Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photochemical solution processing of films of metastable phases for flexible devices: the β-Bi 2 O 3 polymorph

  • Pérez-Mezcua, Dulce
  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Jiménez Riobóo, R. J.
  • Silva, Cosmelina Gonçalves da
  • Chateigner, Daniel
  • Fuentes-Cobas, Luis
  • Sirera, Rafael
  • Calzada, M. L.
The potential of UV-light for the photochemical synthesis and stabilization of non-equilibrium crystalline phases in thin films is demonstrated for the β-Bi O polymorph. The pure β-Bi O phase is thermodynamically stable at high temperature (450-667 °C), which limits its applications in devices. Here, a tailored UV-absorbing bismuth(III)-N-methyldiethanolamine complex is selected as an ideal precursor for this phase, in order to induce under UV-light the formation of a -Bi-O-Bi- continuous network in the deposited layers and the further conversion into the β-Bi O polymorph at a temperature as low as 250 °C. The stabilization of the β-Bi O films is confirmed by their conductivity behavior and a thorough characterization of their crystal structure. This is also supported by their remarkable photocatalytic activity. Besides, this processing method has allowed us for the first time the preparation of β-Bi O films on flexible plastic substrates, which opens new opportunities for using these materials in potential applications not available until now (e.g., flexible photocatalytic reactors, self-cleaning surfaces or wearable antimicrobial fabrics). Therefore, photochemical solution deposition (PCSD) demonstrates to be not only an efficient approach for the low temperature processing of oxide films, but also an excellent alternative for the stabilization of metastable phases., This work was financed by Spanish Project MAT2013-40489-P and MAT2016-76851-R. The COST Action IC1208 also contributed to this study. I.B. acknowledges the financial support by Fundación General CSIC (Spanish ComFuturo Programme).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of the crystallization temperature on the reliability of PbTiO3 thin films prepared by chemical solution deposition

  • Hosiny Ali, Hitham el .
  • Ricote, J.
  • Calzada, M. L.
  • Bretos, Íñigo
  • Jiménez, Ricardo
The preparation of quality ferroelectric PbTiO (PT) thin films at the lowest possible temperature preserving its functional properties is necessary for their integration in microdevices. The crystallization below, close or above the para-ferrolectric transition temperature of the PbTiO must produce an important effect on the microstructure, texture and residual stress state of the films and on functional properties. In this paper, the Chemical Solution Deposition method has been used to prepare PbTiO films at different temperatures around that of the ferroelectric to paraelectric phase transition. The films were analyzed by X-ray diffraction, Optical and Scanning Electron Microscopy, and their microstructure, texture and residual stress correlated with their functional properties. The results show that these PT films prepared with crystallization temperatures close or below the phase transition develop a favorable microstructure and texture that lead to high remnant and saturation polarization values, making them good candidates for their integration in microdevices., This work has been funded by the Spanish ProjectsMAT2013-40489-P and MAT2016-76851-R. H. El Hosiny Ali acknowledges the Spanish Ministry of Science and Innovation for the financial support of his Ph.D. grant. I. Bretos acknowledges the financial support by Fundación General CSIC (Spanish ComFuturo Programme).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of PbTiO3 layers in piezoelectric multilayer composite films based on Pb(Mg1/3Nb2/3)O3-PbTiO3

  • Hosiny Ali, H. el
  • Jiménez, Ricardo
  • Ramos, Pau
  • Pérez de la Cruz, J.
  • Fernandes, J. R. A.
  • Bretos, Íñigo
  • Calzada, M. L.
  • Ricote, J.
The sharp decrease of the remnant ferroelectric and piezoelectric properties of Pb(MgNb)O-PbTiO (PMNT) thin films close to the Morphotropic Phase Boundary (MPB) respect to their corresponding bulk ceramics is a major drawback for their integration in microdevices. In order to take full advantage of the excellent piezoelectric properties of polycrystalline PMNT in thin film form, a multilayer configuration with PbTiO (PT) layers is proposed. The PT layers generate an internal electric bias within the PMNT layer, which anchor an induced polarization in it. This results in a significant improvement of the piezoelectric behavior, obtaining remnant piezoelectric coefficients, d, as high as 67 pm V. The role of the thickness of the PT layers used is discussed, in order to find the optimum configuration for these multilayers., This work was supported by the Spanish Secretaría de Estado de Investigación, Desarrollo e Innovación [Projects MAT2013-40-489-P and MAT2016-76851-R].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructure stabilization by low-temperature dopant pinning in multiferroic BiFeO3-based thin films produced by aqueous chemical solution deposition

  • Gumiel, Carlos
  • Jardiel, Teresa
  • Calatayud, David G.
  • Vranken, Thomas
  • Van Bael, Marlies K.
  • Hardy, An
  • Calzada, M. L.
  • Jiménez, Ricardo
  • García-Hernández, Mar
  • Mompean, Federico J.
  • Caballero Cuesta, Amador
  • Peiteado, Marco
[EN] The metastability impediment which usually prevents the obtaining of a phase-pure BiFeO3 material can be dramatically stressed when taking the system to the thin film configuration. In order to preserve the stoichiometry, the films need to be processed at low temperatures and hence the solid-state diffusion processes which usually govern the microstructural evolution in bulk cannot be expected to also rule the development of the functional films. All these circumstances were presumed when exploring the possibilities of an aqueous solution–gel process plus spin-coating deposition method to reproduce, in thin film dimensions, the excellent multiferroic properties that have been previously observed with an optimized rare-earth and Ti4+-codoped BiFeO3 bulk composition. The experiments indicate high reliability for the tested methodology, allowing for the obtaining of homogeneous dense films at temperatures as low as 600 1C and with a tunable multiferroic response depending on the formulated rare-earth (Sm or Nd). Thorough structural characterization of the films reveals that despite the low temperature processing restrictions, effective microstructural control is achieved at the nanoscale, which is attributed to effective retention (pinning) of the dopants inside the perovskite structure of BiFeO3., his work was supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) under projects MAT2016-80182-R, MAT2017-87134-c2-2-R and partially by the project MAT2016-76851-R. It was also supported by the Research Foundation Flanders (FWO-Vlaanderen), project number G039414N. Dr T. Jardiel acknowledges the European Science Foundation (ESF) and the Ramon y Cajal Program of MICINN for the financial support. Work by Dr Calatayud was also supported by Fundación General CSIC (COMFUTURO Program). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ergodicity of fine‐grained canonical relaxor ferroelectric (Bi0.5Na0.5)1‐xBaxTiO3 films

  • Salazar, Norberto
  • Pérez-Mezcua, Dulce
  • Calzada, M. L.
  • Gil, A.
  • Ricote, J.
The drastic reduction in dimensions in thin films, together with the low crystallization temperatures used, normally results in a large reduction in the grain size. It has been reported that relaxor ferroelectric states are stabilized at room temperature for fine‐grained ceramics and films that behave as normal ferroelectrics for large grains. In this work, the effects of the grain size reduction on the relaxor characteristics are analyzed for a composition that is already a canonical relaxor with a nonergodic state at room temperature: (Bi0.5Na0.5)1‐xBaxTiO3 (BNBT). The comparison of the local polar ordering within BNBT grains studied with piezoresponse force microscopy on large‐grained ceramics and fine‐grained thin films shows that the development of stable long‐range ferroelectric order with the application of an electric field is hampered due to the small grain size of the grains. The ergodic character of the high‐temperature phase is thus stabilized at room temperature, following a similar mechanism as the one discussed for other noncanonical relaxors., Secretaría de Estado de Investigación, Desarrollo e Innovación. Grant Numbers: MAT2013‐40489‐P, MAT2016‐76851‐R Ministerio de Educación, Cultura y Deporte. Grant Number: Formación de Personal Universitario (AP2012‐0639) FP7 Ideas: European Research Council. Grant Number: Initial Training Network “Nanomotion” (grant agr
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beta phase crystallization and ferro/piezoelectric performances of melt-processed PVDF blends with PMMA copolymers containing ionizable moieties

  • de Neef, Alexandre
  • Samuel, Cédric
  • Amorín, Harvey
  • Stoclet, Gregory
  • Jiménez, Ricardo
  • Dubois, Philippe
  • Soulestin, Jérémie
  • Raquez, Jean-Marie
[EN] Poly(methyl methacrylate-co-methacrylic acid) (PMMA-co-MAA) copolymer containing ionizable moieties is here investigated as a melt processing additive for PVDF to develop high-quality ferro/piezoelectric polymer films by extrusion-calendering. The PVDF/PMMA-co-MAA miscibility and the β-phase crystallization from the melt state at high cooling rates were first explored by Flash DSC. Transposition to the melt-processing of thin films by extrusion-calendering is attempted and a direct production of β-crystals in high amounts is attested at a specific content of 5 wt-% PMMA-co-MAA. Ferro/piezoelectric properties were subsequently investigated and classical ferroelectric-type hysteresis loops clearly appear at room temperature for AC electric fields higher than 900 – 1200 kV/cm. Enhanced remanent polarizations (P) are observed with only 5 wt-% PMMA-based additives and the best ferroelectric performances are identified for PVDF/PMMA-co-MAA blends, in agreement with a higher β-phase content. Stable piezoelectric properties are also highlighted with maximal piezoelectric coefficient (d) of 11 pC/N for these formulations. A linear relationship is found between d and P in accordance with several models and, in this respect, the origin/optimization of the remanent polarization was investigated. Crystal transformations are revealed during high-voltage AC poling and high-quality ferroelectric behaviors with high P values up to 7 µC/cm are obtained at elevated poling temperatures for PVDF/PMMA-co-MAA blends (theoretical d up to 16 pC/N) approaching the theoretical limit value for perfectly-poled β-crystals. This study clearly opens up interesting perspectives in the development of cost-effective electroactive polymer films using industrially-relevant processes and demonstrates that PVDF-based blends with miscible functional PMMA copolymers represent an interesting approach for this purpose., Authors gratefully acknowledge the Wallonia Region/Service Public de Wallonie (Belgium), West Vlaanderen Region (Belgium), Agentschap Innoveren Ondernemen (Belgium) and European Commission (FEDER) for the financial support in the framework of the INTERREG V FWVL program (BIOHARV project, GoToS3 portofolio). Authors particularly thank Samuel Devisme from Arkema (France) for supplying raw materials. UMons (LPCM) gratefully acknowledges the Belgian Federal Government Office of Science Policy/Belgian Federal Science Policy Office (SSTC – PAI 6/27, Belgium) for general support and is much indebted to both the Wallonia Region/Service Public de Wallonie (Belgium) and the European Commission (FEDER) for financial support in the frame of phasing-out Hainaut. IMT Lille Douai and Université de Lille acknowledge both the International Campus on Safety and Intermodality in Transportation (CISIT, France), the Hauts-de-France Region (France) and the European Commission (FEDER) for their contributions to funding extrusion equipments, SAXS-WAXS laboratory equipments and calorimetric characterization tools. Authors also thanks the Spanish Ministerio de Economía y Competitividad (MINECO) for financial supports of MAT2017-88788-R and MAT2016-76851-R projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoferroelectric Thin Films for Flexible Systems by a Three-in-One Solution-Based Approach

  • Bretos, Íñigo
  • Jiménez, Ricardo
  • Ricote, J.
  • Sirera, Rafael
  • Calzada, M. L.
[EN] The effective incorporation of (multi)functional oxides into next-generation flexible electronics systems requires novel fabrication technologies that enable the direct integration of crystalline oxide layers in them. Unfortunately, this is considerably challenging due to the thermal incompatibility between the crystallization temperatures of metal oxides (>600 °C) and the thermal stability of the flexible polymer substrates conventionally used (<400 °C). Here, it is shown that BiFeO thin films can be grown on flexible plastic by solution processing involving three different but complementary strategies to induce the crystallization of the perovskite phase at a lower temperature limit of 325 °C. This “three-in-one” approach is based on the synthesis of tailored metal precursors i) with a molecular structure resembling the crystalline structure of the oxide phase, which additionally allows both ii) photochemical and iii) internal combustion reactions taking place in the thin films. The flexible BiFeO thin films obtained from a specifically designed molecular complex with N-methyldiethanolamine yield a large remnant polarization of 17.5 µC cm, also showing photovoltaic and photocatalytic effects. This result paves the way for the direct integration of an interesting class of oxides with photoferroelectric properties in flexible devices with multiple applications in information and communication technology, and energy., Funding from Spanish Projects MAT2016-76851-R and MAT2017-91772-EXP (Ministry of Science, Innovation and Universities). I.B. acknowledges financial support from Spanish “Ramón y Cajal” Programme (RYC-2016-20047).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-Free Design of Biobased Non-isocyanate Polyurethanes with Ferroelectric Properties

  • Sessini, Valentina
  • Thai, Cuong Nguyen
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Samuel, Cédric
  • Caillol, Sylvain
  • Cornil, Jérôme
  • Hoyas, Sébastien
  • Barrau, Sophie
  • Dubois, Philippe
  • Leclère, Philippe
  • Raquez, Jean-Marie
[EN] Increasing energy autonomy and lowering dependence on lithium-based batteries are more and more appealing to meet our current and future needs of energy-demanding applications such as data acquisition, storage, and communication. In this respect, energy harvesting solutions from ambient sources represent a relevant solution by unravelling these challenges and giving access to an unlimited source of portable/renewable energy. Despite more than five decades of intensive study, most of these energy harvesting solutions are exclusively designed from ferroelectric ceramics such as Pb(Zr,Ti)O3 and/or ferroelectric polymers such as polyvinylidene fluoride and its related copolymers, but the large implementation of these piezoelectric materials into these technologies is environmentally problematic, related with elevated toxicity and poor recyclability. In this work, we reveal that fully biobased non-isocyanate polyurethane-based materials could afford a sustainable platform to produce piezoelectric materials of high interest. Interestingly, these non-isocyanate polyurethanes (NIPUs) with ferroelectric properties could be successfully synthesized using a solvent-free reactive extrusion process on the basis of an aminolysis reaction between resorcinol bis-carbonate and different diamine extension agents. Structure-property relationships were established, indicating that the ferroelectric behavior of these NIPUs depends on the nanophase separation inside these materials. These promising results indicate a significant potential for fulfilling the requirements of basic connected sensors equipped with low-power communication technologies., Spanish Ministerio de Economía y Competitividad (MINECO) forfinancial support through projects MAT2017-88788-R and MAT2016-76851-R. This project has received funding from European Union’s Horizon 2020 research and innovation programmeunder the Marie Skłodowska-Curie grant agreement no.955700.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stress-mediated solution deposition method to stabilize ferroelectric BiFe1-xCrxO3 perovskite thin films with narrow bandgaps

  • Jiménez-Zavala, Ricardo|||0000-0002-5333-8529
  • Ricote, J.|||0000-0002-2907-2505
  • Bretos, Iñigo
  • Jiménez Riobóo, Rafael J.|||0000-0002-9545-0172
  • Mompean, Federico J.|||0000-0002-6346-1475
  • Ruiz y Ruiz de Gopegui, Ana
  • Xie, Haibing|||0000-0002-5070-2882
  • Lira-Cantu, Monica|||0000-0002-3393-7436
  • Calzada, M. Lourdes|||0000-0002-2286-653X
Ferroelectric oxides with low bandgaps are mainly based on the BiFeO perovskite upon the partial substitution of iron with different cations. However, the structural stability of many of these perovskites is only possible by their processing at high pressures (HP,.