Pasar al contenido principal

DESARROLLO DE METODOLOGIAS MATEMATICAS PARA APOYAR LA MEJORA DE PROCESOS EN EL HORNO ALTO

PID2019-105615RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Transient thermal response with nonlocal radiation of a blast furnace main trough

  • Barral Rodiño, Patricia
  • Pérez Pérez, Luis Javier
  • Quintela Estévez, Peregrina
A mathematical model for the transient thermal behaviour of the main trough of a blast furnace (BF) is presented. The proposed model consists of the transient heat equation with mixed radiation-convection boundary conditions to model the cooling process. The heat equation is coupled with an integral equation posed on the inner boundary, which models the radiative heat exchange on the internal cavity formed by the trough and the refractory cover placed over the trough. The main scope of this work is to address the evolution of the temperature field during a full BF tapping. A reliable algorithm, capable of simulating entire trough campaigns, is presented. The open-source computing platform FEniCS is used to numerically solve the model using a finite element method. A manufactured solution test for the heat diffusion coupled with 2D nonlocal radiation is defined with the purpose of verifying the implementation, comparing the performance of different time discretization schemes and the adaptive time stepping algorithm. Concerning the BF tapping problem, the results show that during the time interval corresponding to a single tapping, the temperature in the radiation enclosure swiftly reaches the steady state value. Nevertheless, to obtain a steady state in the bulk of the solids, much longer time scales are needed due to the large thermal inertia of the structure
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Numerical simulation of the shear stress produced by the hot metal jet on the blast furnace runner

  • Barral Rodiño, Patricia
  • Nicolás Ávila, Begoña
  • Quintela Estévez, Peregrina
During steel casting process a jet of molten metal runs out of the blast furnace hearth and strikes the runner. The continuous impact of hot fluids causes significant damage to its surface, which is made of refractory concrete. In particular, the initial impact on the dry runner is expected to be critical. This work deals with the analysis of the mechanical impact on the runner through the numerical simulation of the process. We propose an incompressible turbulent isothermal Navier-Stokes model, where turbulence is modelled considering two models (standard and SST). The interface dynamics is described by applying the Volume of Fluid (VOF) method, while the surface tension vector is provided by the Continuum Surface model (CSF). Their numerical results are performed in 2D. A comparative analysis of the most suitable transient turbulent multiphase model is presented by simulating benchmark physical experiments. The shear stress arising from the impact of the jet on the runner is also analyzed. An improvement of the classical analytical expression given in [1] is proposed. Both, the chosen turbulence model, and the formulas to compute the shear stress are validated using two benchmark laboratory tests and three numerical experiments. Numerical results are given for the impact of the jet on the dry runner of the blast furnace
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Numerical simulation of the transient heat transfer in a blast furnace main trough during its complete campaign cycle

  • Barral Rodiño, Patricia
  • Pérez Pérez, Luis Javier
  • Quintela Estévez, Peregrina
To achieve higher blast furnace (BF) main trough availability and to minimize the frequency of reparations is a key concern in the steelmaking industry. For this purpose, strategies to assess refractory wear are required, which is heavily influenced by the temperature in the refractory linings. In this work, a mathematical model to assess the transient behaviour of the temperature in a cross-section of a BF main trough during a complete campaign is presented. The scope is to investigate the effect that the casting stops have on the temperature in the trough. A sequence of problems corresponding to each BF tapping and the subsequent stop is determined using process data of a BF. The open-source finite element computing platform FEniCS is employed to solve the model. The discretization and the numerical algorithm have been presented and validated with a manufactured solution test in a previous work. The numerical results show that the effect of the stops during these campaign cycles is non-negligible, preventing the bulk of the solid layers from reaching a steady state. Qualitative agreement with temperature measurements obtained with thermocouples embedded in the trough is observed. Since there is a significant degree of uncertainty concerning the placement of the devices, a minimization problem to adjust their positions within the corresponding feasible regions is proposed. At the identified positions, good levels of fit between the measured and the computed temperatures are achieved. The agreement decreases towards the end of the campaign cycle, being suggestive of severe refractory wear, especially at the laterals of the trough
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Mathematical perspective on XFEM implementation for models involving contribution on interfaces

  • Cao Rial, María Teresa
  • Moreno, C.
  • Quintela Estévez, Peregrina
Models involving interfaces with discontinuities or even singularities of some fields across them are very frequent in real life problems modelling. In the last decades, the use of the eXtended Finite Element Method (XFEM) instead of the traditional FEM has become more and more popular, mainly because of two advantages: the mesh of the domain can be independent of the interface position, therefore avoiding remeshing, and it allows to enrich an area with specific shape functions fitted to the particular properties (singularities, discontinuities) of the expected solution, obtaining more accurate results with less computational efforts. Nevertheless, a critical point of XFEM is its implementation since it varies from one problem to another, due to the different kind (and number) of degrees of freedom on each node. A diligent organization of nodes, degrees of freedom and enrichment functions is fundamental to achieve an efficient implementation. Our aim in this paper is to provide a common reference framework for the implementation of XFEM from a mathematical point of view, providing the readers with a set of tools that will allow them to apply it to any kind of problem. To this aim, we present a detailed description of XFEM implementation, with special emphasis on the terms that involve integration over interfaces. The proposed tools are presented in a general context, and as an example, we will apply them to a problem of solids mechanics. In particular, we will contextualize the procedure on a Rayleigh waves propagation problem in a cracked structure considering a Signorini contact condition on the crack sides.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Novel methodologies for solving the inverse unsteady heat transfer problem of estimating the boundary heat flux in continuous casting molds

  • Morelli, Umberto Emil
  • Barral, Patricia
  • Quintela Estévez, Peregrina
  • Rozza, Gianluigi
  • Stabile, Giovanni
In this article, we investigate the estimation of the transient mold-slab heat flux in continuous casting molds given some thermocouples measurements in the mold plates. Mathematically, we can see this problem as the estimation of a Neumann boundary condition given pointwise state observations in the interior of the domain. We formulate it in a deterministic inverse problem setting. After introducing the industrial problem, we present the mold thermal model and related assumptions. Then, we formulate the boundary heat flux estimation problem in a deterministic inverse problem setting using a sequential approach according to the sequentiality of the temperature measurements. We consider different formulations of the inverse problem. For each one, we develop novel direct methodologies exploiting a space parameterization of the heat flux and the linearity of the mold model. We construct these methods to be divided into a computationally expensive offline phase that can be computed before the process starts, and a cheaper online phase to be performed during the casting process. To conclude, we test the performance of the proposed methods in two benchmark cases
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Mathematical perspective on XFEM implementation for models involving contribution on interfaces

  • Cao Rial, María Teresa
  • Quintela-Estévez, Peregrina
  • Moreno Gonzalez, Carlos Antonio
[Abstract] Models involving interfaces with discontinuities or even singularities of some fields across them are very frequent in real life problems modelling. In the last decades, the use of the eXtended Finite Element Method (XFEM) instead of the traditional FEM has become more and more popular, mainly because of two advantages: the mesh of the domain can be independent of the interface position, therefore avoiding remeshing, and it allows to enrich an area with specific shape functions fitted to the particular properties (singularities, discontinuities) of the expected solution, obtaining more accurate results with less computational efforts. Nevertheless, a critical point of XFEM is its implementation since it varies from one problem to another, due to the different kind (and number) of degrees of freedom on each node. A diligent organization of nodes, degrees of freedom and enrichment functions is fundamental to achieve an efficient implementation. Our aim in this paper is to provide a common reference framework for the implementation of XFEM from a mathematical point of view, providing the readers with a set of tools that will allow them to apply it to any kind of problem. To this aim, we present a detailed description of XFEM implementation, with special emphasis on the terms that involve integration over interfaces. The proposed tools are presented in a general context, and as an example, we will apply them to a problem of solids mechanics. In particular, we will contextualize the procedure on a Rayleigh waves propagation problem in a cracked structure considering a Signorini contact condition on the crack sides, This work has been supported by FEDER, Xunta de Galicia, Spain funds under the ED431C 2017/60 and ED431C 2021/15 grants and by the Ministry of Science and Innovation, Spain through the Agencia Estatal de Investigación (PID2019-105615RB-I00/AEI / 10.13039/501100011033) and European Union Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No 823731 CONMECH., Xunta de Galicia ; ED431C 2017/60, Xunta de Galicia; ED431C 2021/15