Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • Hoyos-Nogués, Mireia
  • Brosel-Oliu, Sergi
  • Abramova, Natalia
  • Muñoz Pascual, Francisco Javier
  • Bratov, Andrey
  • Mas-Moruno, Carlos
  • Gil, Francesc-Xavier
Peri-implantitis, an inflammation caused by biofilm formation, constitutes a major cause of implant failure in dentistry. Thus, the detection of bacteria at the early steps of biofilm growth represents a powerful strategy to prevent implant-related infections. In this regard, antimicrobial peptides (AMPs) can be used as effective biological recognition elements to selectively detect the presence of bacteria. Thus, the aim of the present study was to combine the use of miniaturized and integrated impedimetric transducers and AMPs to obtain biosensors with high sensitivity to monitor bacterial colonization. Streptococcus sanguinis, which is one of the most prevalent strains in the onset of periodontal diseases, was used as a model of oral bacteria. To this end, a potent AMP derived from human lactoferrin was synthesized and covalently immobilized on interdigitated electrode arrays (IDEA). X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) were employed to optimize and characterize the method of immobilization. Noteworthy, the interaction of Streptococcus sanguinis with AMP-coated sensors provoked significant changes in the impedance spectra, which were univocally associated with the presence of bacteria, proving the feasibility of our method. In this regard, the developed biosensor permits to detect the presence of bacteria at concentrations starting from 101 colony forming units (CFU) mL−1 in KCl and from 102 CFU mL−1 in artificial saliva. Moreover, the system was devoid of cytotoxicity for human fibroblasts. These results indicate that the proposed approach can be effective in the detection of initial stages of biofilm formation, and may be useful in the early prevention and treatment of peri-implantitis., The authors acknowledge financial support from the Spanish Government through projects CTQ2014-54553-C3-1-R and MAT2015-67183-R, cofunded by the European Union through European Regional Development Funds, the Government of Catalonia (SGR2014 01333), the Technical University of Catalonia (fellowship of M.H.) and the European Union (Project ENIAC-ED-52v161210, and FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985). This work was partially supported by Government of Russian Federation, Grant 074-U01., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Biofunctionalization strategies on tantalum-based materials for osseointegrative applications

  • Mas Moruno, Carlos|||0000-0001-8337-0872
  • Garrido, Beatriz
  • Rodríguez Rius, Daniel|||0000-0001-6286-5200
  • Rupérez de Gracia, Elisa|||0000-0001-8845-512X
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
The use of tantalum as biomaterial for orthopedic applications is gaining considerable attention in the clinical practice because it presents an excellent chemical stability, body fluid resistance, biocompatibility, and it is more osteoconductive than titanium or cobalt-chromium alloys. Nonetheless, metallic biomaterials are commonly bioinert and may not provide fast and long-lasting interactions with surrounding tissues. The use of short cell adhesive peptides derived from the extracellular matrix has shown to improve cell adhesion and accelerate the implant’s biointegration in vivo. However, this strategy has been rarely applied to tantalum materials. In this work, we have studied two immobilization strategies (physical adsorption and covalent binding via silanization) to functionalize tantalum surfaces with a cell adhesive RGD peptide. Surfaces were used untreated or activated with either HNO3 or UV/ozone treatments. The process of biofunctionalization was characterized by means of physicochemical and biological methods. Physisorption of the RGD peptide on control and HNO3-treated tantalum surfaces significantly enhanced the attachment and spreading of osteoblast-like cells; however, no effect on cell adhesion was observed in ozone-treated samples. This effect was attributed to the inefficient binding of the peptide on these highly hydrophilic surfaces, as evidenced by contact angle measurements and X-ray photoelectron spectroscopy. In contrast, activation of tantalum with UV/ozone proved to be the most efficient method to support silanization and subsequent peptide attachment, displaying the highest values of cell adhesion. This study demonstrates that both physical adsorption and silanization are feasible methods to immobilize peptides onto tantalum-based materials, providing them with superior bioactivity., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards the cell-instructive bactericidal substrate: exploring the combination of nanotopographical features and integrin selective synthetic ligands

  • Fraioli, Roberta
  • Tsimbouri, Penelope M.
  • Fisher, Leanne E.
  • Nobbs, Angela H.
  • Su, Bo
  • Neubauer, Stefanie
  • Rechenmacher, Florian
  • Kessler, Horst
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Dalby, Matthew J.
  • Manero Planella, José María|||0000-0002-1673-4389
  • Mas Moruno, Carlos|||0000-0001-8337-0872
Engineering the interface between biomaterials and tissues is important to increase implant lifetime and avoid failures and revision surgeries. Permanent devices should enhance attachment and differentiation of stem cells, responsible for injured tissue repair, and simultaneously discourage bacterial colonization; this represents a major challenge. To take first steps towards such a multifunctional surface we propose merging topographical and biochemical cues on the surface of a clinically relevant material such as titanium. In detail, our strategy combines antibacterial nanotopographical features with integrin selective synthetic ligands that can rescue the adhesive capacity of the surfaces and instruct mesenchymal stem cell (MSC) response. To this end, a smooth substrate and two different high aspect ratio topographies have been produced and coated either with an avß3-selective peptidomimetic, an a5ß1-selective peptidomimetic, or an RGD/PHSRN peptidic molecule. Results showed that antibacterial effects of the substrates could be maintained when tested on pathogenic Pseudomonas aeruginosa. Further, functionalization increased MSC adhesion to the surfaces and the avß3-selective peptidomimetic-coated nanotopographies promoted osteogenesis. Such a dual physicochemical approach to achieve multifunctional surfaces represents a first step in the design of novel cell-instructive biomaterial surfaces., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • Hoyos Nogués, Mireia|||0000-0003-4221-5643
  • Brosel, Sergi
  • Abramova, Natalia
  • Muñoz, FJ
  • Andrey, Bratov
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Mas Moruno, Carlos|||0000-0001-8337-0872
Peri-implantitis, an inflammation caused by biofilm formation, constitutes a major cause of implant failure in dentistry. Thus, the detection of bacteria at the early steps of biofilm growth represents a powerful strategy to prevent implant-related infections. In this regard, antimicrobial peptides (AMPs) can be used as effective biological recognition elements to selectively detect the presence of bacteria. Thus, the aim of the present study was to combine the use of miniaturized and integrated impedimetric transducers and AMPs to obtain biosensors with high sensitivity to monitor bacterial colonization. Streptococcus sanguinis, which is one of the most prevalent strains in the onset of periodontal diseases, was used as a model of oral bacteria. To this end, a potent AMP derived from human lactoferrin was synthesized and covalently immobilized on interdigitated electrode arrays (IDEA). X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) were employed to optimize and characterize the method of immobilization. Noteworthy, the interaction of Streptococcus sanguinis with AMP-coated sensors provoked significant changes in the impedance spectra, which were univocally associated with the presence of bacteria, proving the feasibility of our method. In this regard, the developed biosensor permits to detect the presence of bacteria at concentrations starting from 101 colony forming units (CFU) mL-1 in KCl and from 102 CFU mL-1 in artificial saliva. Moreover, the system was devoid of cytotoxicity for human fibroblasts. These results indicate that the proposed approach can be effective in the detection of initial stages of biofilm formation, and may be useful in the early prevention and treatment of peri-implantitis, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Installing multifunctionality on titanium with RGD-decorated polyurethane-polyurea roxithromycin loaded nanoparticles: toward new osseointegrative therapies

  • Rocas, Pau
  • Hoyos Nogués, Mireia
  • Rocas, Josep
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Albericio Palomera, Fernando
  • Mas Moruno, Carlos
The authors thank the Spanish Government for financial support through Project No. MAT2012–30706, cofunded by the European Union through European Regional Development Funds, and the Government of Catalonia (SGR2009 1039). C.M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985). P.R., J.R., and F.A. thank the Spanish Government (MICINN) for fi nancial support into the INNPACTO Project No. IPT-090000–2010–1 (Polysfera)., A novel class of polyurethane-polyurea nanoparticles (PUUa NPs) to install multifunctionality on biomaterials is presented. Biofunctionalization of titanium with roxithromycin loaded RGD-decorated PUUa NPs results in an outstanding improvement of osteoblast adhesion and strong suppression of bacterial attachment. This strategy represents a powerful approach to enhance the osseointegration of implant materials., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biofunctionalization strategies on tantalum-based materials for osseointegrative applications

  • Mas Moruno, Carlos
  • Garrido, Beatriz
  • Rodríguez Rius, Daniel
  • Rupérez de Gracia, Elisa
  • Gil Mur, Francisco Javier
The use of tantalum as biomaterial for orthopedic applications is gaining considerable attention in the clinical practice because it presents an excellent chemical stability, body fluid resistance, biocompatibility, and it is more osteoconductive than titanium or cobalt-chromium alloys. Nonetheless, metallic biomaterials are commonly bioinert and may not provide fast and long-lasting interactions with surrounding tissues. The use of short cell adhesive peptides derived from the extracellular matrix has shown to improve cell adhesion and accelerate the implant’s biointegration in vivo. However, this strategy has been rarely applied to tantalum materials. In this work, we have studied two immobilization strategies (physical adsorption and covalent binding via silanization) to functionalize tantalum surfaces with a cell adhesive RGD peptide. Surfaces were used untreated or activated with either HNO3 or UV/ozone treatments. The process of biofunctionalization was characterized by means of physicochemical and biological methods. Physisorption of the RGD peptide on control and HNO3-treated tantalum surfaces significantly enhanced the attachment and spreading of osteoblast-like cells; however, no effect on cell adhesion was observed in ozone-treated samples. This effect was attributed to the inefficient binding of the peptide on these highly hydrophilic surfaces, as evidenced by contact angle measurements and X-ray photoelectron spectroscopy. In contrast, activation of tantalum with UV/ozone proved to be the most efficient method to support silanization and subsequent peptide attachment, displaying the highest values of cell adhesion. This study demonstrates that both physical adsorption and silanization are feasible methods to immobilize peptides onto tantalum-based materials, providing them with superior bioactivity., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Functionalization of CoCr surfaces with cell adhesive peptides to promote HUVECs adhesion and proliferation

  • Castellanos, Maria Isabel
  • Mas-Moruno, Carlos
  • Grau, Anna
  • Serra-Picamal, Xavier
  • Trepat, Xavier
  • Albericio Palomera, Fernando
  • Joner, Michael
  • Gil, FJ
  • Ginebra, Maria-Pau
  • Manero, José María
  • PEGUEROLES, MARTA
Authors acknowledge the Spanish Government for financial support through project MAT2015-67183-R (MINECO/FEDER, UE) and the Agency for Administration of University and Research Grants of the Government of Catalonia [2014 SGR 1333]. M.I.C. would like to thank the Generalitat de Catalunya for funding through a FI Scholarship. C. Mas-Moruno thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia [2011-BP-B-00042] and, Biomimetic surface modification with peptides that have specific cell-binding moieties is a promising approach to improve endothelialization of metal-based stents. In this study, we functionalized CoCr surfaces with RGDS, REDV, YIGSR peptides and their combinations to promote endothelial cells (ECs) adhesion and proliferation. An extensive characterization of the functionalized surfaces was performed by XPS analysis, surface charge and quartz crystal microbalance with dissipation monitoring (QCM-D), which demonstrated the successful immobilization of the peptides to the surface. Cell studies demonstrated that the covalent functionalization of CoCr surfaces with an equimolar combination of RGDS and YIGSR represents the most powerful strategy to enhance the early stages of ECs adhesion and proliferation, indicating a positive synergistic effect between the two peptide motifs. Although these peptide sequences slightly increased smooth muscle cells (SMCs) adhesion, these values were ten times lower than those observed for ECs. The combination of RGDS with the REDV sequence did not show synergistic effects in promoting the adhesion or proliferation of ECs. The strategy presented in this study holds great potential to overcome clinical limitations of current metal stents by enhancing their capacity to support surface endothelialization., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • RODRIGUEZ-CONTRERAS, ALEJANDRA
  • Marqués-Calvo, María Soledad
  • Gil, FJ
  • Manero, José María
  • Hoyos-Nogués, Mireia
  • BROSEL, SERGI
  • Abramova, Natalia
  • Muñoz, Francesc-Xavier
  • Bratov, Andrey
  • Mas-Moruno, Carlos
The authors acknowledge financial support from the Spanish Government through projects CTQ2014-54553-C3-1-R and MAT2012–30706, cofunded by the European Union through European Regional Development Funds, the Government of Catalonia (SGR2009 1039), the Technical University of Catalonia (fellowship of M.H.) and the European Union (Project ENIAC-ED-52v161210, and FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985). This work was partially supported by Government of Russian Federation, Grant 074-U01., Novel researches are focused on the prevention and management of post-operative infections. To avoid this common complication of implant surgery, it is preferable to use new biomaterials with antibacterial properties. Therefore, the aim of this work is to develop a method of combining the antibacterial properties of antibiotic-loaded poly(3-hydroxybutyrate) (PHB) nano- and micro-spheres and poly(ethylene glycol) (PEG) as an antifouling agent, with titanium (Ti), as the base material for implants, in order to obtain surfaces with antibacterial activity. The Ti surfaces were linked to both PHB particles and PEG by a covalent bond. This attachment was carried out by firstly activating the surfaces with either Oxygen plasma or Sodium hydroxide. Further functionalization of the activated surfaces with different alkoxysilanes allows the reaction with PHB particles and PEG. The study confirms that the Ti surfaces achieved the antibacterial properties by combining the antibiotic-loaded PHB spheres, and PEG as an antifouling agent., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Antibacterial properties of hLf1-11 peptide onto titanium surfaces: a comparison study between silanization and surface initiated polymerization

  • Godoy-Gallardo, Maria
  • Mas-Moruno, Carlos
  • Yu, Kai
  • Manero, José María
  • Gil, FJ
  • Kizhakkedathu, Jayachandran
  • Rodríguez Rius, Daniel
This study was supported by the Ministry of Science and Innovation (MICINN) and the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government (Projects: MAT2009-12547, MAT2012-30706 co-funded by the European Union through European Regional Development Funds). C.M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA grant agreement n° 321985)., Dental implant failure can be associated with infections that develop into peri-implantitis. In order to reduce biofilm formation, several strategies focusing on the use of antimicrobial peptides (AMPs) have been studied. To covalently immobilize these molecules onto metallic substrates, several techniques have been developed, including silanization and polymer brush prepared by surface-initiated atom transfer radical polymerization (ATRP), with varied peptide binding yield and antibacterial performance. The aim of the present study was to compare the efficiency of these methods to immobilize the lactoferrin-derived hLf1–11 antibacterial peptide onto titanium, and evaluate their antibacterial activity in vitro. Smooth titanium samples were coated with hLf1–11 peptide under three different conditions: silanization with 3-aminopropyltriethoxysilane (APTES), and polymer brush based coatings with two different silanes. Peptide presence was determined by X-ray photoelectron spectroscopy, and the mechanical stability of the coatings was studied under ultrasonication. The LDH assays confirmed that HFFs viability and proliferation were no affected by the treatments. The in vitro antibacterial properties of the modified surfaces were tested with two oral strains (Streptococcus sanguinis and Lactobacillus salivarius) showing an outstanding reduction. A higher decrease in bacterial attachment was noticed when samples were modified by ATRP methods compared to silanization. This effect is likely due to the capacity to immobilize more peptide on the surfaces using polymer brushes and the nonfouling nature of polymer PDMA segment., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • Hoyos Nogués, Mireia
  • Brosel, Sergi
  • Abramova, Natalia
  • Muñoz, FJ
  • Andrey, Bratov
  • Gil Mur, Francisco Javier
  • Mas Moruno, Carlos
Peri-implantitis, an inflammation caused by biofilm formation, constitutes a major cause of implant failure in dentistry. Thus, the detection of bacteria at the early steps of biofilm growth represents a powerful strategy to prevent implant-related infections. In this regard, antimicrobial peptides (AMPs) can be used as effective biological recognition elements to selectively detect the presence of bacteria. Thus, the aim of the present study was to combine the use of miniaturized and integrated impedimetric transducers and AMPs to obtain biosensors with high sensitivity to monitor bacterial colonization. Streptococcus sanguinis, which is one of the most prevalent strains in the onset of periodontal diseases, was used as a model of oral bacteria. To this end, a potent AMP derived from human lactoferrin was synthesized and covalently immobilized on interdigitated electrode arrays (IDEA). X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) were employed to optimize and characterize the method of immobilization. Noteworthy, the interaction of Streptococcus sanguinis with AMP-coated sensors provoked significant changes in the impedance spectra, which were univocally associated with the presence of bacteria, proving the feasibility of our method. In this regard, the developed biosensor permits to detect the presence of bacteria at concentrations starting from 101 colony forming units (CFU) mL-1 in KCl and from 102 CFU mL-1 in artificial saliva. Moreover, the system was devoid of cytotoxicity for human fibroblasts. These results indicate that the proposed approach can be effective in the detection of initial stages of biofilm formation, and may be useful in the early prevention and treatment of peri-implantitis, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards the cell-instructive bactericidal substrate: exploring the combination of nanotopographical features and integrin selective synthetic ligands

  • Fraioli, Roberta
  • Tsimbouri, Penelope M.
  • Fisher, Leanne E.
  • Nobbs, Angela H.
  • Su, Bo
  • Neubauer, Stefanie
  • Rechenmacher, Florian
  • Kessler, Horst
  • Ginebra Molins, Maria Pau
  • Dalby, Matthew J.
  • Manero Planella, José María
  • Mas Moruno, Carlos
Engineering the interface between biomaterials and tissues is important to increase implant lifetime and avoid failures and revision surgeries. Permanent devices should enhance attachment and differentiation of stem cells, responsible for injured tissue repair, and simultaneously discourage bacterial colonization; this represents a major challenge. To take first steps towards such a multifunctional surface we propose merging topographical and biochemical cues on the surface of a clinically relevant material such as titanium. In detail, our strategy combines antibacterial nanotopographical features with integrin selective synthetic ligands that can rescue the adhesive capacity of the surfaces and instruct mesenchymal stem cell (MSC) response. To this end, a smooth substrate and two different high aspect ratio topographies have been produced and coated either with an avß3-selective peptidomimetic, an a5ß1-selective peptidomimetic, or an RGD/PHSRN peptidic molecule. Results showed that antibacterial effects of the substrates could be maintained when tested on pathogenic Pseudomonas aeruginosa. Further, functionalization increased MSC adhesion to the surfaces and the avß3-selective peptidomimetic-coated nanotopographies promoted osteogenesis. Such a dual physicochemical approach to achieve multifunctional surfaces represents a first step in the design of novel cell-instructive biomaterial surfaces., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mimicking bone extracellular matrix: integrin-binding peptidomimetics enhance osteoblast-like cells adhesion, proliferation, and differentiation on titanium

  • Fraioli, Roberta
  • Rechenmacher, Florian
  • Neubauer, Stefanie
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Kessler, Horst
  • Mas Moruno, Carlos
The authors acknowledge the Spanish Government for financial support (Project: MAT2012-30706), co-funded by the European Union through European Regional Development Funds, and the Government of Catalonia (SGR2009 1039). R.F. thanks the Government of Catalonia for financial support through a predoctoral fellowship. C.M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Program (Marie Curie Actions) of the European Union’s Seventh Framework Program (FP7-PEOPLE-2012-CIG, REA grant agreement 321985). The invaluable assistance of Mrs. Montse Dominguez with the XPS measurements and analysis is greatly appreciated. F.R. thanks IGSSE (International Graduate School of Science and Engineering) and Bund der Freunde der TU Munchen ¨e.V. for funding. S.N.thanks CompInt(Materials Science of Complex Interfaces) of the Elite Network of Bavaria and Max Planck Society for financial support. H.K.thanks IAS (Institute for Advanced Study) of Technische Universitat¨ Munchen, ¨ CIPSM (Center for Integrated Protein Science Munich) and King Abdulaziz University (KAU) for technical and financial support (Grant HiCi/25-3-1432)., Interaction between the surface of implants and biological tissues is a key aspect of biomaterials research. Apart from fulfilling the non-toxicity and structural requirements, synthetic materials are asked to direct cell response, offering engineered cues that provide specific instructions to cells. This work explores the functionalization of titanium with integrin-binding peptidomimetics as a novel and powerful strategy to improve the adhesion, proliferation and differentiation of osteoblast-like cells to implant materials. Such biomimetic strategy aims at targeting integrins αvβ3 and α5β1, which are highly expressed on osteoblasts and are essential for many fundamental functions in bone tissue development. The successful grafting of the bioactive molecules on titanium is proven by contact angle measurements, X-ray photoelectron spectroscopy and fluorescent labeling. Early attachment and spreading of cells are statistically enhanced by both peptidomimetics compared to unmodified titanium, reaching values of cell adhesion comparable to those obtained with full-length extracellular matrix proteins. Moreover, an increase in alkaline phosphatase activity, and statistically higher cell proliferation and mineralization are observed on surfaces coated with the peptidomimetics. This study shows an unprecedented biological activity for low-molecular-weight ligands on titanium, and gives striking evidence of the potential of these molecules to foster bone regeneration on implant materials., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface guidance of stem cell behavior: chemically tailored co-presentation of integrin-binding peptides stimulates osteogenic differentiation in vitro and bone formation in vivo

  • Fraioli, Roberta
  • Dashnyam, Khandmaa
  • Kim, Joong-Hyun
  • Pérez Antoñanzas, Roman
  • Kim, Hae-Won
  • Gil Mur, Francisco Javier
  • Ginebra Molins, Maria Pau
  • Manero Planella, José María
  • Mas Moruno, Carlos
The authors thank the Spanish Government for financial support through Project No. MAT2015-67183-R (MINECO-FEDER), co-funded by the European Union through European Regional Development Funds. R.F. and C.M.-M thank the Government of Catalonia for financial support through a pre-doctoral and post-doctoral fellowship, respectively. C.M.-M also thanks the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985) for funding this project. Partial financial supports from Korea government are also acknowledged (grant no. 2009-0093829 & 2015032163). Dr. M. Dominguez (CRNE, UPC) is acknowledged for conducting XPS measurements and Mrs. C. Lorrain for technical support with the mineralization studies., Surface modification stands out as a versatile technique to create instructive biomaterials that are able to actively direct stem cell fate. Chemical functionalization of titanium has been used in this work to stimulate the differentiation of human mesenchymal stem cells (hMSCs) into the osteoblastic lineage, by covalently anchoring a synthetic double-branched molecule (PTF) to the metal that allows a finely controlled presentation of peptidic motifs. In detail, the effect of the RGD adhesive peptide and its synergy motif PHSRN is studied, comparing a random distribution of the two peptides with the chemically-tailored disposition within the custom made synthetic platform, which mimics the interspacing between the motifs observed in fibronectin. Contact angle measurement and XPS analysis are used to prove the efficiency of functionalization. We demonstrate that, by rationally designing ligands, stem cell response can be efficiently guided towards the osteogenic phenotype: In vitro, PTF-functionalized surfaces support hMSCs adhesion, with higher cell area and formation of focal contacts, expression of the integrin receptor α5β1 and the osteogenic marker Runx2, and deposition a highly mineralized matrix, reaching values of mineralization comparable to fibronectin. Our strategy is also demonstrated to be efficient in promoting new bone growth in vivo in a rat calvarial defect. These results highlight the efficacy of chemical control over the presentation of bioactive peptides; such systems may be used to engineer bioactive surfaces with improved osseointegrative properties, or can be easily tuned to generate multi-functional coatings requiring a tailored disposition of the peptidic motifs., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biofunctionalization strategies on tantalum-based materials for osseointegrative applications

  • Mas Moruno, Carlos
  • Garrido, Beatriz
  • Rodriguez, Daniel
  • Rupérez de Gracia, Elisa
  • Gil Mur, Francisco Javier
The authors acknowledge the Spanish Government for financial support through Project MAT2012-30706, cofunded by the European Union through European Regional Development Funds, and the Government of Catalonia (SGR2009 1039). Carlos Mas-Moruno thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B-00042) and the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA Grant Agreement 321985). The authors thank Mrs. Montse Dominguez and Mr. Trifon Trifonov (CRNE) for their excellent technical support with the XPS and SEM measurements, respectively., The use of tantalum as biomaterial for orthopedic applications is gaining considerable attention in the clinical practice because it presents an excellent chemical stability, body fluid resistance, biocompatibility, and it is more osteoconductive than titanium or cobalt-chromium alloys. Nonetheless, metallic biomaterials are commonly bioinert and may not provide fast and long-lasting interactions with surrounding tissues. The use of short cell adhesive peptides derived from the extracellular matrix has shown to improve cell adhesion and accelerate the implant’s biointegration in vivo. However, this strategy has been rarely applied to tantalum materials. In this work, we have studied two immobilization strategies (physical adsorption and covalent binding via silanization) to functionalize tantalum surfaces with a cell adhesive RGD peptide. Surfaces were used untreated or activated with either HNO3 or UV/ozone treatments. The process of biofunctionalization was characterized by means of physicochemical and biological methods. Physisorption of the RGD peptide on control and HNO3-treated tantalum surfaces significantly enhanced the attachment and spreading of osteoblast-like cells; however, no effect on cell adhesion was observed in ozone-treated samples. This effect was attributed to the inefficient binding of the peptide on these highly hydrophilic surfaces, as evidenced by contact angle measurements and X-ray photoelectron spectroscopy. In contrast, activation of tantalum with UV/ozone proved to be the most efficient method to support silanization and subsequent peptide attachment, displaying the highest values of cell adhesion. This study demonstrates that both physical adsorption and silanization are feasible methods to immobilize peptides onto tantalum-based materials, providing them with superior bioactivity., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tuning mesenchymal stem cell response onto titanium-niobium-hafnium alloy by recombinant fibronectin fragments

  • Herranz Díez, Carolina
  • Mas-Moruno, Carlos
  • Neubauer, Stefanie
  • Kessler, Horst
  • Gil, FJ
  • PEGUEROLES, MARTA
  • Manero, José María
  • Guillem-Marti, Jordi
The authors would like to thank the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government for financial support through MAT2012-30706 project co-funded by the EU through European Regional Development Funds and the FI fellowship of the AGAUR Agency. C. M.-M. thanks the support of the Secretary for Universities and Research of the Ministry of Economy and Knowledge of the Government of Catalonia (2011-BP-B00042) and the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA Grant Agreement 321985). Technical assistance of Mrs. Montse Dominguez with XPS measurements is greatly appreciated., Since metallic biomaterials used for bone replacement possess low bioactivity, the use of cell adhesive moieties is a common strategy to improve cellular response onto these surfaces. In recent years, the use of recombinant proteins has emerged as an alternative to native proteins and short peptides owing to the fact that they retain the biological potency of native proteins, while improving their stability. In the present study, we investigated the biological effect of two different recombinant fragments of fibronectin, spanning the 8–10th and 12–14th type III repeats, covalently attached to a new TiNbHf alloy using APTES silanization. The fragments were studied separately and mixed at different concentrations and compared to a linear RGD, a cyclic RGD and the full-length fibronectin protein. Cell culture studies using rat mesenchymal stem cells demonstrated that low to medium concentrations (30% and 50%) of type III 8–10th fragment mixed with type III 12–14th fragment stimulated cell spreading and proliferation compared to RGD peptides and the fragments separately. On the other hand, type III 12–14th fragment alone or mixed at low volume percentages ≤50% with type III 8–10th fragment increased alkaline phosphatase levels compared to the other molecules. These results are significant for the understanding of the role of fibronectin recombinant fragments in cell responses and thus to design bioactive coatings for biomedical applications., info:eu-repo/semantics/acceptedVersion