Pasar al contenido principal

NUEVOS BIOMATERIALES METALICOS BIOFUNCIONALIZADOS PARA APLICACIONES ORTOPEDICAS, DENTALES Y CARDIOVASCULARES

MAT2012-30706

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Anhydride-functional silane immobilized onto titanium surfaces induces osteoblast cell differentiation and reduces bacterial adhesion and biofilm formation

  • Godoy Gallardo, Maria|||0000-0002-7232-3998
  • Guillem Martí, Jordi|||0000-0003-0307-2221
  • Sevilla Sánchez, Pablo
  • Manero Planella, José María|||0000-0002-1673-4389
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Rodríguez Rius, Daniel|||0000-0001-6286-5200
Bacterial infection in dental implants along with osseointegration failure usually leads to loss of the device. Bioactive molecules with antibacterial properties can be attached to titanium surfaces with anchoring molecules such as silanes, preventing biofilm formation and improving osseointegration. Properties of silanes as molecular binders have been thoroughly studied, but research on the biological effects of these coatings is scarce. The aim of the present study was to determine the in vitro cell response and antibacterial effects of triethoxysilypropyl succinic anhydride (TESPSA) silane anchored on titanium surfaces. X-ray photoelectron spectroscopy confirmed a successful silanization. The silanized surfaces showed no cytotoxic effects. Gene expression analyses of Sarcoma Osteogenic (SaOS-2) osteoblast-like cells cultured on TESPSA silanized surfaces reported a remarkable increase of biochemical markers related to induction of osteoblastic cell differentiation. A manifest decrease of bacterial adhesion and biofilm formation at early stages was observed on treated substrates, while favoring cell adhesion and spreading in bacteria-cell co-cultures.; Surfaces treated with TESPSA could enhance a biological sealing on implant surfaces against bacteria colonization of underlying tissues. Furthermore, it can be an effective anchoring platform of biomolecules on titanium surfaces with improved osteoblastic differentiation and antibacterial properties. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of bone loss in antibacterial coated dental implants: an experimental study in dogs

  • Godoy Gallardo, María
  • Manzanares, Maria Cristina
  • Sevilla Sánchez, Pablo
  • Nart, José
  • Manzanares, Norberto
  • Manero Planella, José María|||0000-0002-1673-4389
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Boyd, Steven K.
  • Rodríguez Rius, Daniel|||0000-0001-6286-5200
The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar sites of 5 beagle dogs. Sites were randomly assigned to Ti (untreated implants, 10 units), Ti_Ag (silver electrodeposition treatment, 10 units), and Ti_TSP (silanization treatment, 10 units). Coated implants were characterized by scanning electron microscopy, interferometry and X-ray photoelectron spectroscopy. Two months after implant insertion, experimental peri-implantitis was initiated by ligature placement. Ligatures were removed 2 months later, and plaque formation was allowed for 2 additional months. Clinical and radiographic analyses were p¬erformed during the study. Implant-tissue samples were prepared for micro computed tomography, backscattered scanning electron microscopy, histomorphometric and histological analyses and ion release measurements. X-ray, SEM and histology images showed that vertical bone resorption in treated implants was lower than in the control group (P < 0.05). This effect is likely due to the capacity of the treatments to reduce bacteria colonization on the implant surface. Histological analysis suggested an increase of peri-implant bone formation on silanized implants. However, the short post-ligature period was not enough to detect differences in clinical parameters among implant groups. Within the limits of this study, antibacterial surface treatments have a positive effect against bone resorption induced by peri-implantitis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Mimicking bone extracellular matrix: Integrin-binding peptidomimetics enhance osteoblast-like cells adhesion, proliferation, and differentiation on titanium

  • Fraioli, Roberta
  • Rechenmacher, Florian
  • Neubauer, Stefanie
  • Manero Planella, José María|||0000-0002-1673-4389
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Kessler, Horst
  • Mas Moruno, Carlos|||0000-0001-8337-0872
Interaction between the surface of implants and biological tissues is a key aspect of biomaterials research. Apart from fulfilling the non-toxicity and structural requirements, synthetic materials are asked to direct cell response, offering engineered cues that provide specific instructions to cells. This work explores the functionalization of titanium with integrin-binding peptidomimetics as a novel and powerful strategy to improve the adhesion, proliferation and differentiation of osteoblast-like cells to implant materials. Such biomimetic strategy aims at targeting integrins alpha v beta 3 and alpha 5 beta 1, which are highly expressed on osteoblasts and are essential for many fundamental functions in bone tissue development. The successful grafting of the bioactive molecules on titanium is proven by contact angle measurements, X-ray photoelectron spectroscopy and fluorescent labeling. Early attachment and spreading of cells are statistically enhanced by both peptidomimetics compared to unmodified titanium, reaching values of cell adhesion comparable to those obtained with full-length extracellular matrix proteins. Moreover, an increase in alkaline phosphatase activity, and statistically higher cell proliferation and mineralization are observed on surfaces coated with the peptidomimetics. This study shows an unprecedented biological activity for low-molecular-weight ligands on titanium, and gives striking evidence of the potential of these molecules to foster bone regeneration on implant materials. (c) 2015 Elsevier B.V. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modification of titanium surfaces by adding antibiotic-loaded PHB spheres and PEG for biomedical applications

  • Rodriguez Contreras, Alejandra
  • Marqués Calvo, M. Soledad|||0000-0003-1735-1838
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Manero Planella, José María|||0000-0002-1673-4389
Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial properties. Therefore, the aim of this work is to develop a method of combining the antibacterial properties of antibiotic-loaded poly(3-hydroxybutyrate) (PHB) nano-and micro-spheres and poly(ethylene glycol) (PEG) as an antifouling agent, with titanium (Ti), as the base material for implants, in order to obtain surfaces with antibacterial activity. The Ti surfaces were linked to both PHB particles and PEG by a covalent bond. This attachment was carried out by firstly activating the surfaces with either Oxygen plasma or Sodium hydroxide. Further functionalization of the activated surfaces with different alkoxysilanes allows the reaction with PHB particles and PEG. The study confirms that the Ti surfaces achieved the antibacterial properties by combining the antibiotic-loaded PHB spheres, and PEG as an antifouling agent.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of fluid leakages in the different screw-retained implant-abutment connections in a mechanical artificial mouth

  • Martin Gili, David
  • Molmeneu Trias, Meritxell
  • Fernández Yagüe, Marc Antoni
  • Punset Fuste, Miquel
  • Giner Tarrida, Lluís
  • Armengou, Jaume
  • Gil Mur, Francisco Javier
This work was supported by CICYT Spanish project MAT-2012-30706 and the Andorra and Catalan Government for CTP grants. The authors are grateful to Soadco® for your support., This study shows the potential risk of microfiltration between two different types of implant-abutment connections screwed at 45 Ncm: external and internal. For the first time the use of a mechanical artificial mouth is used with the values (compression and torsion loads with a frequency of 2 Hz) of the human chewing. The mechanical tests were performed with an artificial saliva at 37 degrees C. The microgap in the connection was measured by an Image Analysis software incorporated in a high resolution scanning electron microscopy. Implant connections were filled with methylene blue by using self-adjustable precision pipettes and the quantity of leakage was determined by high sensitivity spectometry. We showed that the internal connection has lower microgaps compared to the external ones and these microgaps increased with the number of mechanical cycles. The leakage of methylene blue was higher when the external connection was performed. Microgaps and the influence of the mechanical loads are very important for the long-term behavior avoiding the bacteria colonization in the dental implants. These aspects should be known by the implantologists., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Functionalization of CoCr surfaces with cell adhesive peptides to promote HUVECs adhesion and proliferation

  • Castellanos, Maria Isabel
  • Mas-Moruno, Carlos
  • Grau, Anna
  • Serra-Picamal, Xavier
  • Trepat, Xavier
  • Albericio Palomera, Fernando
  • Joner, Michael
  • Gil, FJ
  • Ginebra, Maria-Pau
  • Manero, José María
  • PEGUEROLES, MARTA
Authors acknowledge the Spanish Government for financial support through project MAT2015-67183-R (MINECO/FEDER, UE) and the Agency for Administration of University and Research Grants of the Government of Catalonia [2014 SGR 1333]. M.I.C. would like to thank the Generalitat de Catalunya for funding through a FI Scholarship. C. Mas-Moruno thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia [2011-BP-B-00042] and, Biomimetic surface modification with peptides that have specific cell-binding moieties is a promising approach to improve endothelialization of metal-based stents. In this study, we functionalized CoCr surfaces with RGDS, REDV, YIGSR peptides and their combinations to promote endothelial cells (ECs) adhesion and proliferation. An extensive characterization of the functionalized surfaces was performed by XPS analysis, surface charge and quartz crystal microbalance with dissipation monitoring (QCM-D), which demonstrated the successful immobilization of the peptides to the surface. Cell studies demonstrated that the covalent functionalization of CoCr surfaces with an equimolar combination of RGDS and YIGSR represents the most powerful strategy to enhance the early stages of ECs adhesion and proliferation, indicating a positive synergistic effect between the two peptide motifs. Although these peptide sequences slightly increased smooth muscle cells (SMCs) adhesion, these values were ten times lower than those observed for ECs. The combination of RGDS with the REDV sequence did not show synergistic effects in promoting the adhesion or proliferation of ECs. The strategy presented in this study holds great potential to overcome clinical limitations of current metal stents by enhancing their capacity to support surface endothelialization., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • RODRIGUEZ-CONTRERAS, ALEJANDRA
  • Marqués-Calvo, María Soledad
  • Gil, FJ
  • Manero, José María
  • Hoyos-Nogués, Mireia
  • BROSEL, SERGI
  • Abramova, Natalia
  • Muñoz, Francesc-Xavier
  • Bratov, Andrey
  • Mas-Moruno, Carlos
The authors acknowledge financial support from the Spanish Government through projects CTQ2014-54553-C3-1-R and MAT2012–30706, cofunded by the European Union through European Regional Development Funds, the Government of Catalonia (SGR2009 1039), the Technical University of Catalonia (fellowship of M.H.) and the European Union (Project ENIAC-ED-52v161210, and FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985). This work was partially supported by Government of Russian Federation, Grant 074-U01., Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial properties. Therefore, the aim of this work is to develop a method of combining the antibacterial properties of antibiotic-loaded poly(3-hydroxybutyrate) (PHB) nano- and micro-spheres and poly(ethylene glycol) (PEG) as an antifouling agent, with titanium (Ti), as the base material for implants, in order to obtain surfaces with antibacterial activity. The Ti surfaces were linked to both PHB particles and PEG by a covalent bond. This attachment was carried out by firstly activating the surfaces with either Oxygen plasma or Sodium hydroxide. Further functionalization of the activated surfaces with different alkoxysilanes allows the reaction with PHB particles and PEG. The study confirms that the Ti surfaces achieved the antibacterial properties by combining the antibiotic-loaded PHB spheres, and PEG as an antifouling agent., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Antibacterial properties of hLf1-11 peptide onto titanium surfaces: a comparison study between silanization and surface initiated polymerization

  • Godoy-Gallardo, Maria
  • Mas-Moruno, Carlos
  • Yu, Kai
  • Manero, José María
  • Gil, FJ
  • Kizhakkedathu, Jayachandran
  • Rodríguez Rius, Daniel
This study was supported by the Ministry of Science and Innovation (MICINN) and the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government (Projects: MAT2009-12547, MAT2012-30706 co-funded by the European Union through European Regional Development Funds). C.M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA grant agreement n° 321985)., Dental implant failure can be associated with infections that develop into peri-implantitis. In order to reduce biofilm formation, several strategies focusing on the use of antimicrobial peptides (AMPs) have been studied. To covalently immobilize these molecules onto metallic substrates, several techniques have been developed, including silanization and polymer brush prepared by surface-initiated atom transfer radical polymerization (ATRP), with varied peptide binding yield and antibacterial performance. The aim of the present study was to compare the efficiency of these methods to immobilize the lactoferrin-derived hLf1–11 antibacterial peptide onto titanium, and evaluate their antibacterial activity in vitro. Smooth titanium samples were coated with hLf1–11 peptide under three different conditions: silanization with 3-aminopropyltriethoxysilane (APTES), and polymer brush based coatings with two different silanes. Peptide presence was determined by X-ray photoelectron spectroscopy, and the mechanical stability of the coatings was studied under ultrasonication. The LDH assays confirmed that HFFs viability and proliferation were no affected by the treatments. The in vitro antibacterial properties of the modified surfaces were tested with two oral strains (Streptococcus sanguinis and Lactobacillus salivarius) showing an outstanding reduction. A higher decrease in bacterial attachment was noticed when samples were modified by ATRP methods compared to silanization. This effect is likely due to the capacity to immobilize more peptide on the surfaces using polymer brushes and the nonfouling nature of polymer PDMA segment., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Anhydride-functional silane immobilized onto titanium surfaces induces osteoblast cell differentiation and reduces bacterial adhesion and biofilm formation

  • Godoy Gallardo, Maria
  • Guillem Martí, Jordi
  • Sevilla Sánchez, Pablo
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Rodríguez Rius, Daniel
Bacterial infection in dental implants along with osseointegration failure usually leads to loss of the device. Bioactive molecules with antibacterial properties can be attached to titanium surfaces with anchoring molecules such as silanes, preventing biofilm formation and improving osseointegration. Properties of silanes as molecular binders have been thoroughly studied, but research on the biological effects of these coatings is scarce. The aim of the present study was to determine the in vitro cell response and antibacterial effects of triethoxysilypropyl succinic anhydride (TESPSA) silane anchored on titanium surfaces. X-ray photoelectron spectroscopy confirmed a successful silanization. The silanized surfaces showed no cytotoxic effects. Gene expression analyses of Sarcoma Osteogenic (SaOS-2) osteoblast-like cells cultured on TESPSA silanized surfaces reported a remarkable increase of biochemical markers related to induction of osteoblastic cell differentiation. A manifest decrease of bacterial adhesion and biofilm formation at early stages was observed on treated substrates, while favoring cell adhesion and spreading in bacteria-cell co-cultures.; Surfaces treated with TESPSA could enhance a biological sealing on implant surfaces against bacteria colonization of underlying tissues. Furthermore, it can be an effective anchoring platform of biomolecules on titanium surfaces with improved osteoblastic differentiation and antibacterial properties. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of bone loss in antibacterial coated dental implants: an experimental study in dogs

  • Godoy Gallardo, María
  • Manzanares, Maria Cristina
  • Sevilla Sánchez, Pablo
  • Nart, José
  • Manzanares, Norberto
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Boyd, Steven K.
  • Rodríguez Rius, Daniel
The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar sites of 5 beagle dogs. Sites were randomly assigned to Ti (untreated implants, 10 units), Ti_Ag (silver electrodeposition treatment, 10 units), and Ti_TSP (silanization treatment, 10 units). Coated implants were characterized by scanning electron microscopy, interferometry and X-ray photoelectron spectroscopy. Two months after implant insertion, experimental peri-implantitis was initiated by ligature placement. Ligatures were removed 2 months later, and plaque formation was allowed for 2 additional months. Clinical and radiographic analyses were p¬erformed during the study. Implant-tissue samples were prepared for micro computed tomography, backscattered scanning electron microscopy, histomorphometric and histological analyses and ion release measurements. X-ray, SEM and histology images showed that vertical bone resorption in treated implants was lower than in the control group (P < 0.05). This effect is likely due to the capacity of the treatments to reduce bacteria colonization on the implant surface. Histological analysis suggested an increase of peri-implant bone formation on silanized implants. However, the short post-ligature period was not enough to detect differences in clinical parameters among implant groups. Within the limits of this study, antibacterial surface treatments have a positive effect against bone resorption induced by peri-implantitis., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mimicking bone extracellular matrix: integrin-binding peptidomimetics enhance osteoblast-like cells adhesion, proliferation, and differentiation on titanium

  • Fraioli, Roberta
  • Rechenmacher, Florian
  • Neubauer, Stefanie
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Kessler, Horst
  • Mas Moruno, Carlos
The authors acknowledge the Spanish Government for financial support (Project: MAT2012-30706), co-funded by the European Union through European Regional Development Funds, and the Government of Catalonia (SGR2009 1039). R.F. thanks the Government of Catalonia for financial support through a predoctoral fellowship. C.M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Program (Marie Curie Actions) of the European Union’s Seventh Framework Program (FP7-PEOPLE-2012-CIG, REA grant agreement 321985). The invaluable assistance of Mrs. Montse Dominguez with the XPS measurements and analysis is greatly appreciated. F.R. thanks IGSSE (International Graduate School of Science and Engineering) and Bund der Freunde der TU Munchen ¨e.V. for funding. S.N.thanks CompInt(Materials Science of Complex Interfaces) of the Elite Network of Bavaria and Max Planck Society for financial support. H.K.thanks IAS (Institute for Advanced Study) of Technische Universitat¨ Munchen, ¨ CIPSM (Center for Integrated Protein Science Munich) and King Abdulaziz University (KAU) for technical and financial support (Grant HiCi/25-3-1432)., Interaction between the surface of implants and biological tissues is a key aspect of biomaterials research. Apart from fulfilling the non-toxicity and structural requirements, synthetic materials are asked to direct cell response, offering engineered cues that provide specific instructions to cells. This work explores the functionalization of titanium with integrin-binding peptidomimetics as a novel and powerful strategy to improve the adhesion, proliferation and differentiation of osteoblast-like cells to implant materials. Such biomimetic strategy aims at targeting integrins αvβ3 and α5β1, which are highly expressed on osteoblasts and are essential for many fundamental functions in bone tissue development. The successful grafting of the bioactive molecules on titanium is proven by contact angle measurements, X-ray photoelectron spectroscopy and fluorescent labeling. Early attachment and spreading of cells are statistically enhanced by both peptidomimetics compared to unmodified titanium, reaching values of cell adhesion comparable to those obtained with full-length extracellular matrix proteins. Moreover, an increase in alkaline phosphatase activity, and statistically higher cell proliferation and mineralization are observed on surfaces coated with the peptidomimetics. This study shows an unprecedented biological activity for low-molecular-weight ligands on titanium, and gives striking evidence of the potential of these molecules to foster bone regeneration on implant materials., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanical and physicochemical characterization along with biological interactions of a new Ti25Nb21Hf alloy for bone tissue engineering

  • Herranz-Diez, Carolina
  • Gil Mur, Francisco Javier
  • Guillem Martí, Jordi
  • Manero Planella, José María
The authors would like to thank the Spanish Government for financial support through MAT2012-30706 project co-funded by the EU through European Regional Development Funds and the FI fellowship of the AGAUR Agency. Authors would also like to thank the staff of Fort Wayne Metals for their help with material fabrication and Marc Fernández for corrosion experiments assistance., Nowadays, one of the main challenges in metal implants for bone substitution is the achievement of an elastic modulus close to that of human cortical bone as well as to provide an adequate interaction with the surrounding tissue avoiding in vivo foreign body reaction. From this perspective, a new Ti-based alloy has been developed with Nb and Hf as alloying elements which are known as non-toxic and with good corrosion properties. The microstructure, mechanical behaviour and the physicochemical properties of this novel titanium alloy have been studied. Relationship of surface chemistry and surface electric charge with protein adsorption and cell adhesion has been evaluated due to its role for understanding the mechanism of biological interactions with tissues. The Ti25Nb21Hf alloy presented a lower elastic modulus than commercial alloys with a superior ultimate strength and yield strength than CP-Ti and very close to Ti6Al4V. It also exhibited good corrosion resistance. Furthermore, the results revealed that it had no cytotoxic effect on rat mesenchymal stem cells and allowed protein adsorption and cell adhesion. The experimental results make this alloy a promising material for bone substitution or for biomedical devices., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of bone loss in antibacterial coated dental implants: an experimental study in dogs

  • Godoy Gallardo, Maria
  • Manzanares-Céspedes, Maria Cristina
  • Sevilla Sánchez, Pablo
  • Nart Molina, José
  • Manzanares, Norberto
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Boyd, Steven K.
  • Rodríguez, Daniel
The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar sites of 5 beagle dogs. Sites were randomly assigned to Ti (untreated implants, 10 units), Ti_Ag (silver electrodeposition treatment, 10 units), and Ti_TSP (silanization treatment, 10 units). Coated implants were characterized by scanning electron microscopy, interferometry and X-ray photoelectron spectroscopy. Two months after implant insertion, experimental peri-implantitis was initiated by ligature placement. Ligatures were removed 2 months later, and plaque formation was allowed for 2 additional months. Clinical and radiographic analyses were performed during the study. Implant-tissue samples were prepared for micro computed tomography, backscattered scanning electron microscopy, histomorphometric and histological analyses and ion release measurements. X-ray, SEM and histology images showed that vertical bone resorption in treated implants was lower than in the control group (P < 0.05). This effect is likely due to the capacity of the treatments to reduce bacteria colonization on the implant surface. Histological analysis suggested an increase of peri-implant bone formation on silanized implants. However, the short post-ligature period was not enough to detect differences in clinical parameters among implant groups. Within the limits of this study, antibacterial surface treatments have a positive effect against bone resorption induced by peri-implantitis., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface immobilization and bioactivity of TGF-ß1 inhibitor peptides for bone implant applications

  • Sevilla Sánchez, Pablo
  • Vining, Kyle V.
  • Dotor de las Herrerias, Javier
  • Rodríguez Rius, Daniel
  • Gil Mur, Francisco Javier
  • Aparicio Bádenas, Conrado José
This work was partially supported by the University of Minnesota through a Grant-in-Aid of Research, Artistry, and Scholarly (CA), and the Spanish Ministry of Economy and Competitiveness (project MAT 2012-30706) (FJG). PS acknowledges financial support from the Spanish Minister of Economy and Competitiveness through a fellowship for research stays at international institutions (FPU-MEC). Parts of this work were carried out in the University of Minnesota I.T. Characterization Facility, which receives partial support from NSF through the MRSEC program. Parts of this work were carried out in the Institute for Bioengineering of Catalonia-IBEC., TGF-ß1 is the most related cytokine with the production of fibrotic tissue. It plays an important role on the production of collagen by fibroblasts and other types of cells. The inhibition of this cytokine reduces fibrosis in various types of tissue. Biofunctionalization of dental and orthopedic implants with biomolecules enables modification of the physical, chemical and biochemical properties of their surfaces to improve its biological and clinical performance. Our objective was to develop a reliable method to immobilize oligopeptides on Ti surfaces to obtain a surface with TGF-ß1 inhibitory activity that will potentially minimize fibrotic encapsulation of implants during the process of osseointegration. We covalently immobilized TGF-ß1 inhibitor P17-peptides on Ti surfaces and assessed by characterizing each step of the process that we successfully biofunctionalized the implant surfaces. High amounts of peptides were anchored and homogeneously distributed on the surfaces with mechanical and thermochemical stability after in vitro simulated challenges. Notably, the immobilized peptides retained their TGF-ß1 inhibitory activity in vitro. Thus, these biofunctional coatings are potential candidates for inducing a fast and reliable osseointegration in vivo., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Anhydride-functional silane immobilized onto titanium surfaces induces osteoblast cell differentiation and reduces bacterial adhesion and biofilm formation

  • Godoy-Gallardo, Maria
  • Guillem-Marti, Jordi
  • Sevilla Sánchez, Pablo
  • Manero, José María
  • Gil, FJ
  • Rodríguez Rius, Daniel
This work was supported by Fundación Ramón Areces and the Spanish Government (MINECO) under Grants MAT2009-12547 and MAT2012-30706, both co-funded by the European Union through European Regional Development Funds. M. Godoy-Gallardo and F.J. Gil report that they have a patent (ES patent P201 331756) on the TESPSA silane application., Bacterial infection in dental implants along with osseointegration failure usually leads to loss of the device. Bioactive molecules with antibacterial properties can be attached to titanium surfaces with anchoring molecules such as silanes, preventing biofilm formation and improving osseointegration. Properties of silanes as molecular binders have been thoroughly studied, but research on the biological effects of these coatings is scarce. The aim of the present study was to determine the in vitro cell response and antibacterial effects of triethoxysilypropyl succinic anhydride (TESPSA) silane anchored on titanium surfaces. X-ray photoelectron spectroscopy confirmed a successful silanization. The silanized surfaces showed no cytotoxic effects. Gene expression analyses of Sarcoma Osteogenic (SaOS-2) osteoblast-like cells cultured on TESPSA silanized surfaces reported a remarkable increase of biochemical markers related to induction of osteoblastic cell differentiation. A manifest decrease of bacterial adhesion and biofilm formation at early stages was observed on treated substrates, while favoring cell adhesion and spreading in bacteria–cell co-cultures. Surfaces treated with TESPSA could enhance a biological sealing on implant surfaces against bacteria colonization of underlying tissues. Furthermore, it can be an effective anchoring platform of biomolecules on titanium surfaces with improved osteoblastic differentiation and antibacterial properties., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mimicking bone extracellular matrix: Integrin-binding peptidomimetics enhance osteoblast-like cells adhesion, proliferation, and differentiation on titanium

  • Fraioli, Roberta
  • Rechenmacher, Florian
  • Neubauer, Stefanie
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Kessler, Horst
  • Mas Moruno, Carlos
Interaction between the surface of implants and biological tissues is a key aspect of biomaterials research. Apart from fulfilling the non-toxicity and structural requirements, synthetic materials are asked to direct cell response, offering engineered cues that provide specific instructions to cells. This work explores the functionalization of titanium with integrin-binding peptidomimetics as a novel and powerful strategy to improve the adhesion, proliferation and differentiation of osteoblast-like cells to implant materials. Such biomimetic strategy aims at targeting integrins alpha v beta 3 and alpha 5 beta 1, which are highly expressed on osteoblasts and are essential for many fundamental functions in bone tissue development. The successful grafting of the bioactive molecules on titanium is proven by contact angle measurements, X-ray photoelectron spectroscopy and fluorescent labeling. Early attachment and spreading of cells are statistically enhanced by both peptidomimetics compared to unmodified titanium, reaching values of cell adhesion comparable to those obtained with full-length extracellular matrix proteins. Moreover, an increase in alkaline phosphatase activity, and statistically higher cell proliferation and mineralization are observed on surfaces coated with the peptidomimetics. This study shows an unprecedented biological activity for low-molecular-weight ligands on titanium, and gives striking evidence of the potential of these molecules to foster bone regeneration on implant materials. (c) 2015 Elsevier B.V. All rights reserved., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modification of titanium surfaces by adding antibiotic-loaded PHB spheres and PEG for biomedical applications

  • Rodriguez Contreras, Alejandra
  • Marqués Calvo, M. Soledad
  • Gil Mur, Francisco Javier
  • Manero Planella, José María
Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial properties. Therefore, the aim of this work is to develop a method of combining the antibacterial properties of antibiotic-loaded poly(3-hydroxybutyrate) (PHB) nano-and micro-spheres and poly(ethylene glycol) (PEG) as an antifouling agent, with titanium (Ti), as the base material for implants, in order to obtain surfaces with antibacterial activity. The Ti surfaces were linked to both PHB particles and PEG by a covalent bond. This attachment was carried out by firstly activating the surfaces with either Oxygen plasma or Sodium hydroxide. Further functionalization of the activated surfaces with different alkoxysilanes allows the reaction with PHB particles and PEG. The study confirms that the Ti surfaces achieved the antibacterial properties by combining the antibiotic-loaded PHB spheres, and PEG as an antifouling agent., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

NiTi superelastic orthodontic archwires with polyamide coating

  • BRAVO-GONZÁLEZ, LUIS-ALBERTO
  • González de Cabañes, A.
  • Manero, José María
  • Rupérez de Gracia, Elisa
  • Gil, FJ
Twenty orthodontic archwires with 55.2 % Ni and 44.8 % Ti (% weight) were subjected to a dipping treatment to coat the NiTi surface by a polyamide polymer. It has been selected a Polyamide 11 due to its remarkable long lasting performance. The transformation temperatures as well as the transformation stresses of the NiTi alloy were determined in order to know whether the coating process can alter its properties. The adhesive wear tests have been demonstrated that the wear rates as well as the dynamic friction coefficients μ of polymer coated wires are much lower than metallic wires. The corrosion studies have shown that the use of this polymer, as coating, seals the NiTi surface to prevent corrosion and the release of nickel ions. The average decrease of Ni ions release due to this coating is around 85 %., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of bone loss in antibacterial coated dental implants: an experimental study in dogs

  • Godoy-Gallardo, Maria
  • Manzanares Céspedes, Maria Cristina
  • Sevilla Sánchez, Pablo
  • Nart, Jose
  • Manzanares, Norberto
  • Manero, José María
  • Gil, FJ
  • Boyd, Steven
  • Rodríguez Rius, Daniel
This work was supported by Research Grants MAT2009-12547 and MAT2012-30706 (MINECO/FEDER, UE), by Fundación Ramon Areces (XVI Concurso Nacional de Ayudas a la Investigación) and Generalitat of Catalonia (BE-DGR-2012)., The aim of this study was to evaluate the in vivo effect of antibacterial modified dental implants in the first stages of peri-implantitis. Thirty dental implants were inserted in the mandibular premolar sites of 5 beagle dogs. Sites were randomly assigned to Ti (untreated implants, 10 units), Ti_Ag (silver electrodeposition treatment, 10 units), and Ti_TSP (silanization treatment, 10 units). Coated implants were characterized by scanning electron microscopy, interferometry and X-ray photoelectron spectroscopy. Two months after implant insertion, experimental peri-implantitis was initiated by ligature placement. Ligatures were removed 2 months later, and plaque formation was allowed for 2 additional months. Clinical and radiographic analyses were performed during the study. Implant-tissue samples were prepared for micro computed tomography, backscattered scanning electron microscopy, histomorphometric and histological analyses and ion release measurements. X-ray, SEM and histology images showed that vertical bone resorption in treated implants was lower than in the control group (P < 0.05). This effect is likely due to the capacity of the treatments to reduce bacteria colonization on the implant surface. Histological analysis suggested an increase of peri-implant bone formation on silanized implants. However, the short post-ligature period was not enough to detect differences in clinical parameters among implant groups. Within the limits of this study, antibacterial surface treatments have a positive effect against bone resorption induced by peri-mplantitis., info:eu-repo/semantics/acceptedVersion