Pasar al contenido principal

CELULA SOLAR DE TRANSISTOR BIPOLAR HETEROUNION CON RESISTENCIA SERIE MINIMIZADA Y ACOPLAMIENTO OPTICO

RTI2018-096937-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José M.
  • Chemisana Villegas, Daniel
  • Llorens, José M.
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort., We gratefully acknowledge the scientific and technical input from Dr. J. Buencuerpo. This work would have not been possible without the data and computing resources made publicly available by NREL as part of the NSRDB. Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program (RYC-2014-15621).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José María
  • Chemisana, Daniel
  • Llorens Montolio, José Manuel
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort.Energy Resources; Energy Management; Energy Systems, Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE ( ENE2017-91092-EXP , RTI2018-096937-B-C22 , RYC-2017-21995 ) and Comunidad de Madrid ( P2018/EMT-4308 ). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program ( RYC-2014-15621 ).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

System for manufacturing complete Cu(In,Ga)Se2 solar cells in situ under vacuum

  • Fuster, David
  • Anacleto, Pedro
  • Virtuoso, Jose
  • Zutter, Marco
  • Brito, Daniel
  • Alves, Marina
  • Aparicio, Luis
  • Fuertes Marrón, D.
  • Briones Fernández-Pola, Fernando
  • Sadewasser, Sascha
  • García Martínez, Jorge Manuel
We present the development of a small foot-print physical vapor deposition (PVD) system for in-situ deposition of all layers required in a complete Cu(In,Ga)Se (CIGS) solar cell. Seven sputtering magnetrons and one valved-cracker source have been custom designed and manufactured for this system, named SpuTtering for Advanced Research (STAR). The purpose of STAR is to develop a technique to fabricate a complete CIGS solar cell, including contacts, absorber, buffer, and window layers, under high vacuum with the aim to transfer this technology to a future industrial production line. The system's capabilities and its relatively high throughput place it somewhere in between research and industrial development levels. It is possible to work on the deposition of the back contact, the CIGS absorber, and the window layer of three solar cells simultaneously. Calibration data, selection of parameters for the deposition of the individual layers, and initial results of a complete CIGS solar cell developed with STAR are reported., We acknowledge financial support by the Spanish projects AIC-B-2011-0806 and MAT2015-67021-R, and by the “Micro-concentrator thin film solar cells (MiconCell)” project (028922), and the “Correlated Analysis of Inorganic Solar Cells in and outside an Electron Microscope (CASOLEM)” project (028917), both co-funded by FCT and the ERDF through COMPETE2020. We also acknowledge financial support by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Comunidad de Madrid (P2018/EMT-4308). We acknowledge the services at IMN-CNM from the X-SEM Laboratory (MINECO CSIC13-4E-1794) and from MiNa Laboratory (funding from CM under project S2013/ICE-2822, Space-Tec) both with support from EU (FEDER, FSE)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of a carbon evaporator cell for MBE growth

  • Fuster, David
  • González Díez, Yolanda
  • González Sotos, Luisa
  • Méndez, Javier
  • García, F.
  • Córdoba-Cabanillas, J. L.
  • Dotor-Castilla, María Luisa
  • Álvaro Bruna, Raquel
  • Torné, Lorena
  • García Martínez, Jorge Manuel
A new design of carbon source using a S-shaped glassy carbon filament for p-doping and carbon deposition is presented. Due to the higher resistivity of the glassy carbon, lower current is needed to produce the same flux as in a source based on pyrolytic graphite filament. The source design is very compact and the use of water cooling is not mandatory. The results and simulations of the new design show a higher flux than the previously reported glassy carbon based source while avoiding hot spots that can cause an early filament degradation. Hole mobility vs doping level relation data on p-doped GaAs layers grown by molecular beam epitaxy using this new carbon source are shown. With this new C source GaAs (001) surface morphology flatness is preserved after depositing C, showing a reduced substrate heating radiation essential for operate in III-V solid source molecular beam epitaxy (MBE) systems., The authors wish to acknowledge the financial support by the Spanish MINECO (MAT2015-67021-R), by MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22) and by Comunidad de Madrid (P2018/EMT-4308). We acknowledge the service from the MiNa Laboratory at IMN, funding from CM (project S2018/NMT-4291 TEC2SPACE), and from the X-SEM Laboratory, funding from MINECO (project CSIC13-4E-1794), both with support from EU (ERDF, ESF).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering the reciprocal space for ultrathin GaAs solar cells

  • Buencuerpo, Jerónimo
  • Llorens Montolio, José Manuel
  • Ripalda, José María
  • Steiner, Myles A.
  • Tamboli, Adele C.
III-V solar cells dominate the high efficiency charts, but with significantly higher cost than other solar cells. Ultrathin III-V solar cells can exhibit lower production costs and immunity to short carrier diffusion lengths caused by radiation damage, dislocations, or native defects. Nevertheless, solving the incomplete optical absorption of sub-micron layers presents a challenge for light-trapping structures. Simple photonic crystals have high diffractive efficiencies, which are excellent for narrow-band applications. Random structures offer a broadband response instead but suffer from low diffraction efficiencies. Quasirandom (hyperuniform) structures lie in between, providing high diffractive efficiency over a target wavelength range, which is broader than simple photonic crystals, but narrower than a random structure. In this work, we present a design method to evolve a simple photonic crystal into a quasirandom structure by modifying the spatial-Fourier space in a controlled manner. We apply these structures to an ultrathin GaAs solar cell of only 100 nm. We predict a photocurrent for the tested quasirandom structure of 25.3 mA/cm, while a planar structure would be limited to 16.1 mA/cm. The modified spatial-Fourier space in the quasirandom structure increases the amount of resonances, with a progression from discrete number of peaks to a continuum in the absorption. The enhancement in photocurrent is stable under angle variations because of this continuum. We also explore the robustness against changes in the real-space distribution of the quasirandom structures using different numerical seeds, simulating variations in a self-assembly method. We observe a standard deviation of the quasirandom structures of only 0.3 mA/cm. The approach presented here can be applied to guide future optimizations and experimental design and fabrication of new classes of photonic crystals for GaAs and other ultrathin solar cells., This work was supported by the U.S. Department of Energy under Contract No. DE-AC36-08GO28308 with Alliance for Sustainable Energy, LLC, the Manager and Operator of the National Renewable Energy Laboratory. Funding provided by U.S. Department of Energy Efficiency and Renewable Energy Solar Energy Technologies Office under Agreement Numbers 34911 and 34358. This research was performed using computational resources sponsored by the Department of Energy’s Office of Energy Efficiency and Renewable Energy and located at the National Renewable Energy Laboratory. The U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U.S. Government purposes. JML acknowledges the financial support of Spanish MINECO (RYC-2017–21995) and the European Union FSE. JMR acknowledges support by MCINN (ENE2017-91092-EXP, RTI2018-096937-B-C22) and Com. Mad. (P2018/EMT-4308).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light absorption enhancement and radiation hardening for triple junction solar cell through bioinspired nanostructures

  • Vasileiou, Thomas
  • Llorens Montolio, José Manuel
  • Buencuerpo, Jerónimo
  • Ripalda, José María
  • Izzo, Dario
  • Summerer, Leopold
Multi-junction solar cells constitute the main source of power for space applications. However, exposure of solar cells to the space radiation environment significantly degrades their performance across the mission lifetime. Here, we seek to improve the radiation hardness of the triple junction solar cell, GaInP/Ga(In)As/Ge, by decreasing the thickness of the more sensitive middle junction. Thin junctions facilitate the collection of minority carriers and show slower degradation due to defects. However, thinning the junction decreases the absorption, and consequently, the expected photocurrent. To compensate for this loss, we examined two bioinspired surface patterns that exhibit anti-reflective and light-trapping properties: (a) the moth-eye structure which enables vision in poorly illuminated environments and (b) the patterns of the hard cell of a unicellular photosynthetic micro-alga, the diatoms. We parametrize and optimize the biomimetic structures, aiming to maximize the absorbed light by the solar cell while achieving significant reduction in the middle junction thickness. The density of the radiation-induced defects is independent of the junction thickness, as we demonstrate using Monte Carlo simulations, allowing the direct comparison of different combinations of middle junction thicknesses and light trapping structures. We incorporate the radiation effects into the solar cell model as a decrease in minority carrier lifetime and an increase in surface recombination velocity, and we quantify the gain in efficiency for different combinations of junction thickness and the light-trapping structure at equal radiation damage. Solar cells with thin junctions compensated by the light-trapping structures offer a promising approach to improve solar cell radiation hardness and robustness, with up to 2% higher end-of-life efficiency than the commonly used configuration at high radiation exposure., Funding was provided by the Spanish Government and the European Union through AEIFEDER-UE (ENE2017-91092-EXP, RTI2018-096937- B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoinduced Charge Transfer and Trapping on Single Gold Metal Nanoparticles on TiO2

  • Luna, Mónica
  • Barawi, Mariam
  • Gómez-Moñivas, Sacha
  • Colchero, Jaime
  • Rodríguez-Peña, Micaela
  • Yang, Shanshan
  • Zhao, Xiao
  • Lu, Yi-Hsien
  • Chintala, Ravi
  • Reñones, Patricia
  • Altoe, Virginia
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Kawasaki, Seiji
  • Weber-Bargioni, Alexander
  • Peña O'Shea, Víctor A. de la
  • Yang, Peidong
  • Ashby, Paul D.
  • Salmerón, Miquel
We present a study of the effect of gold nanoparticles (Au NPs) on TiO2 on charge generation and trapping during illumination with photons of energy larger than the substrate band gap. We used a novel characterization technique, photoassisted Kelvin probe force microscopy, to study the process at the single Au NP level. We found that the photoinduced electron transfer from TiO2 to the Au NP increases logarithmically with light intensity due to the combined contribution of electron-hole pair generation in the space charge region in the TiO2-air interface and in the metal-semiconductor junction. Our measurements on single particles provide direct evidence for electron trapping that hinders electron-hole recombination, a key factor in the enhancement of photo(electro)catalytic activity., This work was supported by the Office of Basic Energy Sciences (BES) of the U.S. Department of Energy (DOE) under contract DE-AC02-05CH11231 through the Structure and Dynamics of Materials Interfaces Program (FWP KC31SM) and the Molecular Foundry. M.L. acknowledges funds from Comunidad de Madrid (P2018/EMT-4308), a Fulbright grant PRX16/00564, and the MCIU-AEI-FEDERUE (RTI2018-096937-B-C22 and MAT2014-59772-C2-1-P). J.C. acknowledges financial support from Ministerio de Ciencia e Innovación (MICINN) and the European Union through the project PID2019-104272RB-C52. Also, Y.H. acknowledges financial support from MCIU through MAT2014-59772-C2-2- P and L.M. from EC through ERC-2013-SYG-610256. V.A.P.O. and M.B. acknowledge the financial support from EC through ERC CoG HyMAP 648319, MINECO PID2019- 106315RB-I00 and ENE2017-89170-R, ″Comunidad de Madrid″ and European Structural Funds (FotoArt-CM project S2018/NMT-4367) and Fundación Ramón Areces (Art-Leaf project). M.B. also thanks the Juan de la Cierva Incorporación contract (IJC2019042430-I). X.Z. was supported by the NSF-BSF 359 grant number 1906014. The authors thank Prof. Eran Edri, María Ujué González Sagardoy, and Judit Meseguer- Oliver for fruitful discussions and Asylum customer support for help with modifications of the AFM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spherical gallium nanodroplets

  • García Martínez, Jorge Manuel
  • Fuster, David
  • Dotor-Castilla, María Luisa
  • Méndez, Javier
  • González Díez, Yolanda
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Gallium (Ga) nanoparticles has unique characteristics that could enable new devices based on phase changes, such as optical switches and memories and active plasmonic platforms [1]. Gallium is also a very interesting material for its biocompatibility properties and many other applications [2]. We show the fabrication by MBE of gallium nanodroplets on GaAs(001) by droplet epitaxy [3, 4]. Furthermore, it is possible to control the shape of the nanodroplets by changing the wettability of Ga over the surface by evaporation of one monolayer of carbon [3] prior to the droplet formation. This effect is used for obtaining almost perfectly spherical Ga nanodroplets on GaAs and could be used in many other substrates. We acknowledge the following projects: MAT2015-67021-R, S2018/NMT-4291 TEC2SPACE, CSIC13- 4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308. References [1] Maria Losurdo, et al., ¿Thermally stable coexistence of liquid and solid phases in gallium nanoparticles¿, Nature Mat., Vol. 15, pp. 995-1002, 2016. [2] Michael D. Dickey, ¿Liquid metals at room temperature¿, Physics Today Vol. 74, 4, pp. 30- 36, 2021. [3] D. Fuster et al., ¿Optimization of a carbon evaporator cell for MBE growth¿, Vacuum, Vol. 181, pp. 109653(1)-109653(8), 2020. [4] D. Fuster, et al., ¿Fundamental role of arsenic flux in nanohole formation by Ga droplet etching on GaAs (001),¿ Nanoscale Res Lett. Vol. 9, pp. 309(1)-309(6), 2014., Service from the MiNa Laboratory at IMN (funding from CM), X-SEM Laboratory and funding projects MAT2015-67021-R, S2018/NMT-4291, TEC2SPACE, CSIC13-4E-1794, RTI2018-096937-B-C22, PID2021-124193OB-C22 and P2018/EMT-4308
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

First stages development of (GaAs)1¿x(Ge2)x alloy by MBE

  • Caño, P.
  • Navarro, Enrique
  • Gonzalo Martín, Alicia
  • González Díez, Yolanda
  • Ripalda, José María
Trabajo presentado en el 21st European Workshop on Molecular Beam Epitaxy (EuroMBE 2023), celebrado en Madrid (España), del 16 al 19 de abril de 2023, Abstract Semiconductor alloys formed by group-IV elements and III-V compounds, such us ternary metastable (GaAs)1-x(Ge2)x alloy remain mostly unexplored. In this alloy, obtaining good quality material is still challenging, because, although GaAs and Ge are almost lattice matched, they are mutually insoluble, having a thermodynamic tendency to complete phase separation at all temperatures below the melting point [1]. Nevertheless, metastable (GaAs)1-x(Ge2)x alloys with direct bandgaps energies between 0.4 and 1.4 eV have been previously obtained [2-5]. In this work, results of (GaAs)1-x(Ge2)x alloys pseudomorphically grown on GaAs (001) substrates by Molecular Beam Epitaxy (MBE) will be shown. The Ge contents pursued in our experiments are from 6% to 33% in the search of a 1 eV bandgap-alloy lattice matched to GaAs, potentially useful for visible-IR light optoelectronic devices, including tandem solar cells. With the aim of obtaining good structural and optical quality (GaAs)1-x(Ge2)x homogeneous layers, different MBE growth conditions have been explored. In this way, growth temperature (500ºC - 550ºC), V/III (1.5 - 4) beam flux ratio. The composition of the alloys has been determined from a combination of x-ray photoelectron spectroscopy (XPS), secondary ion mass spectroscopy (SIMS) and energy dispersive x-ray spectroscopy (EDX). Besides Ge content of the alloys, III:V ratios from 0.96 to 1.07 are obtained, suggesting Ge incorporation disrupts the MBE self-limiting incorporation mechanism of group V element. High-resolution x-ray diffraction (HRXRD) measurements around GaAs (004) reflection, where interference fringes are clearly seen, show high-quality alloys pseudomorphically grown to GaAs substrate. Electrical behavior and surface flatness were studied by Hall and atomic force microscopy characterization respectively. Photoluminescence (PL) preliminary results have shown surprisingly high PL emission at different temperatures with no noticeable shoulders. The samples grown at higher temperatures have shown more intense PL. References [1] R. Osorio et al. ¿Structural phase transition in (GaAs)1-x(Ge2)x and (GaP)1-x(Si2)x ¿alloys: Test of the bulk thermodynamic description,¿ Phys. Rev. B, vol. 43, pp.14055-14072, 1991. [2] S. A. Barnett et.al., ¿Growth and optical properties of single-crystal metastable (GaAs)1-xGex alloys,¿ Electronic Letters, vol. 18, pp. 891-982, 1982. [3] L. T. Romano et.al, ¿Domain structure in epitaxial metastable zinc-blende (GaAs)1-x(Ge2)x (001) alloys,¿ Physical Review B, vol. 36, 14, 1987. [4] R. J. Baird et.al., ¿Ge/GaAs alloys grown by MBE,¿ J. Appl. Phys., vol. 69, pp. 226-236, 1991. [5] R. Jia, et.al., ¿Luminescence of III-IV-V thin film alloys grown by metalorganic chemical vapor deposition,¿ Journal of Applied Physics, 123, 175101, 2018., Funding was provided by the Spanish Government and the European Union through MCIUAEI- FEDER-UE (RTI2018-096937-B-C22, and PID2021-124193OB-C22) and Comunidad de Madrid (P2018/EMT-4308).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Location-Specific Spectral and Thermal Effects in Tracking and Fixed Tilt Photovoltaic Systems

  • Ripalda, José M.
  • Chemisana Villegas, Daniel
  • Llorens, José M.
  • García, Iván
The efficiency of photovoltaic modules in the field is generally lower than the efficiency under standard testing conditions due to temperature and spectral effects. Using the latest spectral dataset available from the National Solar Radiation Database, we report spectral correction factors ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. We find that spectral effects favor trackers if silicon modules are used, but favor a fixed tilt instead if perovskites or CdTe are used. In high-irradiance locations, the energy yield advantage of silicon-based trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far outweighting the cost of the required research effort., We gratefully acknowledge the scientific and technical input from Dr. J. Buencuerpo. This work would have not been possible without the data and computing resources made publicly available by NREL as part of the NSRDB. Funding was provided by the Spanish Government and the European Union through MCIU-AEI-FEDER-UE (ENE2017-91092-EXP, RTI2018-096937-B-C22, RYC-2017-21995) and Comunidad de Madrid (P2018/EMT-4308). D.C. thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)" for the ICREA Acadèmia award. I.G. is funded by Ministerio de Economía y Competitividad through the Ramón y Cajal program (RYC-2014-15621).