globular FN molecules observed on flat PMA transformed into non-connected FN fibrils on electrospun PMA, which significantly enhanced cell differentiation. The direct relationship between the fibrillar organization of FN at the material interface and the myogenic process was further assessed by preparing FN gradients on smooth PEA and PMA films. Isolated FN molecules observed at one edge of the substrate gradually interconnected with each other, eventually forming a fully developed network of FN fibrils on PEA. In contrast, FN adopted a globular-like conformation along the entire length of the PMA surface, and the FN gradient consisted only of increased density of adsorbed FN. Correspondingly, the percentage of differentiated cells increased monotonically along the FN gradient on PEA but not on PMA. This work demonstrates an interplay between material chemistry and topology in modulating material-driven FN fibrillogenesis and cell differentiation. © 2011 Springer Science+Business Media, LLC., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was supported by funds for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface mobility regulates skeletal stem cell differentiation

  • González García, Cristina
  • Oreffo, Richard O.C.
  • Dalby, Matthew J.
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
A family of polymer substrates which consists of a vinyl backbone chain with the side groups -COO(CH2)(x)H, with x = 1, 2, 4, was prepared. Substrates with similar chemical groups but decreasing stiffness, characterized by their elastic modulus at 37 degrees C, as well as surface mobility, characterized by the glass transition temperature, were obtained. We have investigated whether these subtle variations in polymer chemistry lead to alterations in fibronectin (FN) adsorption and mesenchymal stem cell response. The same FN density was adsorbed on every substrate (similar to 450 ng cm(-2)) although the supramolecular organization of the protein at the material interface, as obtained with AFM, was different for x = 1 and the other two surfaces (x = 2, 4). Consequently, this allows one to investigate the effect of physical properties of the matrix on stem cell differentiation after ruling out any influence of protein activity. Cell adhesion was quantified by calculating the size distribution of focal adhesions. Mesenchymal stem cell differentiation to the osteoblastic lineage was determined by quantifying protein levels for osteocalcin, osteopontin and Runx2, in the absence of any additional osteogenic soluble factors in the culture media, but as a direct effect of material properties. The findings indicate the potential to modulate skeletal progenitor cell commitment to the osteoblastic lineage through surface mobility of the underlying material surface., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Dalby and Oreffo are supported by BBSRC grant NanoStem (BB/G008868/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subtle variations in polymer chemistry modulates substrate stiffness and fibronectin activity

  • Brizuela Guerra, Nayrim
  • González-García, Cristina
  • Llopis, Virginia
  • Rodriguez-Hernandez, Jose Carlos
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Rico Tortosa, Patricia María
[EN] A family of polymer substrates which consists of a vinyl backbone chain with the side groups ¿COO(CH2)xCH3, with x ¿ 0, 1, 3, 5 was prepared. Substrates with decreasing stiffness, characterised by the elastic modulus at 37 C, and similar chemical groups were obtained. Firstly, we have investigated whether these minute variations in polymer chemistry lead to differences in fibronectin (FN) adsorption: the same FN density was obtained on every substrate (450 ng cm2 ) but the supramolecular organisation of the protein at the material interface, as obtained with AFM, was different for x ¿ 0 and the other surfaces (x ¿ 1, 3, 5). Consequently, this allows one to use a set of substrates (x ¿ 1, 3, 5) to investigate the effect of substrate stiffness on cell behavior as the unique physical parameter, i.e. after ruling out any influence of the length of the side group on protein conformation. Moreover, the importance of investigating the intermediate layer of proteins at the cellmaterial interface is stressed: the effect of x ¿ 0 and x ¿ 1 on cell behavior cannot be ascribed to the different stiffness of the substrate anymore, since the biological activity of the protein on the material surface was also different. Afterwards, initial cellular interaction was investigated using MC3T3-E1 osteoblasts-like cells and focusing on actin cytoskeleton development, focal adhesion formation and the ability of cells to reorganize the adsorbed FN layer on the different substrates. Image analysis was used to quantify the frequency distribution of the focal plaques, which revealed broader distributions on the stiffer substrates, with formation of larger focal plaques revealing that cells exert higher forces on stiffer substrates., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is kindly acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was supported by funds for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlled wettability, same chemistry: biological activity of plasma-polymerized coatings

  • Cantini, Marco
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Plasma polymerization was used to produce novel nanometric coatings able to direct fibronectin adsorption and cell response. Using ethyl acrylate as a monomer, we obtain coatings whose chemical composition maintains some of the characteristic functionalities of the photo-initiated polymer, while the water contact angle increases monotonically with the duration of the plasma discharge. Enhanced surface mobility of the polymer chains due to a decrease of the thickness of the coating justifies this increase in wettability at lower treatment times. The coatings with higher surface mobility are shown to promote a more active conformation of the adsorbed protein, as proved by binding of the monoclonal antibodies HFN7.1 and mAb1937. Culture of MC3T3-E1 osteoblast-like cells onto the fibronectin-coated substrates further proves that the more mobile surfaces support better initial cell adhesion, even at low fibronectin surface density, as well as stronger cell-mediated fibronectin reorganization., The authors would like to acknowledge the financial support of the Spanish Ministry of Science and Innovation through the project MAT2009-14440-C02-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of material-driven fibronectin fibrillogenesis in cell differentiation

  • Salmerón Sánchez, Manuel
  • Lee, Ted T.
  • Schwarzbauer, Jean E.
  • Garcia, Andres J.
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Fibronectin (FN) is a ubiquitous extracellular matrix protein (ECM) protein that is organized into fibrillar networks by cells through an integrin-mediated process that involves contractile forces. This assembly allows for the unfolding of the FN molecule, exposing cryptic domains that are not available in the native globular FN structure and activating intracellular signalling complexes. However, organization of FN into a physiological fibrillar network upon adsorption on a material surface has not been observed. Here we demonstrate cell-free, material-induced FN fibrillogenesis into a biological matrix with enhanced cellular activities. We found that simple FN adsorption onto poly(ethyl acrylate) surfaces, but not control polymers, triggered FN organization into a fibrillar network via interactions in the amino-terminal 70 kDa fragment, which is involved in the formation of cell-mediated FN fibrils. Moreover, the material-driven FN fibrils exhibited enhanced biological activities in terms of myogenic differentiation compared to individual FN molecules and even type I collagen. Our results demonstrate that molecular assembly of FN can take place at the material interface, giving rise to a physiological protein network similar to fibrillar matrices assembled by cells. This research identifies material surfaces that trigger the organization of extracellular matrix proteins into biological active fibrils and establishes a new paradigm to engineer ECM-mimetic biomaterials., This work was supported by NSF DMR-0909002 and MAT2009-14440-C02-01. MSS was supported by the Spanish Government through PR2009-0351 to stay in Atlanta (Georgia Institute of Technology) for a sabbatical during 2010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of superhydrophobicity in the biological activity of fibronectin at the cell¿material interface

  • Ballester Beltrán, José
  • Song, Wenlong
  • Mano, Joao F
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Protein adsorption and cellular behavior depend strongly on the wettability of substrates. Such studies are scarce for surfaces exhibiting extreme values of contact angles. Fibronectin (FN) adsorption and adhesion of MC3T3-E1 cells were investigated on superhydrophobic polystyrene (SH-PS) surfaces and compared with the corresponding smooth polystyrene (PS) substrate and the control glass. The FN surface density was lower on the SH-PS than on PS, and the adsorbed protein showed altered conformation of cell adhesion domains, as obtained by ELISA with monoclonal antibodies. Cell adhesion occurred on the SH-PS without the formation of mature focal adhesions, as assessed by immunofluorescence for vinculin, talin and paxillin. Correspondingly, the development of the actin cytoskeleton was delayed and without the presence of defined F-actin fibers. FAK phosphorylation was reduced on SH-PS, as compared with PS and the control glass. Also, cell contractility was diminished on the SH-PS as revealed by phosphorylation of myosin light chain (pMLC). Likewise, FN reorganization and secretion were impaired on the superhydrophobic surfaces. Cell proliferation was significantly lower in SH-PS as compared with PS up to 21 days of culture. © 2011 The Royal Society of Chemistry., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was supported by funds for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arrangement of Type IV Collagen and Laminin on Substrates with Controlled Density of ¿OH Groups

  • Coelho, Nuno Miranda
  • González García, Cristina
  • Salmerón Sánchez, Manuel
  • Altankov, George
Collagen IV (Col IV) and laminin (Lam) are the main structural components of the basement membrane where they form two overlapping polymeric networks. We studied the adsorption pattern of these proteins on five model surfaces with tailored density of-OH groups obtained by copolymerization of different ratios ethyl acrylate (EA) and hydroxyl EA (HEA): X OH=0, X OH=0.3, X OH=0.5, X OH=0.7, and X OH=1 (where X refers the ratio of HEA). Atomic force microscopy revealed substratum-specific adsorption patterns of Col IV and Lam, ranging from single molecules deposition on more hydrophilic substrata to the formation of complex networks on hydrophobic ones. Human umbilical endothelial cells were used to study the biological performance of adsorbed proteins, following the overall cell morphology, the quantities for cell adhesion and spreading, and the development of focal adhesion complexes and actin cytoskeleton. Surprisingly, two optima in the cellular interaction were observed-one on the most hydrophilic X OH=1 and other on the relatively hydrophobic X OH=0.3 substrate-valid for both Col IV and Lam. When the proteins were adsorbed consecutively, a hydrophobic shift to X OH=0 substratum was obtained. Collectively, these data suggest that varying with the density of-OH groups one can tailor the conformation and the functional activity of adsorbed basement membrane proteins. © 2011, Mary Ann Liebert, Inc., AFM was performed under the technical guidance of the Microscopy Service at the Universidad Politecnica de Valencia, whose advice is greatly appreciated. The work was supported by the Spanish Ministry of Science and Innovation through project nos. MAT2009-14440-C02-0 and MAT2009-14440-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure and properties of epoxt/polyaniline nanocomposites

  • Krakovsky, Ivan
  • Varga, Martin
  • Salmerón-Sánchez, Manuel
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Sabater i Serra, Roser|||0000-0002-5550-7066
[EN] Epoxy/polyaniline nanocomposites have been prepared by in situ polymerization of aniline carried out in hydrophilic epoxy networks based on polyoxyethylene (POE) swollen in aqueous solutions of aniline hydrochloride. Formation of polyaniline (PANI) nanoparticles in water-rich phase of swollen networks has been revealed by transmission electron microscopy and infrared spectroscopy. The nanoparticles are dispersed in elastomeric matrix, suppress effectively crystallization of POE and increase glass transition temperature of the matrix. © 2011 Elsevier B.V. All rights reserved., Financial support from the Ministry of Education of the Czech Republic (project MSM 0021620835) and European Community's Seventh Framework Program FP7/2007-2013 under grant agreement No 218331 NaPolyNet is gratefully acknowledged. The authors appreciate a generous gift of the polymers used in this study, by Huntsman Corporation. The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molecular mobility in biodegradable poly(e-caprolactone)/poly(hydroxyethyl acrylate) networks

  • Sabater i Serra, Roser|||0000-0002-5550-7066
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Kyritsis, A.
  • Escobar Ivirico, J.L.
  • Pissis, P.
  • Salmerón Sánchez, Manuel
[EN] Poly( ε -caprolactone)/poly(hydroxyethyl acrylate) networks have been investigated by thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The introduction of hydrophilic units (HEA) in the system aiming at tailoring the hydrophilicity of the system results in a series of copolymer networks with microphase separation into hydrophobic/hydrophilic domains. Polycaprolactone (PCL) crystallization is prevented by the topological constraints HEA units imposed in such heterogeneous domains. Moreover, the mobility of the amorphous PCL chains is enhanced as revealed by the main relaxation process which becomes faster. The glass transition of PHEA-rich domains shifts to lower temperatures, as the total amount of PCL in the copolymer increases, due to the presence of PCL units within the same region. The behaviour of the copolymer networks swollen with different content of water has been investigated to analyze the interaction between water molecules and hydrophobic/hydrophilic domains and provide further insights into the molecular structure of the system., RSS acknowledges Generalitat Valenciana for the support through the grant BEST/2008. JLEI acknowledges the support of the Ministerio de Ciencia e Innovacion through the "Campus de Excelencia Internacional" program consistent with Universitat Politecnica de Valencia. The support of the Ministerio de Ciencia e Innovacion through projects MAT2009-14440-C02-01 and MAT2008-06434 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 20082011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fibronectin distribution on demixed nanoscale topographies

  • Perez Garnes, Manuel
  • González García, Cristina
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
  • Rico Tortosa, Patricia María
[EN] Purpose: It is known that surface nanotopography influences cell adhesion and differentiation. Our aim is to analyze the effect of nanoscale topography on fibronectin adsorption and, afterwards, on cell adhesion in order to rationalize the cell-material interaction by focusing on the state of the intermediate layer of adsorbed fibronectin at the material interphase. Methods: Nanotopographic surfaces were produced by demixing of thin film polymer blends - PLLA and PS - during a high speed spin-casting process. Fibronectin (FN) was adsorbed on the different nanotopographies and the protein distribution was directly observed by atomic force microscopy (AFM). The fraction of the surface covered by the protein was quantified by image analysis, as well as the distribution of FN between peaks and valleys. Focal adhesion protein -vinculin- was immunostained and quantified by image analysis on the different nanoscale surfaces. Results: Different nanoscale domains were obtained by changing the composition of the system within a height range of 3 nm to 30 nm. FN tends to adsorb on the peaks of nanoisland topographies, especially in compositions that did not enhance cell adhesion. Moreover, protein distribution between valleys and peaks alters the size of focal adhesion plaques, which grew larger on surfaces with an even distribution of fibronectin. Conclusions: Our results suggest that the surface nanotopography is a key material property capable of influencing protein adsorption. Additionally, the distribution of the protein on the different samples was correlated to the initial ability of cells to adhere in terms of the size of the focal plaques. © 2011 Wichtig Editore., This studied was funded by the Spanish Ministry of Science and Innovation through MAT2009-14440-C02-01 and TEC2009-14128 grants. CIBER-BBN is an initiative funded by the VI National R&D&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was supported by funds for research in the field of Regenerative Medicine through the collaboration agreement with the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Arrangement of Type IV Collagen on NH2 and COOH Functionalized Surfaces

  • Miranda Coelho, Nuno
  • González García, Cristina
  • Salmerón Sánchez, Manuel
  • Altankov, George
Apart from the paradigm that cell-biomaterials interaction depends on the adsorption of soluble adhesive proteins we anticipate that upon distinct conditions also other, less soluble ECM proteins such as collagens, associate with the biomaterials interface with consequences for cellular response that might be of significant bioengineering interest. Using atomic force microscopy (AFM) we seek to follow the nanoscale behavior of adsorbed type IV collagen (Col IV)-a unique multifunctional matrix protein involved in the organization of basement membranes (BMs) including vascular ones. We have previously shown that substratum wettability significantly affects Col IV adsorption pattern, and in turn alters endothelial cells interaction. Here we introduce two new model surfaces based on self-assembled monolayers (SAMs), a positively charged -NH 2, and negatively charged -COOH surface, to learn more about their particular effect on Col IV behavior. AFM studies revealed distinct pattern of Col IV assembly onto the two SAMs resembling different aspects of network-like structure or aggregates (suggesting altered protein conformation). Moreover, the amount of adsorbed FITC-labeled Col IV was quantified and showed about twice more protein on NH 2 substrata. Human umbilical vein endothelial cells attached less efficiently to Col IV adsorbed on negatively charged COOH surface judged by altered cell spreading, focal adhesions formation, and actin cytoskeleton development. Immunofluorescence studies also revealed better Col IV recognition by both ¿ 1 and ¿ 2 integrins on positively charged NH 2 substrata resulting in higher phosphorylated focal adhesion kinase recruitment in the focal adhesion complexes. On COOH surface, no integrin clustering was observed. Taken altogether these results, point to the possibility that combined NH 2 and Col IV functionalization may support endothelization of cardiovascular implants. © 2011 Wiley Periodicals, Inc., AFM was performed under the technical guidance of the Microscopy Service at the Universidad Politecnica de Valencia, whose advice is greatly appreciated. The work was supported by the Spanish Ministry of Science and Innovation through projects MAT2009-14440-C02-01 and MAT2009-14440-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fibrinogen organization at the cell-material interface directs endothelial cell behavior

  • Gugutkov, Dencho
  • González García, Cristina
  • Altankov, George
  • Salmerón Sánchez, Manuel
[EN] Fibrinogen (FG) adsorption on surfaces with controlled fraction of -OH groups was investigated with AFM and correlated to the initial interaction of primary endothelial cells (HUVEC). The -OH content was tailored making use of a family of copolymers consisting of ethyl acrylate (EA) and hydroxyl ethyl acrylate (HEA) in different ratios. The supramolecular distribution of FG changed from an organized network-like structure on the most hydrophobic surface (-OH 0) to dispersed molecular aggregate one as the fraction of -OH groups increases, indicating a different conformation by the adsorbed protein. The best cellular interaction was observed on the most hydrophobic (-OH 0) surface where FG assembled in a fibrin-like appearance in the absence of any thrombin. Likewise, focal adhesion formation and actin cytoskeleton development was poorer as the fraction of hydroxy groups on the surface was increased. The biological activity of the surface-induced FG network to provide 3D cues in a potential tissue engineered scaffold, making use of electrospun PEA fibers (-OH 0), seeded with human umbilical vein endothelial cells was investigated. The FG assembled on the polymer fibers gave rise to a biologically active network able to direct cell orientation along the fibers (random or aligned), promote cytoskeleton organization and focal adhesion formation. © 2011 The Author(s)., AFM was performed under the technical guidance of the Microscopy Service at the Universidad Politecnica de Valencia, whose advice is greatly appreciated. The work was supported by the Spanish Ministry of Science and Innovation through projects nos MAT2009-14440-C02-01, MAT2009-14440-C02-02 and EULANEST PIM2010EEU-00111.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of surface chemistry in protein remodeling at the cell-material interface

  • Llopis Hernández, Virginia
  • Ballester Beltrán, José
  • Salmerón Sánchez, Manuel
  • Rico Tortosa, Patricia María
  • Moratal, David|||0000-0002-2825-3646
Background: The cell-material interaction is a complex bi-directional and dynamic process that mimics to a certain extent the natural interactions of cells with the extracellular matrix. Cells tend to adhere and rearrange adsorbed extracellular matrix (ECM) proteins on the material surface in a fibril-like pattern. Afterwards, the ECM undergoes proteolytic degradation, which is a mechanism for the removal of the excess ECM usually approximated with remodeling. ECM remodeling is a dynamic process that consists of two opposite events: assembly and degradation. Methodology/Principal Findings: This work investigates matrix protein dynamics on mixed self-assembled monolayers (SAMs) of -OH and -CH3 terminated alkanethiols. SAMs assembled on gold are highly ordered organic surfaces able to provide different chemical functionalities and well-controlled surface properties. Fibronectin (FN) was adsorbed on the different surfaces and quantified in terms of the adsorbed surface density, distribution and conformation. Initial cell adhesion and signaling on FN-coated SAMs were characterized via the formation of focal adhesions, integrin expression and phosphorylation of FAKs. Afterwards, the reorganization and secretion of FN was assessed. Finally, matrix degradation was followed via the expression of matrix metalloproteinases MMP2 and MMP9 and correlated with Runx2 levels. We show that matrix degradation at the cell material interface depends on surface chemistry in MMP-dependent way. Conclusions/Significance: This work provides a broad overview of matrix remodeling at the cell-material interface, establishing correlations between surface chemistry, FN adsorption, cell adhesion and signaling, matrix reorganization and degradation. The reported findings improve our understanding of the role of surface chemistry as a key parameter in the design of new biomaterials. It demonstrates the ability of surface chemistry to direct proteolytic routes at the cell-material interface, which gains a distinct bioengineering interest as a new tool to trigger matrix degradation in different biomedical applications. © 2011 Llopis-Hernández et al., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was supported by funds for research in the field of Regenerative Medicine through the collaboration agreement from the Conselleria de Sanidad (Generalitat Valenciana), and the Instituto de Salud Carlos III. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-monotonic cell differentiation pattern on extreme wettability gradients

  • Cantini, Marco
  • Sousa, Maria
  • Mano, Joao F.
  • Salmerón Sánchez, Manuel
  • Moratal, David|||0000-0002-2825-3646
[EN] In this study, we propose a methodology to obtain a family of biomimetic substrates with a hierarchical rough topography at the micro and nanoscale that span the entire range of wettability, from the superhydrophobic to the superhydrophilic regime, through an Ar-plasma treatment at increasing durations. Moreover, we employ the same approach to produce a superhydrophobic-to- superhydrophilic surface gradient along centimetre-length scale distances within the same sample. We characterize the biological activity of these surfaces in terms of protein adsorption and cell response, using fibronectin, a major component of the extracellular matrix, and C2C12 cells, a myoblast cell line. Fibronectin conformation, assessed via binding of the monoclonal antibody HFN7.1, exhibits a non-monotonic dependence on surface wettability, with higher activity on hydrophilic substrates (WCA = 38.6 ± 8.1°). On the other hand, the exposition of cell-binding epitopes is diminished on the surfaces with extreme wetting properties, the conformation being particularly altered on the superhydrophobic substrate. The assessment of cell response via the myogenic differentiation process reveals that a gradient surface promotes a different response with respect to cells cultured on discrete uniform samples: even though in both cases the same non-monotonic differentiation pattern is found, the differential response to the various wettabilities is enhanced along the gradient while the overall levels of differentiation are diminished. On a gradient surface cells are in fact exposed to a range of continuously changing stimuli that foster cell migration and detain the differentiation process. © 2013 The Royal Society of Chemistry., The support of the Spanish Ministry of Science and Innovation through project MAT2009-14440-C02-01 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.