Pasar al contenido principal

DISPOSITIVOS DE ALMACENAMIENTO ELECTRICO GUIADOS POR ASPECTOS MEDIOAMBIENTAL: DE LOS MATERIALES A PROTOTIPOS DE BATERIAS DE ION-SODIO

RTI2018-095425-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geminal pyrrolidinium and piperidinium dicationic ionic liquid electrolytes. Synthesis, characterization and cell performance in LiMn2O4 rechargeable lithium cells

  • Vélez, J. F.
  • Vazquez-Santos, Maria B.
  • Amarilla, José Manuel
  • Herradón García, Bernardo
  • Mann, Enrique
  • Río, Carmen del
  • Morales, Enrique
Dicationic ionic liquids are promising solvents for safe high performance Li-ion battery applications. In this work, we report on the synthesis and characterization of new electrolytes based on geminal dicationic pyrrolidinium and piperidinium bis(trifluoromethane)sulfonimide ionic liquids, where the two cations are linked by variable length oxyethylene chain spacers. All 1 M LiTFSI doped synthesized electrolytes are thermally stable up to 300 °C, and they exhibited remarkable electrochemical stability window up to 6.0 V vs. Li/Li. Electrolytes were assembled with LiMnO (LMO) spinel in lithium half-cells. Electrochemical cell performance in terms of cyclic voltammetry, rate capability and galvanostatic cycling studies have been studied at 60 °C. Results obtained indicate that both the cationic structure and the length of the oxyethylene chain spacer has a significant influence on the electrochemical performance of LMO-cells. The cell based on the pyrrolidinium electrolyte with the two cationic structures linked by two oxyethylene units exhibit the faster rate capability, with a capacity retention of 45% at 5C, and the highest reversible capacity (ca. 80 mAhg)., The authors wish to thank the Spanish Ministerio de Ciencia, Innovación y Universidades within the projects “Ionic liquid electrolytes and electrodes based on porous colloid as advanced combinations to safe and wide temperature operating batteries”, Ref: MAT2014-54994-R and “Environmentally-guided electricity storage devices: from materials to the Na-ion battery prototypes”, Ref: RTI2018-095425-B-I00”, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Electrochemical performance of Na0.67Mn0.67Ni0.23Mg0.1O2 sodium half-cells. Effect of electrolyte and operation voltage

  • Santamaria, C.
  • Amarilla, José Manuel
  • Herradón García, Bernardo
  • Río, Carmen del
  • Morales, Enrique
Layered manganese oxides are one of the most promising cathode materials for SIBs1,2. In this work P2 Na0.67Mn0.67Ni0.33O2 (MN) and magnesium substituted P2-Na0.67Mn0.67Ni0.23Mg0.1O2 (Mg.MN) have been synthesized by solid-state reaction. Cycling performances of both cathodes in sodium-ion half-cells using the two oxides and 1M NaPF6 in PC electrolyte over different voltage ranges were compared. Results obtained show an improvement on cyclability by partial substitution of nickel by magnesium. The electrochemical performance of Mg MN//Na cells with 1M NaPF6 in PC and an ionic liquid based electrolyte, 1M NaFSI in Pyr14TFSI, was thoroughly studied in three voltage ranges (2.0V-4.0V, 2.0V-4.5V and 1.5V 4.0V). Results from galvanostatic studies showed that parameters as the rate capability and the cyclability depend strongly on both the electrolyte and the operation voltage used. Additionally, flammability test of the two electrolytes were performed and a large improvement in safety was observed for the ionic liquid electrolyte compared to the organic carbonate one. The discharge capacity, the average working voltage and the cyclability were superior for the Mg-MN half-cells assembled with the non-flammable 1M NaFSI in Pyr14TFSI ionic liquid-based electrolyte, suggesting that sodium cells based on this IL-electrolyte coupled with Mg substituted layered manganese oxide cathode are very appealing for safe high energy Na-ion batteries.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sodium-salt/amide based deep eutectic electrolytes for sodium ion batteries

  • Santamaria, C.
  • Amarilla, José Manuel
  • Morales, Ernesto
  • Río, Carmen del
  • Herradón García, Bernardo
Deep eutectic solvents (DESs) have been spotlighted as potential alternative electrolytes capable of solving the problems imposed by ionic liquids1, which are mainly, the cost and low ionic conductivity when compared to conventional organic electrolytes. The ability to manipulate the melting point and electrochemical stability is important as these features determine performance2. In this study, we report on a family of Na-salt/amide-based electrolytes (DEEs) comprised of two amide derivatives (N, N¿-dimethylpropyleneurea and 2-imidazolidinone) and two representative Na-salts (NaFSI and NaTFSI), in terms of thermal and electrochemical properties. We aim to develop a new family of DEEs based on sodium-salt/amide mixtures, which exhibit remarkable eutectic effects, good ionic conductivity and a wide electrochemical stability window. Another objective of this work is to provide guidelines for designing DEEs for NIB with characteristics that can be altered by selecting a suitable sodium salt- amide derivative pair.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sodium salt/tetramethylurea deep eutectic electrolytes: Characterization and cell performance in rechargeable sodium-ion cells

  • Santamaria, C.
  • Amarilla, J. M.
  • Morales, Ernesto
  • Río, Carmen del
  • Herradón García, Bernardo
Electrolytes have a large impact in determining the battery performance in terms of reversible capacity, lifetime, rate capability and safety. Conventional liquid electrolytes for sodium-ion batteries (SIBs) consist on sodium salts dissolved in an organic solvent or a mixture of them, owing to their stable electrochemical performance, high ionic conductivity, wide operation voltage window and good compatibility with various electrode materials. Among organic solvents, carbonates, esters and ethers are extensively used, but the high flammability of these components imposes severe safety hazards. Deep eutectic solvents (DESs) are an emerging class of tunable solvents with potential applications in electrochemical energy storage systems. These solvents exhibit favourable properties including high solvent strength, low-cost, ease of preparation, low-toxicity, wide electrochemical windows, little to no volatility, and lack of flammability; on the other side, high viscosity and low conductivity has thus far limited their practical application. Recently, a new class of DESs, denominated deep eutectic electrolytes (DEEs), constituted by a mixture of a hydrogen bond donor (HBD) organic solvent (urea, tetramethylurea, acetamide, etc.) 1 and a metal salt have been proposed. DEEs are capable to reduce the safety risks, as the HBD organic solvent exhibit inherent flame retardant and low volatility and a significantly lower melting point than those of the original compounds, associated to the intermolecular hydrogen bonds between components. In this study, DEEs based on two sodium salts (NaTFSI and NaFSI) and tetramethylurea were formulated, their physicochemical properties characterized and their potential application as electrolytes in sodium-ion magnesium-doped manganese oxide half-cells was evaluated.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grafeno y COVID-19: aspectos científicos y sociales

  • Herradón García, Bernardo
Dedicado a todas las personas afectadas por la COVID-19 y a las que están en primera línea protegiéndonos y curándonos., La humanidad está sufriendo la mayor crisis de los últimos 80 años. La rápida expansión de la COVID19 ha provocado más de 27 millones de afectados y casi 900.000 fallecidos (datos del 9 de septiembre de 2019). Todos los países se han visto afectados y la enfermedad está teniendo connotaciones sociales, laborales y económicas extremadamente negativas. La COVID-19 también se está estudiando desde el punto de vista científico, con muchos grupos de investigación trabajando en aspectos diversos como son el estudio del virus, su origen, el mecanismo de infección y las posibles soluciones profilácticas y terapéuticas (vacunas y moléculas pequeñas). Todas las áreas científicas están implicadas en la lucha contra la COVID-19. En este artículo se resumen algunos de los avances científicos en el desarrollo de fármacos contra la COVID-19 y el papel que la ciencia de los materiales, en general, y el grafeno, en particular, tienen en este contexto. También se discute el impacto que estos avances tienen en la sociedad a través de los medios de comunicación y algunos políticos., Se agradece la financiación del Ministerio de Ciencia e Innovación (proyecto RTI2018-095425-B-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

BATERÍAS DE ION SODIO: ALGUNOS RESULTADOS CIENTÍFICOS E IMPACTO EN LA SOCIEDAD.

  • Santamaria, Cristina
  • Herradón García, Bernardo
  • Morales, Enrique
  • Amarilla, José Manuel
Nuestro mundo moderno depende de la energía en diferentes aspectos: generación, almacenamiento y distribución. Para que la sociedad más cómoda y sostenible, tenemos que encontrar fuentes y vectores de energía adecuados y formas convenientes de almacenarla. Dado que nuestro futuro está seriamente amenazado por el uso de hidrocarburos y carbono como fuentes primarias de energía, tenemos que encontrar fuentes alternativas y renovables y medios de almacenamiento adecuados. Actualmente, la estrategia más plausible es utilizar la energía solar para transformarla en electricidad. Un inconveniente potencial en este proceso es que la electricidad no es fácil de almacenar en grandes cantidades capaces de proporcionar energía a una ciudad, por ejemplo. Por lo tanto, existe una necesidad urgente de lograr este objetivo. Las baterías recargables de iones de litio (LIB) son herramientas poderosas para resolver este problema. Sin embargo, surgen problemas al considerar la baja abundancia de litio y su localización en zonas conflictivas del planeta [1]. Dado que el sodio es el sexto elemento más abundante en la corteza terrestre y está uniformemente distribuido por todo el mundo, las baterías recargables de sodio han surgido como una alternativa prometedora a las LB clásicas en aplicaciones estacionarias al aire libre, donde el precio es el factor crucial [2]. Actualmente nuestra investigación se centra en el desarrollo de nuevos materiales de electrodo y electrolitos. En este trabajo, nos enfocamos en electrolitos líquidos no inflamables, basados en disolventes orgánicos alternativos como líquidos iónicos y eutécticos. También proponemos el uso de electrolitos sólidos poliméricos tipo gel que ofrecen varias ventajas sobre los líquidos, como buena conductividad iónica, inmunidad a fugas, amplia ventana de estabilidad electroquímica, alta capacidad específica y ciclo de vida largo [3]. En esta comunicación hacemos un repaso sobre el estado del arte de las baterías de iones de sodio junto con una reflexión sobre cómo esta tecnología va a cambiar nuestra sociedad. Además, discutiremos sobre la síntesis y caracterización de futuros electrolitos de iones de sodio., Se agradece el apoyo financiero del Ministerio de Ciencia, Innovación y Universidades (Proyecto Ref: RTI2018- 095425-B-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards More Sustainable Schiff Base Carboxylate Anodes for Sodium-Ion Batteries

  • Gómez-Berenguer, Irene
  • Herradón García, Bernardo
  • Amarilla, José Manuel
  • Castillo Martínez, E.
Bismine sodium salt (BSNa), a Schiff base with two sodium carboxylates, has shown promising electrochemical performance as an anode material. However, its synthesis involves toxic reagents and generates impurities, requiring significant solvent use for purification. This study introduces a novel synthetic method using sodium hydroxide as the sole reagent, which acts as both a base and Na source in the ion exchange step. With this procedure, we reduce the amounts of chemicals, diminish toxicity, improve the purity of the target compound, and use less solvent while maintaining comparable electrochemical performance. Additionally, the procedure is carried out under anhydrous conditions that avoid the undesirable hydrolysis of the imine linkages. In a previous report, the processing of the composite electrode was not established. In this article, we address this issue; the electrochemical performance, specifically the rate capability, is enhanced by processing the electrodes in laminate form rather than powder. As alternative to N-methyl-2- pyrrolidone (NMP), a common but disadvantageous solvent in laminate processing, other solvents were explored by testing acetone (DMK), methylisopropylketone (MIPK), and a DMK-NMP mixture. The remarkable electrochemical performance (specific capacity of 260–280 mAh/g, and capacity retentions higher than 84% at 1C (260 mA/g) remained consistent across these solvents. Furthermore, we investigated replacing copper with aluminum as the current collector to reduce costs and increase the energy density of the battery. While aluminum performed comparably to copper at low specific currents C/10 (26 mA/g), it showed a significant shift in the redox process potentials at higher specific currents, Grants PID2021-127864OB-I00 and RTI2018-095425-B-I00 were funded by MCIN/AEI/10.13039/501100011033 and by ͞ERDF, A way of making Europe. The predoctoral research personnel training grant PIPF-2023/ECO-30681 (IGB) was funded by the Community of Madrid., Peer reviewed