Pasar al contenido principal

NUEVAS ARQUITECTURAS BASADAS EN NANOSESTRUCTURAS CON SB PARA APLICACIONES FOTOVOLTACIAS DE ALTA EFICIENCIA

MAT2016-77491-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Modelling of the Sb and N distribution in type II GaAsSb/GaAsN superlattices for solar cell applications

  • Fernández de los Reyes, Daniel
  • Braza Blanco, María Verónica
  • Gonzalo, A.
  • Utrilla, A.D.
  • Ulloa, J.M.
  • Ben Fernández, Teresa
  • González Robledo, David
GaAsSbN dilute nitrides are potential candidates for integration in high-performance multi-junction solar cells due to the bandgap tunability in the 1.0–1.15 eV range and the possibility to match the lattice constant to the GaAs substrates. Recently, the use of GaAsSb/GaAsN superlattices (SLs) has been shown as an effective way to enhance photovoltaic efficiency as compared to the quaternary counterparts. Here we apply a combination of HR-XRD and cross-sectional (S)TEM techniques together with theoretical calculations to analyse the compositional distribution in GaAsSb/GaAsN SLs with different periodicity. The measurements of compositional profiles indicate that Sb is strongly segregated into the GaAsN layers while N remains confined where it is deposited. We demonstrate that the Sb profiles run as a shark-fin waveform that can be precisely described with a one-dimensional model where segregation of the supplied Sb is promoted by a three-layer fluid exchange mechanism. Moreover, the role played by the periodicity in the effectiveness of the Sb incorporation adds a new level of complexity. The modelling of Sb segregation in the GaAsSb/GaAsN SLs system could be used to carry out more precise pseudopotential calculations on the band structure in order to understand and predict their electrical and optical behaviour.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Tailoring of AlAs/InAs/GaAs QDs Nanostructures via Capping Growth Rate

  • Ruiz Marín, Nazaret
  • Fernández de los Reyes, Daniel
  • Luna, Esperanza
  • Stanojevic, Lazar
  • Ben Fernández, Teresa
  • Flores Gallegos, Sara
  • Braza Blanco, María Verónica
  • Gallego-Carro, A.
  • Barcena González, Guillermo
  • Yañez Escolano, Andrés
  • Ulloa, José María
  • González Robledo, David
The use of thin AlA capping layers (CLs) on InAs quantum dots (QDs) has recently received considerable attention due to improved photovoltaic performance in QD solar cells. However, there is little data on the structural changes that occur during capping and their relation to different growth conditions. In this work, we studied the effect of AlA capping growth rate (CGR) on the structural features of InAs QDs in terms of shape, size, density, and average content. As will be shown, there are notable differences in the characteristics of the QDs upon changing CGR. The Al distribution analysis in the CL around the QDs was revealed to be the key. On the one hand, for the lowest CGR, Al has a homogeneous distribution over the entire surface, but there is a large thickening of the CL on the sides of the QD. As a result, the QDs are lower, lenticular in shape, but richer in In. On the other hand, for the higher CGRs, Al accumulates preferentially around the QD but with a more uniform thickness, resulting in taller QDs, which progressively adopt a truncated pyramidal shape. Surprisingly, intermediate CGRs do not improve either of these behaviors, resulting in less enriched QDs.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Dietary aflatoxin B1 (AFB1) reduces growth performance, impacting growth axis, metabolism, and tissue integrity in juvenile gilthead sea bream (Sparus aurata)

  • Barany Ruiz, Andre
  • Guilloto, M.
  • Cosano, J.
  • de Boevre, M.
  • Oliva Ramírez, Milagrosa
  • de Saeger, S.
  • Fuentes, J.
  • Martínez-Rodríguez, Gonzalo
  • Mancera Romero, Juan Miguel
La contaminación por micotoxinas es una amenaza creciente para todas las materias primas provenientes de la agricultura, esperándose que su incidencia aumente ligada al cambio climático. En este trabajo, se examinó el impacto de la aflatoxina B1 (AFB1) a través de la dieta (1 y 2 mg AFB1 kg-1 pienso) sobre diversos procesos fisiológico de la dorada (Sparus aurata). La inclusión de AFB1 en la dieta resultó en una inhibición del 80 % del potencial peso total durante el ensayo de 85 días. Los metabolitos energéticos, específicamente glucídicos y lipídicos, presentes en plasma e hígado disminuyeron sus niveles. Los análisis histopatológicos revelaron varias anomalías tisulares en el hígado, riñón, y bazo. Además, la expresión génica de los componentes del eje del crecimiento se vio alterado por la AFB1. De este modo, la expresión de gh en adenohipófisis mostró una relación inversa respecto a la expresión de igf1 en hígado. Por su parte, los niveles de expresión génica de biomarcadores de estrés (e.g., los factores hipotalámicos trh, crh y crhbp, y star en el riñón cefálico) mostraron una relación lineal directa con las dosis de AFB1. Sin embargo, los niveles plasmáticos de cortisol no se vieron afectados. En general, nuestros resultados muestran que piensos contaminados con AFB1 inhiben el crecimiento, alteran el metabolismo, la integridad tisular, y los factores transcriptómicos de los ejes de crecimiento y estrés regulatorios. Sin embargo, no encontramos residuo de AFB1 ni en hígado ni en músculo.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Effect of the AlAs capping layer thickness on the structure of InAs/GaAs QD

  • Ruiz Marín, Nazaret
  • Fernández de los Reyes, Daniel
  • Stanojevic, L.
  • Ben Fernández, Teresa
  • Braza Blanco, María Verónica
  • Gallego-Carro, A.
  • Barcena González, Guillermo
  • Ulloa, J.M.
  • González Robledo, David
Recently, very thin AlAs capping layers (CLs) have been proposed as a useful tool to increase the performance of InAs/GaAs quantum dot (QDs) devices. However, the structure of QDs after AlAs deposition remains poorly understood and the mechanisms to explain it are often contradictory. In this work, the structural and compositional changes of InAs QDs using different AlAs CL thicknesses have been studied by state-of-the-art STEM-related techniques. First, the heights and In contents of InAs QDs progressively increase with the CL thickness, demonstrating that the AlAs capping produces a strong shielding effect against the decomposition of QDs. However, QD populations for CL thicknesses above 5 ML split into a bimodal distribution in which smaller lenticular QDs cohabit with bigger truncated pyramids. Second, the actual Al contents around the QDs are well below the nominal design, but increasing for thicker CLs. Its distribution is initially non-uniform, tending to accumulate on the flanks of the QDs to the detriment of the apex. Only for thicknesses above 2 ML the Al contents around the QDs start to be similar to those in the regions between the QDs, behaving as a continuous film without irregularities from 5 ML onwards. © 2021 The Author(s), The work has been co-financed by the Spanish National Research Agency (AEI projects MAT2016-77491-C2-2-R and PID2019-106088RB-C33), Regional Government of Andalusia (project FEDER-UCA18-108319) and the European Regional Development Fund (ERDF).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Sb and N Incorporation Interplay in GaAsSbN/GaAs Epilayers near Lattice-Matching Condition for 1.0–1.16-eV Photonic Applications

  • Braza Blanco, María Verónica
  • Fernández de los Reyes, Daniel
  • Gonzalo, A.
  • Utrilla, A.D.
  • Ben Fernández, Teresa
  • Ulloa, J.M.
  • González Robledo, David
As promising candidates for solar cell and photodetection applications in the range 1.0–1.16 eV, the growth of dilute nitride GaAsSbN alloys lattice matched to GaAs is studied. With this aim, we have taken advantage of the temperature gradient in the molecular beam epitaxy reactor to analyse the impact of temperature on the incorporation of Sb and N species according to the wafer radial composition gradients. The results from the combination of X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopies (EDS) show an opposite rate of incorporation between N and Sb as we move away from the centre of the wafer. A competitive behaviour between Sb and N in order to occupy the group-V position is observed that depends on the growth rate and the substrate temperature. The optical properties obtained by photoluminescence are discussed in the frame of the double-band anticrossing model. The growth conditions define two sets of different parameters for the energy level and the coupling interaction potential of N, which must be taken into account in the search for the optimum compositions 1–1.15-eV photonic applications.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

CDrift: An Algorithm to Correct Linear Drift From A Single High-Resolution STEM Image

  • Barcena González, Guillermo
  • Guerrero Lebrero, María de la Paz
  • Guerrero Vázquez, Elisa
  • Yañez Escolano, Andrés
  • Núñez Moraleda, Bernardo Miguel
  • Fernández de los Reyes, Daniel
  • Real, Pedro
  • González Robledo, David
  • Galindo Riaño, Pedro Luis
In this work, a new method to determine and correct the linear drift for any crystalline orientation in a single-column-resolved high-resolution scanning transmission electron microscopy (HR-STEM) image, which is based on angle measurements in the Fourier space, is presented. This proposal supposes a generalization and the improvement of a previous work that needs the presence of two symmetrical planes in the crystalline orientation to be applicable. Now, a mathematical derivation of the drift effect on two families of asymmetric planes in the reciprocal space is inferred. However, though it was not possible to find an analytical solution for all conditions, a simple formula was derived to calculate the drift effect that is exact for three specific rotation angles. Taking this into account, an iterative algorithm based on successive rotation/drift correction steps is devised to remove drift distortions in HR-STEM images. The procedure has been evaluated using a simulated micrograph of a monoclinic material in an orientation where all the reciprocal lattice vectors are different. The algorithm only needs four iterations to resolve a 15° drift angle in the image.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Suppressing the Effect of the Wetting Layer through AlAs Capping in InAs/GaAs QD Structures for Solar Cells Applications

  • Ruiz Marín, Nazaret
  • Fernández de los Reyes, Daniel
  • Stanojevic, Lazar
  • Ben Fernández, Teresa
  • Flores Gallegos, Sara
  • Braza Blanco, María Verónica
  • Gallego-Carro, A.
  • Luna, Esperanza
  • Ulloa, José María
  • González Robledo, David
Recently, thin AlAs capping layers (CLs) on InAs quantum dot solar cells (QDSCs) have been shown to yield better photovoltaic efficiency compared to traditional QDSCs. Although it has been proposed that this improvement is due to the suppression of the capture of photogenerated carriers through the wetting layer (WL) states by a de-wetting process, the mechanisms that operate during this process are not clear. In this work, a structural analysis of the WL characteristics in the AlAs/InAs QD system with different CL-thickness has been made by scanning transmission electron microscopy techniques. First, an exponential decline of the amount of InAs in the WL with the CL thickness increase has been found, far from a complete elimination of the WL. Instead, this reduction is linked to a higher shield effect against QD decomposition. Second, there is no compositional separation between the WL and CL, but rather single layer with a variable content of InAlGaAs. Both effects, the high intermixing and WL reduction cause a drastic change in electronic levels, with the CL making up of 1-2 monolayers being the most effective configuration to reduce the radiative-recombination and minimize the potential barriers for carrier transport., The work has been co-financed by the Spanish National Research Agency (AEI projects MAT2016-77491-C2-2-R and PID2019-106088RB-C33), Regional Government of Andalusia (project FEDER-UCA18-108319) and the European Regional Development Fund (ERDF).