Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-temperature liquid precursors of crystalline metal oxides assisted by heterogeneous photocatalysis

  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Pérez-Mezcua, Dulce
  • Salazar, Norberto
  • Ricote, J.
  • Calzada, M. L.
The photocatalytically assisted decomposition of liquid precursors of metal oxides incorporating TiO2 particles enables the preparation of functional layers from the ferroelectric Pb(Zr,Ti)O3 and multiferroic BiFeO3 perovskite systems at temperatures not exceeding 350 ºC. This enables direct deposition on flexible plastic, where the multifunctionality provided by these complex-oxide materials guarantees their potential use in next-generation flexible electronics., This work was financed by Spanish Project MAT2013-40489-P (Ministerio de Economía y Competitividad, MINECO) and PIE-201460E094 (CSIC). Support from the FPU (Formación del Profesorado Universitario) Spanish Program (D.P.-M.) and EC ITN (European Commission Innovative Training Network) NANOMOTION grant 290158 (N.S.) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of excesses of volatile elements on structure and composition of solution derived lead-free (Bi0.50Na0.50)1xBaxTiO3 thin films

  • Pérez-Mezcua, Dulce
  • Calzada, M. L.
  • Bretos, Íñigo
  • Ricote, J.
  • Jiménez, Ricardo
  • Fuentes-Cobas, Luis
  • Escobar Galindo, R.
  • Chateigner, D.
  • Sirera, Rafael
The preparation of (Bi0.50Na0.50)1−xBaxTiO3 films requires a compositional/structural control, as they determine the functionality of these materials. We report a systematic compositional and structural analysis on (Bi0.50Na0.50)1−xBaxTiO3 films fabricated by chemical solution deposition. The effects of incorporating Na(I) and Bi(III) excesses are analyzed through the comparison of the compositional depth profiles of stoichiometric films (BNBT) and films containing excesses (BNBTxs). Heterogeneous compositional profiles with larger bismuth content close to the substrate and thicker film-substrate interfaces are observed in BNBTxs, unlike stoichiometric films, which show atomic concentrations that correspond to the nominal composition of the precursor solution. Excesses induce structural differences in depth, observing a shift of the region of coexistence of rhombohedral and tetragonal phases (morphotropic phase boundary) toward higher x values and the formation of thick film-substrate interfaces. In contrast, stoichiometric films have homogeneous compositional and structural profiles with the MPB placed close to that described for bulk ceramics., This work was financed by Spanish Project MAT2013-40489-P. D. Pérez-Mezcua acknowledges the financial support of the FPU Spanish program (AP2012-0639). A portion of this research was carried out at the Stanford Synchrotron Radiation Lightsource, a national user facility operated by Stanford University. D. Chateigner acknowledges the Conseil Régional de Basse Normandie for its partial financial of the four-circles X-ray diffractometer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A UV-absorber bismuth(III)-N-methyldiethanolamine complex as a low-temperature precursor for bismuth-based oxide thin films

  • Pérez-Mezcua, Dulce
  • Sirera, Rafael
  • Jiménez, Ricardo
  • Bretos, Íñigo
  • Dobbelaere, Christopher de
  • Hardy, An
  • Bael, Marlies K. van
  • Calzada, M. L.
© the Partner Organisations 2014. Novel synthetic methods in solution that reduce the formation temperature of bismuth-based electronic oxides are essential for their successful integration with substrates of low thermal stability within micro- and flexible-electronic devices. This has become crucial for these oxides, since they appear as promising low-toxic functional materials alternative to other electronic oxides containing heavy metals. However, this is a challenge, since the crystallization of bismuth oxides occurs at high temperatures. To overcome these problems, we synthesize here a UV-absorber charge transfer metal complex in solution between the Bi(iii) ion and an alkanolamine, N-methyldiethanolamine (Bi(iii)-mdea). We take advantage of the photoreactivity of this complex to prepare bismuth-based oxide thin films at low temperature, which cannot be achieved by traditional thermal processing methods. Room temperature stable oxide thin films of the high-temperature δ-Bi2O3 phase are prepared from these solutions by UV-irradiation and annealing at 350 °C. The efficiency of this synthetic strategy is additionally proven for the low temperature preparation of thin films of much more complex bismuth based functional oxides: the multiferroic bismuth ferrite, BiFeO3, and the relaxor-ferroelectric perovskite of bismuth, sodium and barium titanate, (Bi0.5Na0.5)0.945Ba0.055TiO3. This journal is, This work was financed by the Spanish Project MAT2010-15365 and MAT2013-40489. D. Pérez-Mezcua acknowledges the financial support of the FPU Spanish program (AP2012-0639 Grant). I. Bretos and C. De Dobbelaere are postdoctoral fellows financed by the Juan de la Cierva Spanish Programme and the Fund for Scientific Research of Flanders (FWO), respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced ferroelectric and ferromagnetic properties in lead-free multilayer composite films based on ferroelectric (Bi0.5Na0.5)0.945Ba0.055TiO3 and multiferroic BiFeO3

  • Pérez-Rivero, Armando
  • Ricote, J.
  • Bretos, Íñigo
  • García-Hernández, Mar
  • Calzada, M. L.
  • Jiménez, Ricardo
The study of the functional properties of the multilayer composite films of ferroelectric (Bi0.5Na0.5)0.945Ba0.055TiO3 (BNBT) and multiferroic BiFeO3 (BF) obtained by chemical solution deposition has been performed in this work. First, it has been observed a significant improvement of the remnant polarization of the multilayer composite with respect to the single phase film of BNBT: Pr = 32 μC × cm−2, which is comparable with the values reported for bulk BNBT. This is a consequence of the stabilization of the ferroelectric domains of BNBT, although the relaxor character is still present. The leakage currents, which prevent the full exploitation of the properties of BF films, are reduced thanks to the combination with insulator BNBT layers. Besides, the magnetic behavior shows values of remnant magnetization at room temperature that makes this multilayer composites promising for multiferroic applications., This work has been funded by the Spanish Project MAT2010-15365, MAT2013-40489-P, and MAT2011-C02-02. A. Perez-Rivero acknowledges the funding of his Spanish FPI Ph.D. grant. Dr. I. Bretos is a postdoctoral fellow of the Spanish Juan de la Cierva programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarization switching at room temperature of undoped BiFeO3 thin films crystallized at temperatures between 400 ≤ T ≤ 500 °C

  • Pérez-Rivero, Armando
  • Tomczyk, M.
  • Jiménez, Ricardo
  • Bretos, Íñigo
  • Ricote, J.
  • Vilarinho, Paula M.
  • Calzada, M. L.
Pure BiFeO3 perovskite thin films have been prepared on Pt-coated silicon substrates by chemical solution deposition at temperatures below 500 °C. Precursor solutions with and without Bi(III) excess have been used. Perovskite films without crystalline secondary phases, as detected by X-ray diffraction analysis, are obtained at the lowest temperature limit of 400 °C. However, the scanning electron micrographs of these films show surface microstructures formed by well defined grains surrounded by a fine grained phase, suggesting the appearance of a volume fraction of crystals in an early stage of crystallization. The films prepared with Bi(III) excess have better defined ferroelectric hysteresis loops than those without any excess, especially for the films annealed at 400 °C, which can be attributed to an improved connectivity of the ferroelectric phase. This together with the fact that leakage current densities in the films decrease with decreasing the processing temperature, make that the BiFeO3 films prepared with Bi(III) excess and annealed at 400 and 450 °C can be poled at room temperature, obtaining an effective switching of the ferroelectric polarization with the electric field. Remanent polarization values of PR ~ 10 and ~60 μC/cm2 with coercive fields of EC ~ 205 and 235 kV/cm were obtained for the films prepared at 400 and 450 °C, respectively. The demonstration of the functionality at room temperature of these low temperature processed undoped BiFeO3 thin films increases the interest in these materials for their integration in multiferroic devices., This work has been funded by the COST-Action IC1208 and the Spanish Projects MAT2010-15365 and MAT2013-40489-P. A. Perez-Rivero acknowledges the support of the FPI Spanish program and I. Bretos of “Juan de la Cierva” Spanish program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of sol–gel preparation conditions on structural characteristics and magnetic properties of M-type barium hexaferrite thin films

  • Solovyova, E. D.
  • Calzada, M. L.
  • Belous, A. G.
© 2015, Springer Science+Business Media New York. Abstract: We have shown the possibility to obtain M-type barium hexaferrite thin films with thickness of ~200–450 nm on the surface of dielectric α-Al<inf>2</inf>O<inf>3</inf> substrates with low microwave dielectric loss (tan δ ~ 10<sup>−4</sup> GHz) by a sol–gel method. For the production of high-dense homogeneous thin films of M-type barium hexaferrite (BaFe<inf>12</inf>O<inf>19</inf>, BHF) with nanorod-like grains and a uniform distribution of iron and barium ions, we have studied the synthesis conditions for thermally stable film-forming solutions with high concentrations of barium ions. Films with a c-axis magnetic texture were obtained by spin-coating the former solutions on α-Al<inf>2</inf>O<inf>3</inf> substrates and annealing at temperatures between 473 and 1073 K. The resulting textured M-type BHF films have demonstrated the following magnetic parameters: H<inf>c⊥</inf> = 334 kA/m, H<inf>c||</inf> = 167 kA/m; M<inf>s⊥</inf> = 0.005 emu, M<inf>s||</inf> = 0.003 emu for the films’ thickness of ~200 nm, and H<inf>c⊥</inf> = 360 kA/m, H<inf>c||</inf> = 338 kA/m; M<inf>s⊥</inf> = 0.009 emu, M<inf>s||</inf> = 0.007 emu for the films’ thickness of ~450 nm. These M-type BHF thin films can serve as a promising basis for further development of multilayer microwave resonant elements. Graphical Abstract: [Figure not available: see fulltext.], We acknowledge the project “NANOLICOM” (FP7-PEOPLE-2009-IRSES program, 2011–2014, Grant agreement No. 247579) and the partial support of the Spanish Project MAT2013-40489-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gaining new insight into low-temperature aqueous photochemical solution deposited ferroelectric PbTiO3 films

  • Dobbelaere, Christopher de
  • Calzada, M. L.
  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Hadermann, Joke
  • Hardy, An
  • Van Bael, Marlies K.
The nature of the low-temperature photochemical assisted formation process of ferroelectric lead titanate (PbTiO) films is studied in the present work. Films are obtained by the deposition of an aqueous solution containing citric acid based (citrato) metal ion complexes with intrinsic UV activity. This UV activity is crucial for the aqueous photochemical solution deposition (aqueous PCSD) route being used. UV irradiation enhances the early decomposition of organics and results in improved electrical properties for the crystalline oxide film, even if the film is crystallized at low temperature. GATR-FTIR shows that UV irradiation promotes the decomposition of organic precursor components, resulting in homogeneous films if applied in the right temperature window during film processing. The organic content, morphology and crystallinity of the irradiated films, achieved at different processing atmospheres and temperatures, is studied and eventually correlated to the functional behavior of the obtained films. This is an important issue, as crystalline films obtained at low temperatures often lack ferroelectric responses. In this work, the film prepared in pure oxygen at the very low temperature of 400 °C and after an optimized UV treatment presents a significant remanent polarization value of P = 8.8 μC cm. This value is attributed to the better crystallinity, the larger grain size and the reduced porosity obtained thanks to the early film crystallization effectively achieved through the UV treatment in oxygen., C. De Dobbelaere is a post-doctoral research fellow of the Research Foundation-Flanders (FWO Vlaanderen). Some of this work has been financed by the Spanish Project MAT2013-40489-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active layers of high-performance lead zirconate titanate at temperatures compatible with silicon nano- and microelectronic devices

  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Tomczyk, Monika
  • Rodríguez-Castellón, Enrique
  • Vilarinho, Paula M.
  • Calzada, M. L.
Applications of ferroelectric materials in modern microelectronics will be greatly encouraged if the thermal incompatibility between inorganic ferroelectrics and semiconductor devices is overcome. Here, solution-processable layers of the most commercial ferroelectric compound-morphotrophic phase boundary lead zirconate titanate, namely Pb(ZrTi)O (PZT)-are grown on silicon substrates at temperatures well below the standard CMOS process of semiconductor technology. The method, potentially transferable to a broader range of Zr:Ti ratios, is based on the addition of crystalline nanoseeds to photosensitive solutions of PZT resulting in perovskite crystallization from only 350 C after the enhanced decomposition of metal precursors in the films by UV irradiation. A remanent polarization of 10.0 μ cm is obtained for these films that is in the order of the switching charge densities demanded for FeRAM devices. Also, a dielectric constant of 90 is measured at zero voltage which exceeds that of current single-oxide candidates for capacitance applications. The multifunctionality of the films is additionally demonstrated by their pyroelectric and piezoelectric performance. The potential integration of PZT layers at such low fabrication temperatures may redefine the concept design of classical microelectronic devices, besides allowing inorganic ferroelectrics to enter the scene of the emerging large-area, flexible electronics., This work was financed by Spanish Projects MAT2013-40489-P (MINECO) and PIE-201460E094 (CSIC), and Portuguese Project Acções Integradas Luso-Espanholas 2012, ref.ª: E-98/12. The COST Action IC1208 also contributed to this study. Funding support from Fundação para a Ciência e a Tecnologia (FCT), Fundo Europeu de Desenvolvimento Regional Portugal (FEDER), QREN-COMPETE Portugal, and the Portuguese Associate Laboratory CICECO (PEst-C/CTM/LA0011/2013) is acknowledged. Monika Tomczyk acknowledges FCT for financial support (SFRH/BD/80123/2011).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemical solution processing of films of metastable phases for flexible devices: the β-Bi 2 O 3 polymorph

  • Pérez-Mezcua, Dulce
  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Jiménez Riobóo, R. J.
  • Silva, Cosmelina Gonçalves da
  • Chateigner, Daniel
  • Fuentes-Cobas, Luis
  • Sirera, Rafael
  • Calzada, M. L.
The potential of UV-light for the photochemical synthesis and stabilization of non-equilibrium crystalline phases in thin films is demonstrated for the β-Bi O polymorph. The pure β-Bi O phase is thermodynamically stable at high temperature (450-667 °C), which limits its applications in devices. Here, a tailored UV-absorbing bismuth(III)-N-methyldiethanolamine complex is selected as an ideal precursor for this phase, in order to induce under UV-light the formation of a -Bi-O-Bi- continuous network in the deposited layers and the further conversion into the β-Bi O polymorph at a temperature as low as 250 °C. The stabilization of the β-Bi O films is confirmed by their conductivity behavior and a thorough characterization of their crystal structure. This is also supported by their remarkable photocatalytic activity. Besides, this processing method has allowed us for the first time the preparation of β-Bi O films on flexible plastic substrates, which opens new opportunities for using these materials in potential applications not available until now (e.g., flexible photocatalytic reactors, self-cleaning surfaces or wearable antimicrobial fabrics). Therefore, photochemical solution deposition (PCSD) demonstrates to be not only an efficient approach for the low temperature processing of oxide films, but also an excellent alternative for the stabilization of metastable phases., This work was financed by Spanish Project MAT2013-40489-P and MAT2016-76851-R. The COST Action IC1208 also contributed to this study. I.B. acknowledges the financial support by Fundación General CSIC (Spanish ComFuturo Programme).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemical solution deposition of β-Bi2O3 thin films

  • Pérez-Mezcua, Dulce
  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Jiménez Riobóo, R. J.
  • Gonçalves da Silva, Cosmelina
  • Chateigner, Daniel
  • Fuentes-Cobas, Luis
  • Sirera, Rafael
  • Calzada, M. L.
The non-equilibrium β-Bi2O3 polymorph is stabilized in thin films by a photochemical synthesis method. A strong ultraviolet-absorbing bismuth(III)-N-methyldiethanolamine complex is synthesized in solution as an ideal precursor for the β-Bi2O3 phase. Ultraviolet-light induces the formation of an amorphous —Bi—O—Bi— continuous network in the films deposited from the former solution that easily converts into the β-Bi2O3 polymorph at a temperature as low as 250 °C. The room temperature stabilization of the β-Bi2O3 phase is confirmed by their structural characterization using four-circle X-ray diffractometry. This study unequivocally identified the tetragonal crystal structure of the β-Bi2O3 polymorph in the films. The high phase purity of these β-Bi2O3 films is responsible for their exceptional visible-light photocatalytic activity, thus enabling the applications of the films of this metastable phase at room-temperature conditions., This work has been financed by the Spanish Project MAT2013-40489-P and MAT2016-76851-R. I.B. acknowledges the financial support by Fundación General CSIC (Spanish ComFuturoProgramme)., MINECO/ICTI2013-2016/MAT2016-76851-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of the crystallization temperature on the reliability of PbTiO3 thin films prepared by chemical solution deposition

  • Hosiny Ali, Hitham el .
  • Ricote, J.
  • Calzada, M. L.
  • Bretos, Íñigo
  • Jiménez, Ricardo
The preparation of quality ferroelectric PbTiO (PT) thin films at the lowest possible temperature preserving its functional properties is necessary for their integration in microdevices. The crystallization below, close or above the para-ferrolectric transition temperature of the PbTiO must produce an important effect on the microstructure, texture and residual stress state of the films and on functional properties. In this paper, the Chemical Solution Deposition method has been used to prepare PbTiO films at different temperatures around that of the ferroelectric to paraelectric phase transition. The films were analyzed by X-ray diffraction, Optical and Scanning Electron Microscopy, and their microstructure, texture and residual stress correlated with their functional properties. The results show that these PT films prepared with crystallization temperatures close or below the phase transition develop a favorable microstructure and texture that lead to high remnant and saturation polarization values, making them good candidates for their integration in microdevices., This work has been funded by the Spanish ProjectsMAT2013-40489-P and MAT2016-76851-R. H. El Hosiny Ali acknowledges the Spanish Ministry of Science and Innovation for the financial support of his Ph.D. grant. I. Bretos acknowledges the financial support by Fundación General CSIC (Spanish ComFuturo Programme).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ergodicity of fine‐grained canonical relaxor ferroelectric (Bi0.5Na0.5)1‐xBaxTiO3 films

  • Salazar, Norberto
  • Pérez-Mezcua, Dulce
  • Calzada, M. L.
  • Gil, A.
  • Ricote, J.
The drastic reduction in dimensions in thin films, together with the low crystallization temperatures used, normally results in a large reduction in the grain size. It has been reported that relaxor ferroelectric states are stabilized at room temperature for fine‐grained ceramics and films that behave as normal ferroelectrics for large grains. In this work, the effects of the grain size reduction on the relaxor characteristics are analyzed for a composition that is already a canonical relaxor with a nonergodic state at room temperature: (Bi0.5Na0.5)1‐xBaxTiO3 (BNBT). The comparison of the local polar ordering within BNBT grains studied with piezoresponse force microscopy on large‐grained ceramics and fine‐grained thin films shows that the development of stable long‐range ferroelectric order with the application of an electric field is hampered due to the small grain size of the grains. The ergodic character of the high‐temperature phase is thus stabilized at room temperature, following a similar mechanism as the one discussed for other noncanonical relaxors., Secretaría de Estado de Investigación, Desarrollo e Innovación. Grant Numbers: MAT2013‐40489‐P, MAT2016‐76851‐R Ministerio de Educación, Cultura y Deporte. Grant Number: Formación de Personal Universitario (AP2012‐0639) FP7 Ideas: European Research Council. Grant Number: Initial Training Network “Nanomotion” (grant agr