Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Refined Element Discontinuous Numerical Analysis of Dry-Contact Masonry Arches

  • Pérez-Aparicio, José L.
  • Bravo, R.
  • Ortiz Rossini, Pablo
The behavior of buried masonry arches is studied in this article using the Discontinuous Deformation Analysis (DDA), a numerical method that allows for the physical simulation of the intrinsic structure dis- continuities since it is based on contact and friction among pseudo-rigid blocks. Two types of arches (or vaults) are studied with a specially developed computer program, one of semicircular and another of ovoidal shape. The loads are self-weight, lateral filling, embankment thrusts and concentrated (through a short distribution) forces close to the peak. These loads are transformed into point forces applied to the center of gravity of each block with simple formulae from classical mechanics. Equilibrium is reached in the whole structure through contact forces calculated with a standard contact algorithm: penalty plus Coulomb friction. DDA-macroblocks composed of linked (through penalty contact springs) pseudo-rigid blocks are for- mulated. This linkage allows for the simulation of collapse by instability or by stress compressive failure more accurately than traditional DDA analyses, for instance funicular polygons. The numerical results are compared with those of the experiments taken from the literature with, for most cases, very good agreement given the uncertainties on geometry and material properties and given the intrinsic quality dispersion of masonry structures. Collapse loads as function of number of joints, safety factors and limit point forces from the numerical and experimental results are compared. The hinges that appear prior to collapse are also compared, obtaining again for most cases very good agreement., J.L. Perez-Aparicio, R. Bravo were partially supported by the MFOM I+D (2004/38), all authors by MICIIN #BIA-2008-00522 and the first also by Polytechnic University of Valencia under Grant PAID 05-10-2674.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal numerical design of bucket elevators using discontinuous deformation analysis

  • Pérez Aparicio, José Luis
  • Bravo, R.
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Bucket elevators are efficient machines to transport granular materials in industrial and civil engineering applications. These materials are composed of hundreds, thousands or even more particles, the global behavior of which is defined by contact interactions. The first attempts to analyze the transportation of granular materials were treated by very simple continuum methods that do not take into account these interactions, producing simulations that do not fit the experimental results accurately. Given the internal discontinuity nature of granular media, it is reasonable to use numerical methods to model their behavior, such as discontinuous deformation analysis (DDA)-a member of the discrete element method family that started to be used in the 90s to analyze similar problems. The version of DDA used in the current work treats grains as rigid circular particles with friction, damping and eventually cohesion with the objective of simulating and analyzing in detail the discharge of granular materials with bucket elevators. A deterministic computer code has been implemented and validated against simplified analytical formulae and experimental results taken from the literature. This computer code is then used to obtain optimum two-dimensional bucket geometries under specific working conditions. The optimization aims to maximize transport distance and to minimize remaining material, taking into account bucket velocity and the properties of the grains. The resulting geometries are discussed and compared against standard designs., J.L. Perez-Aparicio, R. Bravo were partially supported by the MFOM I+D (2004/38), both by MICIIN #BIA 2008-00522 and the first also by Polytechnic University of Valencia under grant PAID 05-10-2674. J.J. Gomez-Hernandez was partially supported by MICIIN #CGL 2011-23295.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computation of eigenvalues in proportionally damped viscoelastic structures based on the fixed-point iteration

  • Lázaro, Mario|||0000-0003-4949-8295
  • Pérez Aparicio, José Luis
  • Epstein, M.
Linear viscoelastic structures are characterized by dissipative forces that depend on the history of the velocity response via hereditary damping functions. The free motion equation leads to a nonlinear eigenvalue problem characterized by a frequency-dependent damping matrix. In the present paper, a novel and efficient numerical method for the computation of the eigenvalues of linear and proportional or lightly non-proportional viscoelastic structures is developed. The central idea is the construction of two complex-valued functions of a complex variable, whose fixed points are precisely the eigenvalues. This important property allows the use of these functions in a fixed-point iterative scheme. With help of some results in fixed point theory, necessary conditions for global and local convergence are provided. It is demonstrated that the speed of convergence is linear and directly depends on the level of induced damping. In addition, under certain conditions the recursive method can also be used for the calculation of non-viscous real eigenvalues. In order to validate the mathematical results, two numerical examples are analyzed, one for single degree-of-freedom systems and another for multiple ones., The authors gratefully acknowledge the support of the Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674 and of the National Science and Research Council of Canada.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiphysics and Thermodynamic Formulations for Equilibrium and Non-equilibrium Interactions: Non-linear Finite Elements Applied to Multi-coupled Active Materials

  • Pérez-Aparicio, José L.
  • Palma, Roberto
  • Taylor, R.L.
[EN] Combining several theories this paper presents a general multiphysics framework applied to the study of coupled and active materials, considering mechanical, electric, magnetic and thermal fields. The framework is based on thermodynamic equilibrium and non-equilibrium interactions, both linked by a two-temperature model. The multi-coupled governing equations are obtained from energy, momentum and entropy balances; the total energy is the sum of thermal, mechanical and electromagnetic parts. The momentum balance considers mechanical plus electromagnetic balances; for the latter the Abraham rep- resentation using the Maxwell stress tensor is formulated. This tensor is manipulated to automatically fulfill the angular momentum balance. The entropy balance is for- mulated using the classical Gibbs equation for equilibrium interactions and non-equilibrium thermodynamics. For the non-linear finite element formulations, this equation requires the transformation of thermoelectric coupling and conductivities into tensorial form. The two-way thermoe- lastic Biot term introduces damping: thermomechanical, pyromagnetic and pyroelectric converse electromagnetic dynamic interactions. Ponderomotrix and electromagnetic forces are also considered. The governing equations are converted into a variational formulation with the resulting four-field, multi-coupled formalism implemented and val- idated with two custom-made finite elements in the research code FEAP. Standard first-order isoparametric eight-node elements with seven degrees of freedom (dof) per node (three displacements, voltage and magnetic scalar potentials plus two temperatures) are used. Non-linearities and dynamics are solved with Newton-Raphson and New- mark-b algorithms, respectively. Results of thermoelectric, thermoelastic, thermomagnetic, piezoelectric, piezomag- netic, pyroelectric, pyromagnetic and galvanomagnetic interactions are presented, including non-linear depen- dency on temperature and some second-order interactions., This research was partially supported by grants CSD2008-00037 Canfranc Underground Physics, Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674. The first author used the grant Generalitat Valenciana BEST/2014/232 for the completion of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elasto-thermoelectric non-linear, fully coupled, and dynamic finite element analysis of pulsed thermoelectrics

  • Pérez-Aparicio, José L.
  • Palma, Roberto
  • Moreno-Navarro, Pablo
This paper presents a numerical study on the influence of pulsed electric signals applied to the overcooling of thermoelectric devices. To this end, an experimental setup taken from the literature and a commercial cell are simulated using a complete, specially developed research finite element code. The electro-thermal coupling is extended to include the elastic field, demonstrating that the increment of cooling can produce mechanical failure. Numerical results are developed and the variation of overcooling versus pulse gain and versus duration is validated towards a new analytical expression and the experimental data. The issue of optimal intensity at steady-state is also newly developed. Thermal and mechanical trends are presented using constant and variable (with temperature) material properties for a single thermoelement. While some of the first trends are similar to those of published works, others are different or directly new, all closer to those of the experiments. The mechanical results have not been thoroughly studied until recently. The three-dimensional finite element mesh includes non-thermoelectric materials that are fundamental for the current study. Distribution of stresses during steady and transient states are shown inside the thermoelement, for five components and for the combined Tresca stress. Concentrations at corners of the lower side appear close to the cold face. Due to these concentrations, 27-node isoparametric, quadratic brick elements are used. It is shown that the mechanical field is an important factor in the design of pulsed thermoelectrics, since for practical applications the stress levels are close or slightly above the admissible limits., This research was partially supported by grants CSD2008-00037 Canfranc Underground Physics and Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiparametric computation of eigenvalues for linear viscoelastic structures

  • Lázaro, Mario|||0000-0003-4949-8295
  • Pérez-Aparicio, José L.
A new methodology for the computation of complex eigenvalues for multi-degree-of-freedom linear viscoelastic structures is presented. It is assumed that damping matrix does not only depends on the frequency but also on a set of parameters that control the dissipative mechanisms. Eigenvalues are then functions of a multi-variable array formed by damping parameters. The key idea is to approximate the eigenvalues as solutions of a specially developed differential equation. Proportional and non-proportional damping are studied separately. In addition, the error order and the computational complexity are rigorously analyzed. Numerical examples show very good agreement between proposed and exact solutions., This research was partially supported by the Grants CSD2008-00037 Canfranc Underground Physics and Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of hysteretic thermoelectric behavior in photovoltaic materials using the finite element method, extended thermodynamics and inverse problems

  • Palma, Roberto
  • Pérez-Aparicio, José L.
  • Bravo, R.
The main objective of the present work is to develop and prove a theoretical explanation based on the Extended Non-Equilibrium Thermodynamics (ENETs) for the hysteretical thermoelectric behavior observed in certain thin-film photovoltaic materials. The ENET introduces dissipative fluxes in the entropy balance that could explain this behavior. To verify this explanation from a numerical point of view, results are generated using a Finite Element (FE) formulation based on the ENET and already developed in previous publications by the authors. In addition, an identification Inverse Problem (IP) is formulated; a cost function is defined as the quadratic difference between experimental and numerical results and the IP is solved minimizing the cost function using genetic algorithms. The conclusion is that the loop-like distributions are due to energy dissipation introduced by dissipative fluxes that are closely related with relaxation times. Also, the FE-IP combination permits to find an approximated characterization of properties for several materials from single experimental curves. Finally, several numerical simulations are proposed for laboratory experiments to further validate the theoretical interpretation and to confirm the relation between relaxation times and hysteresis., This research was partially supported by the Grants CSD2008-00037 Canfranc Underground Physics, Excelencia Junta Andalucia P08-TEP-03641 and Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A viscous approach based on oscillatory eigensolutions for viscoelastically damped vibrating systems

  • Lázaro, Mario|||0000-0003-4949-8295
  • Pérez-Aparicio, José L.
  • Epstein, Marcelo
[EN] Dissipative mechanisms in linear multiple-degree-of-freedom viscoelastic systems are characterized by the dependence on the history of the velocity degrees-of-freedom via convolution integrals over kernel functions. As a result, damping matrices are frequency-dependent and, in general, state-space approach based methods are widely used for their resolution. This paper proposes a new approach suitable for modelling such systems via a viscous model with proportional damping, which approximates the response of the original viscoelastic system using the undamped eigenvectors together with the complex eigenvalues with oscillatory nature, neglecting those modes with non-viscous nature (negative real eigenvalues). It is rigorously demonstrated that the transfer function of any viscoelastic system can be expanded as the sum of the transfer function of certain viscous model and a residual term. The obtained viscous model, named Equivalent Viscous Model, is characteristic of each viscoelastic system. In order to study the bound of the residual term two indexes are introduced to describe, on one hand, the non-proportionality, or the modal decoupling capability of the damping matrix and, on the other hand, the damping level of the system. The proposed viscous model is validated through numerical examples simulating different conditions of proportionality and damping., The authors gratefully acknowledge the support of the Polytechnic University of Valencia under programs PAID 02-11-1828 and 05-10-2674 and of the National Science and Research Council of Canada.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An energy consistent frictional dissipating algorithm for particle contact problems

  • Bravo Pareja, Rafael
  • Pérez-Aparicio, José L.
  • Laursen, T.A.
An energy frictional dissipating algorithm (EFDA) for time integration of Coulomb frictional impact-contact problems is presented. With the use of the penalty method, and in the context of a conserving framework, linear and angular momenta are conserved, and energy is consistently dissipated. Previously published formulations were stable, forcing the energy dissipation to be monotonic to prevent unstable energy growth. The shortcoming of many was that they were not able to reproduce the real kinematics and dissipation of physical processes, provided by analytical formulations and experiments. EFDA formulates a conserving framework on the basis of a physical energy dissipation estimator. This framework uses an enhanced penalty contact model based on a spring and a dashpot, enforcing physical frictional energy dissipation, controlling gap vibrations, and modifying the velocities and contact forces during each time step. The result is that the dissipated energy, kinematics, and contact forces are consistent with the expected physical behavior. Energy frictional dissipating algorithm has been applied to four rigid-body frictional problems using the discrete element method. The first problem is the analysis of a disk moving on a flat rough surface; the second problem analyzes the kinematics and energy dissipation of elliptical particle impacts. Numerical solutions are compared with analytical ones in both problems. The motion and impact of two disks moving on a semicircular surface are studied in the third problem. Finally, the fourth problem simulates the collapse of a two-dimensional granular column, which is compared with the experimental results., R. Bravo and J. L. Perez-Aparicio were partially supported by the MFOM I+D (2004/38), MICIIN #BIA-2008-00522, and "Ayudas Investigacion" from UPV2010, Polytechnic University of Valencia under program PAID 05-10-2674.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Real Eigenvalues in Linear Viscoelastic Oscillators and the Non-viscous Set

  • Lázaro, Mario|||0000-0003-4949-8295
  • Pérez-Aparicio, José L.
In structural dynamics, energy dissipative mechanisms with nonviscous damping are characterized by their dependence on the time-history of the response velocity, which is mathematically represented by convolution integrals involving hereditary functions. The widespread Biot damping model assumes that such functions are exponential kernels, which modify the eigenvalues set so that as many real eigenvalues (named nonviscous eigenvalues) as kernels are added to the system. This paper is focused on the study of a mathematical characterization of the nonviscous eigenvalues. The theoretical results allow the bounding of a set belonging to the real negative numbers, called the nonviscous set, constructed as the union of closed intervals. Exact analytical solutions of the nonviscous set for one and two exponential kernels and approximated solutions for the general case of N kernels are developed. In addition, the nonviscous set is used to build closedform expressions to compute the nonviscous eigenvalues. The results are validated with numerical examples covering single and multiple degree-of-freedom systems where the proposed method is compared with other existing one-step approaches available in the literature., The authors gratefully acknowledge the support of the Polytechnic University of Valencia under Program Nos. PAID 02-11-1828 and 05-10-2674.