Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Recyclable Cu-MOF-74 Catalyst for the Ligand-Free O-Arylation Reaction of 4-Nitrobenzaldehyde and Phenol

  • Leo, Pedro
  • Orcajo, Gisela
  • Briones, David
  • Calleja, Guillermo
  • Sánchez Sánchez, Manuel
  • Martínez, Fernando
The activity and recyclability of Cu-MOF-74 as a catalyst was studied for the ligand-free C–O cross-coupling reaction of 4-nitrobenzaldehyde (NB) with phenol (Ph) to form 4-formyldiphenyl ether (FDE). Cu-MOF-74 is characterized by having unsaturated copper sites in a highly porous metal-organic framework. The influence of solvent, reaction temperature, NB/Ph ratio, catalyst concentration, and basic agent (type and concentration) were evaluated. High conversions were achieved at 120 °C, 5 mol % of catalyst, NB/Ph ratio of 1:2, DMF as solvent, and 1 equivalent of K<sub>2</sub>CO<sub>3</sub> base. The activity of Cu-MOF-74 material was higher than other ligand-free copper catalytic systems tested in this study. This catalyst was easily separated and reused in five successive runs, achieving a remarkable performance without significant porous framework degradation. The leaching of copper species in the reaction medium was negligible. The O-arylation between NB and Ph took place only in the presence of Cu-MOF-74 material, being negligible without the solid catalyst. The catalytic advantages of using nanostructured Cu-MOF-74 catalyst were also proven., The authors wish to thank Spanish Ministry of Science and Innovation for the financial support to the CICYT Project (CTQ2015-64526-P). MSS acknowledges AEI and FEDER the financial support through the Project MAT2016-77496-R (AEI/FEDER, UE)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of framework topology of SAPO catalysts on selectivity and deactivation profile in the methanol-to-olefins reaction

  • Pinilla-Herrero, Irene
  • Olsbye, Unni
  • Márquez Álvarez, Carlos
  • Sastre, Enrique
Catalytic performance in the methanol-to-olefins reaction was studied on four 8-ring silicoaluminophosphate (SAPO) molecular sieves with different framework topologies and cavity-windows of various dimensions: SAPO-35 (LEV), SAPO-56 (AFX), STA-7 (SAV), and SAPO-42 (LTA). The four catalysts were compared with the widely investigated SAPO-34 (CHA) and showed remarkable differences in lifetime and products selectivity. In particular, the STA-7 catalyst gave higher selectivity to C3–C4 olefins, while it had methanol conversion capacity similar to that of a SAPO-34 catalyst with similar crystal size and acidity. Organic species retained in the cavities of partially deactivated catalysts were analyzed at different times on stream. The changes in composition of trapped compounds were correlated with those of the effluent products to elucidate the reaction mechanism and the deactivation pathway. The differences in effluent product distribution and trapped coke species suggest that framework topology has a great influence not only on the stability of the materials but also on the products distribution., This work has been financed partially by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through Projects MAT2016-77496-R (AEI/FEDER, UE). IPH acknowledges CSIC for a Ph.D. grant and partial funding of the stay in the University of Oslo. The Molecular Sieves Group (ICP-CSIC) and Catalysis Group (UiO) are also acknowledged for financial support of the stay., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complex relationship between SAPO framework topology, content and distribution of Si and catalytic behaviour in the MTO reaction

  • Pinilla-Herrero, Irene
  • Márquez Álvarez, Carlos
  • Sastre, Enrique
Three small-pore silicoaluminophosphates containing relatively large cavities in their structure (LEV, LTA and SAV) have been hydrothermally synthesized with various silicon concentrations. The effect of silicon content and distribution on both the physicochemical and catalytic properties of the SAPO molecular sieves was studied. Remarkable differences in Si incorporation were found, showing that the topological features and the structure directing agent employed in each case play an important role, controlling not just the Si location in the framework but also the amount of Si incorporated. In all the cases, the formation of Si islands, which are associated with stronger acid sites, was favoured by the use of higher concentrations of the Si source in the synthesis gel. However, it has been found that the framework topology can have a greater influence than acidity on the catalytic behaviour of SAPO materials in the MTO transformation., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct synthesis of bulk AlPON basic catalysts in ionic liquids

  • Saugar Fernández, Ana Isabel
  • Márquez Álvarez, Carlos
  • Pérez-Pariente, Joaquín
In this work, the direct synthesis of materials formed by a network of Al, P, N and O atoms (AlPON) from the ammonolysis of P and N molecular precursors in an ionic liquid is reported. The as-made samples can be treated under ammonia at high temperature to remove the ionic liquid retained after synthesis. The resulting amorphous materials have high porosity and surface area. The P atoms of the skeleton are involved in single and double bonds with N atoms, whereas bridged NH and terminal P-NH2 groups are also present. However, no evidence for AlN bonds has been found. It has been shown by pyrrole adsorption that these materials exhibit basic properties, showing a basic strength higher than that of SiN materials, but weaker than hydrotalcites. Nevertheless, they are active and very selective catalysts for the Michael addition reaction between malononitrile and chalcone., This work has been partially financed through Projects MAT2012-31127 (MINECO) and MAT2016-77496-R (AEI/FEDER, UE). A. Saugar also acknowledges support from the CSIC JAE-Predoc program co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled growth of nano-hydroxyapatite on stilbite: Defluoridation performance

  • Sani, Taju
  • Gómez-Hortigüela Sainz, Luis
  • Mayoral, Álvaro
  • Chebude, Yonas
  • Pérez-Pariente, Joaquín
  • Díaz Carretero, Isabel
In Ethiopia, fluoride-contaminated groundwater used for drinking has become a matter of great concern, particularly in the Rift Valley region, due to its serious health hazard (fluorosis). In this work, we present a systematic study related to the optimization of the synthesis of a composite material having a high defluoridation capacity, consisting of nanohydroxyapatite crystals growth on the external surface of a natural Stilbite zeolite (nHAST) of sizes between 74 and 105 μm. In order to control the growth of significantly small crystals of hydroxyapatite with higher fluoride removal capacity, the most important synthesis parameters, crystallization pH and crystallization time, have been carefully optimized. The obtained materials have been characterized by X-Ray Diffraction, Elemental Analysis, Thermogravimetric Analysis, Infrared Spectroscopy, 31P Nuclear Magnetic Resonance, and Transmission Electron Microscopy; in addition, the defluoridation capacity of the materials has been determined. Interestingly, unlike most adsorbents, nHAST-144h (prepared after 144 h of crystallization) shows significantly high fluoride-removal efficiency in a wide range of pH with maximum F-removal of 86% and minimum of 79% fluoride removal at pH 3 and 10, respectively. Besides, nHAST-144h adsorbent maintains its high defluoridation capacity in the presence of other ions, in particular chloride, sulfate and bicarbonate. In a real situation, nHAST-144h was found to be efficient as well; from real groundwater from the Ethiopian Rift Valley, with a fluoride concentration of 8.2 mg/L and a dose of 10 g/L, nHAST-144h reduced the fluoride concentration down to 1.40 mg/L, below the limit established by World Health Organization (WHO)., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE) and the Spanish Ministry of Economy, Industry and Competitiveness (Project MAT2015-65767-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cs-Corrected STEM Imaging of both Pure and Silver-Supported Metal-Organic Framework MIL-100(Fe)

  • Mayoral, Álvaro
  • Mahugo, Rubén
  • Sánchez Sánchez, Manuel
  • Díaz Carretero, Isabel
Special Issue: Advanced Microscopy and Spectroscopy for Catalysis ., Metal-organic frameworks (MOFs) are a family of porous solids combining organic and inorganic moieties with tunable porosity. Their structural parameters have converted MOFs into suitable compounds for gas storage or drug delivery. However, despite the excellent crystallinity they tend to exhibit their analysis through transmission electron microscopy is extraordinarily complicated owing to the high instability under the electron beam irradiation. In here, high-resolution Cs-corrected STEM imaging was used for the observation of the building units of MIL-100(Fe), and special attention was paid to the electron beam current. In addition, MIL-100(Fe) was reacted with AgNO3 through a solid-state reaction technique, which resulted into the formation of metal nanoparticles on the surface. The incorporation of Ag into the porous network has been also investigated., AM acknowledges the Government of Aragon and the European Social Fund under the project grant number E/26 “Construyendo Europa desde Aragón” 2014–2020. This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through Project MAT2016-77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of zeolite A using raw kaolin from Ethiopia and its application in removal of Cr(III) from tannery wastewater

  • Ayele, Lijalem
  • Pérez, Eduardo
  • Mayoral, Álvaro
  • Chebude, Yonas
  • Díaz Carretero, Isabel
[Background] The commercial production of zeolite A mainly involves costly synthetic chemicals. However, cheaper raw materials such as clay minerals, coal ashes, natural zeolites, solid wastes and industrial sludge have been tested. Based on this, the objective of the present study is synthesis of zeolite A from two sources of raw kaolins (Ansho and Bombowha) from Ethiopia and evaluation of its application in tannery wastewater treatment., [Results] The synthesis result indicated high crystallinity (>90%) of zeolite A using Ansho kaolin. Lower grade Bombowha kaolin yielded zeolite A with crystallinity of 80%. In the tannery wastewater treatment study, a real sample having chromium concentration of 2036 mg L−1 was treated, obtaining 99.8% removal and about 200 mg g−1 adsorption capacity of Cr(III) using 100 g L−1 and 5 g L−1 adsorbent dose, respectively. This indicated that the synthesized zeolite A has great potential for Cr(III) removal from tannery wastewater., [Conclusion] In this study, zeolite A has been synthesized from two sources of kaolin from Ethiopia and has been evaluated in tannery wastewater treatment. The synthesis result indicated the formation of crystals of zeolite A with optimum crystallinity of 91% and the material exhibited chromium removal efficiency of 99.8%. © 2017 Society of Chemical Industry, This work has been funded through the Project MAT2016-77496-R (AEI/FEDER, UE). ID acknowledges the CSIC for a research leave at AAU. The Chemistry Department, Addis Ababa University is also acknowledged for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental uses of zeolites in Ethiopia

  • Díaz Carretero, Isabel
In the past six years we have been intensively collaborating with the Chemistry Department of Addis Ababa University as well as Haramaya University to bust scientific knowledge related to zeolites and zeolite applications. Initially, we teamed up with geologists and government actors in the mining sectors; as a result we got access to natural zeolites from the north of the country, as well as other industrial minerals such as kaolin. In parallel we developed research activities in the use of zeolites as adsorbents and in catalytic processes related to environmental applications of necessity in Ethiopia. In the first part of this paper I will describe two examples of adsorption processes using mineral resources: one is a natural stilbite used to develop an adsorbent to remove fluoride from drinking waters; and the second one uses virgin kaolin to prepare a synthetic zeolite 4A that we used to remove chromium from tannery wastewaters. Finally, two catalytic examples will be described: in the first one we tackled the photocatalytic degradation of dyes from textile industries using Ti-modified natural and synthetic zeolites, and in the second one we used modified mordenites, both natural and synthetic, for the conversion of glucose into 5-HMF., ID is grateful to CSIC for her research leave at AAU and HU. The Spanish Research Council CSIC I-COOP+-2014 (COOPB20082) is acknowledged for funding. This work has been (partially) funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE) and Project MAT2015-65767-P. Special thanks go to the members of the Molecular Sieves Group at ICP-CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nano-crystalline titanium(IV)tungstomolybdate cation exchanger: Synthesis, characterization and ion exchange properties

  • Kelta, Bezabih
  • Taddesse, Abi M.
  • Yadav, O. P.
  • Díaz Carretero, Isabel
  • Mayoral, Álvaro
Nano-titanium(IV)tungstomolybdate cation exchanger has been synthesized via homogenous precipitation approach. Synthesis parameters have been optimized to get the highest ion exchange capacity (IEC). The as-synthesized nanoexchanger has been fully characterized by XRD, XRF, TEM, STEM/HAADF/EDS, FTIR and BET. The titanium(IV)tungstomolybdate behaves as bifunctional and strong acid cation exchanger with IEC of 2.41 meq g−1 for Na+ions. Very high distribution coefficient values for Pb2+ (Kd = 10767 mL g−1) and Cr3+ (Kd = 11800 mL g−1) ions indicate that the exchanger can be used to selectively adsorb Pb2+ and Cr3+ ions from the waste containing other metal ions. The exchanger has also showed a promising affinity towards a radionuclide UO22+ (Kd = 7043 mL g−1 in 0.1 M DMSO). The distribution study of the exchanger in different solvent systems showed promising separation potential of the exchanger towards metal ions of analytical interest from a given mixture for toxic heavy metal ions., The financial support from the CSIC for Development (project COOPB20082), the Research and Extension Office of Haramaya University (HURG-2014-03-03) and Chemistry Department of HU are acknowledged. This work has been also (partially) funded by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe-Al-Mn ternary oxide nanosorbent: Synthesis, characterization and phosphate sorption property

  • Abebe, Buzuayehu
  • Taddesse, Abi M.
  • Kebede, Tesfahun
  • Teju, Endale
  • Díaz Carretero, Isabel
In the present work, nanocrystalline Fe-Al-Mn ternary oxide nanosorbent was synthesized via impregnation method. X-ray diffraction (XRD), scanning electron microscope coupled with energy dispersive x-ray spectroscopy (SEM/EDX), Brunauer–Emmett–Teller (BET) technique and Fourier transform infrared spectroscopy (FTIR) were employed to characterize the as-synthesized nanomaterials. The XRD result indicates the crystalline nature of the ternary oxide with BET surface area of 49.53 m2 g−1. The optimum operating conditions to carry out sorption study such as pH, adsorbent dose, contact time, speed of agitation and initial phosphate concentration were found to be 3, 0.1 g, 16 h, 100 rpm and 30 ppm, respectively. Both Freundlich and Langmuir isotherm models fit the equilibrium data well with the latter model providing more fit to the experimental data. Kinetic data correlated well with the pseudo-second-order and Elovich models suggesting chemisorptions as the prevailing mechanism of phosphate sorption onto the nanosorbent. Thermodynamic studies resulted negative ΔG values indicating the spontaneity of the sorption process. The Fe-Al-Mn ternary nanocomposite sorbent showed a sorption capacity of 38.46 mg g−1 at pH 3. The sorption efficiency of the nanosorbent was found to be 99.5%. This adsorbent, with large sorption capacity and efficiency, is therefore a promising adsorbent for the removal of phosphate ions from aqueous systems., ID is grateful to CSIC for her research leave at AAU and HU. The financial support from the Spanish Research Council CSIC I-COOP+-2014 (COOPB20082) is acknowledged for funding. This work has also been funded from Projects MAT2015-65767-P (MINECO) and MAT2016-77496-R (AEI/FEDER, UE). The Research and Extension Office of Haramaya University (HURG-2014-03-03), School of Graduate Studies and Chemistry Department of HU are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oriented Coimmobilization of Oxidase and Catalase on Tailor-Made Ordered Mesoporous Silica

  • Bolívar Bolívar, Juan Manuel
  • Gascón Pérez, Victoria
  • Márquez Álvarez, Carlos
  • Blanco Martín, Rosa María
  • Nidetzky, Bernd
Mesoporous silica materials are promising carriers for enzyme immobilization in heterogeneous biocatalysis applications. By tailoring their pore structural framework, these materials are designable for appropriate enzyme binding capacity and internal diffusivity. To supply O2 efficiently to solid-supported immobilized enzymes represents a core problem of heterogeneously catalyzed oxidative biotransformations. In this study, therefore, we synthesized and compared three internally well-ordered and two amorphous silica materials as enzyme carriers, each of those with pore sizes of ≥10 nm, to enable the coimmobilization of d-amino-acid oxidase (79 kDa) and catalase (217 kDa). Both enzymes were fused to the silica-binding module Zbasic2 to facilitate their selective and oriented immobilization directly from crude protein mixtures on native silica materials. Analyzing the effects of varied pore architecture and internal surface area on the performance of the immobilized bienzymatic system, we showed that a uniform pore structural framework was beneficial for enzyme loading (≥70 mg protein/g carrier), immobilization yield (≥90%), surface and pore volume filling without hindered adsorption, and catalytic effectiveness (≥60%) of the coimmobilizate. Using the best carrier LP-SBA-15, we obtained a solid oxidase-catalase preparation with an activity of 2000 μmol/(min g_material) that was recyclable and stable during oxidation of d-methionine. These results affirm a strategy of optimizing immobilized O2-dependent enzymes via tunable internal structuring of the silica material used as carrier. They thus make a significant advance toward the molecular design of heterogeneous oxidation biocatalysts on mesoporous silica supports., V.G.P., C.M.-A., and R.M.B. acknowledge Spanish Government for financial support (MAT-2012-31127). This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Projects MAT2016–77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly of chiral (1R,2S)-ephedrine and (1S,2S)-pseudoephedrine into low-dimensional aluminophosphate materials driven by their amphiphilic nature

  • Bernardo-Maestro, Beatriz
  • Garrido-Martín, Elisa
  • López-Arbeloa, Fernando
  • Pérez-Pariente, Joaquín
  • Gómez-Hortigüela Sainz, Luis
In an attempt to promote the crystallization of chiral inorganic frameworks, we explore the ability of chiral (1R,2S)-ephedrine and its diastereoisomer (1S,2S)-pseudoephedrine to act as organic building blocks for the crystallization of hybrid organo-inorganic aluminophosphate frameworks in the presence of fluoride. These molecules were selected because of their particular molecular asymmetric structure, which enables a rich supramolecular chemistry and a potential chiral recognition phenomenon during crystallization. Up to four new low-dimensional materials have been produced, wherein the organic molecules form an organic bilayer in-between the inorganic networks. We analyze by molecular simulations the trend of these chiral molecules to form these types of framework, which is directly related to their amphiphilic nature that triggers a strong self-assembly through hydrophobic interactions between aromatic rings and hydrophilic interactions with the fluoro-aluminophosphate inorganic units. Such a self-assembly process is strongly dependent on the concentration of the organic molecules., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness (Project MAT2015-65767-P) and the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE). BBM acknowledges the Spanish Ministry of Economy and Competitivity for a predoctoral (BES-2013-064605) contract. Secretaría General Adjunta de Informática-CSIC is acknowledged for running the calculations, and BIOVIA for providing the computational software., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ICP-2: A New Hybrid Organo-Inorganic Ferrierite Precursor with Expanded Layers Stabilized by π–π Stacking Interactions

  • Gálvez Ortiz, Pilar
  • Bernardo-Maestro, Beatriz
  • Vos, Eva
  • Díaz Carretero, Isabel
  • López-Arbeloa, Fernando
  • Pérez-Pariente, Joaquín
  • Gómez-Hortigüela Sainz, Luis
In this work we present the synthesis, characterization, and molecular modeling of ICP-2, a new layered ferrierite precursor with expanded layers. ICP-2 is obtained in fluoride medium from aluminosilicate gels with low H2O content, using the chiral cation (1R,2S)-dimethylephedrinium (DMEP) as the organic structure-directing agent; ICP-2 can also be obtained as the Al-free form. The combination of physicochemical characterization of the material with molecular modeling indicates that ICP-2 is a layered material composed of ferrierite layers, where the organic cations play a dual structural role through the formation of supramolecular aggregates. On one hand, the organic cations stabilize the formation of the ferrierite layers with a core–shell structure, directing the formation of both the pseudo-10R channels (by supramolecular dimers aligned with the channel direction) and of the pseudocavities, with the trimethylammonium groups of DMEP fitting within. On the other hand, the aromatic rings of these organic cations in the pseudocavities develop π–π stacking interactions with equivalent cations in adjacent layers, holding together the ferrierite layers expanded at a distance of ∼20 Å, hence preventing the formation of H-bonds between the inorganic layers. The diastereoisomer (1S,2S)-dimethylpseudoephedrinium instead cannot direct the formation of ICP-2, which is explained because of its distinct conformational space which fits worse in the core–shell structure of ICP-2., The research leading to these results has received funding from the Spanish Ministry of Economy and Competitiviness (MAT2015-65767-P). This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE). B.B.M. acknowledges the Spanish Ministry of Economy and Competitiviness for predoctoral (BES-2013-064605) contract. E.V. acknowledges the Spanish Society of Catalysis (SECAT) for an “Introduction to Research” grant. Prof. F. Rey is acknowledged for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Directional Antenna Systems: Energy Transfer from Monomers to J-Aggregates within 1D Nanoporous Aluminophosphates

  • Sola-Llano, Rebeca
  • Fujita, Yasuhiko
  • Gómez-Hortigüela Sainz, Luis
  • Alfayate Lanza, Almudena
  • Ujii, Hiroshi
  • Fron, Eduard
  • Toyouchi, Shuichi
  • Pérez-Pariente, Joaquín
  • López-Arbeloa, Íñigo
  • Martínez, Virginia
Publication Date (Web): October 19, 2017., A cyanine dye (PIC) was occluded into two 1D-nanopoporus Mg-containing aluminophosphates with different pore size (MgAPO-5 and MgAPO-36 with AFI and ATS zeolitic structure types, with cylindrical channels of 7.3 Å diameter and elliptical channels of 6.7 Å × 7.5 Å, respectively) by crystallization inclusion method. Different J-aggregates are photophysically characterized as a consequence of the different pore size of the MgAPO frameworks, with emission bands at 565 nm and at 610 nm in MgAPO-5 and MgAPO-36, respectively. Computational results indicate a more linear geometry of the J-aggregates inside the nanochannels of the MgAPO-36 sample than those in MgAPO-5, which is as a consequence of the more constrained environment in the former. For the same reason, the fluorescence of the PIC monomers at 550 nm is also activated within the MgAPO-36 channels. Owing to the strategic distribution of the fluorescent PIC species in MgAPO-36 crystals (monomers at one edge and J-aggregates with intriguing emission properties at the other edge) an efficient and one-directional antenna system is obtained. The unidirectional energy transfer process from monomers to J-aggregates is demonstrated by remote excitation experiments along tens of microns of distance., Financial support from Gobierno Vasco (IT912-16) and Ministerio de Economı́a y Competitividad “MINECO” (through Projects MAT2014-51937-C3-3-P, MAT2016-77496-R and MAT-2015-65767-P) is acknowledged. R.S.L. and V.M.M. acknowledge Universidad del Paı́s Vasco (UPV-EHU) for a postdoctoral fellowship and MINECO for a “Ramón y Cajal” Contract (RYC-2011-09505), respectively. H.U. gratefully acknowledges the financial support of the European Research Council (#280064), the FWO (G056314N, G0B5514N, G081916N), and JSPS KAKENHI (JP17H03003, JP17H05244, JP17H05458)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semi-crystalline Fe-BTC MOF material as an efficient support for enzyme immobilization

  • Gascón Pérez, Victoria
  • Jiménez, Mayra B.
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
Metal-organic frameworks (MOFs) have revolutionized the potential applications of nanoporous materials. One of the most recent and promising applications of these materials is their use as supports for enzyme immobilization. In this context, the in-situ (one-step) methodologies, which do not require the use of MOFs with pores larger than the enzyme to be immobilized, seem to be particularly encouraging. This work presents a systematic study of the semi-crystalline Fe-BTC MOF material (commercialized as Basolite F300) employed as support of the enzymes laccase and lipase through either in-situ or post-synthesis methodology. The presence of the enzyme in the resultant solid biocatalysts was proved by CHNS chemical analysis, thermogravimetric analysis, Bradford assays and by SDS-PAGE electrophoresis. The enzymatic activity of the resultant Fe-BTC-based biocatalysts was also tested. The in-situ approach is particularly relevant due to various reasons: (i) the enzyme immobilization is given in one step; (ii) it is rapid (10 min); (iii) it is very efficient in terms of encapsulation capacity (≥98% for laccase and ≥87% for lipase); (iv) the enzymes are fully retained and no leaching is observed after an initial release of only around 10% of the enzyme molecules weakly immobilized; and (v) the activity of the retained enzyme can be substantially maintained (97% with respect to the free enzyme in the case of lipase). Any of these parameters systematically improves these given by the post-synthesis (two-step) approach. Moreover, Fe-BTC widely surpasses the benefits given by other MOF-based supports either by in-situ or post-synthesis approaches., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ and post‐synthesis immobilization of enzymes on nanocrystalline MOF platforms to yield active biocatalysts

  • Gascón Pérez, Victoria
  • Castro-Miguel, Elsa
  • Díaz-García, Manuel
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
[Background] Very recently, metal‐organic framework (MOF) materials have been postulated as emerging supports to achieve solid‐state enzyme‐contained biocatalysts. In this work, post‐synthesis and in situ strategies to immobilize β‐glucosidase and laccase on different MOF materials were studied. The MOF‐based supports, i.e. MIL‐53(Al), NH2‐MIL‐53(Al) and Mg‐MOF‐74, were prepared under soft and sustainable conditions (room temperature and pH values compatible with enzymatic activity), allowing development of the in situ strategy., [Results] In both post‐synthesis and in situ approaches, the intercrystalline mesoporosity of the MOF‐based support favored the immobilization efficiency or the specific activity. The latter expressed as units per milligram of immobilized enzyme was higher in the post‐synthesis immobilization, whereas the biocatalysts prepared in situ gave much higher enzyme loading (over 85%) and lower enzyme leaching (around 5%). The in situ approach even worked in a non‐aqueous (N,N‐dimethylformamide) media in which the free enzyme was completely inactive. The immobilized enzymes are much larger than the structural pores of the MOFs., [Conclusions] Enzymes can be efficiently immobilized on nanocrystalline MOFs prepared under soft and sustainable conditions despite the supports lacking large enough pores to host the enzymes. The in situ approach is very efficient capturing enzymes and preserving some of their activity even under adverse conditions. © 2017 Society of Chemical Industry, This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016‐77496‐R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid In Situ Immobilization of Enzymes in Metal–Organic Framework Supports under Mild Conditions

  • Gascón Pérez, Victoria
  • Carucci, Cristina
  • Jiménez, Mayra B.
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
  • Magner, Edmond
The use of a metal–organic framework (MOF) as a support for the in situ immobilization of enzymes was explored. The MOF support, a Basolite F300‐like material, was prepared from FeCl3 and the tridentate linker trimesic acid. Immobilization of alcohol dehydrogenase, lipase, and glucose oxidase was performed in situ under mild conditions (aqueous solution, neutral pH, and at room temperature) in a rapid and facile manner with retention of activity for at least 1 week. The catalytic activities of lipase and glucose oxidase were similar to the activities of the free enzymes; with alcohol dehydrogenase, there was a substantial decrease in activity on immobilization that may arise from diffusion limitations. The approach demonstrates that a MOF material, prepared from cheap and commercially available materials, can be successively utilized to prepare stable and catalytically active biocatalysts in a rapid and facile manner., Support from the Science Foundation Ireland (12/RC/2275), the Programme for Third Level Institutions, the Irish Research Council (postdoctoral fellowship to V.G. GOIPD/2015/287), and the Spanish Government (MAT‐2012‐31127) is gratefully acknowledged. This work was also partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016‐77496‐R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionothermal preparation of triclinic SAPO-34 and its catalytic performance in the MTO process

  • Sánchez Sánchez, Manuel
  • Romero, Álvaro A.
  • Pinilla-Herrero, Irene
  • Sastre, Enrique
This work reports the ionothermal synthesis of SAPO-34 material, which is the per-excellence catalyst in the methanol-to-olefins (MTO) process. The direct addition of Si sources to the aluminophosphate and ionic liquid (1-ethyl-3-methyl imidazolium) mixture gave rise to the undesired AEL-structured materials. Therefore, some other strategies were necessary to apply. In particular, two unexplored strategies have been developed: (i) the addition of further heteroatom ions able to direct CHA materials, V ions being particularly efficient; and (ii) to carry out the synthesis in open systems rather than in autoclaves under autogenous pressure. Interestingly, the combination of both strategies led to V4+-free SAPO-34 samples, so any Brönsted acidity of the samples should be assigned to the incorporated Si atoms. These materials, far from being conventional SAPO-34, have triclinic CHA structure, which provides some structural singularities and have not been tested as catalysts in the MTO reaction yet. Despite their conversion level achieved was lower than that given by conventional SAPO-34, probably because of the scarce optimization of the physicochemical properties of the material, the selectivity towards the different olefins is interestingly different, favoring C4 olefins at the expense of ethylene and propylene., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE) and Project MAT2012-31127. IPH acknowledges CSIC for a PhD Jae-Predoc fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Preparation of MIL-100(Fe) and Its Photocatalytic Behavior in the Degradation of Methyl Orange in Water

  • Guesh, Kiros
  • Caiuby, Clarice A. D.
  • Mayoral, Álvaro
  • Díaz-García, Manuel
  • Díaz Carretero, Isabel
  • Sánchez Sánchez, Manuel
The real industrial establishment of metal–organic frameworks (MOFs) requires significant advances in economic and chemical sustainability. This work describes a novel and simple method to prepare one of the most widely studied MOF materials, i.e., MIL-100(Fe), which significantly improves the sustainability of the conventional process in several aspects. This MOF material is prepared (i) at room temperature (instead of 150 °C used in the conventional method), (ii) after a few hours (instead of 6 days), (iii) in the absence of any inorganic corrosive acid (significant amounts of HF and HNO3 are used in the conventional method), and (iv) it is washed at room temperature (unlike the washing at 80 °C for 3 h). Interestingly, the only difference in the preparation method of MIL-100(Fe) compared with that of semiamorphous Fe-BTC (MOF material commercialized as Basolite F300 having the same metal and linker, and which can be also prepared under similar sustainable conditions) is to start from Fe(II) or Fe(III) sources, respectively, which opens certain versatility options in the room temperature synthesis procedures of MOF materials. The prepared samples were characterized using X-ray diffraction, thermogravimetric analysis, N2 adsorption/desorption isotherms, Cs-aberration corrected scanning transmission electron microscopy, and UV–vis diffuse reflectance spectroscopy. These two room-temperature-made Fe-BTC materials were tested in the industrially demanded photocatalytic degradation of methyl orange under both ultraviolet and solar light radiation. MIL-100(Fe) was a very active photocatalyst in comparison with its homologue. That difference was mainly attributed to the presence of larger cavities within its structure., A.M. acknowledges European Union Seventh Framework Programme under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative-I3). C.A.D.C. acknowledges Science without Borders - CNPq - Brazil. K.G. and I.D. also acknowledge CSIC for Development Program I-COOP-2014 COOPB20082 project number. This work has been (partially) financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through Project MAT2016-77496-R (AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexibility of the imidazolium based ionic liquids/water system for the synthesis of siliceous 10-ring containing microporous frameworks

  • Lezcano-González, Inés
  • O'Brien, Matthew G.
  • Počkaj, Marta
  • Sánchez Sánchez, Manuel
  • Balea, Andrew M.
By using asymmetric di-substituted imidazolium molecules (1-Butyl-3-methylimidazolium (BMIM) and 1-Ethyl-3-methylimidazolium (EMIM) bromide) as the structure directing agents, in combination with simple changes in silica source or sodium/water content it is possible to prepare three pure phase microporous 10-ring siliceous zeolitic structures. The crystallizations are comparatively rapid with fully crystalline material resulting in 1–3 days at 443 K. In contrast to many recipes reported for pure silica materials, the synthesis is performed without the use of HF or without the need to alter the properties of the SDA, while significantly lower amounts of both ionic liquid and mineralizing agent are required. The results obtained indicate that effective phase control can be achieved from a primary gel composition by minor changes to either the silica source or the water/sodium content, with a strong specificity in the formation of topologies with interconnected 10-rings., NWO-CW and EPSRC (EP/K007467/1) is thanked for funding support to Andrew M. Beale and Inés Lezcano-González respectively. Manuel Sánchez-Sánchez acknowledges the Spanish Government for financial support (MAT2016-77496-R) and the Slovenian research agency is acknowledged for financial support (grant MR-29397) to Marta Počkaj., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformational Space of (1R,2S)-Dimethyl-Ephedrinium and (1S,2S)-Dimethyl-Pseudoephedrinium in the Synthesis of Nanoporous Aluminophosphates

  • Bernardo-Maestro, Beatriz
  • Gálvez Ortiz, Pilar
  • González, Dorleta
  • López-Arbeloa, Fernando
  • Pérez-Pariente, Joaquín
  • Gómez-Hortigüela Sainz, Luis
In this work, we report a comparative study about the structure-directing effect of two chiral diastereoisomers, (1R,2S)-dimethyl-ephedrinium and (1S,2S)-dimethyl-pseudoephedrinium, for the synthesis of nanoporous aluminophosphates. Both isomers direct the crystallization of the one-dimensional channels composing the AFI framework in the presence of divalent dopants when the crystallization temperature is moderate (140 °C). An increase of the crystallization temperature (to 180 °C) severely limits the structure-directing ability toward the AFI framework because of a poor hydrothermal stability of the organic cations, especially of the (1S,2S)-isomer. 13C NMR and molecular simulations studies of these organic cations in solution and confined within nanoporous zeolitic materials allow us to clearly identify 13C resonance signals of particular methyl groups which vary as a function of the conformational space and enable us to monitor the occurrence of the different conformers in diverse environments. In vacuo and in solution, both organic cations display a conformation with an open-configuration, in which the bulky phenyl and trimethylammonium groups site in “anti” configuration. Such conformational space is altered when the cations are confined within the limited space of the one-dimensional channels of the AFI structure. In this case, despite folded-conformations being intrinsically less stable, lateral packing interactions within the channels drive an incorporation of the cations as a mixture of conformers (with open- and folded-configurations) for the (1R,2S)-isomer or as folded conformers for the (1S,2S)-isomer, showing the importance of the conformational space of organic cations during the structure-directing phenomenon., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness (Project MAT2015-65767-P) and the Spanish State Research Agency (Agencia Española de Investigación, AEI), and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE). B.B.M. acknowledges the Spanish Ministry of Economy and Competitivity for a predoctoral (BES-2013-064605) contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformational sieving effect of organic structure-directing agents during the synthesis of zeolitic materials

  • Nieto-Hernández, David
  • Pérez-Pariente, Joaquín
  • Toran, Ennrique
  • López-Arbeloa, Fernando
  • Gómez-Hortigüela Sainz, Luis
In this work we find a novel conformational sieving effect during the structure-direction of two chiral organic diastereoisomers, (1R,2S)-benzyl-ephedrine and (1S,2S)-benzyl-pseudoephedrine, during the synthesis of zeolitic aluminophosphates. Protonation of each diastereoisomer can take place through two different stereochemical configurations, giving place to a new stereogenic N center that results in two stereoisomers for each molecule, with (1R,2S,NS) or (1R,2S,NR) configurations for benzyl-ephedrine or (1S,2S,NR) or (1S,2S,NS) configurations for benzyl-pseudoephedrine. Through a combination of H and C NMR spectroscopies and DFT + D computational calculations we are able to distinguish the two stereoisomers derived from benzyl-pseudoephedrine: results show a higher occurrence of the (1S,2S,NS) isomer in aqueous solution, displaying a folded molecular configuration, while the less abundant (1S,2S,NR) isomer displays instead a conformation with an elongated shape. Crystallization of microporous aluminophosphates in the presence of benzyl-pseudoephedrine results in materials with AFI structure based on one-dimensional channels with a surprising higher occurrence of the (1S,2S,NR) isomer, in sharp contrast with the behavior in aqueous solution. Such notable difference is ascribed to the elongated shape of the (1S,2S,NR) stereoisomer that can better fit within the AFI one-dimensional nano-channels. On the other hand, assignment of the H and C NMR bands to the different protonated stereoisomers of (1R,2S)-benzyl-ephedrine is not as clear due to the smaller splitting of the signals upon protonation through the two stereochemical configurations. This work demonstrates that confinement in nano-spaces can alter the relative stability of stereoisomers in open spaces, leading to the occurrence of species that would not be possible otherwise., This work has been partiallyfinanced by the Spanish State ResearchAgency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional,FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE), andby Consejo Superior de Investigaciones Científicas (CSIC) through project 201780I043. DN acknowledges the Youth Employment Initiative and European Social Fund and Comunidad Autónoma de Madrid for funding his contract (PEJD-2017-PRE/IND-3801). Secretaría General Adjunta de Informática-CSIC is acknowledged for running thecalculations, and BIOVIA for providing the computational software;, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 3D Large-Pore Germanosilicate Zeolites Using Imidazolium-Based Long Dications

  • Lu, Peng
  • Mayoral, Álvaro
  • Gómez-Hortigüela Sainz, Luis
  • Zhang, Yaping
  • Camblor, Miguel Ángel
[EN] Introduction of small molar fractions of Ge in a synthesis system otherwise yielding the monodimensional large-pore zeolite MTW produced three 3D large-pore materials as the Ge fraction increased: *BEA, HPM-8, and HPM-7. HPM-8 is a zeolite consisting of an intergrowth of polymorphs D and E of the zeolite Beta family with a large predominance (>80%) of polymorph D, according to DIFFaX simulations and high-resolution scanning transmission electron microscopy analysis. After calcination, HPM-8 becomes remarkably stable upon contact with ambient air. HPM-7 likely possesses the POS topology, which is related to polymorph C. The density of double 4-ring (D4R) units in the crystallized materials increases from *BEA to HPM-8 to HPM-7, that is, as the Ge fraction increases. Interestingly, molecular mechanics show that in both HPM-7 and HPM-8, the organic dications prefer to site with their imidazolium rings in close contact with the D4R units as a consequence of a stronger confinement in this position. Indeed, the structure-directing role of these long dications can be explained as a consequence of the appropriate distance match between adjacent D4R units in both zeolite frameworks (and hence the negative charges associated with the occluded fluoride) and the imidazolium rings of these organic dications (and hence the positive charges), which is dictated by the length of the alkyl spacers, thus driving the crystallization pathway toward these particular germanosilicate zeolites., Ministry of Science, Innovation and Universities (projects MAT2016-77496-R and MAT2015-71117-R) and the National Natural Science Foundation of China (NSFC-21850410448, NSFC- 21835002). P.L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. A.M. and Y.Z. acknowledge The Centre for High-resolution Electron Microscopy (CℏEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. The authors are also indebted to L.A. Villaescusa (Valencia) for helpful comments and suggestions. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of pure silica MFI zeolites using imidazolium-based long dications. A comparative study of structure-directing effects derived from a further spacer length increase

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] Length-dependent structure direction of linear methylimidazolium-based dications towards MFI zeolite, previously known only for the tetramethylene spacer, has also been found for octamethylene and decamethylene spacers. This works only under highly concentrated conditions, whereas dilution always tends to favor TON, a default structure that is the only zeolite obtained with the other reported dications (with tri-, penta-, and hexamethylene spacers). The locations and conformations of the dications have been studied by molecular mechanics simulations. As longer dications introduce lower density of positive charges in the zeolite, the density of connectivity defects also decreases. Finally, these long dications cannot easily place each charged imidazolium ring in the two possible orientations (either parallel or perpendicular to 4MR close to F sites) found for the tetramethylene case. Hence, although the three MFI materials display two F NMR resonances at similar chemical shifts, their relative intensities strongly vary as a function of the spacer length., Financial support provided by the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71117-R and MAT2016-77496-R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia is acknowledged for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Pure Silica MWW Zeolite in Fluoride Medium by Using an Imidazolium-Based Long Dication

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] As the spacer length in 1,2-dimethylimidazolium-based dications increases beyond a specific point (six methylene units), they fail in structure-directing towards STW zeolites in any synthetic conditions. These dications can instead produce, under fluoride concentrated conditions, either *BEA [in the case of the eight-methylene-unit structure-directing agent (SDA)] or MWW (ten methylene units) zeolites. For any length of the dication, the default zeolite (MTW) is a relatively dense zeolite containing a unidimensional channel, whereas the zeolite demanding most specificity (STW, *BEA or MWW) is more porous, affording a larger concentration of the dication to be occluded. This work provides the first reported fluoride synthesis of pure silica MWW zeolites. Charge balance of the organic dications in this zeolite was achieved by combining “structural” silanolates, regular “connectivity defects” and occluded fluoride. Molecular mechanics calculations showed a perfect fit of the decamethylenebis(dimethylimidazolium) dication in the sinusoidal intralayer pore system of MWW. The calculations showed also that the dication is able to stabilize the interlayer space without disturbing the hydrogen-bonding system that holds the layers together in the as-made material. The F magic-angle spinning (MAS) NMR presented two distinct resonances at −71 and −83 ppm, which, on the basis of DFT calculations, we tentatively assigned to fluoride occluded in [46] and [456] cages of the MWW structure, respectively. The same DFT study determines a different chemical shift of one methyl C nuclear magnetic resonance according to the imidazolium ring residing in the sinusoidal channels or in the large cup cavities, thus explaining an experimentally observed splitting of that resonance., Financial support provided by the Spanish Ministry of Economy and Competitiveness (projects MAT2015-71117-R and MAT2016-77496-R) is acknowledged. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations, and Biovia is acknowledged for providing the computational software.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural Mordenite from Spain as Pozzolana

  • Presa, Leticia
  • Costafreda, Jorge L.
  • Martín, Domingo A.
  • Díaz Carretero, Isabel
© 2020 by the authors., This work deals with anomalous concentrations of natural mordenite in the southeast of Spain. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies evidenced that the samples contain mainly monomineral zeolitic phase of mordenite (70% to 74%), usually accompanied by smectite (montmorillonite), the principal component of bentonite. A study of the applicability of these zeolites is presented to establish the potential use as pozzolanic cements. For comparative purposes, synthetic commercial mordenite is also characterized and tested. The initial mixtures were prepared using cement and mordenite at a 75:25 ratio. Chemical analysis and a pozzolanicity test showed the high pozzolanic character. These mixtures were further added to sand and water, yielding the cement specimens to be used as concrete. Mechanical test results showed that the mechanical compression at 7 and 28 days fall into the range of 19.23 to 43.05 MegaPascals (MPa) for the cement specimens built with natural mordenites. The obtained results fall in the same range of cement specimens prepared with natural clinoptilolite, using mixtures within the European requirement for commercial concretes. Thus, these results and the low cost of natural mordenite of San José de los Escullos deposit supports the potential use of natural mordenite as pozzolanic cement., This work has been partially funded through the Project MAT2016-77496-R (AEI/FEDER. UE). JLC acknowledges funding via ALFA-ALEMYMA Network (B73011/94.04-6.0025.9)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of Ag Nanoparticles in/on Ag@MIL-100(Fe) Prepared Through Different Procedures

  • Mahugo, Rubén
  • Mayoral, Álvaro
  • Sánchez Sánchez, Manuel
  • Díaz Carretero, Isabel
[EN] Loading of active metals, metal clusters, and/or metal nanoparticles in Metal Organic Frameworks (MOFs) is an emergent field with applications in sensors, catalysis, medicine, and even in the polymeric industry. In the present work, MIL-100(Fe) has been synthesized and reacted with AgNO through liquid and incipient wetness, and also through solid-state reaction or solid grinding. The aim of this study is to evaluate whether the MIL-100 would uptake metal particles using a similar principle as that of the ion exchange in zeolites, or else, their inherent humidity would favor the “dissolution” of the metal salt, thus yielding very small metal particles. The immobilization of Ag nanoparticles inside the MOF pores was identified by C-corrected scanning transmission electron microscopy (C-corrected STEM) techniques., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE), the Centre for High-resolution Electron Microscopy (C¯hEM), supported by SPST of ShanghaiTech University under contract No. EM02161943, and National Natural Science Foundation of China (NSFC) through the projects NFSC-21850410448 and NSFC-21835002. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

accordion-like effect of flexible organic structure-directing agents in the synthesis of ferrierite zeolite

  • Almeida, Ramón Kenned S.
  • Pérez-Pariente, Joaquín
  • Gómez-Hortigüela Sainz, Luis
Appendix A. Supplementary data Supplementary data to this article can be found online at https://doi. org/10.1016/j.micromeso.2020.110149, [EN] Ferrierite zeolite was synthesized by a co-structure-directing route using a highly flexible diquaternary ammo-nium cation (N,N0-bis-triethylpentanediyldiammonium) as a structure directing agent in combination with tet-ramethylammonium as a small co-structure-directing agent. Strong alterations of the 13C NMR bands of the bulky organic dication upon confinement within the ferrierite framework suggest a change of conformation driven by host-guest interactions. A combination of molecular mechanics and DFT calculations of the theoretical 13C NMR chemical shifts allowed to explain the observed differences in the NMR bands of the dication in solution and when hosted in ferrierite: upon confinement, the flexible dication needs to squeeze through the flexible pentyl chain which locates along the 10 MR ferrierite channels in order to host the two bulky triethyl ammonium groups in adjacent intersections with 8 MR channels. Our work suggests that highly flexible cations, usually considered as less convenient organic structure-directing agents because of low specificity, have the advantage of being able to properly fit with different zeolite cell dimensions through an accordion-like effect by squeezing or stretching their flexible chains., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE), and by Consejo Superior de Investigaciones Científicas (CSIC) through project 201780I043. R.K.S.A. is grateful to Fundação de Amparo à Pesquisa do Estado de São Paulo – FAPESP (Process nº 2014/10609-5) for the scholarship and financial support during post-doctoral internship at Instituto de Catálisis y Petroleoquímica (CSIC). Secretaría General Adjunta de Informática-CSIC is acknowledged for running the calculations, and BIOVIA for providing the computational software., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of a germanosilicate zeolite HPM-12 using a short imidazolium-based dication: Structure-direction by charge-to-charge distance matching

  • Lu, Peng
  • Gómez-Hortigüela Sainz, Luis
  • Gao, Yi
  • Camblor, Miguel Ángel
[EN] A short imidazolium based dication, with only three methylene units in the spacer linker, selectively directs the crystallization of zeolite HPM-12 (?UOE) as long as there is enough germanium present in the synthesis gel. The integrity of the dication is proved by dissolution of the zeolite and H and C NMR spectroscopy, where significant effects of organic dication concentration and the presence and concentration of HF need to be taken into account. For the as-made HPM-12 zeolite, a large shift of 9 ppm of one resonance in the C MAS NMR spectrum is due to the particular conformation of the dication imposed by confinement in the zeolite framework, as found by DFT calculations. The structure-directing ability of this kind of dication with varying length of the linker suggests that matching of the distance between positive charges (imidazolium moieties) and negative charges (double four rings in which fluoride resides) plays a crucial role during crystallization., The authors acknowledge financial support from the Spanish Ministerio de Economía y Competitividad, the Spanish Agencia Estatal de Investigación and the EU's Fondo Europeo de Desarrollo Regional under projects MAT2016-77496-R (AEI/FEDER, UE) and MAT2015-71117-R (MINECO/FEDER, UE). We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). P.L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. Centro Técnico Informático-CSIC is acknowledged for running the calculations and Biovia for providing the computational software. We also thank L. A. Villaescusa for helpful comments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Article White Light Emission by Simultaneous One Pot Encapsulation of Dyes into One-Dimensional Channelled Aluminophosphate

  • Sola-Llano, Rebeca
  • Oliden-Sánchez, Ainhoa
  • Alfayate Lanza, Almudena
  • Gómez-Hortigüela Sainz, Luis
  • Pérez-Pariente, Joaquín
  • Arbeloa, Teresa
  • Hofkens, Johan
  • Fron, Eduard
  • Martínez, Virginia
[EN] By simultaneous occlusion of rationally chosen dyes, emitting in the blue, green and red region of the electromagnetic spectrum, into the one-dimensional channels of a magnesium-aluminophosphate with AEL-zeolitic type structure, MgAPO-11, a solid-state system with e cient white light emission under UV excitation, was achieved. The dyes herein selected—acridine (AC), pyronin Y (PY), and hemicyanine LDS722—ensure overall a good match between their molecular sizes and the MgAPO-11 channel dimensions. The occlusion was carried out via the crystallization inclusion method, in a suitable proportion of the three dyes to render e cient white fluorescence systems by means of fine-tuned FRET (fluorescence resonance energy transfer) energy transfer processes. The FRET processes are thoroughly examined by the analysis of fluorescence decay traces using the femtosecond fluorescence up-conversion technique., This research was funded by Gobierno Vasco (IT912-16), Ministerio de Economía y Competitividad (MINECO), the Spanish Agencia Estatal de Investigación, and the EU’s Fondo Europeo de Desarrollo Regional under projects MAT2017-83856-C3-3-P and MAT2016-77496-R, and C1/C2 KU Leuven, FuEPoNa (3E190382)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization of HPM-7, a more ordered than expected germanosilicate zeolite

  • Lu, Peng
  • Zhang, Yaping
  • Mayoral, Álvaro
  • Gómez-Hortigüela Sainz, Luis
  • Camblor, Miguel Ángel
[EN] HPM-7, a germanosilicate synthesized using long imidazolium-based dications with two different linkers, is shown to possess the POS topology, although disorder may exist but it is very difficult to discern. First, three simple ordered polymorphs (POS-A to POS-C) with very similar energies and structural motifs could give rise to intergrowths that would be very difficult to recognize by powder X-ray diffraction, according to DIFFaX simulations. Another four structures (POS-D to POS-G) can be derived from POS by changing the orientation of two single four rings within the structure, possibly providing an additional source of disorder. While 3D EDT strongly suggests that HPM-7 basically possesses the POS-A (i.e.POS) topology, a detailed HR-STEM study demonstrates the rare existence of some disorder compatible with the polymorph POS-D. The general avoidance of polymorphs with very similar structural motifs and comparable energies points to a rather specific structure-direction by the organic dications used., The authors acknowledge the financial support by the Spanish Ministerio de Economía y Competitividad, the Spanish Agencia Estatal de Investigación and the EU’s Fondo Europeo de Desarrollo Regional under projects MAT2016-77496-R (AEI/FEDER, UE) and MAT2015-71117-R (MINECO/FEDER, UE). We are indebted to the ERSF (Grenoble) and the BM25 Spline staff, particularly to G. Castro and A. Serrano as well as to L. A. Villaescusa (Valencia) for help in collecting the SPXRD data and for helpful comments and suggestions. P. L. is grateful to the China Scholarship Council (CSC) for a fellowship and to the Dalian Institute of Chemical Physics for permission to leave. AM acknowledges the Natural National Science Foundation of China (NFSC) through the grants NFSC-21850410448 & NSFC-21835002. AM and YZ acknowledge the Centre for Highresolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract no. EM02161943. We acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Efficient One-Step Immobilization of CaLB Lipase over MOF Support NH2-MIL-53(Al)

  • Gascón Pérez, Victoria
  • Jiménez, Mayra B.
  • Molina Esquinas, Asunción
  • Blanco Martín, Rosa María
  • Sánchez Sánchez, Manuel
© 2020 by the authors., Metal-organic framework (MOF) materials possess the widest versatility in structure, composition, and synthesis procedures amongst the known families of materials. On the other hand, the extraordinary affinity between MOFs and enzymes has led to widely investigating these materials as platforms to support these catalytic proteins in recent years. In this work, the MOF material NH2-MIL-53(Al) has been tested as a support to immobilize by one-step methodology (in situ) the enzyme lipase CaLB from Candida antarctica by employing conditions that are compatible with its enzymatic activity (room temperature, aqueous solution, and moderate pH values). Once the nature of the linker deprotonating agent or the synthesis time were optimized, the MOF material resulted in quite efficient entrapping of the lipase CaLB through this in situ approach (>85% of the present enzyme in the synthesis media) while the supported enzyme retained acceptable activity (29% compared to the free enzyme) and had scarce enzyme leaching. The equivalent post-synthetic method led to biocatalysts with lower enzyme loading values. These results make clear that the formation of MOF support in the presence of the enzyme to be immobilized substantially improves the efficiency of the biocatalysts support for retaining the enzyme and limits their leaching., This work has been funded by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE). A.M. acknowledges Spanish MINECO for the PhD student contract BES-2017-082077. V.G.P. acknowledges the Irish Research Council under the Government of Ireland Postdoctoral Fellowship - GOIPD/2015/287.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of amines in the synthesis and properties of mesostructured aluminas and assessment as supports for Co-based Fischer-Tropsch synthesis catalysts

  • Mohammadnasabomran, S.
  • Tavasoli, A.
  • Zamani, Y.
  • Márquez Álvarez, Carlos
  • Pérez-Pariente, Joaquín
  • Martínez, Agustín
The influence of addition of amines (hexylamine, tripropylamine, dodecylamine, and hexadecylamine) and dopants (Zr, Ce) on the properties of mesostructured aluminas (MAs) synthesized using either Tergitol 15-S-9 or Triton X-114 surfactants was investigated. Selected MAs were evaluated as supports for Co and Ru-Co catalysts and their Fischer-Tropsch synthesis (FTS) performance assessed at 493 K, 2.0 MPa, and H/CO = 2. The materials were characterized by XRD, N sorption, TG-DTG, EA, XPS, H-TPR, H chemisorption, and STEM. Regardless of the surfactant, all amines enlarged the pore size of undoped MAs by ca. 2–3 nm. The impact of amines on BET area and pore volume depended, however, on the surfactant-amine combination and on the presence and concentration of dopants. The Ru-promoted catalyst supported on the MA synthesized with Tergitol-tripropylamine doped with Zr displayed the highest FTS activity and C selectivity due to both high cobalt reducibility and optimum particle size (8 nm)., A. M. acknowledges the MINECO of Spain for financial support through the project RTI2018-102161. C. M.-A. and J. P.-P. also acknowledge MINECO for funding (project MAT2016-77496-R). S. M. acknowledges the organization of student affairs (Iran) for a sabbatical leave grant. The authors are thankful to the Microscopy Service of the Universitat Politècnica de València for its assistance in microscopy characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulation of the Activity of Gold Clusters Immobilized on Functionalized Mesoporous Materials in the Oxidation of Cyclohexene via the Functional Group. The Case of Aminopropyl Moiety

  • Mato, Ana
  • Agúndez Rodríguez, Javier
  • Márquez Álvarez, Carlos
  • Mayoral, Álvaro
  • Pérez-Pariente, Joaquín
Gold nanoclusters and isolated gold atoms have been produced in a two-liquid phase procedure that involves a solution of gold in aqua regia and rosemary essential oil as organic layer. These gold entities have been immobilized on the ordered mesoporous silica material SBA-15 functionalized with different amounts of aminopropyl groups. The resulting materials have been characterized by XRD, N<sub>2</sub> adsorption, chemical analysis, TGA, <sup>29</sup>Si MAS NMR, <sup>13</sup>C CP/MAS NMR, UV-vis spectroscopy, XPS, and STEM. The Au-containing materials retain the ordering and porosity of the pristine support. Gold content varies in the range of 0.07–0.7 wt% as a function of the specific immobilization conditions, while STEM evidences the presence of isolated gold atoms. XPS shows a shift of the Au 4f BE toward values lower than those of metallic gold. The catalytic activity in the oxidation of cyclohexene with molecular oxygen at atmospheric pressure parallels the Au content of the aminopropyl-SBA-15 supports. This activity is higher than that of analogous Au entities immobilized on SBA-15 functionalized with thiol or sulfonate groups, the activity decreasing in the order Au-NH<sub>2</sub> > Au-SO<sub>3</sub><sup>−</sup> > Au-SH. This behavior has been attributed to differences in the interaction strength between the functional group and the Au entities, which is optimum for the aminopropyl groups., This research was funded by the Spanish Ministerio de Ciencia e Innovación, project number MAT2016-77496-R, and Consejo Superior de Investigaciones Científicas, grant number 2019AEP076. A.M. acknowledges the finantial support of Ministerio de Ciencia e Innovación through the Ramón y Cajal program, grant number RYC2018-024561-I, Gobierno de Aragón, project number DGA E13_20R, National Natural Science Foundation of China, projects number NFSC-21850410448 and NSFC- 21835002, and Centre for High-resolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract number EM02161943., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of large-pore zeolites from chiral structure-directing agents with two l-prolinol units

  • Gómez-Hortigüela Sainz, Luis
  • Mayoral, Álvaro
  • Liu, Haining
  • Sierra, Teresa
  • Vaquerizo, Laura
  • Mompeán, Cristina
  • Pérez-Pariente, Joaquín
In this work, we perform an in-depth experimental and computational study about the structure-directing effect of two new chiral organic quaternary ammonium dications bearing two N-methyl-prolinol units linked by a xylene spacer in para or meta relative orientation, displaying four enantiopure stereogenic centers in (S) configuration. Synthesis results show that the para-xylene derivative is an efficient structure-directing agent, promoting the crystallization of ZSM-12 (in pure-silica composition), beta zeolite (as pure-silica, or in the presence of Al or Ge), and a mixture of polymorphs C, A and B of zeolite beta (in the presence of Ge). In contrast, the meta-xylene derivative showed a much poorer structure-directing activity, yielding only amorphous materials unless Ge is present in the gel, where beta and polymorph C (together with A and B) zeolites crystallized. Molecular simulations showed that the para-xylene dication displays a cylindrical shape suitable for confining in zeolite pores, while the meta-xylene derivative has an angular shape that shifts from the typical dimensions required for 12MR zeolite channels. Despite enantio-purity of the para-xylene dication with (S,S,S,S) configuration, no enrichment in polymorph A of the zeolite beta samples obtained was observed by Transmission Electron Microscopy. With the aid of molecular simulations, the failure in transferring chirality to the zeolite is explained by the loose fit of this SDA in the large-pores of zeolite beta, and a lack of close geometrical fit with the chiral element of polymorph A, as evidenced by the very similar interaction of the cation with the two enantiomorphic space groups of polymorph A. Nevertheless, the molecular-level knowledge gained in this work can provide insights for the future design of more efficient SDAs towards the synthesis of chiral zeolites., This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Projects MAT2016-77496-R (AEI/FEDER, UE) and PID2019-107968RB-I00, and by CSIC through the Projects 201780I043 and 2019AEP074. Secretaría General Adjunta de Informática-CSIC is acknowledged for running the calculations, and BIOVIA for providing the computational software. AM acknowledges the Spanish Ministry of Science through the Ramon y Cajal program (RYC2018-024561-I), to the Natural National Science Foundation of China (NFSC-21850410448, NFSC-21835002) and to The Centre for High-resolution Electron Microscopy (CħEM), supported by SPST of ShanghaiTech University under contract No. EM02161943. C. Márquez-Álvarez is acknowledged for his help with the N2 isotherm data., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surfactant-induced hierarchically porous MOF-based catalysts prepared under sustainable conditions and their ability to remove bisphenol A from aqueous solutions

  • Molina Esquinas, Asunción
  • Habib, Nejat Redwan
  • Díaz Carretero, Isabel
  • Sánchez Sánchez, Manuel
[EN] Metal-Organic Frameworks (MOFs) are extensively used in different applications, including heterogeneous catalysis given the fact that practically any center can be designed on demand and is accessible for reactants. Just like any other microporous catalysts, the limited diffusion of reactants and products is an endemic drawback also in MOFs. To face it, the use of nanocrystalline MOFs is a proven alternative, which in addition is often accompanied by improvements in sustainability of synthesis procedure (room temperature, water as solvent, etc.). This work goes further adding surfactant-induced mesoporosity to the nanocrystallinity of these materials. As a proof of concept, the nanocrystalline NH-MIL-53(Al) and CTA (cetyltrimethylammonium) were selected as the sustainably-prepared nanocrystalline MOF and a cationic surfactant, respectively. The MOF system is formed by massive and practically instantaneous precipitation entrapping the surfactant, which generates mesopores in the aggregates. The simple washing with ethanol at room temperature leads to a nanocrystalline NH-MIL-53(Al) material containing outstanding intercrystalline mesoporosity. The so-obtaining hierarchically-porous NH-MIL-53(Al) is able to effectively remove bisphenol A (BPA) from aqueous solution (more than 90% of a 25 ppm BPA aqueous solution in just 10 min at room temperature), duplicating the performance given by its counterpart nanocrystalline NH-MIL-53(Al) prepared in the absence of surfactant., This work has been financed by the Spanish State Research Agency (Agencia Estatal de Investigación AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R and CSIC (2019AEP076). M.A. M. acknowledges Spanish MINECO for Ph.D. student contract BES-2017-082077. N.R.H. acknowledges CSIC for the I-COOPA-2019 (COOPA20376) grant and M.S.S the I-COOPA-2018 (COOPA20271) project
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room-temperature prepared bimetallic nanocrystalline MOF-74 as catalysts in the aerobic oxidation of cyclohexene

  • Flores, J. Gabriel
  • Aguilar-Pliego, Julia
  • Martin-Guaregua, Nancy
  • Ibarra, Illich A.
  • Sánchez Sánchez, Manuel
[EN] MOF-74 is probably the MOF material that best combine three key features for catalytic applications: compositional versatility, the presence of open metal sites and the possibility of becoming nanocrystalline, thus avoiding or minimizing any reactants/products diffusion problems within their pores. This work describes, for the first time, the room-temperature preparation of bimetallic nanocrystalline MOF-74 materials and their catalytic performance in the solvent-free oxidation of cyclohexene using oxygen as oxidant. Although the preparation of oligo-metallic MOF-74 has been already published and even certain catalytic and adsorption metallic synergism has been made clear, this work shows that the room temperature synthesis approach provides some further possibilities for controlling the metal distribution by two different strategies: (i) changing the order of metal addition and/or (ii) by synthesis time. The nanocrystalline Me-MOF-74 catalysts based on metal with redox behavior (Mn, Co, Cu) are significantly active in the aerobic oxidation of cyclohexene, whereas Zn is rather an inhibitor. In spite of such inhibitor role of Zn-MOF-74, the bimetallic Zn-M2-MOF-74 samples (M2 = Mn, Co, Cu) show catalytic performance similar to that of the monometallic counterparts M2-MOF-74, and therefore their turnover is considerably increased. The system Cu-Mg-MOF-74 was selected to study effect of different metal distribution within the crystal on their catalytic activity: Longer synthesis time and consecutive addition of Cu and then Mg (the reverse order did not lead to pure MOF-74 phase) favors the catalytic activity of the resultant materials. Finally, the CoMn combination of two of the three most active metals (samples CuMn, CoMn and CuCo) lead to a bimetallic catalyst with higher catalytic performance than the corresponding monometallic samples., CONACyT grant (687839). This work has been partially financed by the Spanish State Research Agency (AEI), the European Regional Development Fund (FEDER) through the Project MAT2016–77496-R (AEI/FEDER, UE), 2019AEP076 (CVCSIC-AEPP-Ayudas Extraordinarias para preparación de proyectos 2019), PAPIIT UNAM Mexico (IN101517) and CONACyT (1789) projects. This work has been also financed by the CONACyT project A1–5-30646.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent free epoxidation of vernonia oil using Ti-SBA-15 with tailor made particle morphology and pore size

  • Awoke, Yaregal
  • Chebude, Yonas
  • Márquez Álvarez, Carlos
  • Díaz Carretero, Isabel
[EN] Vernonia galamensis is a native weed of Ethiopia containing high concentration of naturally epoxidized oil (glyceryl trivernolate) in its seeds, which could be used as a potential substitute for currently used epoxy oils. Apart from an epoxy group, vernolic acid contains a double bond that could be further epoxidized yielding a low viscosity, high oxirane, non-edible oil. Epoxidized vegetable oils are usually produced at industrial scale mainly by the peracid process. Soluble mineral acids are essential for this process but these acidic components lead to several drawbacks. Our study deals with a solvent free epoxidation of vernonia oil using heterogeneous catalysts. Ordered mesoporous materials are good candidates as catalysts for epoxidation reactions of large molecules such as vernonia oil (MW =926 g/mol). The aim of this work is to obtain titanium containing SBA-15 catalysts with tunable pore size and convenient particle morphology to avoid diffusion problems. Titanium was incorporated in SBA-15 catalysts by co-condensation as well as grafting methods in order to compare their catalytic performance. Ti-SBA-15 materials with hexagonal symmetry, surface area between 368 and 888 m/g, high pore volume (0.75-1.41 cm/g) and average pore diameter ranging from 7.2 to 14.3 nm have been successfully synthesized. The long fibers commonly observed in SBA-15 could be avoided obtaining small crystals with plate morphology having the channels running along the short axis of the crystal. DR UV-vis and ICP-OES studies revealed that Ti has been successfully incorporated as isolated Ti(IV) species in SBA-15 while maintaining good textural properties. Ti was also incorporated in hydrophobic PMO supports by co-condensation and grafting for comparative purposes. Epoxidation of vernonia oil was carried out using anhydrous TBHP as an oxidant without any organic solvent at 70 °C. Titanium-grafted, large-pore size SBA-15 (TiCgESBAL) yielded 71% conversion with more than 80% selectivity, while short-channel Ti-SBA-15 and Ti-PMO showed the highest selectivity towards epoxide., Spanish Ministry of Science, Innovation and Universities (formerly the Ministry of Economy and Competitiveness), Project MAT2016-77496-R (AEI/FEDER, UE), and CSIC, Project iCOOP+2016 COOPA20136, and the School of Chemistry, University of Nottingham, for supplying scCO2-extracted VO. We thank Chemistry Department, Addis Ababa University, and BETAQUIMICA for their support. YA also acknowledges Assosa University for financial support, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling Particle Morphology and Pore Size in the Synthesis of Ordered Mesoporous Materials

  • Awoke, Yaregal
  • Chebude, Yonas
  • Díaz Carretero, Isabel
[EN] Ordered mesoporous materials have attracted considerable attention due to their potential applications in catalysis, adsorption, and separation technologies, as well as biomedical applications. In the present manuscript, we aim at a rational design to obtain the desired surface functionality (Ti and/or hydrophobic groups) while obtaining short channels (short diffusion paths) and large pore size (>10 nm). Santa Barbara Amorphous material SBA-15 and periodic mesoporous organosilica PMO materials are synthesized using Pluronic PE 10400 (P104) surfactant under mild acidic conditions to obtain hexagonal platelet-like particles with very short mesochannels (300-450 nm). The use of expanders, such as 1, 3, 5-trimethylbenzene (TMB) and 1, 3, 5-triisopropylbenzene (TIPB) were tested in order to increase the pore size. TMB yielded in the formation of vesicles in all the syntheses attempted, whereas P104 combined with TIPB resulted both in expanded (E) E-SBA-15 and E-PMO with 12.3 nm pore size short channel particles in both cases. Furthermore, the synthesis method was expanded to the incorporation of small amount of Ti via co-condensation method using titanocene as titanium source. As a result, Ti-E-SBA-15 was obtained with 15.5 nm pore size and isolated Ti-sites maintaining platelet hexagonal morphology. Ti-PMO was obtained with 7.8 nm and short channels, although the pore size under the tried synthesis conditions could not be expanded further without losing the structural ordering., This work has been funded by the Spanish Research Agency (AEI) and the European Regional Development Fund (FEDER) through the Project MAT2016-77496-R, and CSIC Project iCOOP+2016 COOPA20136 and CSIC Project number 2019AEP076.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SBA-15 with short channels for laccase immobilization

  • Khanmohammad, Faezeh
  • Molina Esquinas, Asunción
  • Blanco Martín, Rosa María
  • Azizi, Seyed Naser
  • Márquez Álvarez, Carlos
  • Díaz Carretero, Isabel
[EN] Ordered Mesoporous Materials offer wide application areas in chemistry and biotechnology. SBA-15 displays hexagonal arrangement of parallel unidirectional channels, where pore size and particle morphology are the controlling parameters when used as enzyme support to favour the diffusion of the protein molecules. The synthesis conditions can be controlled to yield the desired structural and morphological features of the material, as well as the functionalization of its surface to improve chemical affinity with the enzyme. Functionalization with amine groups has been performed to immobilize laccase on SBA-15. Particles of SBA-15 with short channels (300–500 nm length) and large pore diameter (10–14 nm) have been obtained. The experimental parameters varied to control the structural features were surfactant, micelle expander and silica source. Upon functionalization with amine groups, laccase was immobilized at a pH in the range between the isoelectric point of the enzyme (pI = 4.2) and the pKa value of the amino groups (~10) via non-covalent (electrostatic) interaction between carboxylate groups of the enzyme and the protonated amino groups. The enzyme was successfully immobilized on all the supports tested (loading from 18 to 57 mg/g) with fair catalytic activity and observing enzyme desorption (leaching) below 9% after 48 h in all cases., This work has been funded by the Spanish Research Agency (AEI) and the European Regional Development Fund (FEDER) through the Project MAT2016-77496-R. M.A.M. acknowledges MINECO for graduate student contract BES-2017-082077. The support of CYTED (Ibero-American Program on Science and Technology for Development) under the LIDA Thematic Network is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyaniline supported CdS/CeO2/Ag3PO4 nanocomposite: An “A-B” type tandem n-n heterojunctions with enhanced photocatalytic activity

  • Taddesse, Abi M.
  • Bekele, Tigabu
  • Díaz Carretero, Isabel
  • Adgo, Abebaw
[EN] In the present work, ternary composites of the form CdS/CeO/AgPO with CdS:CeO/AgPO molar ratios of (1:1, 2:1, 3:1 and 4:1) were synthesized by co-precipitation method. Polyaniline supported CdS/CeO/AgPO nanocomposite was also synthesized by “in situ” chemical oxidative method. Physicochemical properties of the photocatalyst materials were determined using XRD, BET, SEM-EDX, TEM, UV/Vis, FTIR and PL techniques. Photocatalytic activities of the ternary CdS/CeO/AgPO (1:1, 2:1, 3:1 and 4:1 molar ratios) nanocomposites were found to be higher than their single and binary counterparts. The effects of different operational parameters such as pH, initial dye concentration, photocatalyst load and scavengers in MeO dye degradation study confirmed the following optimum values: pH 4, initial dye concentration 10 ppm and photocatalyst load 0.15 g/L. The effects of different scavengers suggest that •O- and •OH scavengers play major roles in the degradation of MeO. The supported photocatalyst exhibited a relatively higher efficiency (93.4%) on the photodegradation of MeO dye. In addition, it showed fairly well photocatalytic activity (70.7%), for the textile effluent collected from one of the local textile industries. Furthermore, the reusability of the supported photocatalyst was tested. About 80% of the catalyst efficiency was maintained after four successive runs exhibiting the potential application of this novel composite for degradation of MO dye from aquatics system., Ministry of Education through office of the Research and Extension, Haramaya University (HURG-2016-03-02). I. D. acknowledges the funding from CSIC (2019AEP076), the Spanish Research Agency (AEI) and the European Regional Development Fund (FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding electron transfer processes and oxygen reduction electrocatalysis in nanocrystalline Cu-MOF-74

  • Rodríguez, Sara L.
  • Sánchez Sánchez, Manuel
  • Zamaro, Juan M.
  • Fernández, José L.
[EN] Metal-organic frameworks (MOFs) with redox properties are potentially good candidates as noble-metal free electrocatalysts due to their high specific surface area, uniform pore size and shape, and high dispersion of redox centers. Copper-based MOFs are particularly interesting as oxygen reduction electrocatalysts due to the well-known bio-affinity of this element towards oxygen in oxygen-reducing proteins. In this line, the metal–organic framework Cu-MOF-74, which has open metal sites in its 3D structure has not been studied up to date as electrocatalyst for the oxygen reduction reaction (ORR). This work reports an exhaustive electrochemical analysis of nanocrystalline Cu-MOF-74, for assessing its electrochemical behavior and electrocatalytic performance for the ORR. Nanocrystals of Cu-MOF-74 (about 40 nm in size) with intercrystal mesoporosity and high surface area (>1000 mg) were synthesized by a previously reported procedure. The study of this material supported on glassy carbon (GC) rotating disk electrodes allowed to prove its good stability in neutral electrolytic medium and an efficient connectivity of the open Cu centers with redox ability. Moreover, GC/Cu-MOF-74 electrodes were capable to efficient electro-reduce dissolved oxygen to water at overpotentials higher than −0.62 V, fully preserving the framework integrity after long-time assays. It was also verified that this four-electron process is mediated by the reduction of Cu centers exposed at the inner walls of the MOF pores, involving electro-adsorbed oxygenated intermediates. The location of the active sites inside the deep structural nanopores strongly affects the mass transport properties and is detrimental for the whole performance as ORR electrocatalyst. Thus, while the results reported here provide new evidences on the redox and electrocatalytic behavior of nanocrystalline Cu-MOF-74, it is clear that its configuration must be rethought in order to attain an acceptable ORR performance., We acknowledge the financial support from Agencia Nacional de Promoción Científica y Tecnológica of Argentina (Projects PICT 2241 and 1340) and Universidad Nacional del Litoral (Project CAI+D 0071 and 0118). This work was also partially funded by Agencia Estatal de Investigación of Spain (AEI) and Project MAT2016-77496-R (AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two additives to improve stability of immobilized lipase

  • Blanco Martín, Rosa María
  • Roldán, Ismael
The presence of two different additives during non-covalent immobilization of lipase was studied. Lipase was immobilized via hydrophobic interactions on an amorphous silica with large pore size bearing octyl groups on the surface. Polyethyleneglycol (PEG) with different molecular weights (MW: 1500, 3000 and 10,000) were added to the suspension during enzyme immobilization, in an enzyme to PEG molar ratio of 1:10, and also 1:20 in the case of PEG1500. The activity after 15 d increased from 10% (absence of PEG) to values close to 40% in samples with PEG except the catalyst immobilized in the presence of 1:10 PEG1500, which kept fully active after 15 d incubation in toluene at 70 °C. The presence of water during storage of immobilized enzymes leads to significant activity loss. Saturated solutions of salts controlling the water activity of the systems were used to reduce in a controlled fashion the moisture of the systems: CaCl2 (aw= 0.037), MgCl2 (aw= 0.328), Mg(NO3)2 (aw= 0.529), Na2PO4.12H2O (aw= 0.74) and KCl (aw= 0.84). The immobilized lipase was suspended in saturated solutions of these salts, and then filtered and incubated in desiccators in the presence of the corresponding saturated salt solutions. Catalysts suspended and incubated in KCl or only suspended in phosphate kept some 20% activity after 33 d incubation whereas the maximal stability was achieved when the catalyst was suspended in phosphate and kept in a desiccator without salt solution. This catalyst kept around 50% activity after 33 d incubation. An inversely proportional relationship can be established between the stability achieved by the enzyme and the water content of the system. © 2017 CSIC. Spain., This work has been partially financed by the Spanish State Research Agency (Agencia Espa~nola de Investigaci on, AEI) and the European Regional Development Fund (Fondo Europeo de Desarrollo Regional, FEDER) through the Project MAT2016-77496-R (AEI/FEDER, UE) and the Spanish Ministry of Economy and Competitiveness (Project MAT2015- 65767-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Successful encapsulation of β-glucosidase during the synthesis of siliceous mesostructured materials

  • Gascón Pérez, Victoria
  • Márquez Álvarez, Carlos
  • Blanco Martín, Rosa María
BACKGROUND: The biocatalysis field demands ‘universal’ supports able to encapsulate enzymes with a straightforward methodology, and at the same time, capable of retaining their catalytic activity. The employment of siliceous materials for such a purpose is a big challenge because drastic synthesis conditions are required and improved functionalization is needed to increase affinities towards the targeted enzyme. In this work, a compromise between the development of a well-formed mesostructured support and an acceptable enzymatic activity was attempted via the in-situ immobilization approach. RESULTS: The immobilization of β-glucosidase (EC 3.2.1.21) from Aspergillus niger was approached using different strategies. After trying to immobilize β-glucosidase with a post-synthesis approach, nonhigh loadings were achieved both with covalent linkage (using epoxy activated supports; 3.5 mgE g−1) and with noncovalent bonding (using amine-functionalized materials; 7.6 mgE g−1). However, when the in-situ approach was attempted, success in reaching the highest enzyme loading (close to 200 mgE g−1) was achieved. CONCLUSION: In this work, the support cages around the in-situ encapsulated enzyme fully prevented its release through the narrow windows connecting cages, achieving a less than 5% release of the initially desorbed protein, as well as a further total absence of leaching. This enabled the biocatalyst to be reused at least eight times more without any loss in activity. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry, This work has been partially financed by the Spanish State Research Agency (Agencia Española de Investigación, AEI) and theEuropean Regional Development Fund (Fondo Europeo de Desar-rollo Regional, FEDER) through the Project MAT2016-77496-R(AEI/FEDER, UE). The authors thank Dr. Alvaro Mayoral and theLaboratory of Advanced Microscopy (LMA) in the NanoscienceInstitute of Aragon (INA) at the University of Zaragoza for hiscontribution with STEM images, Mr. Ramiro Martínez (Novozymes,Spain) for the 𝛽-glucosidase samples, and Mr. Carlos Isam BachourSirerol for critical comments on the manuscript, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled manipulation of enzyme specificity through immobilization-induced flexibility constraints

  • Coscolín, Cristina
  • Beloqui, Ana
  • Martínez-Martínez, Mónica
  • Bargiela, Rafael
  • Santiago, Gerard
  • Blanco Martín, Rosa María
  • Delaittre, Guillaume
  • Márquez Álvarez, Carlos
  • Ferrer, Manuel
It is thought that during immobilization enzymes, as dynamic biomolecules, may become distorted and this may alter their catalytic properties. However, the effects of different immobilization strategies on enzyme rigidity or flexibility and their consequences in specificity and stereochemistry at large scale has not been yet clearly evaluated and understood. This was here investigated by using as model an ester hydrolase, isolated from a bacterium inhabiting a karstic lake, with broad substrate spectrum (72 esters being converted; 61.5 U mg−1 for glyceryl tripropionate) but initially non-enantiospecific. We found that the enzyme (7 nm × 4.4 nm × 4.2 nm) could be efficiently ionic exchanged inside the pores (9.3 nm under dry conditions) of amino-functionalized ordered mesoporous material (NH2-SBA-15), achieving a protein load of 48 mg g−1, and a specific activity of 4.5 ± 0.1 U mg−1. When the enzyme was site-directed immobilized through His interaction with an immobilized cationon the surface of two types of magnetic micro-particles through hexahistidine-tags, protein loads up to 10.2 μg g−1 and specific activities of up to 29.9 ± 0.3 U mg−1, were obtained. We found that ionically exchanged enzyme inside pores of NH2-SBA-15 drastically narrowed the substrate range (17 esters), to an extent much higher than ionically exchanged enzyme on the surface of magnetic micro-particles (up to 61 esters). This is attributed to differences in surface chemistry, particle size, and substrate accessibility to the active site tunnel. Our results also suggested, for the first time, that immobilization of enzymes in pores of similar size may alter the enzyme structures and produce enzyme active centers with different configuration which promote stereochemical conversions in a manner different to those arising from surface immobilization, where the strength of the ionic exchange also has an influence. This was shown by demonstrating that when the enzyme was introduced inside pores with a diameter (under dry conditions) slightly higher than that of the enzyme crystal structure a biocatalyst enantiospecific for ethyl (R)-4-chloro-3-hydroxybutyrate was produced, a feature not found when using wider pores. By contrast, immobilization on the surface of ferromagnetic microparticles produced selective biocatalysts for methyl (S)-(+)-mandelate or methyl (S)-lactate depending on the functionalization. This study illustrates the benefits of extensive analysis of the substrate spectra to better understand the effects of different immobilization strategies on enzyme flexibility/rigidity, as well as substrate specificity and stereochemistry. Our results will help to design tunable materials and interfaces for a controlled manipulation of specificity and to transform non-enantiospecific enzymes into stereo-chemically substrate promiscuous biocatalysts capable of converting multiple chiral molecules. © 2018 The Author(s), This project received funding from the European Union’s Horizon 2020 research and innovation program Blue Growth: Unlockingthe potential of Seas and Oceans under grant agreement no. 634486 (project acronym INMARE). This research was also supported by the grants PCIN-2014-107 (within ERA NET IB2 grant nr. ERA-IB-14-030 - MetaCat), PCIN-2017-078 (within the ERA-MarineBiotech grant ProBone), BIO2014-54494-R, MAT2016-77496-R, BIO2017-85522-R, and CTQ2016-79138-R from the Spanish Ministry of Economy, Industry and Competitiveness. A.B. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness (MAT2017-88808- R grant), María de Maeztu Units of Excellence Programme (MDM-2016- 0618), and the Diputación de Guipúzcoa for current funding in the frame of Gipuzkoa Fellows program. G.D. thanks the German Federal Ministry of Education and Research (BMBF, Grant No. 031A095C) for funding in the frame of the Molecular Interaction Engineering program (Biotechnologie 2020+). The authors gratefully acknowledge financial support provided by the European Regional Development Fund (ERDF). C.C. thanks the Spanish Ministry of Economy, Industry and Competitiveness for a PhD fellowship (Grant BES-2015-073829)., Supplementary material related to this article can be found, in the online version, at doi: https://doi.org/10.1016/j.apcata.2018.08.003, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sustainable preparation of MIL-100(Fe) and its photocatalytic behavior in the degradation of methyl orange in water

  • Guesh, K.
  • Caiuby, C. A. D.
  • Mayoral, A.
  • Diaz-Garcia, M.
  • Diaz, I.
  • Sanchez-Sanchez, M.
The real industrial establishment of MOFs requires significant advances in economic and chemical sustainability. This work describes a novel and simple method to prepare one of the most widely studied MOF material, i.e. MIL-100(Fe), which significantly improves the sustainability of the conventional process in several aspects. Interestingly, the only difference in the preparation method of MIL-100(Fe) compared with that of semi-amorphous Fe-BTC (MOF material commercialized as Basolite F300 having the same metal and linker, and which can be also prepared under similar sustainable conditions), is to start from Fe(II) or Fe(III) sources, respectively, which opens certain versatility options in the room temperature synthesis procedures of MOF materials. The prepared samples were characterized using XRD, TGA, N2 adsorption/ desorption isotherms, Cs-aberration corrected STEM and UV-Vis DRS. These two room-temperature-made Fe-BTC materials were tested in the industrially-demanded photocatalytic degradation of methyl orange under both ultraviolet and solar light radiation. MIL-100(Fe) was a very active photocatalyst in comparison with its homologue. That difference was mainly attributed to the presence of larger cavities within its structure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of zeolite A using raw kaolin from Ethiopia and its application in removal of Cr(III) from tannery wastewater

  • Ayele, L.
  • Perez-Velilla, E.
  • Mayoral, A.
  • Chebude, Y.
  • Diaz, I.
BACKGROUND: The commercial production of zeolite A mainly involves costly synthetic chemicals. However, cheaper raw materials such as clay minerals, coal ashes, natural zeolites, solid wastes and industrial sludge have been tested. Based on this, the objective of the present study is synthesis of zeolite A from two sources of raw kaolins (Ansho and Bombowha) from Ethiopia and evaluation of its application in tannery wastewater treatment. RESULTS: The synthesis result indicated high crystallinity (>90%) of zeolite A using Ansho kaolin. Lower grade Bombowha kaolin yielded zeolite A with crystallinity of 80%. In the tannery wastewater treatment study, a real sample having chromium concentration of 2036 mg L-1 was treated, obtaining 99.8% removal and about 200 mg g-1 adsorption capacity of Cr(III) using 100 g L-1 and 5 g L-1 adsorbent dose, respectively. This indicated that the synthesized zeolite A has great potential for Cr(III) removal from tannery wastewater. CONCLUSION: In this study, zeolite A has been synthesized from two sources of kaolin from Ethiopia and has been evaluated in tannery wastewater treatment. The synthesis result indicated the formation of crystals of zeolite A with optimum crystallinity of 91% and the material exhibited chromium removal efficiency of 99.8%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Observation of Ag Nanoparticles in/on Ag@MIL-100(Fe) Prepared Through Different Procedures

  • Mahugo, R.
  • Mayoral, A.
  • Sanchez-Sanchez, M.
  • Diaz, I.
Loading of active metals, metal clusters, and/or metal nanoparticles in Metal Organic Frameworks (MOFs) is an emergent field with applications in sensors, catalysis, medicine, and even in the polymeric industry. In the present work, MIL-100(Fe) has been synthesized and reacted with AgNO3 through liquid and incipient wetness, and also through solid-state reaction or solid grinding. The aim of this study is to evaluate whether the MIL-100 would uptake metal particles using a similar principle as that of the ion exchange in zeolites, or else, their inherent humidity would favor the “dissolution” of the metal salt, thus yielding very small metal particles. The immobilization of Ag nanoparticles inside the MOF pores was identified by Cs-corrected scanning transmission electron microscopy (Cs-corrected STEM) techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structural characterization of HPM-7, a more ordered than expected germanosilicate zeolite

  • Lu, Peng
  • Zhang, Yaping
  • Mayoral, Alvaro
  • Gómez-Hortigüela, Luis
  • Camblor, Miguel A.
HPM-7, a germanosilicate synthesized using long imidazolium-based dications with two different linkers, is shown to possess the POS topology, although disorder may exist but it is very difficult to discern. First, three simple ordered polymorphs (POS-A to POS-C) with very similar energies and structural motifs could give rise to intergrowths that would be very difficult to recognize by powder X-ray diffraction, according to DIFFaX simulations. Another four structures (POS-D to POS-G) can be derived from POS by changing the orientation of two single four rings within the structure, possibly providing an additional source of disorder. While 3D EDT strongly suggests that HPM-7 basically possesses the POS-A (i.e. POS) topology, a detailed HR-STEM study demonstrates the rare existence of some disorder compatible with the polymorph POS-D. The general avoidance of polymorphs with very similar structural motifs and comparable energies points to a rather specific structure-direction by the organic dications used.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of large-pore zeolites from chiral structure-directing agents with two l-prolinol units

  • Gómez-Hortigüela, L.
  • Mayoral, Á.
  • Liu, H.
  • Sierra, L.
  • Vaquerizo, L.
  • Mompeán, C.
  • Pérez-Pariente, J.
In this work, we perform an in-depth experimental and computational study about the structure-directing effect of two new chiral organic quaternary ammonium dications bearing two N-methyl-prolinol units linked by a xylene spacer in para or meta relative orientation, displaying four enantiopure stereogenic centers in (S) configuration. Synthesis results show that the para-xylene derivative is an efficient structure-directing agent, promoting the crystallization of ZSM-12 (in pure-silica composition), beta zeolite (as pure-silica, or in the presence of Al or Ge), and a mixture of polymorphs C, A and B of zeolite beta (in the presence of Ge). In contrast, the meta-xylene derivative showed a much poorer structure-directing activity, yielding only amorphous materials unless Ge is present in the gel, where beta and polymorph C (together with A and B) zeolites crystallized. Molecular simulations showed that the para-xylene dication displays a cylindrical shape suitable for confining in zeolite pores, while the meta-xylene derivative has an angular shape that shifts from the typical dimensions required for 12MR zeolite channels. Despite enantio-purity of the para-xylene dication with (S, S, S, S) configuration, no enrichment in polymorph A of the zeolite beta samples obtained was observed by Transmission Electron Microscopy. With the aid of molecular simulations, the failure in transferring chirality to the zeolite is explained by the loose fit of this SDA in the large-pores of zeolite beta, and a lack of close geometrical fit with the chiral element of polymorph A, as evidenced by the very similar interaction of the cation with the two enantiomorphic space groups of polymorph A. Nevertheless, the molecular-level knowledge gained in this work can provide insights for the future design of more efficient SDAs towards the synthesis of chiral zeolites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modulation of the Activity of Gold Clusters Immobilized on Functionalized Mesoporous Materials in the Oxidation of Cyclohexene via the Functional Group. The Case of Aminopropyl Moiety

  • Mato, A.
  • Agúndez, J.
  • Márquez-Álvarez, C.
  • Mayoral, Á.
  • Pérez-Pariente, J.
Gold nanoclusters and isolated gold atoms have been produced in a two-liquid phase procedure that involves a solution of gold in aqua regia and rosemary essential oil as organic layer. These gold entities have been immobilized on the ordered mesoporous silica material SBA-15 functionalized with different amounts of aminopropyl groups. The resulting materials have been characterized by XRD, N2 adsorption, chemical analysis, TGA, 29Si MAS NMR, 13C CP/MAS NMR, UV-vis spectroscopy, XPS, and STEM. The Au-containing materials retain the ordering and porosity of the pristine support. Gold content varies in the range of 0.07-0.7 wt% as a function of the specific immobilization conditions, while STEM evidences the presence of isolated gold atoms. XPS shows a shift of the Au 4f BE toward values lower than those of metallic gold. The catalytic activity in the oxidation of cyclohexene with molecular oxygen at atmospheric pressure parallels the Au content of the aminopropyl-SBA-15 supports. This activity is higher than that of analogous Au entities immobilized on SBA-15 functionalized with thiol or sulfonate groups, the activity decreasing in the order Au-NH2 > Au-SO3- > Au-SH. This behavior has been attributed to differences in the interaction strength between the functional group and the Au entities, which is optimum for the aminopropyl groups.