Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis del uso de una sonda electromagnética para el diagnóstico de cáncer colorrectal. Resultados preliminares

  • Nevárez Heredia, Andrea
  • Parra Escrig, Andrea
  • Frasson, Matteo
  • Pons Beltrán, Vicente
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[ES] Múltiples avances tecnológicos se han desarrollado para optimizar la detección temprana de cáncer colorrectal, la mayoría basados en diagnóstico óptico. La diferencia de las propiedades electromagnéticas (constante dieléctrica y conductividad) entre el tejido sano y el tejido tumoral han sido investigadas en tumores como el cáncer de mama, obteniendo resultados prometedores.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

UWB RSS-based Localization for Capsule Endoscopy using a Multilayer Phantom and In Vivo Measurements

  • Barbi, Martina
  • Nevárez, Andrea
  • Pons Beltrán, Vicente
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[EN] In recent years, the localization for capsule endoscopy applications using ultrawideband (UWB) technology has become an attractive field of investigation due to its potential benefits for patients. The literature concerning performance analysis of radio frequency-based localization techniques for in-body applications at UWB frequencies is very limited. Available studies mainly rely on finite-difference time-domain simulations, using digital human models and on experimental measurements by means of homogeneous phantoms. Nevertheless, no realistic analysis based on multilayer phantom measurements or through in vivo experiment has been reported yet. This paper investigates the performance of the received signal strength-based approach for 2-D and 3-D localizations in the UWB frequency band. For 2-D localization, experimental laboratory measurements using a two-layer phantom-based setup have been conducted. For 3-D localization, data from a recently conducted in vivo experiment have been used. Localization accuracy using path loss models, under ideal and non-ideal channel estimation assumptions, is compared. Results show that, under nonideal channel assumption, the relative localization error slightly increases for the 2-D case but not for the in vivo 3-D case. Impact of receivers selection on the localization accuracy has also been investigated for both 2-D and 3-D cases., This work was supported in part by the European Union's H2020 through the MSCA: ITN Program "Wireless in-Body Environment Communication-WiBEC" under Grant 675353, in part by the Programa de Ayudas de Investigacion y Desarrollo, Universitat Politecnica de Valencia under Grant PAID-01-16, and in part by the Ministerio de Economia y Competitividad, Spain, through the European FEDER Funds under Grant TEC2014-60258-C2-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New crustal and lithospheric mantle structure of Alaska from geoid, elevation and thermal inversion analysis further constrained by 3D gravity modelling

  • Carballo, Alberto
  • Jadamec, Margarete
  • Torné, Montserrat
  • Jimenez-Munt, Ivone
  • Fernández Ortiga, Manel
EGU General Assembly 2018, We investigate the lithospheric structure of Alaska and the lateral crustal density variations using a two-stepapproach. First, we calculate the crustal and mantle lithosphere thicknesses from joint geoid and elevationmodeling combined with thermal analysis further constrained by available seismic data. We then compute the 3Dgravity effect of the resulting lithospheric structure to separate the measured Bouguer anomaly into its regionaland local components. The thickest crust (> than 40 km) is observed in the Brooks Range, Wrangell Mountainsand the Alaska Range, while thinnest crust is located in the Aleutian Range and Chugach Mountains (< 30 km).In addition, moderate crustal thickness (in the range of 32 to 36 km, in average) is obtained underneath theYukon-Tanana basin, the Kuskokwim Mountains, Ahklum Mountains, the Yukon-Kuskokwim Coastal Lowlandand in eastern Alaska. The LAB depth map shows that the deepest LAB is located in the western Brooks Range (>180 km) while the shallowest (∼80 km) is observed along the continental side of the Yakutat Block. The obtainedresidual gravity anomalies highlight lateral average crustal density variations which we discus in terms of crustalstructure. Positive residual anomalies delineate the high density crustal rocks of the accreted Wrangellia andComposite terrains while negative values are associated with the sedimentary rocks of the Sadlerochit Mountains., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

New improvements on LitMod package: A tool for integrated geophysical-petrological modelling of the lithosphere and upper mantle

  • Kumar, Ajay
  • Fernández Ortiga, Manel
  • Jimenez-Munt, Ivone
  • Torné, Montserrat
  • Vergés Masip, Jaume
European Geosciences Union General Assembly 2018 Vienna , Austria , 8–13 April 2018, LitMod is a combined geophysical-petrological 2D forward modelling tool developed ten years ago at ICTJACSIC to study the thermal, compositional, density and seismological structure of lithosphere and sublithosphere domains by combining data from petrology, mineral physics and geophysical observables within a self-consistent framework. Here, we present a set of improvements on the different modules of the current version of the LitMod package focused on the graphic user interface (GUI), the average composition of the upper mantle, and the incorporation of anomalous sublithospheric bodies in terms of composition, temperature and seismic velocities. A new GUI has been developed under Python programming language to gain versatility and compatibility with the different operative systems and platforms. We tested several changes in the sublithospheric mantle composition (DMM instead PUM) and in the attenuation parameters (grain size and period) to fit the calculated seismic velocities with those from the ak135 global reference model. None of these changes produce significant variations in the calculated velocity values below 200 km depth and hence, the calculated synthetic tomography from LitMod shows a red shift below this depth. The most interesting improvement is the possibility to incorporate sublithospheric bodies with different chemical compositions, and either anomalous velocities (Vp or Vs) or temperatures, which can be imposed from independent studies for each target region. To this end we increased the range of temperatures up to 2200 ºC in calculating the mineral assemblages and we incorporated anelasticity in calculating the bulk rock seismic velocities and their partial derivatives, such that we can translate temperature anomalies into seismic velocities and vice-versa. Additionally, this new tool permits to calculate coupled-uncoupled elevation to estimate the effects of density anomalies on topography giving an upper bound for dynamic topography under isostatic equilibrium., This research is supported by project SUBITOP (MSCA-ITN-2015-ETN-674899).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Geodynamic modelling of lithosphere subduction and the topographic response to slab tearing. Application to the Gibraltar Arc.

  • Boonma, Kittiphon
Lithospheric slab tearing, the process by which a subducted lithospheric plate is torn apart and sinks into the Earth’s mantle, has been proposed as a cause of significant surface vertical motions. Although this has been linked to the change implied in the isostatic balance in subduction zones, little is known about the mechanisms and rock properties determining the tear propagation and the uplift-subsidence rates involved. This thesis aims to explore the link between the tearing of subducted lithospheric slabs and the associated vertical motions. To this purpose, I first explore the mechanisms controlling the buoyancy of a subducted lithosphere and then, with this understanding, numerically simulate the process of lithospheric tearing upon continental collision, using the Betic Cordillera as a reference scenario where such tearing-uplift interaction has been proposed for this region. With a mineral-physics approach, where a lithospheric mantle can be less dense than the underlying asthenosphere, I explore the controls on lithospheric buoyancy using a 2D thermal- diffusive model of plate convergence. Five chemical compositions and tectonothermal ages were considered, namely Archon (> 2.5 Ga), Proton ( 2.5 − 1.0 Ga), Tecton (< 1.0 Ga), and two oceanic lithospheric plates of 30 Ma and 120 Ma. While the advection of colder rock in oceanic-like plates always results in negative buoyancy, Protons and Tectons exhibit an ability to slowly flip from negative to positive buoyancy at low convergence rates: they first favour the sinking due to advection and then become more buoyant because they are thinner and heat up faster during subduction. In contrast, the lighter density of cratons (Archons) overprints this effect and hinders delamination or subduction, regardless of the convergence rate. This may explain why Archons are more stable during the Wilson Cycle Having gained these insights into the role of lithospheric buoyancy in subduction settings, I then set to explore the characteristics surrounding lithospheric slab tearing and the asso- ciated surface uplift. I used 3D thermo-mechanical numerical modelling to investigate the geodynamic parameters affecting the slab-tearing initiation and its lateral propagation, and to quantify the corresponding surface vertical motions. The Betics-inspired model suggests x that the obliquity of the continental passive margin (relative to the trench axis) is a major influence on the initiation of slab tearing because it promotes a laterally diachronous conti- nental collision which leads to slab tearing. The model illustrates an east-to-west slab tearing (tearing velocity ∼ 37.6 − 67.6 cm/yr with the lower-mantle viscosity of up to 1022 Pa·s), which leads to surface uplift signature of 0.5 − 1.5 km across the forearc region throughout the tearing process. While the fast slab tearing (< 2 Myr over 600 km wide slab) and the lack of arcuate slab in my models limit a direct comparison with the Western Mediterranean, this approach provides a new insight into the link between slab tearing in the mantle and surface uplift. My models yield uplift rates of 0.23 − 2.16 mm/yr, as a result of slab tearing, which is compatible with the uplift rate needed to achieve an equilibrium between seaway-uplift and seaway-erosion which could have led to the closure of marine gateways that reduced the water-flow from the Atlantic Ocean into the Mediterranean Sea during the first stage of the Messinian Salinity Crisis, This work has been supported by EU Marie Curie Initial Training Network ‘SUBITOP’ (674899-SUBITOP-H2020-MSCA-ITN-2015) and MITE (Spanish Government national research program; CGL2014- 59516). This thesis has been developed using the facilities of the Laboratory of Geodynamic Modelling from Geo3Bcn-CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Embedded 3D Printing in Self-Healing Annealable Composites for Precise Patterning of Functionally Mature Human Neural Constructs

  • Kajtez, Janko
  • Wesseler, Milan Finn
  • Birtele, Marcella
  • Khorasgani, Farinaz Riyahi
  • Rylander Ottosson, Daniella
  • Heiskanen, Arto
  • Kamperman, Tom
  • Leijten, Jeroen
  • Martínez-Serrano, Alberto
  • Angelini, Thomas E
  • Larsen, Niels B.
  • Parmar, Malin
  • Lind, Johan U.
  • Emnéus, Jenny
Human in vitro models of neural tissue with tunable microenvironment and defined spatial arrangement are needed to facilitate studies of brain development and disease. Towards this end, embedded printing inside granular gels holds great promise as it allows precise patterning of extremely soft tissue constructs. However, granular printing support formulations are restricted to only a handful of materials. Therefore, there has been a need for novel materials that take advantage of versatile biomimicry of bulk hydrogels while providing high-fidelity support for embedded printing akin to granular gels. To address this need, Authors present a modular platform for bioengineering of neuronal networks via direct embedded 3D printing of human stem cells inside Self-Healing Annealable Particle-Extracellular matrix (SHAPE) composites. SHAPE composites consist of soft microgels immersed in viscous extracellular-matrix solution to enable precise and programmable patterning of human stem cells and consequent generation mature subtype-specific neurons that extend projections into the volume of the annealed support. The developed approach further allows multi-ink deposition, live spatial and temporal monitoring of oxygen levels, as well as creation of vascular-like channels. Due to its modularity and versatility, SHAPE biomanufacturing toolbox has potential to be used in applications beyond functional modeling of mechanically sensitive neural constructs., Lund University Bioimaging Centre (LBIC) is gratefully acknowledged for providing experimental resources for reflectance microscopy. The research was primarily funded by BrainMatTrain European Union Horizon 2020 Programme (No. H2020-MSCA-ITN-2015) under the Marie SkłodowskaCurie Initial Training Network and Grant Agreement No. 676408. J.U.L. would like to acknowledge Lundbeck Foundation (Nos. R250-2017-1425 & R250-2017-1426) and The Independent Research Fund Denmark (No. 8048-00050) for their support. M.P. and J.K. would like to acknowledge Swedish Research Council (grant number 2021-02967) for their support. [Correction added after publication 5 September 2022: One funding informtation was added].
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The role of macroh2a histone variants in cancer

  • Hsu, Chen-Jen
  • Meers, Oliver|||0000-0001-9532-7767
  • Buschbeck, Marcus|||0000-0002-3218-4567
  • Heidel, Florian H.|||0000-0003-2438-1955
The epigenome regulates gene expression and provides a molecular memory of cellular events. A growing body of evidence has highlighted the importance of epigenetic regulation in physiological tissue homeostasis and malignant transformation. Among epigenetic mechanisms, the replacement of replication-coupled histones with histone variants is the least understood. Due to differences in protein sequence and genomic distribution, histone variants contribute to the plasticity of the epigenome. Here, we focus on the family of macroH2A histone variants that are partic-ular in having a tripartite structure consisting of a histone fold, an intrinsically disordered linker and a globular macrodomain. We discuss how these domains mediate different molecular functions related to chromatin architecture, transcription and DNA repair. Dysregulated expression of macroH2A histone variants has been observed in different subtypes of cancer and has variable prognostic impact, depending on cellular context and molecular background. We aim to provide a concise review regarding the context-and isoform-dependent contributions of macroH2A histone variants to cancer development and progression.