Pasar al contenido principal

DESARROLLO DE METODOLOGIAS MATEMATICAS PARA EVALUACION DEL COMPORTAMIENTO TERMO-MECANICO DE LAS RUTAS DE ARRABIO Y ESCORIA DE HORNOS ALTOS

MTM2015-68275-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Transient thermal response with nonlocal radiation of a blast furnace main trough

  • Barral Rodiño, Patricia
  • Pérez Pérez, Luis Javier
  • Quintela Estévez, Peregrina
A mathematical model for the transient thermal behaviour of the main trough of a blast furnace (BF) is presented. The proposed model consists of the transient heat equation with mixed radiation-convection boundary conditions to model the cooling process. The heat equation is coupled with an integral equation posed on the inner boundary, which models the radiative heat exchange on the internal cavity formed by the trough and the refractory cover placed over the trough. The main scope of this work is to address the evolution of the temperature field during a full BF tapping. A reliable algorithm, capable of simulating entire trough campaigns, is presented. The open-source computing platform FEniCS is used to numerically solve the model using a finite element method. A manufactured solution test for the heat diffusion coupled with 2D nonlocal radiation is defined with the purpose of verifying the implementation, comparing the performance of different time discretization schemes and the adaptive time stepping algorithm. Concerning the BF tapping problem, the results show that during the time interval corresponding to a single tapping, the temperature in the radiation enclosure swiftly reaches the steady state value. Nevertheless, to obtain a steady state in the bulk of the solids, much longer time scales are needed due to the large thermal inertia of the structure
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Numerical simulation of the shear stress produced by the hot metal jet on the blast furnace runner

  • Barral Rodiño, Patricia
  • Nicolás Ávila, Begoña
  • Quintela Estévez, Peregrina
During steel casting process a jet of molten metal runs out of the blast furnace hearth and strikes the runner. The continuous impact of hot fluids causes significant damage to its surface, which is made of refractory concrete. In particular, the initial impact on the dry runner is expected to be critical. This work deals with the analysis of the mechanical impact on the runner through the numerical simulation of the process. We propose an incompressible turbulent isothermal Navier-Stokes model, where turbulence is modelled considering two models (standard and SST). The interface dynamics is described by applying the Volume of Fluid (VOF) method, while the surface tension vector is provided by the Continuum Surface model (CSF). Their numerical results are performed in 2D. A comparative analysis of the most suitable transient turbulent multiphase model is presented by simulating benchmark physical experiments. The shear stress arising from the impact of the jet on the runner is also analyzed. An improvement of the classical analytical expression given in [1] is proposed. Both, the chosen turbulence model, and the formulas to compute the shear stress are validated using two benchmark laboratory tests and three numerical experiments. Numerical results are given for the impact of the jet on the dry runner of the blast furnace
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Numerical simulation of the transient heat transfer in a blast furnace main trough during its complete campaign cycle

  • Barral Rodiño, Patricia
  • Pérez Pérez, Luis Javier
  • Quintela Estévez, Peregrina
To achieve higher blast furnace (BF) main trough availability and to minimize the frequency of reparations is a key concern in the steelmaking industry. For this purpose, strategies to assess refractory wear are required, which is heavily influenced by the temperature in the refractory linings. In this work, a mathematical model to assess the transient behaviour of the temperature in a cross-section of a BF main trough during a complete campaign is presented. The scope is to investigate the effect that the casting stops have on the temperature in the trough. A sequence of problems corresponding to each BF tapping and the subsequent stop is determined using process data of a BF. The open-source finite element computing platform FEniCS is employed to solve the model. The discretization and the numerical algorithm have been presented and validated with a manufactured solution test in a previous work. The numerical results show that the effect of the stops during these campaign cycles is non-negligible, preventing the bulk of the solid layers from reaching a steady state. Qualitative agreement with temperature measurements obtained with thermocouples embedded in the trough is observed. Since there is a significant degree of uncertainty concerning the placement of the devices, a minimization problem to adjust their positions within the corresponding feasible regions is proposed. At the identified positions, good levels of fit between the measured and the computed temperatures are achieved. The agreement decreases towards the end of the campaign cycle, being suggestive of severe refractory wear, especially at the laterals of the trough
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

A staggered semi-implicit hybrid FV/FE projection method for weakly compressible flows

  • Bermúdez de Castro López-Varela, Alfredo
  • Busto Ulloa, Saray
  • Dumbser, Michael
  • Ferrín González, José Luis
  • Saavedra, Laura
  • Vázquez Cendón, María Elena
In this article we present a novel staggered semi-implicit hybrid finite-volume/finite-element (FV/FE) method for the resolution of weakly compressible flows in two and three space dimensions. The pressure-based methodology introduced in [1], [2] for viscous incompressible flows is extended here to solve the compressible Navier-Stokes equations. Instead of considering the classical system including the energy conservation equation, we replace it by the pressure evolution equation written in non-conservative form. To ease the discretization of complex spatial domains, face-type unstructured staggered meshes are considered. A projection method allows the decoupling of the computation of the density and linear momentum variables from the pressure. Then, an explicit finite volume scheme is used for the resolution of the transport diffusion equations on the dual mesh, whereas the pressure system is solved implicitly by using continuous finite elements defined on the primal simplex mesh. Consequently, the CFL stability condition depends only on the flow velocity, avoiding the severe time restrictions that might be imposed by the sound velocity in the weakly compressible regime. High order of accuracy in space and time of the transport diffusion stage is attained using a local ADER (LADER) methodology. Moreover, also the CVC Kolgan-type second order in space and first order in time scheme is considered. To prevent spurious oscillations in the presence of shocks, an ENO-based reconstruction, the minmod limiter or the Barth-Jespersen limiter are employed. To show the validity and robustness of our novel staggered semi-implicit hybrid FV/FE scheme, several benchmarks are analysed, showing a good agreement with available exact solutions and numerical reference data from low Mach numbers, up to Mach numbers of the order of unity.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Mathematical modelling and numerical simulation of the heat transfer in a trough of a blast furnace

  • Vázquez Fernández, Sara
  • García-Lengomín, Alejandro
  • Lausín-González, Cristina
  • Quintela Estévez, Peregrina
In this article, we address the numerical simulation of the cross section of a blast furnace (BF) trough to ensure its durability based on the location of the critical isotherms, so the objective is to know the heat transfer from the trough walls in contact with the hot liquids flowing inside (hot metal and slag) to the lining of the trough, which is in contact with air. With this aim, we propose a 2D heat transfer mathematical model which is solved using a finite element method (FEM). The proposed model is based on energy balance equation, and Fourier's law to relate the heat flux and the temperature gradients are assumed. The convective and radiative heat transfers as well as Dirichlet temperatures are included as boundary conditions, and the radiation view factor concept is considered, introducing an additional nonlinearity in the model. This factor plays a key role in the radiation heat transfer between the slag surface and the wall inside the trough in contact with air, which receives the radiation of the slag. The proposed 2D heat transfer model is applied in two sections: at the middle of the trough and downstream. The numerical simulations are performed using a FEM, and their numerical results are compared with the experimental data from a measurements campaign in a BF. The results demonstrate that the model can reproduce quite accurately the temperature distribution in BF troughs.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Numerical simulation of natural convection and boil-off in a small size pressurized LNG storage tank

  • Ferrín González, José Luis
  • Pérez Pérez, Luis Javier
A numerical simulation of the flow of LNG stored in a small-sized cylindrical tank is presented. The main scope of this work is to characterize the heat ingress to the tank as well as the boil-off rate, depending on the filling level and the insulation layer thickness. The tank is assumed to be in a state of inactivity, such that the fluid phases are initially quiescent and are not released to the exterior. The proposed mathematical model consists of a conjugate heat transfer problem coupled with the SST turbulence model for the fluid phases. The free surface separating liquid and vapor in the tank is tracked using the Volume of Fluid method (VOF). The model is solved using the software ANSYS Fluent. It is shown that the filling level of the tank substantially influences the boiling rate and the degree of stratification, as well as the flow structures generated by free convection. The relation among the insulation thickness and total heat leak is established, showing that the obtained increased heat ingress due to lower insulation thickness values leads to a rise in pressurization and boil-off rates.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Novel methodologies for solving the inverse unsteady heat transfer problem of estimating the boundary heat flux in continuous casting molds

  • Morelli, Umberto Emil
  • Barral, Patricia
  • Quintela Estévez, Peregrina
  • Rozza, Gianluigi
  • Stabile, Giovanni
In this article, we investigate the estimation of the transient mold-slab heat flux in continuous casting molds given some thermocouples measurements in the mold plates. Mathematically, we can see this problem as the estimation of a Neumann boundary condition given pointwise state observations in the interior of the domain. We formulate it in a deterministic inverse problem setting. After introducing the industrial problem, we present the mold thermal model and related assumptions. Then, we formulate the boundary heat flux estimation problem in a deterministic inverse problem setting using a sequential approach according to the sequentiality of the temperature measurements. We consider different formulations of the inverse problem. For each one, we develop novel direct methodologies exploiting a space parameterization of the heat flux and the linearity of the mold model. We construct these methods to be divided into a computationally expensive offline phase that can be computed before the process starts, and a cheaper online phase to be performed during the casting process. To conclude, we test the performance of the proposed methods in two benchmark cases
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Determination of Young modulus by using Rayleigh waves

  • Cao Rial, María Teresa
  • Quintela-Estévez, Peregrina
  • Moreno Gonzalez, Carlos Antonio
This is an ACCEPTED VERSION of the following published document: Cao-Rial, M. T., Moreno, C., & Quintela, P. (2020). Determination of Young modulus by using Rayleigh waves. Applied Mathematical Modelling, 77, 439-455. https://doi.org/10.1016/j.apm.2019.07.051. This manuscript version is made available under the CC-BY-NC-ND 4.0 license, [Abstract] The aim of this work is to provide a non-destructive testing technique to obtain the physical properties of a given material, based on a series of images, obtained through a non-invasive procedure, that capture the experimental propagation of a Rayleigh waves packet travelling through it, and allowing us to obtain the phase velocity of the waves packet. The proposed procedure involves a minimization technique that requires the numerical simulation of the travelling waves to obtain the optimal material parameters. Numerical results are compared with experimental data to validate the procedure., Acknowledgements The authors would like to acknowledge the cooperation of the members of the Optical Metrology research Group of the Applied Physics Department of the University of Vigo who provided the experimental data for this work as long as their input and experience on the matter. This work was partially supported by FEDER and Xunta de Galicia funds under the ED431C 2017/60 grant, by the Ministry of Economy, Industry and Competitiveness through the Plan Nacional de I+D+i (MTM2015-68275-R)., Xunta de Galicia; ED431C 2017/60