DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Cellulose nanocrystal-derived carbon electrodes for sustainable potassium-ion charge storage systems
We have here produced carbon electrode materials derived from Crystalline NanoCellulose (CNC) for low-cost potassium-ion based energy storage systems through conventional annealing as well as through a fast and energy efficient microwave assisted carbonization process. A two-step 4-minute synthesis with ZnCl activation in a domestic microwave leads to a micro/mesoporous carbon with high surface area (S∼1800 m g). These CNC-derived carbons, if assessed in symmetric supercapacitor C/C cells cycled with 0.5 M KSO aqueous electrolyte, show reversible capacitance values up to 66 F g at current densities of 5 A g, retaining 83% of its initial capacitance after 10.000 cycles without any conducting additive. Due to its large electrochemical window of 1.7 V, a competitive energy density for an aqueous system of 20.9 W h kg is achieved. A hybrid aqueous capacitor built with this carbon as negative electrode and coupled with a Prussian White as positive results in cell capacitance values up to 135 F g under a voltage operation window of 1.8 V in 0.5 M KSO. On the other hand, non-activated carbons produced through a 2.25 hour thermal annealing at 900 °C, present much lower surface area (S∼450 m g), most of it due to its high micropore volume. This low external and mesoporous surface area carbon is a competitive anode material for potassium-ion batteries with a reversible capacity of ∼200 mA h g cycled at 28 mA g using 3.9 M KFSI in DME electrolyte (favourably most of it below 1 V vs K/K) in a potassium half-cell with >80% retention in 100 cycles. The present research shows that sustainable CNC derived carbons produced through energy efficient methods are competitive electrode materials in low-cost K based energy storge systems., The authors thank the X-ray diffraction unit (at the XRD CAI at UCM)
for assistance with PXRD data collection and Pedro Gonz´alez P´erez at
ICTP. Dr. Adrián Gómez is acknowledged for TEM data collection at the
National Centre for Electron Microscopy (CNME) and José David Gómez
Varga for SEM characterization at the ICTP; Isabel Muñoz Ochando and
Esperanza Benito Cano are also acknowledged for their assistance with
Raman spectroscopy and thermogravimetric analysis, respectively. The
authors are also grateful for the assistance of the ICTP mechanical and
electrical unit, as well as UCM mechanical and glass workshops. Funding
is acknowledged from Comunidad de Madrid “Doctorado Industrial”
program IND2019/17083. Grants PCI2022-133005, PCI2022-133010,
funded by MCIN/AEI/10.13039/501100011033 of Spain and, by the
European Union PRTR funding through projects are also acknowledged.