Pasar al contenido principal

ACEROS FERRITICO-MARTENSITICOS 9-12%CR AVANZADOS POR MEDIO DE LA OPTIMIZACION DE SU PROCESADO TERMOMECANICO

MAT2013-47460-C5-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of Ductile-to-Brittle Transition Behavior in Two Similar Ferritic Oxide Dispersion Strengthened Alloys

  • Chao, Jesús
  • Rementería, Rosalía
  • Aranda, M. M.
  • Capdevila, Carlos
  • González-Carrasco, José Luis
The ductile-to-brittle transition (DBT) behavior of two similar Fe-Cr-Al oxide dispersion strengthened (ODS) stainless steels was analyzed following the Cottrell–Petch model. Both alloys were manufactured by mechanical alloying (MA) but by different forming routes. One was manufactured as hot rolled tube, and the other in the form of hot extruded bar. The two hot forming routes considered do not significantly influence the microstructure, but cause differences in the texture and the distribution of oxide particles. These have little influence on tensile properties; however, the DBT temperature and the upper shelf energy (USE) are significantly affected because of delamination orientation with regard to the notch plane. Whereas in hot rolled material the delaminations are parallel to the rolling surface, in the hot extruded material, they are randomly oriented because the material is transversally isotropic., Financial support of the Spanish Ministerio de Economia e Innovación (MINECO) through a Coordinated Project in the Materials Area of Plan Nacional 2013 (MAT2013-47460-C5-1) is gratefully acknowledged. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Non-Steady State Growth of Pearlite outside the Hultgren Extrapolation

  • Martín-Aranda, María
  • Rementería, Rosalía
  • Hackenberg, Robert E.
  • Urones-Garrote, E.
  • Tsai, Shao Pu
  • Yang, Jer-Ren
  • Capdevila, Carlos
The goal of this paper is to analyse the effect of adding Al on the non-steady pearlite growth occurring in a Fe–C–Mn system. The results are discussed in terms of the partitioning of elements across the austenite/ferrite and austenite/cementite interfaces, and the modification of the pearlite driving force related to the change in carbon activity in austenite., The authors acknowledge Acerinox Company for manufacturing the Fe–C–Mn–Al and the Fe–C–Mn steel. Authors acknowledge financial support to Spanish Ministerio de Economia y Competitividad (MINECO) through in the form of a Coordinate Project (MAT2013-47460-C5-1-P). Authors also acknowledge financial support to Comunidad de Madrid through DIMMAT-CM_S2013/MIT-2775 project. REH acknowledges support from the U.S. Department of Energy (contract DE-AC52-06-NA25396). We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ductility of Nanostructured Bainite

  • Morales-Rivas, Lucía
  • García Mateo, Carlos
  • Sourmail, Thomas
  • Kuntz, Matthias
  • Rementería, Rosalía
  • García Caballero, Francisca
Nanostructured bainite is a novel ultra-high-strength steel-concept under intensive current research, in which the optimization of its mechanical properties can only come from a clear understanding of the parameters that control its ductility. This work reviews first the nature of this composite-like material as a product of heat treatment conditions. Subsequently, the premises of ductility behavior are presented, taking as a reference related microstructures: conventional bainitic steels, and TRIP-aided steels. The ductility of nanostructured bainite is then discussed in terms of work-hardening and fracture mechanisms, leading to an analysis of the three-fold correlation between ductility, mechanically-induced martensitic transformation, and mechanical partitioning between the phases. Results suggest that a highly stable/hard retained austenite, with mechanical properties close to the matrix of bainitic ferrite, is advantageous in order to enhance ductility., The authors gratefully acknowledge the support of the European Research Fund for Coal and Steel, the Spanish Ministry of Economy and Competitiveness and the Fondo Europeo de Desarrollo Regional (FEDER) for partially funding this research under the contracts RFSR-CT-2012-00017, RFSR-CT-2014-00016 and MAT2013-47460-C5-1-P, respectively. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of extensive and limited plastic deformation on recrystallized microstructure of oxide dispersion strengthened Fe-Cr-Al alloy

  • Capdevila, Carlos
  • Rementería, Rosalía
  • Aranda, M. M.
  • Vivas Méndez, Javier
  • Chao, Jesús
  • Amigó, Vicente
Ferritic oxide dispersion-strengthened alloys (ODS) are manufactured using a mechanical alloying process. The development of a coarse-grained microstructure during recrystallization has been detected and discussed by several authors, but the mechanism of grain growth remains uncertain. Recent work has emphasized the large influence of non-uniformities on the development of the recrystallized microstructure. The purpose of the present work is to study the effect of both slight heterogeneous plastic strains and strong directional deformation on recrystallization of a ferritic Fe-base ODS alloy., The authors acknowledge financial support from the Spanish Ministerio de Economia y Competitividad (MINECO) in the form of a Coordinate Project (MAT2016-80875-C3-1-R). The work presented here is done within the Joint Programme on Nuclear Materials of the European Energy Research Alliance Pilot Project CREMAR. The authors would also like to acknowledge financial support from Comunidad de Madrid through DIMMAT-CM_S2013/MIT-2775 project. J. Vivas acknowledges financial support in the form of a FPI Grant BES-2014-069863., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la evolución microestructural de un acero ferrítico ODS de grupo 4 (Y-Al-Ti-Zr) consolidado por consolidación Spark Plasma Sintering (SPS)

  • Macía, Eric
  • Cornide, J.
  • García-Junceda, Andrea
  • Díaz, Luis A.
  • Campos, Mónica
Trabajo presentado al VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, celebrado en Ciudad Real (España) del 7 al 9 de Junio de 2017., [ES]: Los aceros ferríticos ODS son extraordinarios candidatos para su uso en los nuevos reactores nucleares de tipo IV debido a su buen comportamiento a fluencia y bajo irradiación. El uso de elementos de aleaciones como el Ti, Al, Y favorecen la aparición de nanoclusters y nanoprecipitados que limitan el movimiento de dislocaciones, endureciéndolos y mejorando así su comportamiento a fluencia. Con la incorporación del Zr se pretende mejorar la estabilidad térmica de los óxidos precipitados y con ello la temperatura de trabajo. En este caso, el acero ferrítico ODS se ha desarrollado por molienda mecánica de alta energía. Este método proporciona estructuras cristalinas con una gran cantidad de energía almacenada que, al encontrarse heterogéneamente distribuida, produce una recristalización no homogénea durante la etapa de consolidación. La microestructura final obtenida por consiguiente, presenta un tamaño de grano heterogéneo. Con el fin de estudiar este fenómeno, se consolidaron las piezas por SPS haciendo uso de distintas condiciones de consolidación. Se seleccionó una temperatura de sinterización, 1373 K y distintas velocidades de calentamiento (de 100 a 600 °C/min). La estructura obtenida se ha caracterizado mediante difracción de rayos x y microscopía electrónica. Además, con el fin de analizar las propiedades mecánicas del material, se han llevado a cabo ensayos de dureza Vickers y de tracción en probetas subdimensionadas a temperatura ambiente., [EN]: Oxide Dispersion Strengthened (ODS) ferritic Steels are extraordinary candidates for nuclear applications due to their good behavior at high temperature and under irradiation conditions .ODS ferritic steel was produced by mechanical alloying and SPS to obtain a complex nanostructure. A four group elements (Y-Ti-Al-Zr) was selected to improve the stability of the precipitates since they are the main responsible for the thermal stability of fine structure. The heterogeneous distribution of stored energy due to the high energy attrition of MA powder will produce an inhomogeneous recrystallization during the consolidation step. After SPS consolidation a heterogeneous grain size distribution was attained, as recrystallization depends on the plastic deformation degree, on the composition of each particle and on the oxide dispersion promoted. Therefore sintering cycle was performed at 1373 K following fast heating rates (from 100 to 600 °C/min) to minimize porosity. The final microstructures were characterized by XRD and electron microscopy (SEM and TEM). In addition, Vickers microhardness and tensile tests was performed to analyze the mechanical response at R.T., La financiación obtenida por el proyecto MAT2013-47460-C5-S-P ha posibilitado esta investigación., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructural Degradation and Creep Fracture Behavior of Conventionally and Thermomechanically Treated 9% Chromium Heat Resistant Steel

  • Vivas Méndez, Javier
  • Capdevila, Carlos
  • Altstadt, Eberhard
  • Houska, M.
  • Sabirov, IIchat
  • San-Martín, David
The microstructural degradation and the creep fracture behavior of conventionally and thermomechanically treated Grade 91 steel were investigated after performing small punch creep tests. A remarkable reduction in creep ductility was observed for the samples thermomechanically treated in comparison to those conventionally treated under the tested conditions of load (200 N) and temperature (700 °C). A change in the fracture mechanism from a ductile transgranular fracture to a brittle intergranular fracture was observed when changing from the conventionally treated to the thermomechanically treated processing condition, leading to this drop in creep ductility. The change in the fracture mechanism was associated to the localized concentration of creep deformation, close to coarse M23C6 carbides, at the vicinity of prior austenite grain boundaries (PAGB) in the thermomechanically treated samples. The preferential recovery experienced at the vicinity of PAGB produced the loss of the lath structure and the coarsening of the M23C6 precipitates. The electron microscopy images provided suggest that the creep cavities nucleate in these weak recovered areas, associated to the presence of coarse M23C6. After the coalescence of the cavities the propagation of the cracks was facilitated by the large prior austenite grain size produced during the austenitization which favors the propagation of the cracks along grain boundaries triggering the intergranular brittle fracture. This fracture mechanism limits the potential use of the proposed thermomechanical processing routes., Authors acknowledge financial support to Ministerio de Economia y Competitividad (MINECO) through in the form of a Coordinate Project (MAT2016-80875-C3-1-R). Authors also would like to acknowledge financial support to Comunidad de Madrid through DIMMAT-CM_S2013/MIT-2775 project. The authors are grateful for the dilatometer tests by Phase Transformation laboratory. J.Vivas acknowledges financial support in the form of a FPI Grant BES-2014-069863. This work contributes to the Joint Programme on Nuclear Materials (JPNM) of the European Energy Research Alliance (EERA)., Peer Reviewed