Pasar al contenido principal

RECUBRIMIENTOS OSTEOINDUCTIVOS Y ANTIMICROBIANOS AVANZADOS PARA MEJORAR LA OSTEOINTEGRACION DE BIOMATERIALES EN PATOLOGIAS OSTEOPOROTICAS Y DIABETICAS

MAT2015-67183-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impedimetric antimicrobial peptide-based sensor for the early detection of periodontopathogenic bacteria

  • Hoyos-Nogués, Mireia
  • Brosel-Oliu, Sergi
  • Abramova, Natalia
  • Muñoz Pascual, Francisco Javier
  • Bratov, Andrey
  • Mas-Moruno, Carlos
  • Gil, Francesc-Xavier
Peri-implantitis, an inflammation caused by biofilm formation, constitutes a major cause of implant failure in dentistry. Thus, the detection of bacteria at the early steps of biofilm growth represents a powerful strategy to prevent implant-related infections. In this regard, antimicrobial peptides (AMPs) can be used as effective biological recognition elements to selectively detect the presence of bacteria. Thus, the aim of the present study was to combine the use of miniaturized and integrated impedimetric transducers and AMPs to obtain biosensors with high sensitivity to monitor bacterial colonization. Streptococcus sanguinis, which is one of the most prevalent strains in the onset of periodontal diseases, was used as a model of oral bacteria. To this end, a potent AMP derived from human lactoferrin was synthesized and covalently immobilized on interdigitated electrode arrays (IDEA). X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) were employed to optimize and characterize the method of immobilization. Noteworthy, the interaction of Streptococcus sanguinis with AMP-coated sensors provoked significant changes in the impedance spectra, which were univocally associated with the presence of bacteria, proving the feasibility of our method. In this regard, the developed biosensor permits to detect the presence of bacteria at concentrations starting from 101 colony forming units (CFU) mL−1 in KCl and from 102 CFU mL−1 in artificial saliva. Moreover, the system was devoid of cytotoxicity for human fibroblasts. These results indicate that the proposed approach can be effective in the detection of initial stages of biofilm formation, and may be useful in the early prevention and treatment of peri-implantitis., The authors acknowledge financial support from the Spanish Government through projects CTQ2014-54553-C3-1-R and MAT2015-67183-R, cofunded by the European Union through European Regional Development Funds, the Government of Catalonia (SGR2014 01333), the Technical University of Catalonia (fellowship of M.H.) and the European Union (Project ENIAC-ED-52v161210, and FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985). This work was partially supported by Government of Russian Federation, Grant 074-U01., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Importance of the roughness and residual stresses of dental implants on fatigue and osseointegration behavior. In vivo study in rabbits

  • Velasco Ortega, E
  • Monsalve Guil, L
  • Jimenez Guerra, A
  • Ortiz Garcia, Ivan
  • Moreno Muñoz, Jesus
  • Nuñez Marquez, Enrique
  • Pegueroles Neyra, Marta|||0000-0002-7895-8337
  • Pérez Antoñanzas, Román
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
This study focuses on the fatigue behavior and bone-implant attachment for the more usual surfaces of the different CP-titanium dental implants. The implants studied were: as-received (CTR), acid etching (AE), spark-anodization (SA), and with a grit-blasted surface (GB). Residual stresses were determined by means of X-ray diffraction. The fatigue tests were carried out at 37°C on 160 dental implants, and the stress-failure (S-N) curve was determined. The fatigue tests showed that the grit-blasting process improved fatigue life. This is a consequence of the layer of compressive residual stresses that the treatment generates in titanium surfaces. Further, our aim was to assess and compare the short- and midterm bone regenerative potential and mechanical retention of the implants in bone of New Zealand rabbits. The mechanical retention after 4 and 10 weeks of implantation was evaluated with histometric and pull-out tests, respectively, as a measure of the osseointegration of the implants. The results demonstrated that the GB treatment produced microrough that accelerated bone tissue regeneration and increased mechanical retention in the bone bed at short periods of implantation in comparison with all other implants tested. The GB surface produced an improvement in mechanical long-time behavior and improved bone growth. These types of treated implants can have great potential in clinical applications, as evidenced by the outcomes of the current study.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A dual molecular biointerface combining RGD and KRSR sequences improves osteoblastic functions by synergizing integrin and cell-membrane proteoglycan binding

  • Hoyos Nogués, Mireia|||0000-0003-4221-5643
  • Falgueras Batlle, Elena
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Manero Planella, José María|||0000-0002-1673-4389
  • Gil Mur, Francisco Javier|||0000-0002-6824-1412
  • Mas Moruno, Carlos|||0000-0001-8337-0872
Synergizing integrin and cell-membrane heparan sulfate proteoglycan signaling on biomaterials through peptidic sequences is known to have beneficial effects in the attachment and behavior of osteoblasts; however, controlling the exact amount and ratio of peptides tethered on a surface is challenging. Here, we present a dual molecular-based biointerface combining integrin (RGD) and heparin (KRSR)-binding peptides in a chemically controlled fashion. To this end, a tailor-made synthetic platform (PLATF) was designed and synthesized by solid-phase methodologies. The PLATF and the control linear peptides (RGD or KRSR) were covalently bound to titanium via silanization. Physicochemical characterization by means of contact angle, Raman spectroscopy and XPS proved the successful and stable grafting of the molecules. The biological potential of the biointerfaces was measured with osteoblastic (Saos-2) cells both at short and long incubation periods. Biomolecule grafting (either the PLATF, RGD or KRSR) statistically improved (p < 0.05) cell attachment, spreading, proliferation and mineralization, compared to control titanium. Moreover, the molecular PLATF biointerface synergistically enhanced mineralization (p < 0.05) of Saos-2 cells compared to RGD or KRSR alone. These results indicate that dual-function coatings may serve to improve the bioactivity of medical implants by mimicking synergistic receptor binding.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Single-step pulsed electrodeposition of calcium phosphate coatings on titanium for drug delivery

  • Vidal Girona, Elia|||0000-0002-0134-7722
  • Buxadera Palomero, Judit|||0000-0003-0897-2093
  • Pierre, Camille
  • Manero Planella, José María|||0000-0002-1673-4389
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Cazalbou, Sophie
  • Combes, Christele
  • Rupérez de Gracia, Elisa|||0000-0001-8845-512X
  • Rodríguez Rius, Daniel|||0000-0001-6286-5200
Metallic implants have some limitations related to bioactivity and bacteria colonization leading to infections. In this regard, calcium phosphate coatings can be used as carrier for drug delivery in order to improve the mentioned drawbacks. The present work proposes the introduction of an antibacterial agent in the course of a pulsed and reverse pulsed electrodeposition. Calcium phosphate coatings were prepared in 30¿min using different pulse waveforms (unipolar-bipolar), current densities (2–5¿mA/cm2) and temperatures (40–60¿°C). Mechanical stability of the as-coated surfaces was studied in order to select the optimal electrodeposition conditions. Subsequently, selected coatings were loaded with an antiseptic agent, chlorhexidine digluconate (CHX), via a single-step co-deposition procedure. CHX concentration added to the electrolyte was adjusted to 3¿mM based on the antibacterial efficacy of the loaded coatings evaluated in vitro with Staphylococcus aureus and Escherichia coli bacteria strains. Whereas the same chlorhexidine concentration was added to the electrolyte, results showed that the amount of CHX loaded was different for each condition while release kinetics was maintained. The results of this work demonstrate that a pulsed co-deposition strategy has great potential to modulate local delivery of antibacterial agents such as chlorhexidine digluconate, which may prevent early phase infections of metallic implants after insertion.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

All-in-one trifunctional strategy: a cell adhesive, bacteriostatic and bactericidal coating for titanium implants

  • Hoyos Nogués, Mireia
  • Buxadera-Palomero, Judit
  • Ginebra Molins, Maria Pau
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Mas Moruno, Carlos
The authors thank the Spanish Government for financial support through a Ramon y Cajal grant of C.M.-M. (RYC-2015-18566) and Projects No. MAT2015-67183-R and MAT2017-83905-R (MINECO/FEDER), cofunded by the European Union through European Regional Development Funds, the Fundación Hergar, the Government of Catalonia (2014SGR-1333 and ICREA academia fellowship of M.-P.G), the Technical University of Catalonia (fellowship of M.H.-N.) and the European Commission (Marie Curie Career Integration Grant of C.M.-M, REA Grant Agreement No. 321985). The authors wish to express their gratitude to Dr. M. Dominguez and Trifon Trifonov for technical assistance with XPS analysis and SEM/FIB measurements, respectively, Strategies to inhibit initial bacterial adhesion are extremely important to prevent infection on biomaterial surfaces. However, the simultaneous attraction of desired eukaryotic cells remains a challenge for successful biomaterial-host tissue integration. Here we describe a method for the development of a trifunctional coating that repels contaminating bacteria, kills those that adhere, and promotes osteoblast adhesion. To this end, titanium surfaces were functionalized by electrodeposition of an antifouling polyethylene glycol (PEG) layer and subsequent binding of a peptidic platform with cell-adhesive and bactericidal properties. The physicochemical characterization of the samples via SEM, contact angle, FTIR and XPS analysis verified the successful binding of the PEG layer and the biomolecules, without altering the morphology and topography of the samples. PEG coatings inhibited protein adsorption and osteoblast-like (SaOS-2) attachment; however, the presence of cell adhesive domains rescued osteoblast adhesion, yielding higher values of cell attachment and spreading compared to controls (p < 0.05). Finally, the antibacterial potential of the coating was measured by live/dead assays and SEM using S. sanguinis as a model of early colonizer in oral biofilms. The presence of PEG layers significantly reduced bacterial attachment on the surfaces (p < 0.05). This antibacterial potential was further increased by the bactericidal peptide, yielding values of bacterial adhesion below 0.2% (p < 0.05). The balance between the risk of infection and the optimal osteointegration of a biomaterial is often described as “the race for the surface”, in which contaminating bacteria and host tissue cells compete to colonize the implant. In the present work, we have developed a multifunctional coating for a titanium surface that promotes the attachment and spreading of osteoblasts, while very efficiently inhibits bacterial colonization, thus holding promise for application in bone replacing applications., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the elastic modulus on the osseointegration of dental implants

  • Brizuela Velasco, Aritza
  • Herrero-Climent, Mariano
  • Rios Carrasco, Elisa
  • Rios Santos, José Vicente
  • Pérez Antoñanzas, Roman
  • Manero, José María
  • Gil, FJ
This research was funded by the Spanish government for the Project MAT2015-67183-R (MINECO/FEDER, UE) and Klockner for machining the samples., The load transfer from metallic prosthesis to tissue plays an important role in the success of a designed device. From a mechanical behavior point of view, the load transfer will be favored when the elastic modulus between the metallic implant and the bone tissue are similar. Titanium and Ti-6Al-4V are the most commonly used metals and alloys in the field of dental implants, although they present high elastic moduli and hence trigger bone resorption. We propose the use of low-modulus -type titanium alloys that can improve the growth of new bone surrounding the implant. We designed dental implants with identical morphology and micro-roughness composed of: Ti-15Zr, Ti-19.1Nb-8.8Zr, Ti-41.2Nb-6.1Zr, and Ti-25Hf-25Ta. The commercially pure Ti cp and Ti-6Al-4V were used as control samples. The alloys were initially mechanically characterized with a tensile test using a universal testing machine. The results showed the lowest elastic modulus for the Ti-25Hf-25Ta alloy. We implanted a total of six implants in the mandible (3) and maxilla (3) for each titanium alloy in six minipigs and evaluated their bone index contact (i.e., the percentage of new bone in contact with the metal—BIC%) after 3 and 6 weeks of implantation. The results showed higher BIC% for the dental implants with lowest elastic modulus, showing the importance of decreasing the elastic modulus of alloys for the successful osseointegration of dental implants., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biofunctional polyethylene glycol coatings on titanium: an in vitro-based comparison of functionalization methods

  • Buxadera-Palomero, Judit
  • Calvo Muñoz, Cristina
  • Torrent Camarero, Sergi
  • Gil, FJ
  • Mas-Moruno, Carlos
  • Canal Barnils, Cristina
  • Rodríguez Rius, Daniel
The authors acknowledge financial support of Technical University of Catalonia and Fundación Ramón Areces through the fellowship of JB-P. Financial support for the project is acknowledged to Fundación Ramón Areces through project “Biosellado”, the Spanish Government through Ramon y Cajal fellowships of CC and CM-M, and project MAT2015-67183-R, co-funded by the EU through European Regional Development Funds, and the European Cooperation in Science and Technology, COST action MP1101. The authors also wish to express their gratitude to Montserrat Domínguez, for her useful comments and advice regarding the XPS analysis., Three methods for the production of Polyethylene glycol (PEG) coatings on titanium are compared, i.e. plasma polymerization, electrodeposition and silanization. The compared deposition methods presented similar wettability (hydrophilic coatings), chemical composition assessed by XPS and thickness around 1 nm. The coatings lowered albumin adsorption and presented a decreased fibroblast, Streptococcus sanguinis and Lactobacillus salivarius adhesion. Immobilization of a cell adhesion peptide (RGD) presented a higher fibroblast adhesion and no alteration of the bacterial adhesion, giving three methods for the biofunctionalization of titanium for dental implants. The feasibility of each methodology is compared in terms of the process parameters in order to provide a guide for the election of the methodology., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Two different strategies to enhance osseointegration in porous titanium: inorganic thermo-chemical treatment versus organic coating by peptide adsorption

  • Ortiz-Hernández, Monica
  • Rappe, Katrin S.
  • Molmeneu, Meritxell
  • Mas-Moruno, Carlos
  • Guillem Martí, Jordi
  • Punset fuste, Miquel
  • CAPARROS, CRISTINA
  • Calero, Jose
  • franch, jordi
  • Fernandez-Fairen, Mariano
  • Gil, FJ
The authors thank the Spanish Government for financial support through a Ramon y Cajal grant of C.M.-M. (RYC-2015-18566) and Projects No. MAT2015-67183-R and MAT2017-83905-R (MINECO/FEDER), co-funded by the European Union through European Regional Development Funds, and the Government of Catalonia (2017 SGR1165)., In this study, highly-interconnected porous titanium implants were produced by powder sintering with different porous diameters and open interconnectivity. The actual foams were produced using high cost technologies: Chemical Vapor Deposition (CVD), Physical Vapor Deposition (PVD), and spark plasma sintering, and the porosity and/or interconnection was not optimized. The aim was to generate a bioactive surface on foams using two different strategies, based on inorganic thermo-chemical treatment and organic coating by peptide adsorption, to enhance osseointegration. Porosity was produced using NaCl as a space holder and polyethyleneglicol as a binder phase. Static and fatigue tests were performed in order to determine mechanical behaviors. Surface bioactivation was performed using a thermo-chemical treatment or by chemical adsorption with peptides. Osteoblast-like cells were cultured and cytotoxicity was measured. Bioactivated scaffolds and a control were implanted in the tibiae of rabbits. Histomorphometric evaluation was performed at 4 weeks after implantation. Interconnected porosity was 53% with an average diameter of 210 µm and an elastic modulus of around 1 GPa with good mechanical properties. The samples presented cell survival values close to 100% of viability. Newly formed bone was observed inside macropores, through interconnected porosity, and on the implant surface. Successful bone colonization of inner structure (40%) suggested good osteoconductive capability of the implant. Bioactivated foams showed better results than non-treated ones, suggesting both bioactivation strategies induce osteointegration capability., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface guidance of stem cell behavior: chemically tailored co-presentation of integrin-binding peptides stimulates osteogenic differentiation in vitro and bone formation in vivo

  • Fraioli, Roberta
  • Dashnyam, Khandmaa
  • Kim, Joong-Hyun
  • Pérez Antoñanzas, Roman
  • Kim, Hae-Won
  • Gil Mur, Francisco Javier
  • Ginebra Molins, Maria Pau
  • Manero Planella, José María
  • Mas Moruno, Carlos
The authors thank the Spanish Government for financial support through Project No. MAT2015-67183-R (MINECO-FEDER), co-funded by the European Union through European Regional Development Funds. R.F. and C.M.-M thank the Government of Catalonia for financial support through a pre-doctoral and post-doctoral fellowship, respectively. C.M.-M also thanks the People Programme (Marie Curie Actions) of the European Union's Seventh Framework Programme (FP7-PEOPLE-2012-CIG, REA Grant Agreement No. 321985) for funding this project. Partial financial supports from Korea government are also acknowledged (grant no. 2009-0093829 & 2015032163). Dr. M. Dominguez (CRNE, UPC) is acknowledged for conducting XPS measurements and Mrs. C. Lorrain for technical support with the mineralization studies., Surface modification stands out as a versatile technique to create instructive biomaterials that are able to actively direct stem cell fate. Chemical functionalization of titanium has been used in this work to stimulate the differentiation of human mesenchymal stem cells (hMSCs) into the osteoblastic lineage, by covalently anchoring a synthetic double-branched molecule (PTF) to the metal that allows a finely controlled presentation of peptidic motifs. In detail, the effect of the RGD adhesive peptide and its synergy motif PHSRN is studied, comparing a random distribution of the two peptides with the chemically-tailored disposition within the custom made synthetic platform, which mimics the interspacing between the motifs observed in fibronectin. Contact angle measurement and XPS analysis are used to prove the efficiency of functionalization. We demonstrate that, by rationally designing ligands, stem cell response can be efficiently guided towards the osteogenic phenotype: In vitro, PTF-functionalized surfaces support hMSCs adhesion, with higher cell area and formation of focal contacts, expression of the integrin receptor α5β1 and the osteogenic marker Runx2, and deposition a highly mineralized matrix, reaching values of mineralization comparable to fibronectin. Our strategy is also demonstrated to be efficient in promoting new bone growth in vivo in a rat calvarial defect. These results highlight the efficacy of chemical control over the presentation of bioactive peptides; such systems may be used to engineer bioactive surfaces with improved osseointegrative properties, or can be easily tuned to generate multi-functional coatings requiring a tailored disposition of the peptidic motifs., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mineralization of titanium surfaces: biomimetic implants

  • Gil Mur, Francisco Javier
  • Manero Planella, José María
  • Rupérez de Gracia, Elisa
  • Velasco-Ortega, Eugenio
  • Jiménez-Guerra, Alvaro
  • Ortiz-Garcia, Iván
  • Monsalve Guil, Loreto
The authors thank the Spanish government for financial support through a Ramon y Cajal grant to C.M.-M. (RYC-2015-18566), and projects No. MAT2015-67183-R, MAT2017-83905-R, RTI2018-098075-B-C21, and RTI2018-098075-BC22, cofunded by the EU through the European Regional Development Funds (MINECO-FEDER, EU)., The surface modification by the formation of apatitic compounds, such as hydroxyapatite, improves biological fixation implants at an early stage after implantation. The structure, which is identical to mineral content of human bone, has the potential to be osteoinductive and/or osteoconductive materials. These calcium phosphates provoke the action of the cell signals that interact with the surface after implantation in order to quickly regenerate bone in contact with dental implants with mineral coating. A new generation of calcium phosphate coatings applied on the titanium surfaces of dental implants using laser, plasma-sprayed, laser-ablation, or electrochemical deposition processes produces that response. However, these modifications produce failures and bad responses in long-term behavior. Calcium phosphates films result in heterogeneous degradation due to the lack of crystallinity of the phosphates with a fast dissolution; conversely, the film presents cracks, which produce fractures in the coating. New thermochemical treatments have been developed to obtain biomimetic surfaces with calcium phosphate compounds that overcome the aforementioned problems. Among them, the chemical modification using biomineralization treatments has been extended to other materials, including composites, bioceramics, biopolymers, peptides, organic molecules, and other metallic materials, showing the potential for growing a calcium phosphate layer under biomimetic conditions., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Single-step pulsed electrodeposition of calcium phosphate coatings on titanium for drug delivery

  • Vidal Girona, Elia
  • Buxadera Palomero, Judit
  • Pierre, Camille
  • Manero Planella, José María
  • Ginebra Molins, Maria Pau
  • Cazalbou, Sophie
  • Combes, Christele
  • Rupérez de Gracia, Elisa
  • Rodríguez Rius, Daniel
Metallic implants have some limitations related to bioactivity and bacteria colonization leading to infections. In this regard, calcium phosphate coatings can be used as carrier for drug delivery in order to improve the mentioned drawbacks. The present work proposes the introduction of an antibacterial agent in the course of a pulsed and reverse pulsed electrodeposition. Calcium phosphate coatings were prepared in 30¿min using different pulse waveforms (unipolar-bipolar), current densities (2–5¿mA/cm2) and temperatures (40–60¿°C). Mechanical stability of the as-coated surfaces was studied in order to select the optimal electrodeposition conditions. Subsequently, selected coatings were loaded with an antiseptic agent, chlorhexidine digluconate (CHX), via a single-step co-deposition procedure. CHX concentration added to the electrolyte was adjusted to 3¿mM based on the antibacterial efficacy of the loaded coatings evaluated in vitro with Staphylococcus aureus and Escherichia coli bacteria strains. Whereas the same chlorhexidine concentration was added to the electrolyte, results showed that the amount of CHX loaded was different for each condition while release kinetics was maintained. The results of this work demonstrate that a pulsed co-deposition strategy has great potential to modulate local delivery of antibacterial agents such as chlorhexidine digluconate, which may prevent early phase infections of metallic implants after insertion., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polyethylene glycol pulsed electrodeposition for the development of antifouling coatings on titanium

  • Buxadera-Palomero, Judit
  • Albó, Kim
  • Gil, FJ
  • Mas-Moruno, Carlos
  • Rodríguez, Daniel
This research was funded by the Technical University of Catalonia and Fundación Ramón Areces through the fellowship of J.B.-P. Funding was also provided by Fundación Ramón Areces through project “Biosellado”, and the Spanish Government through projects Nos. MAT2015-67183-R and MAT2017-83905-R, co-funded by the EU through European Regional Development Funds, and a Ramon y Cajal grant of C.M.-M. (RYC-2015-18566). The authors also thank the Government of Catalonia (Grant No. 2017 SGR-1165)., Titanium dental implants are widely used for the replacement of damaged teeth. However, bacterial infections at the interface between soft tissues and the implant can impair the functionality of the device and lead to failure. In this work, the preparation of an antifouling coating of polyethylene glycol (PEG) on titanium by pulsed electrodeposition was investigated in order to reduce Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) adhesion while maintaining human fibroblast adhesion. Different pulsed conditions were prepared and characterized by contact angle, Focused Ion Beam (FIB), Fourier Transformed Infrared Spectroscopy in the Attenuated Total Reflectance mode (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). XPS tested fibronectin adsorption. S. aureus, E. coli and human fibroblast adhesion was tested in vitro in both mono and co-culture settings. Physicochemical characterization proved useful for confirming the presence of PEG and evaluating the efficiency of the coating methods. Fibronectin adsorption decreased for all of the conditions, but an adsorption of 20% when compared to titanium was maintained, which supported fibroblast adhesion on the surfaces. In contrast, S. aureus and E. coli attachment on coated surfaces decreased up to 90% vs. control titanium. Co-culture studies with the two bacterial strains and human fibroblasts showed the efficacy of the coatings to allow for eukaryotic cell adhesion, even in the presence of pre-adhered bacteria., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications

  • Guillem Martí, Jordi
  • Cinca, Núria
  • Punset Fuste, Miquel
  • García Cano, Irene
  • Gil Mur, Francisco Javier
  • Guilemany, José Maria
  • Dosta, Sergi
This work was supported by the Spanish Government through project MAT2015-67183- R, cofounded by the EU through the European Regional Development Funds. The authors acknowledge also the Generalitat de Catalunya for funding the project 2017SGR-1165 and for the ICREA Award of M-P Ginebra., The lack of bioactivity of titanium (Ti) is one of the main drawbacks for its application in biomedical implants since it can considerable reduce its osseointegration capacities. One strategy to overcome this limitation is the coating of Ti with hydroxyapatite (HA), which presents similar chemical composition than bone. Nonetheless, most of the strategies currently used generate a non-stable coating and may produce the formation of amorphous phases when high temperatures are used. Herein, we proposed to generate a Ti-HA composite coating on Ti surface to improve the stability of the bioactive coating. The coating was produced by cold gas spraying, which uses relatively low temperatures, and compared to a Ti coating. The coating was thoroughly characterized in terms of morphology, roughness, porosity and phase composition. In addition, the coating was mechanically characterized using a tensile loading machine. Finally, biological response was evaluated after seeding SaOS-2 osteoblasts and measuring cell adhesion, proliferation and differentiation. The novel Ti-HA coating presented high porosity and high adhesion and bond strengths. No change in HA phases was observed after coating formation. Moreover, osteoblast-like cells adhered, proliferated and differentiated on Ti-HA coated surfaces suggesting that the novel coating might be a good candidate for biomedical applications., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of biomimetic NiTi alloy: influence of thermo-chemical treatment on the physical, mechanical and biological behavior

  • Rupérez de Gracia, Elisa
  • Manero Planella, José María
  • Bravo-González, Luis Alberto
  • Espinar-Escalona, Eduardo
  • Gil Mur, Francisco Javier
This work was supported by cicyt Spanish project MAT2015-67183-R and the Andorra and Catalan Government for CTP grants., A bioactive layer, free of nickel, has been performed for its greater acceptability and reliability in clinical applications for NiTi shape memory alloys. In the first step, a safe barrier against Ni release has been produced on the surface by means of a thicker rutile/anastase protective layer free of nickel. In the second step, a sodium alkaline titanate hydrogel, which has the ability to induce apatite formation, has been performed from oxidized surface. An improvement of host tissue–implant integration has been achieved in terms of Ni ions release and the bioactivity of the treated NiTi alloys has been corroborated with both in vitro and in vivo studies. The transformation temperatures (As, Af, Ms, and Mf), as well as the critical stresses (σβ⇔M), have been slightly changed due to this surface modification. Consequently, this fact must be taken into account in order to design new surface modification on NiTi implants., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Importance of the roughness and residual stresses of dental implants on fatigue and osseointegration behavior. In vivo study in rabbits

  • Velasco Ortega, E
  • Monsalve Guil, L
  • Jimenez Guerra, A
  • Ortiz Garcia, Ivan
  • Moreno Muñoz, Jesus
  • Nuñez Marquez, Enrique
  • Pegueroles Neyra, Marta
  • Pérez Antoñanzas, Román
  • Gil Mur, Francisco Javier
This study focuses on the fatigue behavior and bone-implant attachment for the more usual surfaces of the different CP-titanium dental implants. The implants studied were: as-received (CTR), acid etching (AE), spark-anodization (SA), and with a grit-blasted surface (GB). Residual stresses were determined by means of X-ray diffraction. The fatigue tests were carried out at 37°C on 160 dental implants, and the stress-failure (S-N) curve was determined. The fatigue tests showed that the grit-blasting process improved fatigue life. This is a consequence of the layer of compressive residual stresses that the treatment generates in titanium surfaces. Further, our aim was to assess and compare the short- and midterm bone regenerative potential and mechanical retention of the implants in bone of New Zealand rabbits. The mechanical retention after 4 and 10 weeks of implantation was evaluated with histometric and pull-out tests, respectively, as a measure of the osseointegration of the implants. The results demonstrated that the GB treatment produced microrough that accelerated bone tissue regeneration and increased mechanical retention in the bone bed at short periods of implantation in comparison with all other implants tested. The GB surface produced an improvement in mechanical long-time behavior and improved bone growth. These types of treated implants can have great potential in clinical applications, as evidenced by the outcomes of the current study., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Reseña (Review)

Antimicrobial peptides: powerful biorecognition elements to detect bacteria in biosensing technologies

  • Hoyos Nogués, Mireia
  • Gil Mur, Francisco Javier
  • Mas Moruno, Carlos
This article belongs to the Special Issue Antimicrobial Peptides and Peptidomimetics, This research was funded by the Spanish Government through a Ramon y Cajal grant of C.M.-M. (RYC-2015-18566) and Projects No. MAT2015-67183-R and MAT2017-83905-R (MINECO/FEDER), co-funded by the European Union through European Regional Development Funds, and the Government of Catalonia (2017 SGR116)., Bacterial infections represent a serious threat in modern medicine. In particular, biofilm treatment in clinical settings is challenging, as biofilms are very resistant to conventional antibiotic therapy and may spread infecting other tissues. To address this problem, biosensing technologies are emerging as a powerful solution to detect and identify bacterial pathogens at the very early stages of the infection, thus allowing rapid and effective treatments before biofilms are formed. Biosensors typically consist of two main parts, a biorecognition moiety that interacts with the target (i.e., bacteria) and a platform that transduces such interaction into a measurable signal. This review will focus on the development of impedimetric biosensors using antimicrobial peptides (AMPs) as biorecognition elements. AMPs belong to the innate immune system of living organisms and are very effective in interacting with bacterial membranes. They offer unique advantages compared to other classical bioreceptor molecules such as enzymes or antibodies. Moreover, impedance-based sensors allow the development of label-free, rapid, sensitive, specific and cost-effective sensing platforms. In summary, AMPs and impedimetric transducers combine excellent properties to produce robust biosensors for the early detection of bacterial infections., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A dual molecular biointerface combining RGD and KRSR sequences improves osteoblastic functions by synergizing integrin and cell-membrane proteoglycan binding

  • Hoyos Nogués, Mireia
  • Falgueras Batlle, Elena
  • Ginebra Molins, Maria Pau
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Mas Moruno, Carlos
Synergizing integrin and cell-membrane heparan sulfate proteoglycan signaling on biomaterials through peptidic sequences is known to have beneficial effects in the attachment and behavior of osteoblasts; however, controlling the exact amount and ratio of peptides tethered on a surface is challenging. Here, we present a dual molecular-based biointerface combining integrin (RGD) and heparin (KRSR)-binding peptides in a chemically controlled fashion. To this end, a tailor-made synthetic platform (PLATF) was designed and synthesized by solid-phase methodologies. The PLATF and the control linear peptides (RGD or KRSR) were covalently bound to titanium via silanization. Physicochemical characterization by means of contact angle, Raman spectroscopy and XPS proved the successful and stable grafting of the molecules. The biological potential of the biointerfaces was measured with osteoblastic (Saos-2) cells both at short and long incubation periods. Biomolecule grafting (either the PLATF, RGD or KRSR) statistically improved (p < 0.05) cell attachment, spreading, proliferation and mineralization, compared to control titanium. Moreover, the molecular PLATF biointerface synergistically enhanced mineralization (p < 0.05) of Saos-2 cells compared to RGD or KRSR alone. These results indicate that dual-function coatings may serve to improve the bioactivity of medical implants by mimicking synergistic receptor binding., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A dual molecular biointerface combining RGD and KRSR sequences Improves osteoblastic functions by synergizing integrin and cell-membrane proteoglycan binding

  • Hoyos Nogués, Mireia
  • Falgueras Batlle, Elena
  • Ginebra Molins, Maria Pau
  • Manero Planella, José María
  • Gil Mur, Francisco Javier
  • Mas Moruno, Carlos
This article belongs to the Special Issue Biomaterials for Musculoskeletal System, This research was funded by the Spanish Government (Ramon y Cajal grant of C.M.-M., and projects MAT2015-67183-R and MAT2017-83905-R (MINECO/FEDER)) and the Government of Catalonia (2017 SGR-116533 and ICREA academia fellowship of M.-P.G.)., info:eu-repo/grantAgreement/ES/MINECO/MAT2017-83905-R, Synergizing integrin and cell-membrane heparan sulfate proteoglycan signaling on biomaterials through peptidic sequences is known to have beneficial effects in the attachment and behavior of osteoblasts; however, controlling the exact amount and ratio of peptides tethered on a surface is challenging. Here, we present a dual molecular-based biointerface combining integrin (RGD) and heparin (KRSR)-binding peptides in a chemically controlled fashion. To this end, a tailor-made synthetic platform (PLATF) was designed and synthesized by solid-phase methodologies. The PLATF and the control linear peptides (RGD or KRSR) were covalently bound to titanium via silanization. Physicochemical characterization by means of contact angle, Raman spectroscopy and XPS proved the successful and stable grafting of the molecules. The biological potential of the biointerfaces was measured with osteoblastic (Saos-2) cells both at short and long incubation periods. Biomolecule grafting (either the PLATF, RGD or KRSR) statistically improved (p < 0.05) cell attachment, spreading, proliferation and mineralization, compared to control titanium. Moreover, the molecular PLATF biointerface synergistically enhanced mineralization (p < 0.05) of Saos-2 cells compared to RGD or KRSR alone. These results indicate that dual-function coatings may serve to improve the bioactivity of medical implants by mimicking synergistic receptor binding., info:eu-repo/semantics/acceptedVersion