Pasar al contenido principal

ELECTROLITOS DE LIQUIDOS IONICOS Y ELECTRODOS BASADOS EN COLOIDES POROSOS COMO COMBINACIONES AVANZADAS PARA BATERIAS SEGURAS CON AMPLIO RANGO DE TEMPERATURA DE TRABAJO

MAT2014-54994-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the catalytic activity of sulfate-derived pristine and post-treated porous TiO2(101) anatase mesocrystals by the oxidative desulfurization of dibenzothiophenes

  • Rivoira, Lorena P.
  • Martínez, Maria L.
  • Falcon, Horacio
  • Beltramonte, Andrea R.
  • Campos Martín, José Miguel
  • García Fierro, José Luis
  • Tartaj, Pedro
Mesocrystals (basically nanostructures showing alignment of nanocrystals well beyond crystal size) are attracting considerable attention for modeling and optimization of functionalities. However, for surface-driven applications (heterogeneous catalysis), only those mesocrystals with excellent textural properties are expected to fulfill their potential. This is especially true for oxidative desulfuration of dibenzothiophenes (hard to desulfurize organosulfur compounds found in fossil fuels). Here, we probe the catalytic activity of anatases for the oxidative desulfuration of dibenzothiophenes under atmospheric pressure and mild temperatures. Specifically, for this study, we have taken advantage of the high stability of the (101) anatase surface to obtain a variety of uniform colloidal mesocrystals (approximately 50 nm) with adequate orientational order and good textural properties (pores around 3-4 nm and surface areas around 200 m2/g). Ultimately, this stability has allowed us to compare the catalytic activity of anatases that expose a high number of aligned single crystal-like surfaces while differing in controllable surface characteristics. Thus, we have established that the type of tetrahedral coordination observed in these anatase mesocrystals is not essential for oxidative desulfuration and that both elimination of sulfates and good textural properties significantly improve the catalytic activity. Furthermore, the most active mesocrystals have been used to model the catalytic reaction in three-(oil-solvent-catalyst) and two-phase (solvent-catalyst) systems. Thus, we have been able to observe that the transfer of DBT from the oil to the solvent phase partially limits the oxidative process and to estimate an apparent activation energy for the oxidative desulfuration reaction of approximately 40 kJ/mol in the two-phase system to avoid mass transfer limitations. Our results clearly establish that (101) anatase mesocrystals with excellent textural properties show adequate stability to withstand several post-treatments without losing their initial mesocrystalline character and therefore could serve as models for catalytic processes different from the one studied here., M.L.M., H.F., and A.R.B. are researchers from CONICET. The authors thank CONICET Argentina, PIP CONICET 11220120100218CO, 2014−2017. P.T. acknowledges the financial support from MINECO Spain under contract MAT2014-54994-R., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward a better understanding and optimization of the electrochemical activity of Na-Ion TiO2 anatase anodes using uniform nanostructures and ionic liquid electrolytes

  • Vazquez-Santos, Maria B.
  • Morales, Enrique
  • Tartaj, Pedro
  • Amarilla, José Manuel
TiO anatase has emerged as a promising anode for Na-ion batteries (SIBs). However, widespread use of this anode is severely limited by a series of factors that need to be identified and understood to further improve their electrochemical response. Here, we have taken benefit from the versatility of a self-assembly seeding-assisted method to obtain a variety of uniform high-surface-area undoped TiO anatase nanostructures. Electrodes built from these uniform nanostructures in combination with a safe ionic liquid electrolyte have allowed a systematic study on some of the factors that determine the electrochemical activity of Na-ion anatase anodes. Interestingly, the inherent low penetrability of the ionic liquid electrolyte has resulted in an unexpected asset to clarify large differences in Na uptake by different nanostructures. Basically, solid electrolyte interface (SEI) effects were maximized and therefore clearly separated from electrochemical reactions strictly associated with the anatase anode. Thus, for electrodes built from nanostructures that preserved their initial conformation after cycling, the first discharge showed Na uptakes well-beyond those of the Ti/Ti redox couple. This large uptake has been associated with an apparent reversible reaction that operates below ca. 0.5-0.7 V and an irreversible mechanism that operates at lower voltages (ca. 0.3 V). However, for electrodes built from nanostructures that favored SEI formation, the irreversible reaction associated with the plateau at ca. 0.3 V was not observed during the first discharge. In accordance, the total Na uptake did not reach values beyond those of the corresponding Ti/Ti redox couple. Irreversibility, in this case, is associated with SEI formation. Our results also establish the strong effect that size at different scale levels has in the electrochemical response of anatase anodes for SIBs (changes from ca. 6 to 11 nm in crystal sizes and from 50 to 80 in nanostructure sizes led to pronounced differences). This result emphasizes that any conclusions on mechanistic studies other than size effects must be done under strict control on size at various scales (size as a strict control variable at crystal level and nanostructure or in more general terms aggregate scale levels). Finally, we have found that at 30 and 60 °C the performance of the best of the electrodes, with the low-flammable and low-volatile ionic liquid electrolyte, is comparable to that of similar nanostructures immersed in their Li-ion electrolyte counterparts. This result is promising, as in stationary applications where SIBs could replace Li-ion batteries, large accumulation of storage components imposes more strict safety criteria. Basically, power criteria can be relaxed in response to more strict safety criteria., Financial support from MINECO (SPAIN) under Project MAT2014-54994-R is acknowledged., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Asymmetrical imidazolium-trialkylammonium room temperature dicationic ionic liquid electrolytes for Li-ion batteries

  • Vélez, J. F.
  • Vazquez-Santos, Maria B.
  • Amarilla, José Manuel
  • Tartaj, Pedro
  • Herradón García, Bernardo
  • Mann, Enrique
  • Río, Carmen del
  • Morales, Enrique
This paper reports on the synthesis and characterization of novel dicationic ionic liquid electrolytes based on asymmetrical imidazolium-trialkylammonium ionic liquids. The results obtained indicate that the length of the alkyl chain attached to the nitrogen atom has a significant influence on the thermal and electrochemical properties of the electrolytes, as well as on parameters such as lithium ion coordination number and lithium ion transport number. All synthesized dicationic ionic liquids and the corresponding electrolytes are liquid at room temperature being thermally stable up to 300 °C; well above battery operation temperature. Room temperature ionic conductivities of the electrolytes are in the range of 0.8–7.2 × 10 S cm, with an electrochemical stability window of 1.5 V–5.0 V vs. Li/Li. Synthesized electrolytes have been tested in Li half-cells using LiMnO (LMO) spinel as cathode material. Cyclic voltammetry, rate capability and galvanostatic cycling studies at 60 °C have been performed. Again, the alkyl chain length attached to the nitrogen atom plays a significantly role in the electrochemical performance of the LMO cells. Among the cells studied, the one assembled with the electrolyte 1M LITFSI doped IMI-TEA exhibits the best rate capability and the high cycling performance., Financial support from Ministerio de Economia y Competitividad (MAT2014-54994-R) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2 Nanostructures as Anode Materials for Li/Na-Ion Batteries

  • Vazquez-Santos, Maria B.
  • Tartaj, Pedro
  • Morales, Enrique
  • Amarilla, José Manuel
Here we summarize some results on the use of TiO nanostructures as anode materials for more efficient Li-ion (LIBs) and Na-ion (NIBs) batteries. LIBs are the leader to power portable electronic devices, and represent in the short-term the most adequate technology to power electrical vehicles, while NIBs hold promise for large storage of energy generated from renewable sources. Specifically, TiO an abundant, low cost, chemically stable and environmentally safe oxide represents in LIBs an alternative to graphite for applications in which safety is mandatory. For NIBs, TiO anodes (or more precisely negative electrodes) work at low voltage, assuring acceptable energy density values. Finally, assembling different TiO polymorphs in the form of nanostructures decreases diffusion distances, increases the number of contacts and offering additional sites for Na storage, helping to improve power efficiency. More specifically, in this contribution we highlighted our work on TiO anatase mesocrystals of colloidal size. These sophisticate materials; showing excellent textural properties, have remarkable electrochemical performance as anodes for Li/Na-ion batteries, with conventional alkyl carbonates electrolytes and safe electrolytes based on ionic liquids., Financial support through the projects MAT2014-54994-R (MINECO) and PIE-201460E123 (CSIC) are gratefully recognized, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surfactant-Free Vanadium Oxides from Reverse Micelles and Organic Oxidants: Solution Processable Nanoribbons with Potential Applicability as Battery Insertion Electrodes Assembled in Different Configurations

  • Tartaj, Pedro
  • Amarilla, José Manuel
  • Vázquez Santos, Beatriz
Vanadium oxides similar to other metal transition oxides are prototypes of multifunctionality. Implementing new synthesis routes that lead to dry vanadium oxide nanomaterials with good functional and structural properties as well as good processing capabilities is thus of general interest. Here we report a facile method based on reverse micelles for the growth at room temperature and atmospheric pressure of surfactant-free vanadium oxide nanoribbons that retain after drying excellent solution-processable capabilities. Essential for the success of the method is the use of a soluble organic oxidant that acts as oxidant and cosurfactant during the synthesis, and facilitates surfactant removal with a simple washing protocol. Interestingly, this simple surfactant removal protocol could be of general applicability. As a proof-of-concept of the functional, structural, and processing capabilities of the dry vanadium oxide nanoribbons here prepared, we have checked their lithium insertion capabilities as battery cathodes built upon different configurations. Specifically, we show efficient insertion both in dry nanoribbons processed as films using doctor blade and organic solvents and in dry nanoribbons infiltrated in three-dimensional metal collectors from aqueous suspensions., Financial support from Ministerio de Economia y Competitividad (SPAIN) under Projects MAT2014-54994-R and PIE-201460E123 is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The design and study of new Li-ion full cells of LiCo2/3Ni1/6Mn1/6O2 positive electrode paired with MnSn2 and Li4Ti5O12 negative electrodes

  • Mahmoud, Abdelfattah
  • Saadoune, Ismael
  • Lippens, Pierre-Emmanuel
  • Chamas, Mohamad
  • Hakkou, Rachid
  • Amarilla, José Manuel
We report evidence for the electrochemical performances of two Li-ion full cells, built up by the combination of LiCoNiMnO cathode material with MnSn intermetallic and LiTiO spinel as the anode materials, respectively. MnSn and LiTiO electrode materials illustrate different working voltage versus the redox couple Li/Li and different reaction mechanisms during lithium insertion/deinsertion cycles. The structure, morphological characteristics and the electrochemical properties of the studied materials were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical techniques. The two full-cell configurations showed different electrochemical behaviors. The MnSn//LiCoNiMnO configuration exhibits high working voltage (~ 3.5 V) and specific capacity (~ 200 mAh/g) but suffers from high irreversible capacity loss during the first cycles and capacity fading during cycling. The LiTiO//LiCoNiMnO cell demonstrated excellent cycling properties at different C-rates with 100% capacity retention after 150 cycles at 1 C. Although the working voltage (~ 2.2 V) and the specific capacity (~ 140 mAh/g) are lower than those of the MnSn//LiCoNiMnO configuration, the other measured electrochemical properties suggest that the LiTiO//LiCoNiMnO full cell is a potential candidate for battery application due to its excellent cycling performance and improved safety., The authors would like to acknowledge the support from the Agence Universitaire de la Francophonie (AUF, France) and, the Ministerio de Economia y Competitividad (Spain) under the project MAT2014-54994-R. A. Mahmoud is grateful to the Walloon region for a Beware Fellowship Academia 2015-1, RESIBAT no 1510399, and to the Agencia Española de Cooperación Internacional para el Desarrollo (AECID, Spain) for the MAEC-AECI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geminal pyrrolidinium and piperidinium dicationic ionic liquid electrolytes. Synthesis, characterization and cell performance in LiMn2O4 rechargeable lithium cells

  • Vélez, J. F.
  • Vazquez-Santos, Maria B.
  • Amarilla, José Manuel
  • Herradón García, Bernardo
  • Mann, Enrique
  • Río, Carmen del
  • Morales, Enrique
Dicationic ionic liquids are promising solvents for safe high performance Li-ion battery applications. In this work, we report on the synthesis and characterization of new electrolytes based on geminal dicationic pyrrolidinium and piperidinium bis(trifluoromethane)sulfonimide ionic liquids, where the two cations are linked by variable length oxyethylene chain spacers. All 1 M LiTFSI doped synthesized electrolytes are thermally stable up to 300 °C, and they exhibited remarkable electrochemical stability window up to 6.0 V vs. Li/Li. Electrolytes were assembled with LiMnO (LMO) spinel in lithium half-cells. Electrochemical cell performance in terms of cyclic voltammetry, rate capability and galvanostatic cycling studies have been studied at 60 °C. Results obtained indicate that both the cationic structure and the length of the oxyethylene chain spacer has a significant influence on the electrochemical performance of LMO-cells. The cell based on the pyrrolidinium electrolyte with the two cationic structures linked by two oxyethylene units exhibit the faster rate capability, with a capacity retention of 45% at 5C, and the highest reversible capacity (ca. 80 mAhg)., The authors wish to thank the Spanish Ministerio de Ciencia, Innovación y Universidades within the projects “Ionic liquid electrolytes and electrodes based on porous colloid as advanced combinations to safe and wide temperature operating batteries”, Ref: MAT2014-54994-R and “Environmentally-guided electricity storage devices: from materials to the Na-ion battery prototypes”, Ref: RTI2018-095425-B-I00”, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Geminal Pyrrolidinium and Piperidinium Dicationic Ionic Liquid Electrolytes. Synthesis, Characterization and Cell Performance in LiMn2O4 Rechargeable Lithium Batteries

  • Herradón García, Bernardo
  • Mann, Enrique
  • Morales, Enrique
  • Río, Carmen del
  • Vélez, J. F.
  • Vazquez-Santos, Maria B.
  • Amarilla, José Manuel
Rechargeable lithium-ion batteries are excellent candidates for the next generation power sources because of their high gravimetric and volumetric energy compared to other cell chemistries. Conventional LIB¿s, based on organic carbonate liquid electrolytes, suffer from potential thermal and chemical threats associated with the thermal runaway hazard, low thermal stability, low flash points, toxicity, high volatility and flammability. Aprotic ionic liquids, represent a safe alternative to organic carbonates, due to their negligible vapor pressure, wide liquid range, high thermal stability, non-flammability, high ionic conductivity and wide electrochemical stability window. However, problems associated to their high viscosity, especially when lithium salts have been added, low stability of the solid electrolyte interphase (SEI), and high cost need to be solved. In this work, we report on the synthesis and characterization of a series of novel room temperature dicationic ionic liquid electrolytes, based on pyrrolidinium and piperidinium cation moieties linked by short oligo(ethylene glycol) chains. Electrochemical performance of Li-half cells assembled using LiMn2O4 spinel (LMO) as cathode material and 1M LiTFSI doped dicationic ionic liquid electrolytes have been tested., Financial support from Ministerio de Economia y Competitividad (ILCOBATT Project, Ref: MAT2014-54994-R) is gratefully acknowledged