Pasar al contenido principal

GRAFENO Y OTRAS ARQUITECTURAS 2D MEDIANTE QUIMICA EN SUPERFICIE: ESPECTRSOCOPIA VIBRACIONAL AVANZADA

MAT2014-54231-C4-4-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Precisely controlled fabrication, manipulation and in-situ analysis of Cu based nanoparticles

  • Martínez, Lidia
  • Lauwaet, K.
  • Santoro, G.
  • Sobrado, J. M.
  • Peláez, R. J.
  • Herrero, V. J.
  • Tanarro, I.
  • Ellis, G. J.
  • Cernicharo, J.
  • Joblin, Christine
  • Huttel, Y.
  • Martín Gago, J. A.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. Martínez, L. [0000-0002-9370-2962] ; Santoro, G. [0000-0003-4751-2209] ; Ellis, G. [0000-0003-4851-6092] ; Joblin, C. [0000-0003-1561-6118], The increasing demand for nanostructured materials is mainly motivated by their key role in a wide variety of technologically relevant fields such as biomedicine, green sustainable energy or catalysis. We have succeeded to scale-up a type of gas aggregation source, called a multiple ion cluster source, for the generation of complex, ultra-pure nanoparticles made of different materials. The high production rates achieved (tens of g/day) for this kind of gas aggregation sources, and the inherent ability to control the structure of the nanoparticles in a controlled environment, make this equipment appealing for industrial purposes, a highly coveted aspect since the introduction of this type of sources. Furthermore, our innovative UHV experimental station also includes in-flight manipulation and processing capabilities by annealing, acceleration, or interaction with background gases along with in-situ characterization of the clusters and nanoparticles fabricated. As an example to demonstrate some of the capabilities of this new equipment, herein we present the fabrication of copper nanoparticles and their processing, including the controlled oxidation (from Cu0 to CuO through Cu2O, and their mixtures) at different stages in the machine., This work was supported by the European Union [grant number ERC-2013-SyG 610256 NANOCOSMOS]; the Spanish MINECO [grant numbers MAT2017-85089-C2-1-R, MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2014-59772-C2-2-P, FIS2016-77578-R, FIS2013-48087-C2-1P, FIS2016-77726-C3-1P and CSIC13-4E-1775]. The authors would also like to thank Miguel Cañas, Javier Pérez and José Flores from the ICMM mechanical workshop for their invaluable help., Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile one-pot exfoliation and integration of 2D layered materials by dispersion in a photocurable polymer precursor

  • Gallardo Ruiz, Alberto
  • Pereyra, R.
  • Martínez-Campos, Enrique
  • García Sánchez, Carolina
  • Acitores, D.
  • Casado-Losada, I.
  • Gómez-Fatou, Marián A.
  • Reinecke, Helmut
  • Ellis, Gary James
  • Acevedo, D.
  • Rodríguez-Hernández, Juan
  • Salavagione, Horacio J.
Efficient exfoliation of graphene and related materials (GRM) and fast and inexpensive integration/assembly are crucial to fulfil their full potential. A high degree of exfoliation in organic media can be achieved with high boiling point liquids that usually leave residues after drying, which is a handicap for many applications. Here, the effective exfoliation and dispersion of GRM in a vinyl monomer, which is subsequently converted to a functional polymer by photopolymerization, is reported. Nanocomposite membranes and three-dimensional objects are produced by the photo-curing process and stereolithography 3D printing, respectively., This work was supported by MINECO (Spain, MAT2013-47898- C2-2-R, MAT2014-54231-C4-4-P, MAT2013-42957-R, MAT2016- 78437-R) and FONCYT (Argentina, PICT-2716-2013, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemistry below graphene: Decoupling epitaxial graphene from metals by potential-controlled electrochemical oxidation

  • Palacio, Irene
  • Otero, Gonzalo
  • Alonso, Concepción
  • Martínez, José I.
  • López-Elvira, Elena
  • Ochando, Isabel M.
  • Salavagione, Horacio J.
  • López, María Francisca
  • García-Hernández, Mar
  • Méndez, J.
  • Ellis, Gary James
  • Martín-Gago, José A.
While high-quality defect-free epitaxial graphene can be efficiently grown on metal substrates, strong interaction with the supporting metal quenches its outstanding properties. Thus, protocols to transfer graphene to insulating substrates are obligatory, and these often severely impair graphene properties by the introduction of structural or chemical defects. Here we describe a simple and easily scalable general methodology to structurally and electronically decouple epitaxial graphene from Pt(111) and Ir(111) metal surfaces. A multi-technique characterization combined with ab-initio calculations was employed to fully explain the different steps involved in the process. It was shown that, after a controlled electrochemical oxidation process, a single-atom thick metal-hydroxide layer intercalates below graphene, decoupling it from the metal substrate. This decoupling process occurs without disrupting the morphology and electronic properties of graphene. The results suggest that suitably optimized electrochemical treatments may provide effective alternatives to current transfer protocols for graphene and other 2D materials on diverse metal surfaces., We acknowledge funding from the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2013- 47898-C2-2-R and MAT2017-85089-C2-1-R), the EU via the ERCSynergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), the innovation program under grant agreement No. 696656 (GrapheneCore1- Graphene-based disruptive technologies), the Comunidad Autónoma de Madrid (CAM) MAD2D-CM Program (S2013/ MIT-3007) and computing resources from CTI-CSIC. GOI acknowledges financial support from FCT, Ministry of Science and Technology, Portugal (Grant No. PTDC/CTM-NAN/121108/2010 and IF/ 01054/2015). EL acknowledges funding from Spanish “Consolider” project CSD2010-00024. JIM acknowledges the financial support by the “Ramón y Cajal” Program of MINECO (Grant RYC-2015-17730) and NANOCOSMOS. We are grateful to Prof. C. Palacio and K. Lauwaet for their help with the XPS measurement., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption and coupling of 4-aminophenol on Pt(111) surfaces

  • Otero, Gonzalo
  • Martínez, José I.
  • Aceituno Bueno, Rebeca
  • Palomares, F. Javier
  • Salavagione, Horacio J.
  • Singh, M. K.
  • Méndez, J.
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
We have deposited 4-aminophenol on Pt(111) surfaces in ultra-high vacuum and studied the strength of its adsorption through a combination of STM, LEED, XPS and ab initio calculations. Although an ordered (2√3 × 2√3)R30° phase appears, we have observed that molecule–substrate interaction dominates the adsorption geometry and properties of the system. At RT the high catalytic activity of Pt induces aminophenol to lose the H atom from the hydroxyl group, and a proportion of the molecules lose the complete hydroxyl group. After annealing above 420 K, all deposited aminophenol molecules have lost the OH moiety and some hydrogen atoms from the amino groups. At this temperature, short single-molecule oligomer chains can be observed. These chains are the product of a new reaction that proceeds via the coupling of radical species that is favored by surface diffusion., We acknowledge funding from the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P and MAT2013-47898-C2-2-R), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), and computing resources from CTI-CSIC. MKS and GOI acknowledge financial support from FCT (Grant No. PTDC/CTM-NAN/121108/2010 and SFRH/BPD/90562/2012), Ministry of Science and Technology, Portugal. HJS would like to acknowledge the MICINN for a "Ramón y Cajal" Senior Research Fellowship, Spain. JIM acknowledges funding from both the CSIC-JAE-Doc Fellowship Program (co-funded by the European Social Fund). The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant agreement No. 604391 Graphene Flagship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of synchrotron infrared micro-reflectance for the study of diverse materials

  • González-Castillo, Eduin I.
  • Shuttleworth, Peter S.
  • Quiles-Díaz, Susana
  • Enrique-Jiménez, Patricia
  • Flores, Araceli
  • Ania, F.
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Yousef, Ibraheem
  • Kreuzer, Martin
  • Ellis, Gary James
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, EIGC acknowledges a PhD grant from the CONACYT (Mexico). SQD and PEJ acknowledge FPI Fellowships, and PSS a Ramón y Cajal PostDoc Fellowship, from the MINECO (Spain). MINECO also provided financial support through Grants MAT2014-54231-C4-4P, MAT2014-59674-JIN, MAT2013-47898-C2-1R and MAT2013-47898-C2-2R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On‐Surface Bottom‐Up Synthesis of Azine Derivatives Displaying Strong Acceptor Behavior

  • Ruiz del Árbol, Nerea
  • Palacio, Irene
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Stetsovych, Oleksander
  • Moro-Lagares, María
  • Mutombo, Pingo
  • Švec, Martin
  • Jelinek, Pavel
  • Cossaro, Albano
  • Floreano, Luca
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
On‐surface synthesis is an emerging approach to obtain, in a single step, precisely defined chemical species that cannot be obtained by other synthetic routes. The control of the electronic structure of organic/metal interfaces is crucial for defining the performance of many optoelectronic devices. A facile on‐surface chemistry route has now been used to synthesize the strong electron‐acceptor organic molecule quinoneazine directly on a Cu(110) surface, via thermally activated covalent coupling of para‐aminophenol precursors. The mechanism is described using a combination of in situ surface characterization techniques and theoretical methods. Owing to a strong surface‐molecule interaction, the quinoneazine molecule accommodates 1.2 electrons at its carbonyl ends, inducing an intramolecular charge redistribution and leading to partial conjugation of the rings, conferring azo‐character at the nitrogen sites., Graphene Flagship Core2‐Graphene‐based disruptive technologies EU Horizon 2020 (785219), ERC‐synergy program (ERC‐2013‐SYG‐610256 Nanocosmos), CTI‐CSIC and Spanish MINECO (grants MAT2017‐85089‐C2‐1‐R, MAT2014‐54231‐C4‐1‐P, and MAT2014‐54231‐C4‐4‐P) are acknowledged. We are grateful to the Czech GACR funding (grant 17‐24210Y) and LM2015087, Czech Academy of Sciences through the Praemium Academiae award and FCT program (IF/01054/2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On-surface azo-coupling reaction of p-aminophenol on Cu(110)

  • Ruiz del Árbol, Nerea
  • Palacio, Irene
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Stetsovych, Oleksander
  • Moro-Lagares, María
  • Mutombo, Pingo
  • Švec, Martin
  • Jelinek, Pavel
  • Floreano, Luca
  • Salavagione, Horacio J.
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
Trabajo presentado en la conferencia Fuerzas y Túnel (FyT2016), celebrada en Girona del 5 al 7 de septiembre de 2016., One of the potential challenges in materials science is the synthesis of novel materials with new and desired properties. On-surface c hemistry is a recent and promising field that provides the basic tools to manage this goal [1], and this approach allows the synthesis of new materials sometimes not accessible with conventional techniques [2]. In this work w e have studied the thermal ly activated chemical reaction of p-aminophenol (p- AP) induced by the Cu(110) surface in UHV environment. A multi-technique study using STM/nc-AFM, LEED, XPS and NEXAFS, as well as DFT calculations was employed to unveil the structural and chemical characteristics of the process and its outcome. This work reveals that by simple thermal activation two p-AP molecules undergo an azo-coupling reaction to form 4,4'-azobis(phenol) (ABP). These molecules arrange in a flat geometry on the Cu surface forming highly organized molecular rows that are aligned out of the main crystallographic Cu(110) surface directions (Fig 1). XPS N1s spectra reveal an oxidation reaction from amine to imine while XPS O1s data suggests that oxygen atoms could be covalently bound to the substrate. In summary, we have obtained a novel aromatic azo-compound by an on-surface thermally activated process, which evidences the enormous potential of this advanced strategy. The multi-technique study allows us to propose a model for this reaction., We thank Spanish MINECO (Grants MAT2014-54231-C4-1-P and MAT2014-54231-C4-4-P)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Precisely controlled fabrication, manipulation and in-situ analysis of Cu based nanoparticles

  • Martínez Orellana, Lidia
  • Lauwaet, Koen
  • Santoro, Gonzalo
  • Sobrado, Jesús Manuel
  • Peláez, Ramón J.
  • Herrero, Víctor J.
  • Tanarro, Isabel
  • Ellis, Gary James
  • Cernicharo, José
  • Joblin, C.
  • Huttel, Yves
  • Martín-Gago, José A.
13 pags., 8 figs. -- Open Access funded by Creative Commons Atribution Licence 4.0, The increasing demand for nanostructured materials is mainly motivated by their key role in a wide variety of technologically relevant fields such as biomedicine, green sustainable energy or catalysis. We have succeeded to scale-up a type of gas aggregation source, called a multiple ion cluster source, for the generation of complex, ultra-pure nanoparticles made of different materials. The high production rates achieved (tens of g/day) for this kind of gas aggregation sources, and the inherent ability to control the structure of the nanoparticles in a controlled environment, make this equipment appealing for industrial purposes, a highly coveted aspect since the introduction of this type of sources. Furthermore, our innovative UHV experimental station also includes in-flight manipulation and processing capabilities by annealing, acceleration, or interaction with background gases along with in-situ characterization of the clusters and nanoparticles fabricated. As an example to demonstrate some of the capabilities of this new equipment, herein we present the fabrication of copper nanoparticles and their processing, including the controlled oxidation (from Cu to CuO through CuO, and their mixtures) at different stages in the machine., This work was supported by the European Union [grant number ERC-2013-SyG 610256 NANOCOSMOS]; the Spanish MINECO [grant numbers MAT2017-85089-C2-1-R, MAT2014-54231-C4-1-P, MAT2014-54231- C4-4-P, MAT2014-59772-C2-2-P, FIS2016-77578-R, FIS2013-48087-C2-1P, FIS2016-77726-C3-1P and CSIC13-4E-1775]., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces

  • Aceituno Bueno, Rebeca
  • Marciello, Marzia
  • Moreno, Miguel
  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Martínez Orellana, Lidia
  • Prats Alfonso, Elisabet
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Villa, Rosa
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Huttel, Yves
  • Morales, María Del Puerto
  • Briones, Carlos
  • López, María Francisca
  • Ellis, Gary James
  • Vázquez Burgos, Luis
  • Martín-Gago, José A.
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S–metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed., This work was supported by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 696656 (Graphene Flagship-core 1) and no 785219 (Graphene Flagship −core 2); UE FP7 ideas: ERC (grant ERC-2013-SYG-610256 Nanocosmos) and Spanish MINECO grants MAT2014-54231-C4-1-P, MAT2014-54231-C4-4-P, MAT2017-85089-C2-1-R, MAT2014-59772-C2-2-P, and BIO2016-79618-R (funded by EU under the FEDER programme), as well as the Nanoavansens program from the Community of Madrid (S2013/MIT-3029). This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MINECO and also the ICTS NANBIOSIS, more specifically the Micro-Nano Technology Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN) at the IMB-CNM. We are grateful to Matthias Muntwiler for his assistance with experiments in the PEARL beamline in the SLS facility. Finally, we acknowledge the TEM and ICP services at the CNB and ICMM institutes, respectively. CSS acknowledges the MINECO for a Juan de la Cierva Incorporación grant (IJCI-2014-19291). M. Marciello is grateful to the Comunidad de Madrid (CM) and European Social Fund (ESF) for supporting her research work through the I+D Collaborative Programme in Biomedicine NIETO-CM (B2017-BMD3731)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Versatile Graphene-Based Platform for Robust Nanobiohybrid Interfaces

  • Bueno, Rebeca
  • Marciello, Marzia
  • Moreno, Miguel
  • Sánchez Sánchez, Carlos|||0000-0001-8644-3766
  • Martínez, José I.
  • Martínez, Lidia
  • Prats Alfonso, Elisabet|||0000-0002-7320-1896
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Villa, Rosa|||0000-0003-2735-3204
  • Mompean, Federico
  • Garcia-Hernandez, Mar|||0000-0002-5987-0647
  • Huttel, Yves
  • Morales, María del Puerto|||0000-0002-7290-7029
  • Briones Llorente, Carlos|||0000-0003-2213-8353
  • López, María F.
  • Ellis, Gary J.
  • Vázquez, Luis
  • Martin-Gago, Jose Angel|||0000-0003-2663-491X
Technologically useful and robust graphene-based interfaces for devices require the introduction of highly selective, stable, and covalently bonded functionalities on the graphene surface, whilst essentially retaining the electronic properties of the pristine layer. This work demonstrates that highly controlled, ultrahigh vacuum covalent chemical functionalization of graphene sheets with a thiol-terminated molecule provides a robust and tunable platform for the development of hybrid nanostructures in different environments. We employ this facile strategy to covalently couple two representative systems of broad interest: metal nanoparticles, via S-metal bonds, and thiol-modified DNA aptamers, via disulfide bridges. Both systems, which have been characterized by a multitechnique approach, remain firmly anchored to the graphene surface even after several washing cycles. Atomic force microscopy images demonstrate that the conjugated aptamer retains the functionality required to recognize a target protein. This methodology opens a new route to the integration of high-quality graphene layers into diverse technological platforms, including plasmonics, optoelectronics, or biosensing. With respect to the latter, the viability of a thiol-functionalized chemical vapor deposition graphene-based solution-gated field-effect transistor array was assessed.