Pasar al contenido principal

BATERIAS AVANZADAS Y SOSTENIBLES DE ION SODIO E ION POTASIO DE ESTADO SOLIDO

PID2021-127864OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Hybrid carboxylate-Schiff-bases as electroactive anode materials for potassium-ion batteries

  • Castillo Martínez, Elisabet
  • Solana Madruga, Elena
  • Ebrahimi Koodehi, Sohaila
  • Leskes, Michal
  • del Burgo Olivares, Carlos
  • Linage, Martín
  • Martín Gandul, María Del Carmen
  • Sánchez Ahijon, Elena
  • Sánchez Ahijón, Elena
  • Cascos, Vanessa
  • Cascos Jiménez, Vanessa Amelia
  • Avila Brande
  • Ávila Brande, David
Three new crystalline potassium salts of hybrid carboxylate/Schiff-base oligomers are reported as electrochemically active anode materials for potassium ion batteries. One of them is constituted by the phenyl “dimer” KOOC-ϕ-C=N-ϕ-COOK (BSK-1) and the other two by the isomer “trimers” KOOC-ϕ-C=N-ϕ-N=C-ϕ-COOK (BSK-2 A) and KOOC-ϕ-N=C-ϕ-C=N-ϕ-COOK (BSK-2B). A structural model refined from powder X-ray diffraction data is discussed for the short (dimeric) salt. A pseudo-monoclinic unit cell, with space group P and lattice parameters a = 15.88(1) Å, b = 5.772(2) Å, c = 3.887(1) Å and β = 98.8(1)0, contains a single molecule. Crystal packing of the aromatic molecules can be described by a slipped π-stacking along the c-axis. All three oligomers are electrochemically active at voltages low enough to be used as anode in potassium ion batteries, at average voltages of 1.2 V vs K+/K for the dimer and 1.05 V vs K+/K for the trimers. Combined with 3.9 M KFSI in DME electrolyte, they show reversible capacities of 115 mAh/g (dimer), 233 mAh/g (BSK-2 A) and 104 mAh/g (BSK-2B) at C/10, with capacity retentions at 1C of 74% and 65% for the dimer and the trimers respectively. Based on the dQ/dV plots, the trimers react through two solid solution mechanisms, forming a stable radical intermediate, whereas the dimer changes from a single solid solution to a solid-solution+biphasic reaction. Future in-situ x-ray diffraction studies based on the solved crystal packing should enable to confirm these mechanisms.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrolytes from Alkoxyalkyl-substituted Imidazolium ionic liquids. Synthesis, characterization, properties and cell performance in LiFePO4 half-cells<

  • Santamaría, Cristina
  • Morales, Enrique
  • Amarilla, J. Manuel
  • Herradón García, Bernardo
Electrolytes based on lithium bis(trifluoromethane)sulfonimide (LiTFSI) salt and alkoxyalkyl-substituted imidazolium ionic liquids (ILs) have been studied. We have synthesized three different 1-alkoxyalkyl-3-methylimidazolium TFSI salts with different chain lengths (from 4 to 10 atoms) and with one to three oxygen atoms at position 1- of the imidazole ring. Both the neat ILs as well as the cognate lithium doped electrolytes have been structurally and physicochemically characterized and electrochemically evaluated. Thermal analyses indicate that the glass transition temperature of the electrolytes is displaced to higher temperatures than those of the corresponding neat ILs, being also higher (more positive) upon increasing the number of oxyethylene units. On the other hand, all 1 M LiTFSI doped synthesized electrolytes are thermally stable up to 300 °C. Raman spectroscopy results indicate that the fraction of TFSI anions coordinated to lithium ion decreases on increasing the number of alkoxy units. This finding implies that there is more “free” lithium ion available to link to the ethereal oxygen of the side chain of the imidazolium ring system. This fact influences the ionic conductivity of the neat ILs and their cognate electrolytes. The electrochemical properties —namely high room temperature conductivities as well as wide electrochemical stability windows— indicate that these materials are promising electrolytes for lithium-ion batteries (LIBs). Lithium half-cells using LiFePO4 (LFP) olivine have been assembled in order to assess the electrochemical performance by means of both cyclic voltammetry and galvanostatic charge/discharge tests. Overall, we have found that the electrochemical performance of these cells is better than that reported 1 M LiTFSI [Pyr14][TFSI], a common electrolyte in LIBs. The generated half-cell from the 1-alkoxyalkyl-3-methylimidazolium TFSI salts possess a high capacity up to 145 mAh∙g−1 at a current of 2C. The results reported herein show a striking relationship between structure and properties., This research has been financially supported by the Spanish Government within the projects Dispositivos de almacenamiento electrico guiados por aspectos medioambientales: de los materiales a prototipos de baterias de ion-sodio (RTI2018-095425-B-100) and Baterias avanzadas y sostenibles de ion sodio e ion potasio de estado solido (PID2021127864OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards More Sustainable Schiff Base Carboxylate Anodes for Sodium-Ion Batteries

  • Gómez-Berenguer, Irene
  • Herradón García, Bernardo
  • Amarilla, José Manuel
  • Castillo Martínez, E.
Bismine sodium salt (BSNa), a Schiff base with two sodium carboxylates, has shown promising electrochemical performance as an anode material. However, its synthesis involves toxic reagents and generates impurities, requiring significant solvent use for purification. This study introduces a novel synthetic method using sodium hydroxide as the sole reagent, which acts as both a base and Na source in the ion exchange step. With this procedure, we reduce the amounts of chemicals, diminish toxicity, improve the purity of the target compound, and use less solvent while maintaining comparable electrochemical performance. Additionally, the procedure is carried out under anhydrous conditions that avoid the undesirable hydrolysis of the imine linkages. In a previous report, the processing of the composite electrode was not established. In this article, we address this issue; the electrochemical performance, specifically the rate capability, is enhanced by processing the electrodes in laminate form rather than powder. As alternative to N-methyl-2- pyrrolidone (NMP), a common but disadvantageous solvent in laminate processing, other solvents were explored by testing acetone (DMK), methylisopropylketone (MIPK), and a DMK-NMP mixture. The remarkable electrochemical performance (specific capacity of 260–280 mAh/g, and capacity retentions higher than 84% at 1C (260 mA/g) remained consistent across these solvents. Furthermore, we investigated replacing copper with aluminum as the current collector to reduce costs and increase the energy density of the battery. While aluminum performed comparably to copper at low specific currents C/10 (26 mA/g), it showed a significant shift in the redox process potentials at higher specific currents, Grants PID2021-127864OB-I00 and RTI2018-095425-B-I00 were funded by MCIN/AEI/10.13039/501100011033 and by ͞ERDF, A way of making Europe. The predoctoral research personnel training grant PIPF-2023/ECO-30681 (IGB) was funded by the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easily Water-Synthesisable Iron-Chloranilate Frameworks as High Energy and High-Power Cathodes for Sustainable Alkali-Ion Batteries

  • Durán-Egido, Víctor
  • Darby, James P.
  • Cliffe, Matthew J.
  • Garitaonandia, José S.
  • Grande-Fernández, Paloma
  • Morris, Andrew J.
  • Carretero-González, Javier
  • Castillo-Martínez, Elizabeth
Achieving high battery performance from low-cost, easily synthesisable electrode materials is crucial for advancing energy storage technologies. Metal–organic frameworks (MOFs) combining inexpensive transition metals and organic ligands are promising candidates for high-capacity cathodes. Iron-chloranilate-water frameworks are herein reported to be produced in aqueous media under mild conditions. Removal of reticular water from known [Fe2(CAN)3(H2O)4] ⋅ 4H2O yields a new supramolecular metal–organic framework (SMOF), [Fe2(CAN)3(H2O)4]. Removing coordination water, a new 2D honeycomb-like MOF forms, Fe2(CAN)3, stable without counterions and solvent. This MOF adopts the unusual ABC layer-stacking, as determined using a combination of ab initio random structure searching, electron diffraction, and Rietveld refinement of powder XRD data. Magnetometry, Mossbauer and Raman spectroscopy confirm that all three [Fe2(CAN)3(H2O)x]⋅yH2O phases contain HS-Fe3+ and CAN2−, with magnetic ordering temperatures increasing (5→20 K) as the Fe−CAN connectivity increases. The SMOF and MOF show reversible (de)insertion of >4Li+/f.u. at average 2,59 V and 2,76 V vs Li+/Li, respectively. [Fe2(CAN)3] achieves 146 mAh/g at 1 C, thus specific energy (563 Wh/kg) and power (446 W/kg) in Li half-cells competitive with conventional LiFePO4 (~580 Wh/kg and ~450 W/kg). Beyond Li, [Fe2(CAN)3] delivers 394 Wh/kg and 421 Wh/kg, for Na and K half-cells respectively, becoming a competitive cathode for sustainable batteries., Grants PCI2022-133005, PCI2022-133010, PID2021-127864OB-I00 funded by MCIN/AEI/10.13039/501100011033 and, by the European Union PRTR funding through projects are acknowledged. J.P.D. acknowledges a SIMS scholarship and EPSRC for PhD funding. M.J.C. acknowledges funding from EPSRC (EP/X042782/1). The authors acknowledge networking support via the EPSRC Collaborative Computational Projects, CCP9 (Grant No. EP/M022595/1) and CCP-NC (Grant No. EP/ T026642/1). All calculations were performed using resources provided by the Cambridge Service for Data Driven Discovery (CSD3) operated by the University of Cambridge Research Computing Service, provided by Dell EMC and Intel using Tier-2 funding from the Engineering and Physical Sciences Research Council (capital Grant No. EP/P020259/ 1), and DiRAC funding from the Science and Technology Facilities Council. The DiRAC component of CSD3 was funded by BEIS capital funding via STFC capital Grant Nos. ST/P002307/1 and ST/R002452/1 and STFC operations Grant No. ST/R00689X/1., Peer reviewed