Pasar al contenido principal

INTEGRACION DEL CRECIMIENTO DE GRAFENO EN LA TECNOLOGIA DE SEMICONDUCTORES COMPUESTOS

MAT2015-67021-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exceptionally large migration length of carbon and topographically-facilitated self-limiting molecular beam epitaxial growth of graphene on hexagonal boron nitride

  • Plaut, Annette S.
  • Wurstbauer, Ulrich
  • Wang, Sheng
  • Levy, Antonio L.
  • Wang, Lei
  • Pfeiffer, Loren N.
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Dean, Cory R.
  • Hone, James
  • Pinczuk, Aron
  • García Martínez, Jorge Manuel
We demonstrate growth of single-layer graphene (SLG) on hexagonal boron nitride (h-BN) by molecular beam epitaxy (MBE), only limited in area by the finite size of the h-BN flakes. Using atomic force microscopy and micro-Raman spectroscopy, we show that for growth over a wide range of temperatures (500 C e 1000 C) the deposited carbon atoms spill off the edge of the h-BN flakes. We attribute this spillage to the very high mobility of the carbon atoms on the BN basal plane, consistent with van der Waals MBE. The h-BN flakes vary in size from 30 mm to 100 mm, thus demonstrating that the migration length of carbon atoms on h-BN is greater than 100 mm. When sufficient carbon is supplied to compensate for this loss, which is largely due to this fast migration of the carbon atoms to and off the edges of the h-BN flake, we find that the best growth temperature for MBE SLG on h-BN is ~950 C. Selflimiting graphene growth appears to be facilitated by topographic h-BN surface features: We have thereby grown MBE self-limited SLG on an h-BN ridge. This opens up future avenues for precisely tailored fabrication of nano- and hetero-structures on pre-patterned h-BN surfaces for device applications., This work is supported by ONR (N000140610138 and Graphene MURI), AFOSR (FA9550-11-1-0010), EFRC Center for Re-Defining Photovoltaic Efficiency through Molecule Scale Control (award DE-SC0001085), NSF (CHE-0641523), NYSTAR and Spanish Government (AIC-B-2011-0806, MAT2014-54231, MAT2015-67021-R). S.W. and A.P. were supported by the US Department of Energy Office of Science, Division of Materials Science and Engineering (award DE-SC0010695)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scanning tunneling spectroscopic monitoring of surface states role on water passivation of InGaAs uncapped quantum dots

  • Milla, María José
  • Hernández-Rodríguez, Irene
  • Méndez, Javier
  • García Martínez, Jorge Manuel
  • Ulloa, José M.
  • Guzmán, Álvaro
A detailed local analysis of the impact of water coverage on the density of surface states in In0.5Ga0.5As surface nanostructures is reported by spectroscopy monitoring the surface conductivity at the nanometer-scale. A correlation between the changes of the surface conductivity and the variation of the density of surface states under different environmental conditions is found in terms of I–V characteristics and scanning tunneling spectroscopy. From dry to humid conditions the surface conductivity of a three-dimensional In0.5Ga0.5As uncapped nanostructured surface increases monotonically with the reduction of the density of available surface states. In contrast, neither the electrical properties nor the density of electrically active surface states of a surface quantum well exhibit any significant dependence on the external moist conditions. The adsorption of water molecules onto the surface passivates the surface states leading to an improvement in the electron transport. These results clearly reveal that the density of surface states depends on the dimensionality of a nanostructured surface and demonstrate the important role of these states for nanoengineering sensing devices., This work has been supported by the following projects: MAT2011-26534, MAT2014-54231-C4-1-P, AIC-B-2011-0806, MAT2015-67021-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum

  • Fuster, David
  • Anacleto, Pedro
  • Virtuoso, Jose
  • Zutter, Marco
  • Brito, Daniel
  • Alves, Marina
  • Aparicio, Luis
  • Fuertes Marrón, D.
  • Briones Fernández-Pola, Fernando
  • Sadewasser, Sascha
  • García Martínez, Jorge Manuel
We present the development of a small foot-print physical vapor deposition (PVD) system for in-situ deposition of all layers required in a complete Cu(In,Ga)Se (CIGS) solar cell. Seven sputtering magnetrons and one valved-cracker source have been custom designed and manufactured for this system, named SpuTtering for Advanced Research (STAR). The purpose of STAR is to develop a technique to fabricate a complete CIGS solar cell, including contacts, absorber, buffer, and window layers, under high vacuum with the aim to transfer this technology to a future industrial production line. The system's capabilities and its relatively high throughput place it somewhere in between research and industrial development levels. It is possible to work on the deposition of the back contact, the CIGS absorber, and the window layer of three solar cells simultaneously. Calibration data, selection of parameters for the deposition of the individual layers, and initial results of a complete CIGS solar cell developed with STAR are reported., We acknowledge financial support by the Spanish projects AIC-B-2011-0806 and MAT2015-67021-R, and by the “Micro-concentrator thin film solar cells (MiconCell)” project (028922), and the “Correlated Analysis of Inorganic Solar Cells in and outside an Electron Microscope (CASOLEM)” project (028917), both co-funded by FCT and the ERDF through COMPETE2020. We also acknowledge financial support by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Comunidad de Madrid (P2018/EMT-4308). We acknowledge the services at IMN-CNM from the X-SEM Laboratory (MINECO CSIC13-4E-1794) and from MiNa Laboratory (funding from CM under project S2013/ICE-2822, Space-Tec) both with support from EU (FEDER, FSE)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of a carbon evaporator cell for MBE growth

  • Fuster, David
  • González Díez, Yolanda
  • González Sotos, Luisa
  • Méndez, Javier
  • García, F.
  • Córdoba-Cabanillas, J. L.
  • Dotor-Castilla, María Luisa
  • Álvaro Bruna, Raquel
  • Torné, Lorena
  • García Martínez, Jorge Manuel
A new design of carbon source using a S-shaped glassy carbon filament for p-doping and carbon deposition is presented. Due to the higher resistivity of the glassy carbon, lower current is needed to produce the same flux as in a source based on pyrolytic graphite filament. The source design is very compact and the use of water cooling is not mandatory. The results and simulations of the new design show a higher flux than the previously reported glassy carbon based source while avoiding hot spots that can cause an early filament degradation. Hole mobility vs doping level relation data on p-doped GaAs layers grown by molecular beam epitaxy using this new carbon source are shown. With this new C source GaAs (001) surface morphology flatness is preserved after depositing C, showing a reduced substrate heating radiation essential for operate in III-V solid source molecular beam epitaxy (MBE) systems., The authors wish to acknowledge the financial support by the Spanish MINECO (MAT2015-67021-R), by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and by Comunidad de Madrid (P2018/EMT-4308). We acknowledge the service from the MiNa Laboratory at IMN, funding from CM (project S2018/NMT-4291 TEC2SPACE), and from the X-SEM Laboratory, funding from MINECO (project CSIC13-4E-1794), both with support from EU (ERDF, ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spherical gallium nanodroplets

  • García Martínez, Jorge Manuel
  • Fuster, David
  • Dotor-Castilla, María Luisa
  • Méndez, Javier
  • González Díez, Yolanda
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Gallium (Ga) nanoparticles has unique characteristics that could enable new devices based on phase changes, such as optical switches and memories and active plasmonic platforms [1]. Gallium is also a very interesting material for its biocompatibility properties and many other applications [2]. We show the fabrication by MBE of gallium nanodroplets on GaAs(001) by droplet epitaxy [3, 4]. Furthermore, it is possible to control the shape of the nanodroplets by changing the wettability of Ga over the surface by evaporation of one monolayer of carbon [3] prior to the droplet formation. This effect is used for obtaining almost perfectly spherical Ga nanodroplets on GaAs and could be used in many other substrates. We acknowledge the following projects: MAT2015-67021-R, S2018/NMT-4291 TEC2SPACE, CSIC13- 4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308. References [1] Maria Losurdo, et al., ¿Thermally stable coexistence of liquid and solid phases in gallium nanoparticles¿, Nature Mat., Vol. 15, pp. 995-1002, 2016. [2] Michael D. Dickey, ¿Liquid metals at room temperature¿, Physics Today Vol. 74, 4, pp. 30- 36, 2021. [3] D. Fuster et al., ¿Optimization of a carbon evaporator cell for MBE growth¿, Vacuum, Vol. 181, pp. 109653(1)-109653(8), 2020. [4] D. Fuster, et al., ¿Fundamental role of arsenic flux in nanohole formation by Ga droplet etching on GaAs (001),¿ Nanoscale Res Lett. Vol. 9, pp. 309(1)-309(6), 2014., Service from the MiNa Laboratory at IMN (funding from CM), X-SEM Laboratory and funding projects MAT2015-67021-R, S2018/NMT-4291, TEC2SPACE, CSIC13-4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308