Pasar al contenido principal

INNOVATIVE CARBON NANOSTRUCTURES FOR ENERGY STORAGE

RYC-2015-17722

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

A Comparative Study on HCN Polymers Synthesized by Polymerization of NH4CN or Diaminomaleonitrile in Aqueous Media: New Perspectives for Prebiotic Chemistry and Materials Science

  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
  • Carretero González, J.
  • García Fernández, L.
  • Rosa Aguilar, M.
HCN polymers are a group of complex and heterogeneous substances that are widely known in the fields of astrobiology and prebiotic chemistry. In addition, they have recently received considerable attention as potential functional material coatings. However, the real nature and pathways of formation of HCN polymers remain open questions. It is well established that the tuning of macromolecular structures determines the properties and practical applications of a polymeric material. Herein, different synthetic conditions were explored for the production of HCN polymers from NHCN or diaminomaleonitrile in aqueous media with different concentrations of the starting reactants and several reaction times. By using a systematic methodology, both series of polymers were shown to exhibit similar, but not identical, spectroscopic and thermal fingerprints, which resulted in a clear differentiation of their morphological and electrochemical properties. New macrostructures are proposed for HCN polymers, and promising insights are discussed for prebiotic chemistry and materials science on the basis of the experimental results., The authors used the research facilities of the Centro de Astrobiología (CAB) and were supported by the Instituto Nacional de Técnica Aeroespacial “Esteban Terradas” (INTA) and by the Spanish Ministerio de Ciencia, Innovacijn y Universidades ESP2017-89053-C2-2-P. Additionally, the authors are grateful to Ma Teresa Fernández for recording the FTIR spectra and XRD and Rosana Ramírez for the SEM images. J.C.-G. acknowledges the Ramjn y Cajal contract (RYC-2015-17722); With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (MDM-2017-0737), Peer review
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ NMR metrology reveals reaction mechanisms in redox flow batteries

  • Zhao, E. W.
  • Liu, T.
  • Jónsson, E.
  • Lee, J.
  • Temprano, I.
  • Jethwa, R. B.
  • Wang, A.
  • Smith, H.
  • Carretero-González, Javier
  • Song, Q.
  • Grey, C.P.
Large-scale energy storage is becoming increasingly critical to balancing renewable energy production and consumption. Organic redox flow batteries, made from inexpensive and sustainable redox-active materials, are promising storage technologies that are cheaper and less environmentally hazardous than vanadium-based batteries, but they have shorter lifetimes and lower energy density. Thus, fundamental insight at the molecular level is required to improve performance. Here we report two in situ nuclear magnetic resonance (NMR) methods of studying redox flow batteries, which are applied to two redox-active electrolytes: 2,6-dihydroxyanthraquinone (DHAQ) and 4,4′-((9,10-anthraquinone-2,6-diyl)dioxy) dibutyrate (DBEAQ). In the first method, we monitor the changes in the H NMR shift of the liquid electrolyte as it flows out of the electrochemical cell. In the second method, we observe the changes that occur simultaneously in the positive and negative electrodes in the full electrochemical cell. Using the bulk magnetization changes (observed via the H NMR shift of the water resonance) and the line broadening of the H shifts of the quinone resonances as a function of the state of charge, we measure the potential differences of the two single-electron couples, identify and quantify the rate of electron transfer between the reduced and oxidized species, and determine the extent of electron delocalization of the unpaired spins over the radical anions. These NMR techniques enable electrolyte decomposition and battery self-discharge to be explored in real time, and show that DHAQ is decomposed electrochemically via a reaction that can be minimized by limiting the voltage used on charging. We foresee applications of these NMR methods in understanding a wide range of redox processes in flow and other electrochemical systems., W.Z. and C.P.G. acknowledge support from Centre of Advanced Materials for Integrated Energy Systems (CAM-IES), via EPSRC grant number EP/P007767/1. E.W.Z., R.J. and C.P.G. acknowledge support from Shell. E.W.Z. acknowledges support from the Manifest exchange programme via EPSRC grant number EP/N032888/1. T.L. acknowledges support from the Schlumberger Fellowship, Darwin College. E.J. acknowledges support from the Swedish Research Council. We thank A. Brookfield for assistance with the EPR measurement; P. A. A. Klusener from Shell, H. Bronstein, I. Fleming, D. S. Wright, K. Märker, C. Xu, P. C. M. M. Magusin from the University of Cambridge and E. Castillo-Martínez from Universidad Complutense de Madrid for discussions; R. Tan from Imperial College London and D. Lyu, Y. Kim, Y. Jin, and J. Lu from the University of Cambridge for assistance setting up the redox flow battery. A.W. and Q.S. acknowledge Imperial College start-up funding and CAM-IES seed funding. J.C.G. acknowledges support from the Spanish Ministry of Science, Innovation and Universities through a Ramon y Cajal Fellowship (RYC-2015-17722) and the Retos Project (MAT2017-86796-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional metal-free rechargeable polymer composite nanoparticles boosted by CO2

  • Fernández-Benito, Amparo
  • Rodríguez, G.
  • Arenas-Esteban, D.
  • Sjödin, M.
  • Navalpotro, Paula
  • Rodríguez-Caballero, D.
  • Ávila-Brande, D.
  • López-Manchado, Miguel A.
  • Carretero-González, Javier
Herein, we present a multigram scale-up route for the preparation of novel polymer composite nanoparticles as potential multifunctional rechargeable material for future, sustainable batteries. The nanoparticles (20 nm) comprise three innocuous yet functional interpenetrated macromolecular networks: polypyrrole, methylcellulose, and lignin. They are uniquely assembled in strands or chains (~200 nm) such as necklace beads and show long-term stability as water dispersion. We find that an aqueous suspension of this hierarchical nanomaterial shows two sets of reversible redox peaks, separated by ~600 mV, originating from the catechol moieties present in the lignin biopolymer. Remarkably, the addition of carbon dioxide increased the capacity of one of the redox processes by 500%. Importantly, the three redox stages occur in the presence of the same nanostructured polymer so being a potentially bifunctional material to be used in advanced electrochemical systems. The new properties are attributed to an intrinsic chemical and electronic coupling at the nanoscale among the different building blocks of the metal-free polymer composite and the structural rearrangement of the interpenetrated polymer network by the incorporation of CO. We have provided both a new electrochemically multifunctional hierarchically structured material and a facile route that could lead to novel sustainable energy applications., J.C.G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722) and the Retos Project (MAT2017-86796-R, AEI/FEDER/UE). D.A.E. and D.A.B acknowledge the Retos Project (MAT2017-84385-R, AEI/FEDER/UE). P.N. acknowledges the postdoctoral contract from the Government of the Comunidad de Madrid (CAM, PEJD-2018-POST/AMB-9248). M.L.M. and J.C.G. acknowledge the PTI-FLOWBAT project (Ref. Nº: 201980E101) from the Spanish Research Council (CSIC). We would also like to thank the Biomaterials Group from the ICTP-CSIC for letting us use the DLS equipment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable Supercapacitor Materials Derived from Hydrochar/Gold Nanograpes

  • Arenas Esteban, D.
  • Guerrero Martínez, A.
  • Carretero, Javier
  • Birss, V. I.
  • Otero-Díaz, L. C.
  • Ávila Brande, D.
Since electrode materials play a crucial role in the performance of supercapacitors, the design of architectures based on carbon nanocomposites can enhance the electrochemical performance based on the synergistic effect between the components. Here, we have devised a facile synthetic route for the preparation of a C/Au nanocomposite, denoted as carbon/gold nanograpes (C/Au NGs), based on the hydrothermal polymerization of glucose-stabilized gold nanoparticles. Carbonization/activation of the C/Au NGs at 500 °C yields microporous carbon nanospheres containing several Au nanoparticles, giving a high volumetric capacitance. However, this volumetric capacitance suffers a dramatic drop at fast charge/discharge rates. When heating the C/Au NGs at 700 °C, the Au nanoparticles melt and flow out of the carbon nanospheres, altering the micropore structure of the C/Au NGs shells, and recrystallize at the surface, while some nanoclusters containing only a few Au atoms remained homogeneously dispersed within the pore network of the carbon shell. These nanostructural changes result in an increase in the ionic transport rates across the carbon shell as well as a lowering of the resistance, thus increasing the volumetric capacitance in aqueous acidic solutions and showing a remarkable improvement in the capacitance retention., We thank the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (Grant RYC-2015-17722) and funding from the Retos Projects (Grants MAT2017-84385-R and MAT2017- 86796-R, AEI/FEDER/UE), as well as the Natural Sciences and Engineering Research Council of Canada (NSERC) for the overall support of this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compact polyelectrolyte hydrogels of gelatin and chondroitin sulfate as ion¿s mobile media in sustainable all-solid state electrochemical devices

  • González, Jimena
  • Burlaka, Arsen
  • Paz, José
  • Carretero-González, Javier
  • Hernández, Rebeca
The creation of flexible and high strength hydrogel materials from natural polymers as low cost and safe solid electrolytes is an area of intense research nowadays. We present a novel approach for the preparation of gelatin and chondroitin sulfate hydrogel complexes by using a simple centrifugation process. The innovative dual-bio-gel-network is able to swell and shrink upon changes on the pH and NaCl concentration. The solid bio-gels sandwiched between two macroporous carbon electrode materials are assembled in symmetric cells and their electrochemical properties are evaluated by cyclic voltammetry, galvanostatic, and impedance spectroscopy measurements. The cells exhibit areal capacitance values up to 2.74 mF cm¿2 (3.1 F g¿1) and a low resistance value of 12 Ohm cm2 for graphene electrode materials. These properties are the consequence of the successful infiltration of the solid gel inside the porous structure of the carbon electrode that boosts the charge transfer at the biopolymer/carbon electrode interphase. The results obtained may provide additional inspiration in the emerging field of bioelectronics, where biocompatible and powered systems are of the utmost importance., The authors would like to thank David Go´mez for assistance regarding scanning electron microscopy (SEM). Rebeca Herna´ndez is a member of the SusPlast platform from the Spanish National Research Council (CSIC). This study was supported by CONICET (National Scientific and Technical Research Council), ANPCyT (National Agency of Scientific and Technology Promotion, PICT 2016-1905), UNMdP (National University of Mar del Plata) and Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (grants: MAT2017-83014-C2-2-P and MAT2017-88232-P). Javier Carretero-Gonza´lez acknowledges the Ramon y Cajal Fellow (RYC-2015-17722) from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable materials for off-grid battery applications: Advances, challenges and prospects

  • Navalpotro, Paula
  • Castillo-Martínez, E.
  • Carretero-González, Javier
The implementation of sustainable batteries coupled to renewable energy conversion systems in off-grid, poor and remote communities will overcome some of the technological challenges for electrification, such as the difficult geographical and cost accessibility, improving their modest technical capabilities and making the full system ecofriendly. Besides, their application to power off-grid "structures and facilities"requiring a large amount of energy (>50 kW) such as heavyweight carriers (e.g. boats and trucks) and for instance those located far away from the main grid such as small-size islands and mines, will have an immediate impact on the decrease of greenhouse gas emissions to the atmosphere. Herein we present an overview of recent efforts to develop green and advanced electrode and electrolyte materials for future sustainable batteries. Further, we will also highlight both current second-life and end-of-life battery disposal sustainable strategies that are applied towards a zero-carbon future. This journal is, P. N. thanks the Spanish Ministry of Science and Innovation through the SUSBAT project (RTI2018-101049-B-I00, MCI-AEI/ FEDER, UE). E. C. M. acknowledges financial support through a H2020 Marie Skłodowska Curie Individual Fellowship (H2020- MSCA-IF-2016 747449) and the Spanish Ministry of Science and Innovation through the ANOKIB project (RTI2018-094550-A- I00). J. C. G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722), the Retos Project (MAT2017-86796-R, AEI/FEDER/UE), the PTI-FLOWBAT project (Ref. No.: 201980E101) from the Spanish Research Council (CSIC) and the AESCA-CYTED project (Ref. No.: 201980E101). Finally, we thank Vincent Castillo-Carretero for being an inspiration and motivation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Conductivity in a Fluorine-Free K-Ion Polymer Electrolyte

  • Elmanzalawy, M.
  • Sánchez, Elena
  • Kisacik, O.
  • Carretero-González, Javier
  • Castillo-Martínez, E.
Solid polymer electrolytes (SPEs) could play a major role in the transition to safer and high-energy-density potassium-based batteries. However, most polymeric K-ion electrolytes are based on fluorine-containing anions and flammable organic solvents, whose safety is nowadays in question. Herein, we report a facile solvent-free synthesis of a series of several poly(ethylene oxide) (PEO)-based SPE solid solutions with KBPhsalt as potassium-ion source, including the formation of two crystalline (PEO)/KBPhcomplexes. The ionic conductivity of these novel K-ion SPEs above and below the melting point of PEO is rationalized in light of their glass-transition temperature and chemical composition. We highlight that below the melting point of PEO, the crystalline complexes may not be intrinsically ionically conducting, but they act as ion sinks preventing the polymer cross-linking and the formation of contact ion pairs and lower the glass-transition temperature leading to a conductivity of 1.1 × 10S cmat 55 °C. A high ionic conductivity of 1.8 × 10S cmis achieved at 80 °C for the optimum (PEO)/KBPhcomposition (3.2 mol % KBPh). Besides, the SPE compositions were found to be stable up to 4 V vs Kmetal electrode at 60 °C. The (PEO)/KBPhcomposite electrolyte employed in an all-solid-state symmetric cell with Prussian Blue electrodes showed reversible K-ion (de)intercalation, where a reversible capacity of 20 mAh gand low voltage hysteresis were achieved for 20 cycles. Considering the material availability, ease of synthesis, and promising electrochemical properties, this work may encourage future research on fluorine-free polymer electrolytes for K-ion batteries., The authors acknowledge financial support from the Ministry of Science and Innovation of Spain (ANOKIB; RTI2018-094550-A-I00). J.C.-G. acknowledges support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722). O.K. acknowledges support from the Erasmus+ grantthrough Eskisehir Technical University. M.E. acknowledges financial support from the Erasmus+ grant for mobility through the Université de Picardie Jules Verne and the Erasmus Mundus Program “MESC+” of the European Commission
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel ferrocene-containing amphiphilic block copolymer nanoparticles as high-capacity charge carriers in aqueous redox flow systems

  • Fernández-Benito, Amparo
  • Rivera-Gálvez, Francisco J.
  • Cisneros-Ruiz, P.
  • Sanz-Horta, Raúl
  • Jasso-Gastinel, Carlos F.
  • López-Manchado, Miguel A.
  • Carretero-González, Javier
Size-exclusion polymer electrolytes are promising charge carriers to diminish the crossover and allowing commercially available low-cost porous membranes in redox flow batteries. Boosting the solubility in water and maximizing the number of redox sites to enhance the capacity of these polymeric systems is challenging. New highly water dispersed amphiphilic diblock copolymers are reported here, with an average concentration value of 1.7 10 mmol of Ferrocene (Fc)-linked moieties per mg of polymer, determined by total X-ray reflection fluorescence. These redox amphiphilic block copolymers are stabilized in water as spherical nanoparticles (20 nm) by using a simple phase solvent inversion procedure. We evidence a maximum polymer dispersibility value of 6 g/L in water, for long-term stable polymer nanoparticle suspensions, yielding a theoretical capacity value of 4.78 mAh at 10.5 mM Fc. Further adjustment of the ionic conductivity and pH of these stable redox block copolymer suspensions has rendered a conductivity value of 44.5 mS/cm at pH values close to a neutral one, by adding a variety of salt supports. Studies using a 3-electrode configuration cell reveal an efficient charge transport between each of the Fc motifs in the polymer nanoparticle. A capacity value of 3.1 mAh with no transient of the polymer nanoparticles crosswise the cheap porous membrane is evidenced when cycled as polycatholyte material in a Zn hybrid aqueous redox flow battery. The particle size and electronic changes of these novel amphiphilic redox block copolymer electrolytes during consecutive redox cycles have also been monitored by dynamic light scattering and ultraviolet-visible spectroscopy, respectively. The analysis of the results enables the understanding of the main mechanisms behind their non-fully reversible capacity. Among them, aggregation and sedimentation, along with retention inside the graphite felt electrode acting the latter as a filter. These insights will aid the design of future polymer electrolyte materials and redox flow battery components with better performance and cost., JCG acknowledge support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Ramon y Cajal Fellowship (RYC-2015-17722) and the Retos Project (MAT2017-86796-R, AEI/FEDER/UE). AFB acknowledges support from the General Office of Research and Innovation (Regional Ministry of Education and Research from Madrid Community) through Industrial PhD fellowship (ind2018/ind-9882). PCR want to thanks to Spanish Research Council (CSIC) through a JAE-Intro Fellowship (JAEINT20_EX_0780). The authors acknowledge access to the CNBeCSIC for the access to the CryoEM facility, and in particular to Rocío Arranz for her assistance. The authors would also like to thank the Biomaterials Group from the ICTP (CSIC) for the access to the DLS and Nanodrop equipments. The authors are also grateful for the assistance of the ICTP mechanical and electrical unit. This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTIþ) Transicion Energetica Sostenibleþ (PTI-TRANSENERþ) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded bythe Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094., Peer reviewed