Pasar al contenido principal

TECNOLOGIA DE ESPUMAS POLIMERICAS Y MATERIALES COMPUESTOS CELULARES MULTIFUNCIONALES

MAT2011-26410

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario CENTRE CATALA DEL PLASTIC
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behaviour

  • Haurie, Laia
  • Serrano, Susana
  • Bosch González, Montse
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Phase change materials are a promising strategy to reduce energy consumption in a wide range of applications including the building sector. Many studies have been done to evaluate the impact of PCM on thermal properties of building materials, however there exists little information on the influence of PCM on other properties of the support materials. This knowledge is necessary to determine the feasibility to apply and use building materials containing PCM. In this paper, the effect of the addition of different percentages of microencapsulated phase change material on the properties of two commercial single layer mortars has been studied. Physical and thermal properties as well as fire reaction have been evaluated., The work is partially funded by the Spanish Government(ENE2011-28269-C03-02 and MAT2011-26410). The authorswould like to thank the Catalan Government for the quality accredi-tation given to their research group GREA (2014 SGR 123), researchgroup DIOPMA (2014 SGR 1543) and research group GICITED (2014SGR 1298).The work leading to this invention has received fundingfrom the European Union’s Seventh Framework Programme(FP7/2007-2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Gypsum has two important states (fresh and hardened states), and the addition of phase change materials (PCM) can vary the properties of the material. Many authors have extensively studied properties in the hardened state; however, the variation of fresh state properties due to the addition of Micronalr DS 5001 X PCM into gypsum has been the object of few investigations. Properties in fresh state define the workability, setting time, adherence and shrinkage, and, therefore the possibility of implementing the material in building walls. The aim of the study is to analyze, compare and evaluate the variability of fresh state properties after the inclusion of 10% PCM. PCM are added into a common gypsum matrix by three different methods: adding microencapsulated PCM, making a suspension of PCM/water, and incorporating PCM through a vacuum impregnation method. Results demonstrate that the inclusion of PCM change completely the water required by the gypsum to achieve good workability, especially the formulation containing Micronalr DS 5001 X: the water required is higher, the retraction is lower (50% less) due to the organic nature of the PCM with high elasticity and, the adherence is reduced (up to 45%) due to the difference between the porosity of the different surfaces as well as the surface tension difference., The work is partially funded by the Spanish government (ENE2011-28269-C03-02 and MAT2011-26410). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA-UdL (2014 SGR 123) and research group DIOPMA-UB (2014 SGR 1543) and GICITED-UPC (2014 SGR 1298). In addition, the research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n˝ PIRSES-GA-2013-610692 (INNOSTORAGE).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Gypsum has two important states (fresh and hardened states), and the addition of phase change materials (PCM) can vary the properties of the material. Many authors have extensively studied properties in the hardened state; however, the variation of fresh state properties due to the addition of Micronalr DS 5001 X PCM into gypsum has been the object of few investigations. Properties in fresh state define the workability, setting time, adherence and shrinkage, and, therefore the possibility of implementing the material in building walls. The aim of the study is to analyze, compare and evaluate the variability of fresh state properties after the inclusion of 10% PCM. PCM are added into a common gypsum matrix by three different methods: adding microencapsulated PCM, making a suspension of PCM/water, and incorporating PCM through a vacuum impregnation method. Results demonstrate that the inclusion of PCM change completely the water required by the gypsum to achieve good workability, especially the formulation containing Micronalr DS 5001 X: the water required is higher, the retraction is lower (50% less) due to the organic nature of the PCM with high elasticity and, the adherence is reduced (up to 45%) due to the difference between the porosity of the different surfaces as well as the surface tension difference., The work is partially funded by the Spanish government (ENE2011-28269-C03-02 and MAT2011-26410). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA-UdL (2014 SGR 123) and research group DIOPMA-UB (2014 SGR 1543) and GICITED-UPC (2014 SGR 1298). In addition, the research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n˝ PIRSES-GA-2013-610692 (INNOSTORAGE).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

  • Serrano, Susana
  • Barreneche Güerisoli, Camila
  • Navarro Ezquerra, Antonia
  • Haurie, Laia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
The building sector is one of the highest energy consumers representing around 30% of total energy use. One of the recommendations of the IEA (International Energy Agency) to reduce energy consumption in buildings is to enhance the thermal performance of building envelopes. In the present study, PCM (Phase Change Material) gypsum materials have been manufactured using three different PCM inclusion methods and a thin layer of gypsum without PCM is added as external layer with the aim of improving the fire reaction behaviour. By performing a detailed physical, mechanical and thermal characterization, the suitability of the materials to be implemented in the building envelope as inner coating is demonstrated. Results show that also the thermal properties are improved in the three cases by the addition of PCM. Moreover, the negative effect of adding paraffin wax PCM into gypsum against flame can be easily reduced by the addition of a thin gypsum layer, which is a low tech and cheap solution without extra environmental impact., The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R, ENE2015-64117-C5-2-R, MAT2011-26410 and BIA2014-52688-R). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREA - UdL (2014 SGR 123) and research group DIOPMA - UB (2014 SGR 1543) and GICITED − UPC (2014 SGR 1298). In addition, this project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement N° PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behaviour

  • Haurie, Laia
  • Serrano, Susana
  • Bosch González, Montse
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Phase change materials are a promising strategy to reduce energy consumption in a wide range of applications including the building sector. Many studies have been done to evaluate the impact of PCM on thermal properties of building materials, however there exists little information on the influence of PCM on other properties of the support materials. This knowledge is necessary to determine the feasibility to apply and use building materials containing PCM. In this paper, the effect of the addition of different percentages of microencapsulated phase change material on the properties of two commercial single layer mortars has been studied. Physical and thermal properties as well as fire reaction have been evaluated., The work is partially funded by the Spanish Government(ENE2011-28269-C03-02 and MAT2011-26410). The authorswould like to thank the Catalan Government for the quality accredi-tation given to their research group GREA (2014 SGR 123), researchgroup DIOPMA (2014 SGR 1543) and research group GICITED (2014SGR 1298).The work leading to this invention has received fundingfrom the European Union’s Seventh Framework Programme(FP7/2007-2013) under grant agreement no. PIRSES-GA-2013-610692 (INNOSTORAGE)