Pasar al contenido principal

NUEVOS ELECTROLITOS POLIMERICOS RECARGABLES PARA BATERIAS ACUOSAS DE FLUJO REDOX MAS EFICIENTES, SEGURAS Y DE BAJO COSTE

MAT2017-86796-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Multifunctional Metal-Free Rechargeable Polymer Composite Nanoparticles Boosted by CO2

  • Fernandez Benito, Amparo
  • Rodríguez, Gema
  • Arenas Esteban, Daniel
  • Sjödin, Martin
  • Navalpotrp, Paula
  • Rodríguez-Caballero, Daniel
  • Ávila Brande, David
  • López Manchado, Miguel A.
  • Carretero González, Javier
Herein, we present a multigram scale-up route for the preparation of novel polymer composite nanoparticles as potential multifunctional rechargeable material for future, sustainable batteries. The nanoparticles (20 nm) comprise three innocuous yet functional interpenetrated macromolecular networks: polypyrrole, methylcellulose, and lignin. They are uniquely assembled in strands or chains (∼200 nm) such as necklace beads and show long-term stability as water dispersion. We find that an aqueous suspension of this hierarchical nanomaterial shows two sets of reversible redox peaks, separated by ∼600 mV, originating from the catechol moieties present in the lignin biopolymer. Remarkably, the addition of carbon dioxide increased the capacity of one of the redox processes by 500%. Importantly, the three redox stages occur in the presence of the same nanostructured polymer so being a potentially bifunctional material to be used in advanced electrochemical systems. The new properties are attributed to an intrinsic chemical and electronic coupling at the nanoscale among the different building blocks of the metal-free polymer composite and the structural rearrangement of the interpenetrated polymer network by the incorporation of CO2. We have provided both a new electrochemically multifunctional hierarchically structured material and a facile route that could lead to novel sustainable energy applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

From Lithium-Ion Storage in 1D and 2D Redox Active Metal-Organic Frameworks

  • Montero, Jorge
  • Arenas Esteban, Daniel
  • Ávila Brande, David
  • Castillo Martínez, Elisabet
  • Licoccia, Silvia
  • Carretero González, Javier
The lithium ion storage properties of a series of metal-organic frameworks (MOFs) with formula {[M(L)(H2O)2]H2O}n and [M(CA)(Pyz)]n (where L refers to the tetraoxolene ligands: CA = chloranilate and DHBQ = dihydroxybenzoquinone; Pyz = pyrazine; M = Fe and Mn) and exhibiting a 1D and 2D structure, respectively, have been studied. The 1D MOFs ({[M(L)(H2O)2]H2O}n) show higher reversible capacity values for lithium ion insertion with respect to 2D structures containing two organic ligands (M(CA)(Pyz)]n). The gravimetric capacity for the 1D Fe-CA MOF is 75 mAh/g at 2.16 mA/g (∼ 1 lithium atom per formula unit) higher than for the Mn complexes which is 65 mAh/g at 2.12 mA/g, though isostructural. Lithium ion insertion in the 1D Mn-CA chains takes place at 2.4 V vs. Li+/Li which is ∼700 mV higher than what is recorded for the Fe analogue. This result is most probably due to much more stable d5 electronic configuration of Mn2+ than d6 of Fe2+ in its isostructural Fe-based framework analogue of the final reduced phases. The 1D Fe-DHBQ capacity is higher than its manganese analogue 75 mAh/g at 2.5 mA/g (0.8 lithiums) against 40 mAh/g. In general, the high voltages of reaction in these 1D MOFs suggest that they involve the participation of the ligand on the redox processes along with the reduction of the transition metal if any. In fact, the potential of ion insertion changed depending on the metal. This fact along with the absence of evidence of conversion reaction by x-ray diffraction of cycled electrodes suggests that the charge delocalization may be all along the metal-ligand molecular framework participating as a whole hybrid unit in the lithium storage.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organometallic-Derived Carbon (ODC)-Metal Nano-Oxide Composites as Improved Electrode Materials for Supercapacitors

  • Arenas-Esteban, D.
  • Urones-Garrote, E.
  • Carretero-González, Javier
  • Birss, V.
  • Otero-Díaz, L. C.
  • Ávila-Brande, D.
In the search for the new generation of electrochemical energy storage materials, a novel and straightforward synthetic route for porous carbons and metal oxide nanoparticle composites based on the chlorination of the organometallic compounds Ni(CH) and Mn(CHO) at moderate temperatures, followed by hydrothermal treatment, has been developed. Electrochemical measurements in a three-electrode configuration show that, in both composites NiO@ODC and MnO@ODC, a synergistic effect between the capacitive and pseudocapacitive energy storage mechanisms is observed, thereby improving their electrochemical performance vs pure carbon materials. Electrochemical evaluation of symmetric cells gave gravimetric capacitances of 124 and 130 F g for NiO@ODC and MnO@ODC, respectively. However, the porous structure of the carbon matrix and the higher conductivity of MnO, together, were found to be responsible for the superior electrochemical performance of MnO@ODC., The authors acknowledge financial support through the Comunidad de Madrid Project S2013/MIT-2753 (MATERYENER- 3) and the Retos Projects from MINECO with references MAT2017-86796-R and MAT2017-84385-R. J.C.- G, thanks the Spanish Ministry of Economy, Industry and Competitiveness, for funding through a Ramón y Cajal fellowship (RYC-2015-01627).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lithium ion storage in 1D and 2D redox active metal-organic frameworks

  • Montero, Jorge
  • Arenas-Esteban, D.
  • Ávila-Brande, David
  • Castillo-Martínez, E.
  • Licoccia, S.
  • Carretero-González, Javier
The lithium ion storage properties of a series of metal-organic frameworks (MOFs) with formula {[M(L)(HO)]HO}n and [M(CA)(Pyz)]n (where L refers to the tetraoxolene ligands: CA = chloranilate and DHBQ = dihydroxybenzoquinone; Pyz = pyrazine; M = Fe and Mn) and exhibiting a 1D and 2D structure, respectively, have been studied. The 1D MOFs ({[M(L)(HO)]HO}n) show higher reversible capacity values for lithium ion insertion with respect to 2D structures containing two organic ligands (M(CA)(Pyz)]n). The gravimetric capacity for the 1D Fe-CA MOF is 75 mAh/g at 2.16 mA/g (∼ 1 lithium atom per formula unit) higher than for the Mn complexes which is 65 mAh/g at 2.12 mA/g, though isostructural. Lithium ion insertion in the 1D Mn-CA chains takes place at 2.4 V vs. Li/Li which is ∼700 mV higher than what is recorded for the Fe analogue. This result is most probably due to much more stable d electronic configuration of Mn than d of Fe in its isostructural Fe-based framework analogue of the final reduced phases. The 1D Fe-DHBQ capacity is higher than its manganese analogue 75 mAh/g at 2.5 mA/g (0.8 lithiums) against 40 mAh/g. In general, the high voltages of reaction in these 1D MOFs suggest that they involve the participation of the ligand on the redox processes along with the reduction of the transition metal if any. In fact, the potential of ion insertion changed depending on the metal. This fact along with the absence of evidence of conversion reaction by x-ray diffraction of cycled electrodes suggests that the charge delocalization may be all along the metal-ligand molecular framework participating as a whole hybrid unit in the lithium storage., J.M. greatly acknowledge the Funds of his doctoral grant, Materials for Health, Environment and Energy, from the University of Rome Tor Vergata (Italy). E.C.M. acknowledges financial support through a H2020 Marie Skłodowska Curie Individual Fellowship (H2020-MSCA-IF-2016 747449). J.C.G. acknowledges the Ramon y Cajal contract (RYC-2015-17722). J.C.G., D.A.B. and E.C.M. also acknowledge the Retos Projects from MICINN (MAT2017-86796-R, MAT2017-84385-R and RTI2018-094550-A-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ NMR metrology reveals reaction mechanisms in redox flow batteries

  • Zhao, E. W.
  • Liu, T.
  • Jónsson, E.
  • Lee, J.
  • Temprano, I.
  • Jethwa, R. B.
  • Wang, A.
  • Smith, H.
  • Carretero-González, Javier
  • Song, Q.
  • Grey, C.P.
Large-scale energy storage is becoming increasingly critical to balancing renewable energy production and consumption. Organic redox flow batteries, made from inexpensive and sustainable redox-active materials, are promising storage technologies that are cheaper and less environmentally hazardous than vanadium-based batteries, but they have shorter lifetimes and lower energy density. Thus, fundamental insight at the molecular level is required to improve performance. Here we report two in situ nuclear magnetic resonance (NMR) methods of studying redox flow batteries, which are applied to two redox-active electrolytes: 2,6-dihydroxyanthraquinone (DHAQ) and 4,4′-((9,10-anthraquinone-2,6-diyl)dioxy) dibutyrate (DBEAQ). In the first method, we monitor the changes in the H NMR shift of the liquid electrolyte as it flows out of the electrochemical cell. In the second method, we observe the changes that occur simultaneously in the positive and negative electrodes in the full electrochemical cell. Using the bulk magnetization changes (observed via the H NMR shift of the water resonance) and the line broadening of the H shifts of the quinone resonances as a function of the state of charge, we measure the potential differences of the two single-electron couples, identify and quantify the rate of electron transfer between the reduced and oxidized species, and determine the extent of electron delocalization of the unpaired spins over the radical anions. These NMR techniques enable electrolyte decomposition and battery self-discharge to be explored in real time, and show that DHAQ is decomposed electrochemically via a reaction that can be minimized by limiting the voltage used on charging. We foresee applications of these NMR methods in understanding a wide range of redox processes in flow and other electrochemical systems., W.Z. and C.P.G. acknowledge support from Centre of Advanced Materials for Integrated Energy Systems (CAM-IES), via EPSRC grant number EP/P007767/1. E.W.Z., R.J. and C.P.G. acknowledge support from Shell. E.W.Z. acknowledges support from the Manifest exchange programme via EPSRC grant number EP/N032888/1. T.L. acknowledges support from the Schlumberger Fellowship, Darwin College. E.J. acknowledges support from the Swedish Research Council. We thank A. Brookfield for assistance with the EPR measurement; P. A. A. Klusener from Shell, H. Bronstein, I. Fleming, D. S. Wright, K. Märker, C. Xu, P. C. M. M. Magusin from the University of Cambridge and E. Castillo-Martínez from Universidad Complutense de Madrid for discussions; R. Tan from Imperial College London and D. Lyu, Y. Kim, Y. Jin, and J. Lu from the University of Cambridge for assistance setting up the redox flow battery. A.W. and Q.S. acknowledge Imperial College start-up funding and CAM-IES seed funding. J.C.G. acknowledges support from the Spanish Ministry of Science, Innovation and Universities through a Ramon y Cajal Fellowship (RYC-2015-17722) and the Retos Project (MAT2017-86796-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Supercapacitor Materials Derived from Hydrochar/Gold Nanograpes

  • Arenas Esteban, D.
  • Guerrero Martínez, A.
  • Carretero, Javier
  • Birss, V. I.
  • Otero-Díaz, L. C.
  • Ávila Brande, D.
Since electrode materials play a crucial role in the performance of supercapacitors, the design of architectures based on carbon nanocomposites can enhance the electrochemical performance based on the synergistic effect between the components. Here, we have devised a facile synthetic route for the preparation of a C/Au nanocomposite, denoted as carbon/gold nanograpes (C/Au NGs), based on the hydrothermal polymerization of glucose-stabilized gold nanoparticles. Carbonization/activation of the C/Au NGs at 500 °C yields microporous carbon nanospheres containing several Au nanoparticles, giving a high volumetric capacitance. However, this volumetric capacitance suffers a dramatic drop at fast charge/discharge rates. When heating the C/Au NGs at 700 °C, the Au nanoparticles melt and flow out of the carbon nanospheres, altering the micropore structure of the C/Au NGs shells, and recrystallize at the surface, while some nanoclusters containing only a few Au atoms remained homogeneously dispersed within the pore network of the carbon shell. These nanostructural changes result in an increase in the ionic transport rates across the carbon shell as well as a lowering of the resistance, thus increasing the volumetric capacitance in aqueous acidic solutions and showing a remarkable improvement in the capacitance retention., We thank the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (Grant RYC-2015-17722) and funding from the Retos Projects (Grants MAT2017-84385-R and MAT2017- 86796-R, AEI/FEDER/UE), as well as the Natural Sciences and Engineering Research Council of Canada (NSERC) for the overall support of this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-active coordination polymers as bifunctional electrolytes in slurry-based aqueous batteries at neutral pH

  • Montero, J.
  • Navalpotro, Paula
  • D'Epifanio, Alessandra
  • Mecheri, B.
  • Licoccia, S.
  • Carretero-González, Javier
Highly water-dispersible, redox-active 1D coordination polymers (CPs) have been synthesized using low-cost precursors. These CPs, containing chloranilic acid as organic ligand and a transition element, such as Fe and Mn as a metal center, form long-term stable slurries containing up to 100 g/L solid particles in aqueous media (0.5 M NaCl, 1 mg carbon nanotubes). Voltammetry studies showed that the iron-based particulate slurries exhibited three different redox stages with no metal plating. However, the suspensions with manganese-based coordination polymers experienced a metal plating process in the same potential window range as for the iron-based CPs. Moreover, the particulate suspension of iron-CPs shown longer-term stability than their isostructural analogs based on manganese. The 1D Fe-CPs were used as catholyte and anolyte in a symmetrical cell with a low-cost size exclusion cellulose membrane acting as a separator. The cell experienced a reversible capacity value of 45 mAh/g (225 mAh/L) at a current density value of 20 mA/g for 50 cycles (~12 days) at neutral pH. This study opens the possibility of using inexpensive coordination polymers as single bifunctional electrolyte material in aqueous batteries and other sustainable energy storage-related systems., J.M. greatly acknowledge the Funds of his doctoral grant, Materialsfor Health, Environment and Energy, from the University of Rome TorVergata (Italy). J.C.G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) througha Ramon y Cajal Fellowship (RYC-2015-17722), the Retos Project(MAT2017-86796-R, AEI/FEDER/UE) and the PTI-FLOWBAT project(Ref. N°: 201980E101) from the Spanish Research Council (CSIC). J.M., B.M., and A.D. acknowledge the Regione Lazio for funding theresearch through the project POR FESR LAZIO 2014–2020, NoA0375-2020-36492.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel ferrocene-containing amphiphilic block copolymer nanoparticles as high-capacity charge carriers in aqueous redox flow systems

  • Fernández-Benito, Amparo
  • Rivera-Gálvez, Francisco J.
  • Cisneros-Ruiz, P.
  • Sanz-Horta, Raúl
  • Jasso-Gastinel, Carlos F.
  • López-Manchado, Miguel A.
  • Carretero-González, Javier
Size-exclusion polymer electrolytes are promising charge carriers to diminish the crossover and allowing commercially available low-cost porous membranes in redox flow batteries. Boosting the solubility in water and maximizing the number of redox sites to enhance the capacity of these polymeric systems is challenging. New highly water dispersed amphiphilic diblock copolymers are reported here, with an average concentration value of 1.7 10 mmol of Ferrocene (Fc)-linked moieties per mg of polymer, determined by total X-ray reflection fluorescence. These redox amphiphilic block copolymers are stabilized in water as spherical nanoparticles (20 nm) by using a simple phase solvent inversion procedure. We evidence a maximum polymer dispersibility value of 6 g/L in water, for long-term stable polymer nanoparticle suspensions, yielding a theoretical capacity value of 4.78 mAh at 10.5 mM Fc. Further adjustment of the ionic conductivity and pH of these stable redox block copolymer suspensions has rendered a conductivity value of 44.5 mS/cm at pH values close to a neutral one, by adding a variety of salt supports. Studies using a 3-electrode configuration cell reveal an efficient charge transport between each of the Fc motifs in the polymer nanoparticle. A capacity value of 3.1 mAh with no transient of the polymer nanoparticles crosswise the cheap porous membrane is evidenced when cycled as polycatholyte material in a Zn hybrid aqueous redox flow battery. The particle size and electronic changes of these novel amphiphilic redox block copolymer electrolytes during consecutive redox cycles have also been monitored by dynamic light scattering and ultraviolet-visible spectroscopy, respectively. The analysis of the results enables the understanding of the main mechanisms behind their non-fully reversible capacity. Among them, aggregation and sedimentation, along with retention inside the graphite felt electrode acting the latter as a filter. These insights will aid the design of future polymer electrolyte materials and redox flow battery components with better performance and cost., JCG acknowledge support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722) and the Retos Project (MAT2017-86796-R, AEI/FEDER/UE). AFB acknowledges support from the General Office of Research and Innovation (Regional Ministry of Education and Research from Madrid Community) through Industrial PhD fellowship (ind2018/ind-9882). PCR want to thanks to Spanish Research Council (CSIC) through a JAE-Intro Fellowship (JAEINT20_EX_0780). The authors acknowledge access to the CNBeCSIC for the access to the CryoEM facility, and in particular to Rocío Arranz for her assistance. The authors would also like to thank the Biomaterials Group from the ICTP (CSIC) for the access to the DLS and Nanodrop equipments. The authors are also grateful for the assistance of the ICTP mechanical and electrical unit. This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTIþ) Transicion Energetica Sostenibleþ (PTI-TRANSENERþ) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded bythe Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094., Peer reviewed