Pasar al contenido principal

MATERIALES NOVEDOSOS COMO ANODOS PARA HACER VIABLES LAS BATERIAS RECARGABLES DE BAJO COSTE BASADAS EN EL ION POTASIO

RTI2018-094550-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Hybrid carboxylate-Schiff-bases as electroactive anode materials for potassium-ion batteries

  • Castillo Martínez, Elisabet
  • Solana Madruga, Elena
  • Ebrahimi Koodehi, Sohaila
  • Leskes, Michal
  • del Burgo Olivares, Carlos
  • Linage, Martín
  • Martín Gandul, María Del Carmen
  • Sánchez Ahijon, Elena
  • Sánchez Ahijón, Elena
  • Cascos, Vanessa
  • Cascos Jiménez, Vanessa Amelia
  • Avila Brande
  • Ávila Brande, David
Three new crystalline potassium salts of hybrid carboxylate/Schiff-base oligomers are reported as electrochemically active anode materials for potassium ion batteries. One of them is constituted by the phenyl “dimer” KOOC-ϕ-C=N-ϕ-COOK (BSK-1) and the other two by the isomer “trimers” KOOC-ϕ-C=N-ϕ-N=C-ϕ-COOK (BSK-2 A) and KOOC-ϕ-N=C-ϕ-C=N-ϕ-COOK (BSK-2B). A structural model refined from powder X-ray diffraction data is discussed for the short (dimeric) salt. A pseudo-monoclinic unit cell, with space group P and lattice parameters a = 15.88(1) Å, b = 5.772(2) Å, c = 3.887(1) Å and β = 98.8(1)0, contains a single molecule. Crystal packing of the aromatic molecules can be described by a slipped π-stacking along the c-axis. All three oligomers are electrochemically active at voltages low enough to be used as anode in potassium ion batteries, at average voltages of 1.2 V vs K+/K for the dimer and 1.05 V vs K+/K for the trimers. Combined with 3.9 M KFSI in DME electrolyte, they show reversible capacities of 115 mAh/g (dimer), 233 mAh/g (BSK-2 A) and 104 mAh/g (BSK-2B) at C/10, with capacity retentions at 1C of 74% and 65% for the dimer and the trimers respectively. Based on the dQ/dV plots, the trimers react through two solid solution mechanisms, forming a stable radical intermediate, whereas the dimer changes from a single solid solution to a solid-solution+biphasic reaction. Future in-situ x-ray diffraction studies based on the solved crystal packing should enable to confirm these mechanisms.
Docta Complutense
Publicación Artículo científico (JournalArticle)

From Lithium-Ion Storage in 1D and 2D Redox Active Metal-Organic Frameworks

  • Montero, Jorge
  • Arenas Esteban, Daniel
  • Ávila Brande, David
  • Castillo Martínez, Elisabet
  • Licoccia, Silvia
  • Carretero González, Javier
The lithium ion storage properties of a series of metal-organic frameworks (MOFs) with formula {[M(L)(H2O)2]H2O}n and [M(CA)(Pyz)]n (where L refers to the tetraoxolene ligands: CA = chloranilate and DHBQ = dihydroxybenzoquinone; Pyz = pyrazine; M = Fe and Mn) and exhibiting a 1D and 2D structure, respectively, have been studied. The 1D MOFs ({[M(L)(H2O)2]H2O}n) show higher reversible capacity values for lithium ion insertion with respect to 2D structures containing two organic ligands (M(CA)(Pyz)]n). The gravimetric capacity for the 1D Fe-CA MOF is 75 mAh/g at 2.16 mA/g (∼ 1 lithium atom per formula unit) higher than for the Mn complexes which is 65 mAh/g at 2.12 mA/g, though isostructural. Lithium ion insertion in the 1D Mn-CA chains takes place at 2.4 V vs. Li+/Li which is ∼700 mV higher than what is recorded for the Fe analogue. This result is most probably due to much more stable d5 electronic configuration of Mn2+ than d6 of Fe2+ in its isostructural Fe-based framework analogue of the final reduced phases. The 1D Fe-DHBQ capacity is higher than its manganese analogue 75 mAh/g at 2.5 mA/g (0.8 lithiums) against 40 mAh/g. In general, the high voltages of reaction in these 1D MOFs suggest that they involve the participation of the ligand on the redox processes along with the reduction of the transition metal if any. In fact, the potential of ion insertion changed depending on the metal. This fact along with the absence of evidence of conversion reaction by x-ray diffraction of cycled electrodes suggests that the charge delocalization may be all along the metal-ligand molecular framework participating as a whole hybrid unit in the lithium storage.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lithium ion storage in 1D and 2D redox active metal-organic frameworks

  • Montero, Jorge
  • Arenas-Esteban, D.
  • Ávila-Brande, David
  • Castillo-Martínez, E.
  • Licoccia, S.
  • Carretero-González, Javier
The lithium ion storage properties of a series of metal-organic frameworks (MOFs) with formula {[M(L)(HO)]HO}n and [M(CA)(Pyz)]n (where L refers to the tetraoxolene ligands: CA = chloranilate and DHBQ = dihydroxybenzoquinone; Pyz = pyrazine; M = Fe and Mn) and exhibiting a 1D and 2D structure, respectively, have been studied. The 1D MOFs ({[M(L)(HO)]HO}n) show higher reversible capacity values for lithium ion insertion with respect to 2D structures containing two organic ligands (M(CA)(Pyz)]n). The gravimetric capacity for the 1D Fe-CA MOF is 75 mAh/g at 2.16 mA/g (∼ 1 lithium atom per formula unit) higher than for the Mn complexes which is 65 mAh/g at 2.12 mA/g, though isostructural. Lithium ion insertion in the 1D Mn-CA chains takes place at 2.4 V vs. Li/Li which is ∼700 mV higher than what is recorded for the Fe analogue. This result is most probably due to much more stable d electronic configuration of Mn than d of Fe in its isostructural Fe-based framework analogue of the final reduced phases. The 1D Fe-DHBQ capacity is higher than its manganese analogue 75 mAh/g at 2.5 mA/g (0.8 lithiums) against 40 mAh/g. In general, the high voltages of reaction in these 1D MOFs suggest that they involve the participation of the ligand on the redox processes along with the reduction of the transition metal if any. In fact, the potential of ion insertion changed depending on the metal. This fact along with the absence of evidence of conversion reaction by x-ray diffraction of cycled electrodes suggests that the charge delocalization may be all along the metal-ligand molecular framework participating as a whole hybrid unit in the lithium storage., J.M. greatly acknowledge the Funds of his doctoral grant, Materials for Health, Environment and Energy, from the University of Rome Tor Vergata (Italy). E.C.M. acknowledges financial support through a H2020 Marie Skłodowska Curie Individual Fellowship (H2020-MSCA-IF-2016 747449). J.C.G. acknowledges the Ramon y Cajal contract (RYC-2015-17722). J.C.G., D.A.B. and E.C.M. also acknowledge the Retos Projects from MICINN (MAT2017-86796-R, MAT2017-84385-R and RTI2018-094550-A-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable materials for off-grid battery applications: Advances, challenges and prospects

  • Navalpotro, Paula
  • Castillo-Martínez, E.
  • Carretero-González, Javier
The implementation of sustainable batteries coupled to renewable energy conversion systems in off-grid, poor and remote communities will overcome some of the technological challenges for electrification, such as the difficult geographical and cost accessibility, improving their modest technical capabilities and making the full system ecofriendly. Besides, their application to power off-grid "structures and facilities"requiring a large amount of energy (>50 kW) such as heavyweight carriers (e.g. boats and trucks) and for instance those located far away from the main grid such as small-size islands and mines, will have an immediate impact on the decrease of greenhouse gas emissions to the atmosphere. Herein we present an overview of recent efforts to develop green and advanced electrode and electrolyte materials for future sustainable batteries. Further, we will also highlight both current second-life and end-of-life battery disposal sustainable strategies that are applied towards a zero-carbon future. This journal is, P. N. thanks the Spanish Ministry of Science and Innovation through the SUSBAT project (RTI2018-101049-B-I00, MCI-AEI/ FEDER, UE). E. C. M. acknowledges financial support through a H2020 Marie Skłodowska Curie Individual Fellowship (H2020- MSCA-IF-2016 747449) and the Spanish Ministry of Science and Innovation through the ANOKIB project (RTI2018-094550-A- I00). J. C. G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722), the Retos Project (MAT2017-86796-R, AEI/FEDER/UE), the PTI-FLOWBAT project (Ref. No.: 201980E101) from the Spanish Research Council (CSIC) and the AESCA-CYTED project (Ref. No.: 201980E101). Finally, we thank Vincent Castillo-Carretero for being an inspiration and motivation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cellulose Nanocrystals in Sustainable Energy Systems

  • Calle-Gil, R.
  • Castillo-Martínez, E.
  • Carretero-González, Javier
The transition to low-carbon emitting technologies provokes an increasing demand in energy conversion and storage systems such as fuel cells, batteries, and supercapacitors, and consequently, the need for their raw materials. The use of new chemistries from earth-abundant precursors instead of scarce, toxic, and nondegradable components existing in current systems must be a priority in future years. Cellulose is the most abundant biopolymer on earth. Their crystalline constituents designated as cellulose nanocrystals (CNC) have been studied as functional materials due to their excellent structural and chemical properties. This review covers a recent collection of works on innocuous CNC-based materials with special attention to the fabrication methodologies of electrodes, electrolytes, membranes, and separators. The implementation of these CNC-derived materials in sustainable energy conversion and storage systems is also discussed., R.C.G. gratefully acknowledge the Community of Madrid (No. IND2019/AMB-17083) and the Micro Electrochemical Technologies S.L. (B5Tec) for financial support. E.C.M. acknowledges financial support through the Spanish Ministry of Science and Innovation through the ANOKIB project (No. RTI2018-094550-A-I00). J.C.G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (No. RYC-2015-17722)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Conductivity in a Fluorine-Free K-Ion Polymer Electrolyte

  • Elmanzalawy, M.
  • Sánchez, Elena
  • Kisacik, O.
  • Carretero-González, Javier
  • Castillo-Martínez, E.
Solid polymer electrolytes (SPEs) could play a major role in the transition to safer and high-energy-density potassium-based batteries. However, most polymeric K-ion electrolytes are based on fluorine-containing anions and flammable organic solvents, whose safety is nowadays in question. Herein, we report a facile solvent-free synthesis of a series of several poly(ethylene oxide) (PEO)-based SPE solid solutions with KBPhsalt as potassium-ion source, including the formation of two crystalline (PEO)/KBPhcomplexes. The ionic conductivity of these novel K-ion SPEs above and below the melting point of PEO is rationalized in light of their glass-transition temperature and chemical composition. We highlight that below the melting point of PEO, the crystalline complexes may not be intrinsically ionically conducting, but they act as ion sinks preventing the polymer cross-linking and the formation of contact ion pairs and lower the glass-transition temperature leading to a conductivity of 1.1 × 10S cmat 55 °C. A high ionic conductivity of 1.8 × 10S cmis achieved at 80 °C for the optimum (PEO)/KBPhcomposition (3.2 mol % KBPh). Besides, the SPE compositions were found to be stable up to 4 V vs Kmetal electrode at 60 °C. The (PEO)/KBPhcomposite electrolyte employed in an all-solid-state symmetric cell with Prussian Blue electrodes showed reversible K-ion (de)intercalation, where a reversible capacity of 20 mAh gand low voltage hysteresis were achieved for 20 cycles. Considering the material availability, ease of synthesis, and promising electrochemical properties, this work may encourage future research on fluorine-free polymer electrolytes for K-ion batteries., The authors acknowledge financial support from the Ministry of Science and Innovation of Spain (ANOKIB; RTI2018-094550-A-I00). J.C.-G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722). O.K. acknowledges support from the Erasmus+ grantthrough Eskisehir Technical University. M.E. acknowledges financial support from the Erasmus+ grant for mobility through the Université de Picardie Jules Verne and the Erasmus Mundus Program “MESC+” of the European Commission